THE MEASUREMENT OF SURFACE TEMPERATURES ON GEAR TEETH DURING HIGH SURFACE PRESSURE WITH DISSIMILAR HARDENED GEARS

Author(s):  
Yasuyoshi TOZAKI ◽  
Naoya MATSUSHITA ◽  
Takuya GOTO ◽  
Yuji SUMITANI
1985 ◽  
Vol 40 (3-4) ◽  
pp. 219-222 ◽  
Author(s):  
Christoph Strobl ◽  
Lambert Six ◽  
Klaus Heckmann ◽  
Birgit Henkel ◽  
Klaus Ring

The bipolar main tetraether lipid (MPL) of Thermoplasma acidophilum has been shown to form typical liquid expanded films at the air-water interface. The limiting molecular area at the collaps pressure is approximately Ac=73 Å2 per molecule. Monopolar aiphytanyl diether lipids were found to occupy the same area at high surface pressure as MPL. Thus, it was concluded that in the monofilm only one of the two polar headgroups of the MPL molecules is hydrated, i.e. that the single MPL molecules arc oriented upright. The packing properties of MPT. in the monofilm are determined by the properties of the branched alkyl chains only; the polar head groups do not contribute to the space requirement in the film. The collaps pressure of the MPL film is approximately 39 mN m-1 at 8°C. At a surface pressure of π = 30 mN m-1 and 20 °C the film is stable for many hours.


2015 ◽  
Vol 108 (2) ◽  
pp. 85a
Author(s):  
Chen Shen ◽  
Jorge B. de la Serna ◽  
Bernd Struth ◽  
Beate Klösgen

2011 ◽  
Vol 24 (6) ◽  
pp. 1747-1762 ◽  
Author(s):  
Kirstie Stramler ◽  
Anthony D. Del Genio ◽  
William B. Rossow

Abstract The dense network of the Surface Heat Budget of the Arctic (SHEBA) observations is used to assess relationships between winter surface and atmospheric variables as the SHEBA site came under the influence of cyclonic and anticyclonic atmospheric circulation systems. Two distinct and preferred states of subsurface, surface, atmosphere, and clouds occur during the SHEBA winter, extending from the oceanic mixed layer through the troposphere and preceded by same-sign variations in the stratosphere. These states are apparent in distributions of surface temperature, sensible heat and longwave radiation fluxes, ocean heat conduction, cloud-base height and temperature, and in the atmospheric humidity and temperature structure. Surface and atmosphere are in radiative–turbulent–conductive near-equilibrium during a warm opaquely cloudy-sky state, which persists up to 10 days and usually occurs during the low surface pressure phase of a baroclinic wave, although occasionally occurs during the high surface pressure phase because of low, scattered clouds. Clouds occurring in this state have near-unity emissivity and the lowest bases in the vicinity of, or below, the temperature inversion peak. A cold radiatively clear-sky state persists up to two weeks, and occurs only in the high surface pressure phase of a baroclinic wave. The radiatively clear state has clouds that are too tenuous when surface based or, irrespective of opacity, located too far aloft to contribute significantly to the surface energy budget. There is a 13-K surface temperature difference between the two states, and atmospheric inversion peak temperatures are linearly related to the surface temperature in both states. The snow–sea ice interface temperature oscillates over the course of the winter season, as it cools during the radiatively clear state and is warmed from atmospheric emission above and ocean heat conduction from below during the opaquely cloudy state. Analysis of satellite data over the Arctic from 70°–90°N indicates that the radiatively clear and opaquely cloudy states observed at SHEBA may be representative of the entire Arctic basin. The results suggest that model formulation inadequacies should be easier to diagnose if modeled energy transfers are compared with observations using process-based metrics that acknowledge the bimodal nature of the Arctic ocean–ice–snow–atmosphere column, rather than monthly and regionally averaged quantities. Climate change projections of thinner Arctic sea ice and larger advective water vapor influxes into the Arctic could yield different frequencies of occupation of the radiatively clear and opaquely cloudy states and higher wintertime temperatures of SHEBA ocean, ice, snow, atmosphere, and clouds—in particular, a wintertime warming of the snow–sea ice interface temperature.


2002 ◽  
Vol 01 (05n06) ◽  
pp. 597-601 ◽  
Author(s):  
KUNIHARU IJIRO ◽  
JIN MATSUMOTO ◽  
MITSUHIKO MORISUE ◽  
MASATSUGU SHIMOMURA

Monolayers of thymine amphiphile containing azobenzene chromophore (Azo-Thy) were prepared on various aqueous oligonucleotide ( dA 30, d(GA) 15, d(GGA) 10) subphases. Pressure–area isotherms and reflection absorption spectra of the monolayers on dA 30 or d(GA) 15 solution showed that the H-aggregate of the azobenzene units was formed at higher surface pressure than 25 mN/m . In contrast, the monolayer on an aqueous d(GGA) 10 solution did not form any aggregates of the azobenzene units even at high surface pressure. Base-pair formation between Azo-Thy and template d(GGA) 10 could give free volume to the azobenzene units in the monolayer to prevent the aggregation of the azobenzene units at the air–water interface.


2017 ◽  
Author(s):  
Mohammed D. Al-Ajmi ◽  
Raed A. Al-Ajlan ◽  
Nasser M. Al-Hajri ◽  
Hussain A. Al-Quwaisim ◽  
Saleh I. Zamka ◽  
...  

Author(s):  
Lukas Seeholzer ◽  
Stefan Süssmaier ◽  
Fabian Kneubühler ◽  
Konrad Wegener

AbstractEspecially for slicing hard and brittle materials, wire sawing with electroplated diamond wires is widely used since it combines a high surface quality with a minimum kerf loss. Furthermore, it allows a high productivity by machining multiple workpieces simultaneously. During the machining operation, the wire/workpiece interaction and thus the material removal conditions with the resulting workpiece quality are determined by the material properties and the process and tool parameters. However, applied to machining of carbon fibre reinforced polymers (CFRP), the process complexity potentially increases due to the anisotropic material properties, the elastic spring back potential of the material, and the distinct mechanical wear due to the highly abrasive carbon fibres. Therefore, this experimental study analyses different combinations of influencing factors with respect to process forces, workpiece surface temperatures at the wire entrance, and the surface quality in wire sawing unidirectional CFRP material. As main influencing factors, the cutting and feed speeds, the density of diamond grains on the wire, the workpiece thickness, and the fibre orientation of the CFRP material are analysed and discussed. For the tested parameter settings, it is found that while the influence of the grain density is negligible, workpiece thickness, cutting and feed speeds affect the process substantially. In addition, higher process forces and workpiece surface temperatures do not necessarily deteriorate the surface quality.


2021 ◽  
Author(s):  
Gabriel H. Campos

The premise of this work is to address aircraft seat comfort. This thesis presents the development of an automatic morphing backrest used to reduce pressure experienced by the passenger from the seat. Uncomfortable, high surface pressure zones on the backrest can be alleviated by decentralizing the occupant’s weight. The improved pressure distribution is intended to decrease discomfort during flight while taking different comfort/discomfort models into consideration. Pressure distribution data from the embedded sensor mat is used to compute the seat’s cushion deflection and corresponding backrest contour caused by the passenger’s weight. The surfaces of interest - the passenger’s back and the seat, are modelled and discretized. The discretized surface contact pressure is integrated into the hyperelastic contact model to determine the loading profile. From this, the current pressure distribution and the cushion’s surface change are computed and used in the control system to create the corresponding actuation of the surface.


Sign in / Sign up

Export Citation Format

Share Document