Evolution and Performance of High-Speed A-Scan based on Real-Time Optical Spectrum Fourier Transformation

2018 ◽  
Author(s):  
Fabio Falconi ◽  
Yongwoo Park ◽  
José Azaña ◽  
Antonella Bogoni ◽  
Antonio Malacarne
Keyword(s):  
Real Time ◽  
Fourier Transformation ◽  
High Speed ◽  
Optical Spectrum ◽  
And Performance

A ROS-Simulink Real-Time Communication Bridge Using UDP With a Driver-in-the-Loop Application

2016 ◽  
Author(s):  
Mohamed Wahba ◽  
Robert Leary ◽  
Nicolás Ochoa-Lleras ◽  
Jariullah Safi ◽  
Sean Brennan
Keyword(s):  
Operating System ◽  
Real Time ◽  
High Speed ◽  
Performance Metrics ◽  
Proof Of Concept ◽  
Physical Separation ◽  
Robot Operating System ◽  
Time Latency ◽  
And Performance ◽  
Fast Transmission

This paper presents implementation details and performance metrics for software developed to connect the Robot Operating System (ROS) with Simulink Real-Time (SLRT). The communication takes place through the User Datagram Protocol (UDP) which allows for fast transmission of large amounts of data between the two systems. We use SLRT’s built-in UDP communication and binary packing blocks to send and receive the data over a network. We use implementation metrics from several examples to illustrate the effectiveness and drawbacks of this bridge in a real-time environment. The time latency of the bridge is analyzed by performing loop-back tests and obtaining the statistics of the time delay. A proof of concept experiment is presented that utilizes two laboratories that ran a driver-in-the-loop system despite a large physical separation. This work provides recommendations for implementing data integrity measures as well as the potential to use the system with other applications that demand high speed real-time communication.

Real-Time Optical Spectrum Fourier Transformation

2012 ◽  
Author(s):  
Antonio Malacarne ◽  
Yongwoo Park ◽  
Ming Li ◽  
Sophie LaRochelle ◽  
José Azaña
Keyword(s):  
Real Time ◽  
Fourier Transformation ◽  
Optical Spectrum

High speed interferometric device for real-time correction of aero-optic effects

1995 ◽  
Author(s):  
Rod Clark ◽  
John Karpinsky ◽  
Gregg Borek ◽  
Eric Johnson
Keyword(s):  
Real Time ◽  
High Speed ◽  
Time Correction

Electrical Probing and Surface Imaging of Deep Sub-Micron Integrated Circuits

1999 ◽  
Author(s):  
Kenneth Krieg ◽  
Richard Qi ◽  
Douglas Thomson ◽  
Greg Bridges
Keyword(s):  
High Resolution ◽  
Integrated Circuits ◽  
Real Time ◽  
High Speed ◽  
Time Signal ◽  
Surface Imaging ◽  
Atomic Force ◽  
Submicron Structures ◽  
High Resolution Images ◽  
Capacitive Loading

Abstract A contact probing system for surface imaging and real-time signal measurement of deep sub-micron integrated circuits is discussed. The probe fits on a standard probe-station and utilizes a conductive atomic force microscope tip to rapidly measure the surface topography and acquire real-time highfrequency signals from features as small as 0.18 micron. The micromachined probe structure minimizes parasitic coupling and the probe achieves a bandwidth greater than 3 GHz, with a capacitive loading of less than 120 fF. High-resolution images of submicron structures and waveforms acquired from high-speed devices are presented.

Low-Cost High-Speed Techniques for Real-Time Simulation of Power Electronic Systems

2007 ◽  
Author(s):  
R. E. Crosbie ◽  
J. J. Zenor ◽  
R. Bednar ◽  
D. Word ◽  
N. G. Hingorani
Keyword(s):  
Real Time ◽  
High Speed ◽  
Low Cost ◽  
Electronic Systems ◽  
Power Electronic ◽  
Real Time Simulation ◽  
Time Simulation

scholarly journals Spatially Resolved Experimental Modal Analysis on High-Speed Composite Rotors Using a Non-Contact, Non-Rotating Sensor

Sensors ◽  
2021 ◽  
Vol 21 (14) ◽  
pp. 4705
Author(s):  
Julian Lich ◽  
Tino Wollmann ◽  
Angelos Filippatos ◽  
Maik Gude ◽  
Juergen Czarske ◽  
...  
Keyword(s):  
High Speed ◽  
Natural Frequencies ◽  
Mode Shapes ◽  
Fiber Reinforced ◽  
Structural Dynamic ◽  
Spatially Resolved ◽  
Glass Fiber Reinforced ◽  
Vibration Responses ◽  
And Performance

Due to their lightweight properties, fiber-reinforced composites are well suited for large and fast rotating structures, such as fan blades in turbomachines. To investigate rotor safety and performance, in situ measurements of the structural dynamic behaviour must be performed during rotating conditions. An approach to measuring spatially resolved vibration responses of a rotating structure with a non-contact, non-rotating sensor is investigated here. The resulting spectra can be assigned to specific locations on the structure and have similar properties to the spectra measured with co-rotating sensors, such as strain gauges. The sampling frequency is increased by performing consecutive measurements with a constant excitation function and varying time delays. The method allows for a paradigm shift to unambiguous identification of natural frequencies and mode shapes with arbitrary rotor shapes and excitation functions without the need for co-rotating sensors. Deflection measurements on a glass fiber-reinforced polymer disk were performed with a diffraction grating-based sensor system at 40 measurement points with an uncertainty below 15 μrad and a commercial triangulation sensor at 200 measurement points at surface speeds up to 300 m/s. A rotation-induced increase of two natural frequencies was measured, and their mode shapes were derived at the corresponding rotational speeds. A strain gauge was used for validation.

Accelerating laser processes with a smart two-dimensional polygon mirror scanner for ultra-fast beam deflection

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Florian Roessler ◽  
André Streek
Keyword(s):  
Energy Distribution ◽  
Real Time ◽  
Laser Processing ◽  
High Speed ◽  
Beam Deflection ◽  
Two Dimensional ◽  
Heat Accumulation ◽  
Field Programmable ◽  
Drill Holes ◽  
Average Laser

Abstract In laser processing, the possible throughput is directly scaling with the available average laser power. To avoid unwanted thermal damage due to high pulse energy or heat accumulation during MHz-repetition rates, energy distribution over the workpiece is required. Polygon mirror scanners enable high deflection speeds and thus, a proper energy distribution within a short processing time. The requirements of laser micro processing with up to 10 kW average laser powers and high scan speeds up to 1000 m/s result in a 30 mm aperture two-dimensional polygon mirror scanner with a patented low-distortion mirror configuration. In combination with a field programmable gate array-based real-time logic, position-true high-accuracy laser switching is enabled for 2D, 2.5D, or 3D laser processing capable to drill holes in multi-pass ablation or engraving. A special developed real-time shifter module within the high-speed logic allows, in combination with external axis, the material processing on the fly and hence, processing of workpieces much larger than the scan field.

scholarly journals Development of Real-Time Time Gated Digital (TGD) OFDR Method and Its Performance Verification

Sensors ◽  
2021 ◽  
Vol 21 (14) ◽  
pp. 4865
Author(s):  
Kinzo Kishida ◽  
Artur Guzik ◽  
Ken’ichi Nishiguchi ◽  
Che-Hsien Li ◽  
Daiji Azuma ◽  
...  
Keyword(s):  
Real Time ◽  
Optical Fibers ◽  
High Speed ◽  
Oil And Gas ◽  
Scattered Light ◽  
Oil And Gas Industry ◽  
High Signal ◽  
Chirp Pulse ◽  
Sound Waves ◽  
Industry Applications

Distributed acoustic sensing (DAS) in optical fibers detect dynamic strains or sound waves by measuring the phase or amplitude changes of the scattered light. This contrasts with other distributed (and more conventional) methods, such as distributed temperature (DTS) or strain (DSS), which measure quasi-static physical quantities, such as intensity spectrum of the scattered light. DAS is attracting considerable attention as it complements the conventional distributed measurements. To implement DAS in commercial applications, it is necessary to ensure a sufficiently high signal-noise ratio (SNR) for scattered light detection, suppress its deterioration along the sensing fiber, achieve lower noise floor for weak signals and, moreover, perform high-speed processing within milliseconds (or sometimes even less). In this paper, we present a new, real-time DAS, realized by using the time gated digital-optical frequency domain reflectometry (TGD-OFDR) method, in which the chirp pulse is divided into overlapping bands and assembled after digital decoding. The developed prototype NBX-S4000 generates a chirp signal with a pulse duration of 2 μs and uses a frequency sweep of 100 MHz at a repeating frequency of up to 5 kHz. It allows one to detect sound waves at an 80 km fiber distance range with spatial resolution better than a theoretically calculated value of 2.8 m in real time. The developed prototype was tested in the field in various applications, from earthquake detection and submarine cable sensing to oil and gas industry applications. All obtained results confirmed effectiveness of the method and performance, surpassing, in conventional SM fiber, other commercially available interrogators.

Sign in / Sign up

Export Citation Format

Share Document