Treated Clay Mineral as Adsorbent for the Removal of Heavy Metals from Aqueous Solution

2021 ◽  
Author(s):  
Paul Egwuonwu Dim ◽  
Mutsee Termtanun
Keyword(s):  
Heavy Metals ◽  
Adsorption Capacity ◽  
Adsorption Equilibrium ◽  
Kinetic Constant ◽  
Specific Area ◽  
Batch Method ◽  
Chromium Vi ◽  
Removal Of Heavy Metals ◽  
Pseudo Second Order ◽  
Best Fit

The decontamination of heavy metals present in aquatic bodies is a significant challenge that requires urgent attention. Analytical methods such as BET, XRF, SEM-EDX, and XRD was employed to characterize the raw clay (NT) and acid treated clay (AT). The adsorption of Cr (VI) and Fe (III) onto AT was performed using the batch method. The effects of time, adsorbent dose, temperature, and pH show that the optimal conditions are 50 min, 0.3 g, 35°C, and pH 6. The surface area of AT was 389.37 m2/g, and the adsorption equilibrium time of AT was 50 min. Langmuir isotherms had the best fit. Adsorption capacity is 18.15 and 39.80 mg/g for Cr (VI) and Fe (III) ions, respectively. An increase in area considerably improved the adsorption capacity of AT in the surface specific area. The interaction of Cr (VI) and Fe (III) ions onto AT indicated spontaneous and endothermic reaction. The chromium (VI) kinetic constant (k2 = 1.679) was faster compared to Fe (III) rate constant (k2 = 0.0526). It agreed correctly with the pseudo-second-order equation. The sum square error (SSE) value obtained confirmed the best-fit equations. The percent adsorbed for Cr (VI) and Fe (III) is 74 and 90%. The results revealed that iron has a higher affinity towards AT than chromium. The study revealed that AT could be suitable and effective in the adsorption of chromium and iron in the wastewater medium.

Kinetics of Heavy Metals Adsorption on Gravels Derived From Subsurface Flow Constructed Wetland

2020 ◽  
pp. 193-213
Author(s):  
Celestin Defo ◽  
Ravinder Kaur
Keyword(s):  
Heavy Metals ◽  
Constructed Wetland ◽  
Contact Period ◽  
Batch Experiments ◽  
Removal Of Heavy Metals ◽  
Pseudo Second Order ◽  
Adsorption Rates ◽  
Kinetics Of ◽  
Best Fit ◽  
Concentration Levels

Adsorption kinetics of Ni, Cr, and Pb on gravels collected from constructed wetland was studied at varied metal concentrations and contact period for estimating the removal of heavy metals from wastewater. Batch experiments were conducted by shaking 120 ml of metal solutions having 5 concentration levels each of Ni (1.0, 2.0, 3.5, 5.0 and 6.0 mg l-1), Cr (1.0, 2.0, 3.0, 4.5 and 6.0 mg l-1), and Pb (1.0, 3.0, 6.0, 8.0 and 12.0 mg l-1) with 50 g of gravels for as function of time. Adsorption of Ni, Cr, and Pb on gravels ranged from 34.8 to 47.2, 42.7-54.9, and 47.5-56.9%, indicating their removal in the order: Pb > Cr > Ni. Freundlich model showed a good fit for Ni and Cr (R2>0.9) while Langmuir model fitted better for Pb (R2= 0.7). The pseudo-second-order model showed the best fit to simulate the adsorption rates of these metals on gravel.

scholarly journals A Study on Adsorption of Heavy Metals with Zeolite and FeS Media

2020 ◽  
Vol 42 (7) ◽  
pp. 349-359
Author(s):  
Gimin Lee ◽  
Gyuri Kim ◽  
Sungkyu Choi ◽  
Tae-jin Lee
Keyword(s):  
Heavy Metals ◽  
Heavy Metal ◽  
Reaction Kinetics ◽  
Adsorption Capacity ◽  
Second Order ◽  
Maximum Adsorption Capacity ◽  
Adsorption Characteristics ◽  
Removal Of Heavy Metals ◽  
Pseudo Second Order ◽  
Kinetics Of

Objectives:Adsorption characteristics in aqueous solution were investigated to effectively remove heavy metals by the crystallization of FeS and reaction kinetics were analyzed to compare with heavy metal adsorption characteristics of zeolite.Methods:The adsorption characteristics of each media were analyzed using Langmuir adsorption isotherm, and the adsorption reaction kinetics of heavy metals (Pb, Cu, Zn) on zeolite and FeS media were analyzed by a pseudo-first or pseudo-second order reaction kinetics.Results and Discussion:The maximum adsorption capacity of zeolite was highest in Pb, and the adsorption preference was in the order of Pb>Cu>Zn. In the case of FeS media, Cu was found to have a higher adsorption capacity than Pb or Zn, and the adsorption preference was observed to be Cu>Pb>Zn. It was found that the adsorption mechanism is based on chemical adsorption (chemisorption) because adsorption of each heavy metal onto zeolite or FeS media is more suitable for pseudo-second order kinetics.Conclusions:It was found that the removal of heavy metals through FeS media has a different pattern from zeolite, and when comparing the adsorption capacity of each media, it was found that FeS media is more effective for Zn or Cu except Pb.

Mercury Removal from Wastewater by Steamed Hoof Powder

1999 ◽  
Vol 40 (7) ◽  
pp. 109-116 ◽  
Author(s):  
M. H. Ansari ◽  
A. M. Deshkar ◽  
P. S. Kelkar ◽  
D. M. Dharmadhikari ◽  
M. Z. Hasan ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Adsorption Capacity ◽  
Adsorption Process ◽  
Adsorption Equilibrium ◽  
Light Metal ◽  
Mercury Removal ◽  
High Adsorption ◽  
Surface Sites ◽  
Ph Values ◽  
High Adsorption Capacity

Steamed Hoof Powder (SHP), size < 53μ, was observed to have high adsorption capacity for Hg(II) with >95% removal from a solution containing 100 mg/L of Hg(II) with only 0.1% (W/V) concentration of SHP. The SHP has good settling properties and gives clear and odour free effluent. Studies indicate that pH values between 2 and 10 have no effect on the adsorption of Hg(II) on SHP. Light metal ions like Na+, K+, Ca2+ and Mg2+ up to concentrations of 500 mg/L and heavy metals like Cu2+, Zn2+, Cd2+, Co2+, Pb2+, Ni2+, Mn2+, Cr3+, Cr6+, Fe2+ and Fe3+ up to concentrations of 100 mg/L do not interfere with the adsorption process. Anions like sulphate, acetate and phosphate up to concentrations of 200 mg/L do not interfere. Chloride interferes in the adsorption process when Hg(II) concentration is above 9.7 mg/L. The adsorption equilibrium was established within two hours. Studies indicate that adsorption occurs on the surface sites of the adsorbent.

Competitive Biosorption of Pb(II) and Cu(II) by Functionalised Micropogonias undulates Scales

2020 ◽  
Vol 13 ◽  
Author(s):  
Joshua O. Ighalo ◽  
Ibrahim O. Tijani ◽  
Oluwaseun J. Ajala ◽  
Fisayo O. Ayandele ◽  
Omodele A. Eletta ◽  
...  
Keyword(s):  
Adsorption Capacity ◽  
Low Cost ◽  
Fish Scales ◽  
Wet Impregnation ◽  
Monolayer Adsorption ◽  
Competitive Biosorption ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Ft Ir ◽  
Best Fit

Background: Modified bio-based adsorbents from plant sources can be used for pollution remediation by adsorption due to their low cost and availability in large quantities. Objective: In this study, the competitive biosorption of Pb(II) and Cu(II) by Micropogonias undulates functionalised fish scales (FFS) was conducted. The functionalisation was done by wet impregnation with Fe2+. Method: The biosorbent was characterised by Fourier Transform Infrared Spectroscopy (FT-IR), Scanning Electron Microscopy with Energy-Dispersive X-ray Spectroscopy (SEM-EDS) and Branueur–Emmett–Teller (BET) analyses. Results: The major constituents in the FFS were calcium and phosphorus from the collagen and apatite on the scales. Optimum removal efficiency for both metals was >99% at 10 g/l dosage. It was observed that the Langmuir isotherm model and the pseudo second order kinetics model were the best fit for the experimental data. The monolayer adsorption capacity of FFS for Pb(II) and Cu(II) was observed to be 96.15 mg/g and 100 mg/g respectively. Conclusion: The study revealed that the competitive biosorption of heavy metals can be achieved (at a good adsorption capacity) using functionalised Micropogonias undulates fish scales.

scholarly journals Sawdust for the Removal of Heavy Metals from Water: A Review

Molecules ◽  
2021 ◽  
Vol 26 (14) ◽  
pp. 4318
Author(s):  
Elie Meez ◽  
Abbas Rahdar ◽  
George Z. Kyzas
Keyword(s):  
Heavy Metals ◽  
Adsorption Mechanism ◽  
Freundlich Isotherm ◽  
Order Kinetic ◽  
Suitable Material ◽  
Removal Of Heavy Metals ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
And Control ◽  
Environmental Agencies

The threat of the accumulation of heavy metals in wastewater is increasing, due to their abilities to inflict damage to human health, especially in the past decade. The world’s environmental agencies are trying to issue several regulations that allow the management and control of random disposals of heavy metals. Scientific studies have heavily focused on finding suitable materials and techniques for the purification of wastewaters, but most solutions have been rejected due to cost-related issues. Several potential materials for this objective have been found and have been compared to determine the most suitable material for the purification process. Sawdust, among all the materials investigated, shows high potential and very promising results. Sawdust has been shown to have a good structure suitable for water purification processes. Parameters affecting the adsorption mechanism of heavy metals into sawdust have been studied and it has been shown that pH, contact time and several other parameters could play a major role in improving the adsorption process. The adsorption was found to follow the Langmuir or Freundlich isotherm and a pseudo second-order kinetic model, meaning that the type of adsorption was a chemisorption. Sawdust has major advantages to be considered and is one of the most promising materials to solve the wastewater problem.

Removal of Heavy Metals from Aqueous Solution by Hydroxyapatite/Chitosan Composite

2013 ◽  
Vol 789 ◽  
pp. 176-179 ◽  
Author(s):  
Eny Kusrini ◽  
Nofrijon Sofyan ◽  
Dwi Marta Nurjaya ◽  
Santoso Santoso ◽  
Dewi Tristantini
Keyword(s):  
Heavy Metals ◽  
Aqueous Solution ◽  
Metal Ions ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Removal Of Heavy Metals ◽  
Sem Micrograph ◽  
Pseudo Second Order ◽  
Chitosan Composite

Hydroxyapatite/chitosan (HApC) composite has been prepared by precipitation method and used for removal of heavy metals (Cr6+, Zn2+and Cd2+) from aqueous solution. The HAp and 3H7C composite with HAp:chitosan ratio of 3:7 (wt%) were characterized by Fourier transform infrared spectroscopy, X-ray diffraction and scanning electron microscopy-energy dispersive X-ray spectroscopy. The SEM results showed that HAp is spherical-shaped and crystalline, while chitosan has a flat structure. SEM micrograph of 3H7C composite reveals crystalline of HAp uniformly spread over the surface of chitosan. The crystal structure of HAp is maintained in 3H7C composite. Chitosan affects the adsorption capacity of HAp for heavy metal ions; it binds the metal ions as well as HAp. The kinetic data was best described by the pseudo-second order. Surface adsorption and intraparticle diffusion take place in the mechanism of adsorption process. The binding of HAp powder with chitosan made the capability of composite to removal of Cr6+, Zn2+and Cd2+from aqueous solution effective. The order of removal efficiency (Cr6+> Cd2+> Zn2+) was observed.

scholarly journals Kinetic Study of the Bioadsorption of Methylene Blue on the Surface of the Biomass Obtained from the Algae D. antarctica

2018 ◽  
Vol 2018 ◽  
pp. 1-12 ◽  
Author(s):  
Jhonatan R. Guarín ◽  
Juan Carlos Moreno-Pirajan ◽  
Liliana Giraldo
Keyword(s):  
Methylene Blue ◽  
Kinetic Study ◽  
Adsorption Capacity ◽  
Scientific Community ◽  
Second Order ◽  
Maximum Adsorption Capacity ◽  
Pseudo Second Order ◽  
Best Fit ◽  
Total Elimination ◽  
Purification Of Water

Currently, there is a great pollution of water by the dyes; due to this, several studies have been carried out to remove these compounds. However, the total elimination of these pollutants from the aquatic effluents has represented a great challenge for the scientific community, for which it is necessary to carry out investigations that allow the purification of water. In this work, we studied the bioadsorption of methylene blue on the surface of the biomass obtained from the algae D. antarctica. This material was characterized by SEM and FTIR. To the data obtained in the biosorption experiments, different models of biosorption and kinetics were applied, finding that the best fit to the obtained data is given by applying the pseudo-second-order models and the Toth model, respectively. It was also determined that the maximum adsorption capacity of MB on the surface of the biomass is 702.9 mg/g, which shows that this material has great properties as a bioadsorbent.

scholarly journals The Novel Use of Saraca thaipingensis Leaf Powder as Potential Biosorbent Material for the Removal of Chromium(VI)

2015 ◽  
Vol 3 (3) ◽  
pp. 35-39
Author(s):  
Sannasi Palsan ◽  
Chai Swee Fern ◽  
Stephanie Bernardine ◽  
Lim Fan Shiang
Keyword(s):  
Heavy Metals ◽  
Particle Size ◽  
Contact Time ◽  
Low Cost ◽  
Peninsular Malaysia ◽  
The Novel ◽  
Batch Experiments ◽  
Chromium Vi ◽  
Removal Of Heavy Metals ◽  
Leaf Powder

Saraca thaipingensis or ‘Gapis’ tree, classified under the Fabaceae family is a native of Taiping; copious over Peninsular Malaysia and Southeast Asia. The withered and fallen dead leaves were collected from INTI International University’s garden walkway. To date, literature has yet to capture the use of S. thaipingensis tree parts or refuse as potential biosorbent material for the removal of heavy metals thus verifying the novelty of this study. Batch experiments were carried out with the leaf powder to study the effects of dosage, particle size and contact time towards Cr(VI) removal (%) at 1-100 mg/L. Results showed that Cr(VI) removal increased from 52.22% to 99.31% (p < 0.05) with increase in biosorbent dosage (0.005, 0.010, 0.015, 0.020, 0.025 and 0.050 g). The different particle size ranges tested were: 107-125, 126-150, 151-250, 251-500, and 501- 1000 ?m. Highest Cr(VI) removal of 99.53% was obtained with the 151-250 ?m particle size; further size decrease did not yield more removal (p > 0.05). The optimal Cr(VI) removal was recorded after 45 min (99.62%) and 90 min (99.76%) contact time (p > 0.05). Further characterization and optimization studies are being carried out to develop a novel, sustainable, low cost yet effective leaf powder based biosorbent material.

scholarly journals Equilibrium and Kinetic Study of Lead and Copper Ion Adsorption on Chitosan-Grafted-Polyacrylic Acid Synthesized by Surface Initiated Atomic Transfer Polymerization

Molecules ◽  
2018 ◽  
Vol 23 (9) ◽  
pp. 2218 ◽  
Author(s):  
Carlos Grande-Tovar ◽  
William Vallejo ◽  
Fabio Zuluaga
Keyword(s):  
Adsorption Capacity ◽  
Polyacrylic Acid ◽  
Adsorption Process ◽  
Kinetic Constant ◽  
Copper Ion ◽  
Toxic Metal ◽  
Maximum Adsorption Capacity ◽  
Order Model ◽  
Equilibrium Studies ◽  
Pseudo Second Order

In this work, we synthesized chitosan grafted-polyacrylic acid (CS-g-PA) through surface-initiated atom transfer radical polymerization (SI-ATRP). We also studied the adsorption process of copper and lead ions onto the CS-g-PA surface. Adsorption equilibrium studies indicated that pH 4.0 was the best pH for the adsorption process and the maximum adsorption capacity over CS-g-PA for Pb2+ ions was 98 mg·g−1 and for Cu2+ it was 164 mg·g−1, while for chitosan alone (CS), the Pb2+ adsorption capacity was only 14.8 mg·g−1 and for Cu2+ it was 140 mg·g−1. Furthermore, the adsorption studies indicated that Langmuir model describes all the experimental data and besides, pseudo-second-order model was suitable to describe kinetic results for the adsorption process, demonstrating a larger kinetic constant of the process was larger for Pb2+ than Cu2+. Compared to other adsorbents reported, CS-g-PA had comparable or even superior adsorbent capacity and besides, all these results suggest that the new CS-g-PA polymers had potential as an adsorbent for hazardous and toxic metal ions produced by different industries.

scholarly journals Effect of Modified Eggshell on Adsorption Capacity of Chromium(VI) from Aqueous Solution

2020 ◽  
Vol 32 (7) ◽  
pp. 1549-1556
Author(s):  
Abdulaziz Ali Alomari
Keyword(s):  
Aqueous Solution ◽  
Thermal Treatment ◽  
Adsorption Capacity ◽  
Rhombohedral Structure ◽  
Chromium Vi ◽  
Protein Fibers ◽  
Residual Protein ◽  
Langmuir Isotherm Model ◽  
Pseudo Second Order ◽  
Static Conditions

The aim of this work is to investigate the use of eggshell for adsorption of Cr(VI) from aqueous solution and the effect of thermal treatment as well as coating with Fe2O3 of eggshell on the extraction percent of Cr(VI). The XRD, FTIR and SEM techniques proved that the eggshell mainly composed of calcite rhombohedral structure in addition to a trace of quartz silica residual protein fibers. Heating at 550 ºC does not decompose eggshell but decomposes the residual protein. The effect of pH, weight of eggshell adsorbent, contact time, and initial concentration of Cr(VI) ions on the adsorption of Cr(VI) on eggshell sorbents were determined under static conditions by the batch equilibrium technique. The sorption kinetic as well as mechanistic isotherm parameters of Cr(VI) on the eggshell sorbent, were analyzed. It was concluded that the adsorption of Cr(VI) on eggshell increases as pH increases in the range 3-7, then, with decreases at higher pH. The extraction percent of Cr(VI) increases with an increase in the dosage of eggshell sorbents. The optimum dosage of eggshell adsorbents was found to be 5 g after which the extraction percent of Cr(VI) did not marked increase. The extraction percent of Cr(VI) by eggshell sorbents rapidly increases within 60 min followed by a slower extraction after that when maximum adsorption was reported. The adsorption capacity of Cr(VI) ions is slightly reduced in case of heated eggshell due to the change that occurs in the pore size distribution and structure of eggshell during heating. Hence, the thermal treatment and coating with Fe2O3 do not affect the chemical structure of eggshell sorbents. The adsorption kinetics data were best fitted with the pseudo-second-order equation and the adsorption isotherms were best fitted with the Langmuir isotherm model.

Sign in / Sign up

Export Citation Format

Share Document