scholarly journals Sawdust for the Removal of Heavy Metals from Water: A Review

Molecules ◽  
2021 ◽  
Vol 26 (14) ◽  
pp. 4318
Author(s):  
Elie Meez ◽  
Abbas Rahdar ◽  
George Z. Kyzas
Keyword(s):  
Heavy Metals ◽  
Adsorption Mechanism ◽  
Freundlich Isotherm ◽  
Order Kinetic ◽  
Suitable Material ◽  
Removal Of Heavy Metals ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
And Control ◽  
Environmental Agencies

The threat of the accumulation of heavy metals in wastewater is increasing, due to their abilities to inflict damage to human health, especially in the past decade. The world’s environmental agencies are trying to issue several regulations that allow the management and control of random disposals of heavy metals. Scientific studies have heavily focused on finding suitable materials and techniques for the purification of wastewaters, but most solutions have been rejected due to cost-related issues. Several potential materials for this objective have been found and have been compared to determine the most suitable material for the purification process. Sawdust, among all the materials investigated, shows high potential and very promising results. Sawdust has been shown to have a good structure suitable for water purification processes. Parameters affecting the adsorption mechanism of heavy metals into sawdust have been studied and it has been shown that pH, contact time and several other parameters could play a major role in improving the adsorption process. The adsorption was found to follow the Langmuir or Freundlich isotherm and a pseudo second-order kinetic model, meaning that the type of adsorption was a chemisorption. Sawdust has major advantages to be considered and is one of the most promising materials to solve the wastewater problem.

scholarly journals Conversion of fisheries waste as magnetic hydroxyapatite bionanocomposite for the removal of heavy metals from groundwater

2017 ◽  
Vol 18 (4) ◽  
pp. 1406-1419
Author(s):  
F. Elmi ◽  
R. Chenarian Nakhaei ◽  
H. Alinezhad
Keyword(s):  
Heavy Metals ◽  
Freundlich Isotherm ◽  
Spectroscopic Techniques ◽  
Order Kinetic ◽  
Fish Scale ◽  
X Ray Diffraction ◽  
X Ray ◽  
Removal Of Heavy Metals ◽  
Order Kinetic Model ◽  
Ir Spectroscopic

Abstract This study is the first report of its type demonstrating the synthesis of mHAP on the basis of magnetic functionalization with nHAP, which were synthesized using Rutilus frisii kutum fish scale as a benign fishery waste by-product. The mHAP was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X-ray diffraction (EDX), and Fourier transform infrared (FT-IR) spectroscopic techniques. The XRD pattern confirmed the formation of a single-phase nHAP without any extra steady phases. It was also found that the pseudo-second-order kinetic model gave a satisfactory fit to the experimental data (R2 = 0.99). The maximum removal percentages of Cu and Zn ions in optimal conditions (adsorbent dosage at 0.1 g, 30 min contact time at 25 ± 1 °C and pH = 5 ± 0.1) by mHAP were 97.1% and 93.8%, respectively. Results also demonstrated that mHAP could be recycled for up to five cycles in the case of copper and zinc. The Langmuir isotherm was proved to have a better correlation compared with that of the Freundlich isotherm. The thermodynamic parameters indicated that it was a spontaneously endothermic reaction. In conclusion, mHAP could be regarded as a powerful candidate for efficient biosorbent, capable of adsorbing heavy metals from aqueous solutions.

Removal of Heavy Metals Cd(II) and Al(III) from Aqueous Solutions by an Eco-Friendly Biosorbent

2019 ◽  
Vol 800 ◽  
pp. 181-186 ◽  
Author(s):  
Nour El Houda Larbi ◽  
Djilali Redha Merouani ◽  
Hakim Aguedal ◽  
Abdelkader Iddou ◽  
Amine Khelifa
Keyword(s):  
Heavy Metals ◽  
Aqueous Solutions ◽  
Order Kinetic ◽  
Human Beings ◽  
Removal Of Heavy Metals ◽  
Initial Ph ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Water Pollutant ◽  
Langmuir And Freundlich Models

Heavy metals are very toxic water pollutant. Their presence not only affect human beings but also animals and vegetation because of their mobility in aqueous ecosystem, toxicity and non-biodegradability [1].in the aim of removing heavy metals from aqueous solutions, an eco-friendly biosorbent was prepared from lagoon sludge by a humification process. The biosorption of Cd2+ and Al3+ ions from aqueous solutions was investigated as a function of initial pH,contact time, initial metal ions concentration, and temperature. Langmuir and Freundlich models were used to determine the sorption isotherm. Optimum pH for the removal of cadmium and aluminum was found respectively to be around 6 and 4 [2] . The equilibrium was obtained in 60 min with the pseudo-second-order kinetic model. The Langmuir model was a better fit with the experimental data for both cadmium and aluminum adsorption with a regression coefficient up to 0.99 and Qmax of 100 and 142 mg.g-1 respectively for Cd2+and Al3+.

The Removal of Heavy Metals from Aqueous Solution by Utilizing Modified β-Cyclodextrin Microspheres

2010 ◽  
Vol 113-116 ◽  
pp. 632-638
Author(s):  
Feng Yu Li ◽  
Xiao Mei Sun ◽  
Bu Hai Li
Keyword(s):  
Heavy Metals ◽  
Correlation Coefficients ◽  
Freundlich Isotherm ◽  
Kinetic Studies ◽  
Heavy Metal Concentration ◽  
Second Order ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Removal Of Heavy Metals ◽  
Pseudo Second Order

Batch adsorption experiments were carried out to remove heavy metals Cu(II)and Ni(II) by pyromellitic dianhydride (PMDA) grafted β-Cyclodextrin (β-CD). The effects concerning the pH of the solution, contact time and initial heavy metal concentration were studied and discussed. The adsorption values increased significantly after a large number of carboxyl groups were gragfted on the microspheres surface. In order to investigate the mechanism of sorption, adsorption data were modeled using the pseudo-first-order and pseudo-second-order kinetic equation. It was found that kinetic studies showed good correlation coefficients for a pseudo-second-order kinetic model, confirming that the sorption rate was controlled by chemical adsorption. The equilibrium process was better described by the Langmuir isotherm than the Freundlich isotherm. XPS analysis further confirmed that the carboxyl group which grafted on the surface of the β-CD microspheres play a very important role in the removal of heavy metals.

scholarly journals Optimization of process parameters for heavy metals biosorption onto mustard waste biomass

2016 ◽  
Vol 14 (1) ◽  
pp. 175-187 ◽  
Author(s):  
Lăcrămioara (Negrilă) Nemeş ◽  
Laura Bulgariu
Keyword(s):  
Heavy Metals ◽  
Aqueous Media ◽  
Order Kinetic ◽  
Waste Biomass ◽  
Solution Ph ◽  
Biosorption Process ◽  
Optimization Of Process Parameters ◽  
Removal Of Heavy Metals ◽  
Equilibrium Data ◽  
Order Kinetic Model

AbstractMustard waste biomass was tested as a biosorbent for the removal of Pb(II), Zn(II) and Cd(II) from aqueous solution. This strategy may be a sustainable option for the utilization of such wastes. The influence of the most important operating parameters of the biosorption process was analyzed in batch experiments, and optimal conditions were found to include initial solution pH 5.5, 5.0 g biosorbent/L, 2 hours of contact time and high temperature. Kinetics analyses show that the maximum of biosorption was quickly reached and could be described by a pseudo-second order kinetic model. The equilibrium data were well fitted by the Langmuir model, and the highest values of maximum biosorption capacity were obtained with Pb(II), followed by Zn(II) and Cd(II). The thermodynamic parameters of the biosorption process (ΔG, ΔH and ΔS) were also evaluated from isotherms. The results of this study suggest that mustard waste biomass can be used for the removal of heavy metals from aqueous media.

scholarly journals Efficient Congo Red Removal Using Porous Cellulose/Gelatin/Sepiolite Gel Beads: Assembly, Characterization, and Adsorption Mechanism

Polymers ◽  
2021 ◽  
Vol 13 (22) ◽  
pp. 3890
Author(s):  
Chenlu Jiao ◽  
Die Liu ◽  
Nana Wei ◽  
Jiannan Gao ◽  
Fan Fu ◽  
...  
Keyword(s):  
Congo Red ◽  
Adsorption Mechanism ◽  
Batch Adsorption ◽  
Order Kinetic ◽  
Dye Wastewater ◽  
Step Method ◽  
Gel Beads ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Highly Porous

Porous sustainable cellulose/gelatin/sepiolite gel beads were fabricated via an efficient ‘hydrophilic assembly–floating droplet’ two-step method to remove Congo red (CR) from wastewater. The beads comprised microcrystalline cellulose and gelatin, forming a dual network framework, and sepiolite, which acted as a functional component to reinforce the network. The as-prepared gel beads were characterized using FTIR, SEM, XRD, and TGA, with the results indicating a highly porous structure that was also thermally stable. A batch adsorption experiment for CR was performed and evaluated as a function of pH, sepiolite addition, contact time, temperature, and initial concentration. The kinetics and isotherm data obtained were in agreement with the pseudo-second-order kinetic model and the Langmuir isotherm, with a maximum monolayer capacity of 279.3 mg·g−1 for CR at 303 K. Moreover, thermodynamic analysis demonstrated the spontaneous and endothermic nature of the dye uptake. Importantly, even when subjected to five regeneration cycles, the gel beads retained 87% of their original adsorption value, suggesting their suitability as an efficient and reusable material for dye wastewater treatments.

Mathematical Modelling for Copper and Lead Adsorption on Coffee Grounds

2017 ◽  
Author(s):  
Jurgita Seniūnaitė ◽  
Rasa Vaiškūnaitė ◽  
Kristina Bazienė
Keyword(s):  
Heavy Metals ◽  
Mathematical Modelling ◽  
Adsorption Kinetics ◽  
Adsorption Process ◽  
Freundlich Isotherm ◽  
Sorption Process ◽  
Second Order ◽  
Order Kinetic ◽  
Coffee Grounds ◽  
Pseudo Second Order

Research studies on the adsorption kinetics are conducted in order to determine the absorption time of heavy metals on coffee grounds from liquid. The models of adsorption kinetics and adsorption diffusion are based on mathe-matical models (Cho et al. 2005). The adsorption kinetics can provide information on the mechanisms occurring be-tween adsorbates and adsorbents and give an understanding of the adsorption process. In the mathematical modelling of processes, Lagergren’s pseudo-first- and pseudo-second-order kinetics and the intra-particle diffusion models are usually applied. The mathematical modelling has shown that the kinetics of the adsorption process of heavy metals (copper (Cu) and lead (Pb)) is more appropriately described by the Lagergren’s pseudo-second-order kinetic model. The kinetic constants (k2Cu = 0.117; k2Pb = 0,037 min−1) and the sorption process speed (k2qeCu = 0.0058–0.4975; k2qePb = 0.021–0.1661 mg/g per min) were calculated. After completing the mathematical modelling it was calculated that the Langmuir isotherm better reflects the sorption processes of copper (Cu) (R2 = 0.950), whilst the Freundlich isotherm – the sorption processes of lead (Pb) (R2 = 0.925). The difference between the mathematically modelled and experimen-tally obtained sorption capacities for removal of heavy metals on coffee grounds from aqueous solutions is 0.059–0.164 mg/l for copper and 0.004–0.285 mg/l for lead. Residual concentrations of metals in a solution showed difference of 1.01 and 0.96 mg/l, respectively.

scholarly journals The Removal of Uranium and Thorium from Their Aqueous Solutions by 8-Hydroxyquinoline Immobilized Bentonite

Minerals ◽  
2019 ◽  
Vol 9 (10) ◽  
pp. 626 ◽  
Author(s):  
Salah ◽  
Gaber ◽  
Kandil
Keyword(s):  
Aqueous Solutions ◽  
Metal Ions ◽  
Langmuir Isotherm ◽  
Freundlich Isotherm ◽  
Order Kinetic ◽  
X Ray Diffraction ◽  
Solution Ph ◽  
X Ray ◽  
Order Kinetic Model ◽  
Pseudo Second Order

The sorption of uranium and thorium from their aqueous solutions by using 8-hydroxyquinoline modified Na-bentonite (HQ-bentonite) was investigated by the batch technique. Na-bentonite and HQ-bentonite were characterized by X-ray fluorescence (XRF), X-ray diffraction (XRD), scanning electron microscopy (SEM), and Fourier Transform Infrared (FTIR) spectroscopy. Factors that influence the sorption of uranium and thorium onto HQ-bentonite such as solution pH, contact time, initial metal ions concentration, HQ-bentonite mass, and temperature were tested. Sorption experiments were expressed by Freundlich and Langmuir isotherms and the sorption results demonstrated that the sorption of uranium and thorium onto HQ-bentonite correlated better with the Langmuir isotherm than the Freundlich isotherm. Kinetics studies showed that the sorption followed the pseudo-second-order kinetic model. Thermodynamic parameters such as ΔH°, ΔS°, and ΔG° indicated that the sorption of uranium and thorium onto HQ-bentonite was endothermic, feasible, spontaneous, and physical in nature. The maximum adsorption capacities of HQ-bentonite were calculated from the Langmuir isotherm at 303 K and were found to be 63.90 and 65.44 for U(VI) and Th(IV) metal ions, respectively.

scholarly journals The Presence of Cu Facilitates Adsorption of Tetracycline (TC) onto Water Hyacinth Roots

2018 ◽  
Vol 15 (9) ◽  
pp. 1982 ◽  
Author(s):  
Xin Lu ◽  
Beibei Tang ◽  
Qi Zhang ◽  
Lizhu Liu ◽  
Ruqin Fan ◽  
...  
Keyword(s):  
Water Hyacinth ◽  
Freundlich Isotherm ◽  
Root Surface ◽  
Interactive Effects ◽  
Order Kinetic ◽  
Batch Experiments ◽  
Adsorption Data ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Ph Range

Batch experiments were conducted to investigate the adsorption characteristics of tetracycline (TC), and the interactive effects of copper (Cu) on the adsorption of TC onto water hyacinth roots. TC removal efficiency by water hyacinth roots was ranging from 58.9% to 84.6%, for virgin TC, 1:1 TC-Cu and 1:2 TC-Cu. The Freundlich isotherm model and the pseudo-second-order kinetic model fitted the adsorption data well. Thermodynamics parameters ΔG0 for TC were more negative in the TC plus Cu than the TC-only treatments, indicating the spontaneity of TC adsorption increased with increasing of Cu concentrations. An elevated temperature was associated with increasing adsorption of TC by water hyacinth roots. The additions of Cu(II) significantly increased TC adsorption onto water hyacinth roots within the pH range 4 to 6, because copper formed a strong metal bridge between root surface and TC molecule, facilitating the adsorption of TC by roots. However, Cu(II) hindered TC adsorption onto water hyacinth roots on the whole at pH range from 6–10, since the stronger electrostatic repulsion and formation of CuOH+ and Cu(OH)2. Therefore, the interaction between Cu(II) and TC under different environmental conditions should be taken into account to understand the environmental behavior, fate, and ecotoxicity of TC.

scholarly journals Construction of Novel Polymerizable Ionic Liquid Microemulsions and the In Situ Synthesis of Poly(Ionic Liquid) Adsorbents

Nanomaterials ◽  
2019 ◽  
Vol 9 (3) ◽  
pp. 454 ◽  
Author(s):  
Aili Wang ◽  
Shuhui Li ◽  
Hou Chen ◽  
Ying Liu ◽  
Xiong Peng
Keyword(s):  
Ionic Liquid ◽  
Adsorption Process ◽  
Freundlich Isotherm ◽  
In Situ Synthesis ◽  
Scattering Data ◽  
Order Kinetic ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Poly Ionic Liquid

This paper reports the successful construction of novel polymerizable ionic liquid microemulsions and the in situ synthesis of poly(ionic liquid) adsorbents for the removal of Zn2+ from aqueous solution. Dynamic light-scattering data were used to confirm the polymerization media and to illustrate the effect of the crosslinker dosage on the droplet size of the microemulsion. FTIR and thermal analysis were employed to confirm the successful preparation of the designed polymers and characterize their thermostability and glass transition-temperature value. The optimization of the adsorption process indicates that the initial concentration of Zn2+, pH, adsorbent dosage and contact time affected the adsorption performance of poly(ionic liquid)s toward Zn2+. Furthermore, our research revealed that the adsorption process can be effectively described by the pseudo second-order kinetic model and the Freundlich isotherm model.

Removal of fluoride from aqueous solution by adsorption onto Kanuma mud

2010 ◽  
Vol 62 (8) ◽  
pp. 1888-1897 ◽  
Author(s):  
Nan Chen ◽  
Zhenya Zhang ◽  
Chuanping Feng ◽  
Miao Li ◽  
Rongzhi Chen ◽  
...  
Keyword(s):  
Adsorption Process ◽  
Fluoride Concentration ◽  
Freundlich Isotherm ◽  
Order Kinetic ◽  
Solution Ph ◽  
Intra Particle Diffusion ◽  
Order Kinetic Model ◽  
Pseudo Second Order ◽  
Solid Liquid Interface ◽  
Solid Liquid

Kanuma mud, a geomaterial, is used as an adsorbent for the removal of fluoride from water. The influences of contact time, solution pH, adsorbent dosage, initial fluoride concentration and co-existing ions were investigated by batch equilibration studies. The rate of adsorption was rapid with equilibrium being attained after about 2 h, and the maximum removal of fluoride was obtained at pH 5.0–8.0. The Freundlich isotherm model was found to represent the measured adsorption data well. The negative value of the thermodynamic parameter ΔG suggests the adsorption of fluoride by Kanuma mud was spontaneous, the endothermic nature of adsorption was confirmed by the positive ΔH value. The negative ΔS value for adsorbent denoted decreased randomness at the solid/liquid interface. The adsorption process using Kanuma mud followed the pseudo-second-order kinetic model. Fluoride uptake by the Kanuma mud was a complex process and intra-particle diffusion played a major role in the adsorption process. It was found that adsorbed fluoride could be easily desorbed by washing the adsorbent with a solution of pH 12. This indicates the material could be easily recycled.

Sign in / Sign up

Export Citation Format

Share Document