scholarly journals Blades Optimization for Maximum Power Output of Vertical Axis Wind Turbine

2021 ◽  
Vol 10 (3) ◽  
pp. 585-595
Author(s):  
Ahmad Adnan Shoukat ◽  
Adnan Aslam Noon ◽  
Muhammad Anwar ◽  
Hafiz Waqar Ahmed ◽  
Talha Irfan Khan ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Vertical Axis ◽  
Edge Length ◽  
Research Network ◽  
Power Coefficient ◽  
Vertical Axis Wind Turbine ◽  
Low Wind Speed ◽  
Edge Profile ◽  
Power Yield

Wind power is a significant and urging sustainable power source asset to petroleum derivatives. Wind machines, for example, H-Darrieus vertical pivot wind turbines (VAWTs) have increased much notoriety in research network throughout the most recent couple of decades because of their applications at destinations having moderately low wind speed. Be that as it may, it is noticed that such wind turbines have low effectiveness. The point of this examination is to plan rotor cutting edges which could create most extreme power yield and execution. Different plan factors, for instance, harmony length, pitch edge, rotor distance across, cutting edge length and pitch point are explored to upgrade the presentation of VAWT. Rotor cutting edges are manufactured using the NACA-0030 structure and tried in wind burrow office and contrast its outcomes and DSM 523 profile. Numerical simulations are performed to get best geometry and stream conduct for achieving greatest power. It is seen that for higher tip-speed-proportion (TSR), shorter harmony length and bigger distance across the rotor (i.e., lower robustness) yields higher effectiveness in NACA 0030. Nevertheless, for lower TSR, the more drawn out agreement length and slighter distance across rotor (i.e., higher strength) gives better implementation. The pitch point is - 2° for TSR = 3 and - 3° for TSR = 2.5. The most extreme power yield of the wind turbine is acquired for the sharp edge profile NACA 0030. Besides, instantaneous control coefficient, power coefficient (CP) is the greatest reason for azimuthal edge of 245° and least esteem for 180°.

Optimized Small Vertical Axis Wind Turbine (VAWT), Phase I

2021 ◽  
Author(s):  
Moshe Zilberman ◽  
Abdelaziz Abu Sbaih ◽  
Ibrahim Hadad
Keyword(s):  
Wind Energy ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Cost Effective ◽  
Clean Energy ◽  
Vertical Axis ◽  
Low Noise ◽  
Power Coefficient ◽  
Vertical Axis Wind Turbine ◽  
Different Types

Abstract Wind energy has become an important resource for the growing demand for clean energy. In 2020 wind energy provided more than 6% of the global electricity demand. It is expected to reach 7% at the end of 2021. The installation growth rate of small wind turbines, though, is relatively slow. The reasons we are interested in the small vertical axis wind turbines are their low noise, environmentally friendly, low installation cost, and capable of being rooftop-mounted. The main goal of the present study is an optimization process towards achieving the optimal cost-effective vertical wind turbine. Thirty wind turbine models were tested under the same conditions in an Azrieli 30 × 30 × 90 cm low-speed wind tunnel at 107,000 Reynolds number. The different types of models were obtained by parametric variations of five basic models, maintaining the same aspect ratio but varying the number of bucket phases, the orientation angles, and the gaps between the vanes. The best performing turbine model was made of one phase with two vanes of non-symmetric bipolynomial profiles that exhibited 0.2 power coefficient, relative to 0.16 and 0.13 that were obtained for symmetrical polynomial and the original Savonius type turbines, respectively. Free rotation, static forces and moments, and dynamic moments and power were measured for the sake of comparison and explanation for the variations in performances of different types of turbines. CFD calculations were used to understand the forces and moment behaviors of the optimized turbine.

scholarly journals An experimental study of the optimal design parameters of a wind power tower used to improve the performance of vertical axis wind turbines

2018 ◽  
Vol 10 (9) ◽  
pp. 168781401879954
Author(s):  
Soo-Yong Cho ◽  
Sang-Kyu Choi ◽  
Jin-Gyun Kim ◽  
Chong-Hyun Cho
Keyword(s):  
Experimental Study ◽  
Optimal Design ◽  
Wind Turbine ◽  
Wind Power ◽  
Wind Turbines ◽  
Vertical Axis ◽  
Power Coefficient ◽  
Design Parameters ◽  
Vertical Axis Wind Turbine ◽  
Vertical Axis Wind Turbines

In order to augment the performance of vertical axis wind turbines, wind power towers have been used because they increase the frontal area. Typically, the wind power tower is installed as a circular column around a vertical axis wind turbine because the vertical axis wind turbine should be operated in an omnidirectional wind. As a result, the performance of the vertical axis wind turbine depends on the design parameters of the wind power tower. An experimental study was conducted in a wind tunnel to investigate the optimal design parameters of the wind power tower. Three different sizes of guide walls were applied to test with various wind power tower design parameters. The tested vertical axis wind turbine consisted of three blades of the NACA0018 profile and its solidity was 0.5. In order to simulate the operation in omnidirectional winds, the wind power tower was fabricated to be rotated. The performance of the vertical axis wind turbine was severely varied depending on the azimuthal location of the wind power tower. Comparison of the performance of the vertical axis wind turbine was performed based on the power coefficient obtained by averaging for the one periodic azimuth angle. The optimal design parameters were estimated using the results obtained under equal experimental conditions. When the non-dimensional inner gap was 0.3, the performance of the vertical axis wind turbine was better than any other gaps.

The Straight-Bladed Morphing Vertical Axis Wind Turbine

2016 ◽  
Author(s):  
David MacPhee ◽  
Asfaw Beyene
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Low Cost ◽  
Vertical Axis ◽  
Power Coefficient ◽  
Vertical Axis Wind Turbine ◽  
Pitch Control ◽  
Control Schemes ◽  
Horizontal Axis Wind Turbines ◽  
Novel Concept

Blade pitch control has been extremely important for the development of Horizontal-Axis Wind Turbines (HAWTs), allowing for greater efficiency over a wider range of operational regimes when compared to rigid-bladed designs. For Vertical-Axis Wind Turbines (VAWTs), blade pitching is inherently more difficult due to a dependence of attack angle on turbine armature location, shaft speed, and wind speed. As a result, there have been very few practical pitch control schemes put forward for VAWTs, which may be a major reason why this wind turbine type enjoys a much lower market share as compared to HAWTs. To alleviate this issue, the flexible, straight-bladed vertical-axis turbine is presented, which can passively adapt its geometry to local aerodynamic loadings and serves as a low-cost blade pitch control strategy increasing efficiency and startup capabilities. Using two-dimensional fluid-structure action simulations, this novel concept is compared to an identical rigid one and is proven to be superior in terms of power coefficient due to decreased torque minima. Moreover, due to the flexible nature of the blades, the morphing turbine achieves less severe oscillatory loadings. As a result, the morphing blade design is expected to not only increase efficiency but also system longevity without additional system costs usually associated with active pitch control schemes.

scholarly journals CFD Investigation of A New Elliptical-Bladed Multistage Savonius Rotors

2020 ◽  
Vol 9 (3) ◽  
pp. 383-392
Author(s):  
Khalid Mrigua ◽  
Abdelghani Toumi ◽  
Mounia Zemamou ◽  
Bader Ouhmmou ◽  
Yahya Lahlou ◽  
...  
Keyword(s):  
Aspect Ratio ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Vertical Axis ◽  
Power Coefficient ◽  
Low Wind Speed ◽  
Coefficient Increase ◽  
Savonius Wind Turbine ◽  
Low Efficiency ◽  
Two Stages

The Savonius-conventional wind turbine is a class of wind turbines designed with a vertical axis. It has a good starting capacity and   an insensitivity to wind direction. It works relatively at low wind speed in an easy installation. Savonius wind turbine faces major drawbacks, including some of the low efficiency and high negative torque created by the returning blade. Many attempts have been undertaken to optimize the blade’s shape to increase the performance of these wind turbines. The vertical axis is still under development. The elliptical-blades with a cut angle equal 47.50° have recently shown enhanced performance. In this study, we investigate the effect of Elliptical-bladed multistage Savonius Rotors (rotor aspect ratio, stage aspect ratio) on the performance by means of numerical simulation. The results obtained by comparison of one, two, and three-stage rotors indicate that the maximum power coefficient increase with a number of the stages (for the rotors with similar RAR of 0.7). Moreover, for the rotors with similar SAR of 0.7, the two stages have the highest performance than others.©2020. CBIORE-IJRED. All rights reserved

Wind Tunnel Experiment on the Aerodynamic Interaction Between Vertical Axis Wind Turbine Pair

2021 ◽  
Author(s):  
Hao Su ◽  
Haoran Meng ◽  
Jia Guo ◽  
Timing Qu ◽  
Liping Lei
Keyword(s):  
Wind Tunnel ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Vertical Axis ◽  
Power Coefficient ◽  
Vertical Axis Wind Turbine ◽  
Power Performance ◽  
Array Configuration ◽  
Aerodynamic Interaction ◽  
Positive Effect

Abstract Wind energy has attracted worldwide attention as a pollution-free and widely distributed renewable energy source. Increasing the power density by optimizing the arrangement of wind turbines has been a popular field of research in recent years. In the present work, a systematic study on the influence of array configuration on vertical axis wind turbines is made through wind tunnel experiments. Firstly, the power performance of an isolated vertical axis wind turbine at different tip speed ratios is tested as a benchmark of comparison. Multiple situations of two-turbine configurations are then tested and the results are compared with the isolated wind turbine. The power coefficient of the turbine pair increases by 34% when the turbines are 2.4 rotor diameters apart and rotate in the same direction. In the counter-rotating co-leeward case, it is demonstrated that the turbine pairs will have a positive effect on each other when they are separated by 2.1 rotor diameters to 2.4 rotor diameters. The lateral spacing between the counter-rotating co-windward turbine pair should be greater than 1.5 rotor diameters to avoid turbulence interference between the rotors.

scholarly journals Power Enhancement of a Vertical Axis Wind Turbine Equipped with an Improved Duct

Energies ◽  
2021 ◽  
Vol 14 (18) ◽  
pp. 5780
Author(s):  
Mohammad Hassan Ranjbar ◽  
Behnam Rafiei ◽  
Seyyed Abolfazl Nasrazadani ◽  
Kobra Gharali ◽  
Madjid Soltani ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Wind Turbines ◽  
Flow Characteristics ◽  
Maximum Velocity ◽  
Leading Edge ◽  
Vertical Axis ◽  
Power Coefficient ◽  
Vertical Axis Wind Turbine ◽  
Numerical Solver ◽  
Main Components

Efforts to increase the power output of wind turbines include Diffuser Augmented Wind Turbines (DAWT) or a shroud for the rotor of a wind turbine. The selected duct has three main components: a nozzle, a diffuser, and a flange. The combined effect of these components results in enriched upstream velocity for the rotor installed in the throat of the duct. To obtain the maximum velocity in the throat of the duct, the optimum angles of the three parts have been analyzed. A code was developed to allow all the numerical steps including changing the geometries, generating the meshes, and setting up the numerical solver simultaneously. Finally, the optimum geometry of the duct has been established that allows a doubling of the flow velocity. The flow characteristics inside the duct have also been analyzed in detail. An H-Darrieus Vertical Axis Wind Turbine (VAWT) has been simulated inside the optimized duct. The results show that the power coefficient of the DAWT can be enhanced up to 2.9 times. Deep dynamic stall phenomena are captured perfectly. The duct advances the leading-edge vortex generation and delays the vortex separation.

scholarly journals Performance Analysis of Highway Wind Turbine Enhanced with Wind Guide Vanes Using the Taguchi Method

CFD letters ◽  
2021 ◽  
Vol 13 (3) ◽  
pp. 25-42
Author(s):  
Mohamad Zahid Mazlan ◽  
Fazila Mohd Zawawi ◽  
Teeab Tahzib ◽  
Kamarulafizam Ismail ◽  
Syahrullail Samion
Keyword(s):  
Taguchi Method ◽  
Wind Turbine ◽  
Wind Velocity ◽  
Guide Vane ◽  
Vertical Axis ◽  
Power Coefficient ◽  
Vertical Axis Wind Turbine ◽  
Guide Vanes ◽  
Moving Vehicle ◽  
Low Wind Speed

Considerable efforts have been made by researchers to study the interaction between moving vehicles and wind turbines. The Savonius vertical-axis wind turbine was chosen due to its effectiveness in low-wind speed conditions. Speeding vehicles produce a scattered and non-uniform wind flow with disturbances. Hence, to prevent a negative torque, a row of wind guide vane panels was arranged in front of the blades of a wind turbine. The wind guide vane had the shape of an NACA4412 aerofoil to reduce the loss of wind energy, and to further increase wind velocity. A number of CFD simulations were designed using the Taguchi method to determine the optimum conditions for the power coefficient of the wind turbine in terms of the effects of three factors, namely, the distance between the guide vanes (d), the angle of the guide vanes (?), and the speed of the moving car (VC). An orthogonal array of L9(33) was designed. In addition, to observe the effects of the wind velocity induced by the moving vehicle, the wind turbine was incorporated with one degree of freedom (1DOF). The results showed that the speed of the moving car played a major role in determining the power coefficient. The order of influence of each factor was ranked as VC > ? > d. The performance of the wind turbine was sensitive to the speed of the car and the angle of the guide vanes, whereas it was insensitive to the distance between the guide vanes. Furthermore, the analysis of the signal-to-noise (S/N) ratio suggested that the optimal combination of factors for a maximum power coefficient were d = 0.4m, ? = 30°, and VC =30m/s. The optimum setting increased the Cp to 26% compared to the Cp that was produced without the installation of the guide vanes.

Active Blade Pitch Control for Straight Bladed Darrieus Vertical Axis Wind Turbine of New Design

2013 ◽  
Vol 569-570 ◽  
pp. 668-675 ◽  
Author(s):  
P.D. Chougule ◽  
S.R.K. Nielsen ◽  
Biswajit Basu
Keyword(s):  
Wind Speed ◽  
Wind Turbines ◽  
Pitch Angle ◽  
Vertical Axis ◽  
Power Coefficient ◽  
Vertical Axis Wind Turbine ◽  
Stream Tube ◽  
Pitch Control ◽  
Low Wind Speed ◽  
Blade Pitch Angle

As Development of smallvertical axis wind turbines (VAWT) for urban use is becoming an interestingtopic both within industry and academia. However, there are few new designs ofvertical axis turbines which are customized for building integration. These aregetting importance because they operate at low rotational speed producing veryless noise during operation, although these are less efficient than HorizontalAxis Wind Turbines (HAWT). The efficiency of a VAWT has been significantlyimproved by H-Darrieus VAWT design based on double airfoil technology asdemonstrated by the authors in a previous publication. Further, it is well knowthat the variation of the blade pitch angle during the rotation improves thepower efficiency. A blade pitch variation is implemented by active blade pitchcontrol, which operates as per wind speed and position of the blade withrespect to the rotor. A double multiple stream tube method is used to determinethe performance of the H-Darrieus VAWT. The power coefficient is compared withthat of a fixed pitch and a variable pitch double airfoil blade VAWT. It isdemonstrated that an improvement in power coefficient by 20% is achieved andthe turbine could start at low wind speed

Swept Blade for Performance Improvement on a Vertical Axis Wind Turbine

2020 ◽  
Author(s):  
Jie Su ◽  
Yaoran Chen ◽  
Dai Zhou ◽  
Zhaolong Han ◽  
Yan Bao
Keyword(s):  
Wind Turbine ◽  
Wind Farm ◽  
Vertical Axis ◽  
Aerodynamic Performance ◽  
Power Coefficient ◽  
Vertical Axis Wind Turbine ◽  
Static Pressure Distribution ◽  
Low Wind Speed ◽  
Turbine Wake ◽  
Wind Turbine Wake

Abstract The vertical axis wind turbine (VAWT) is considered an important device to utilize the renewable and sustainable wind energy. However, the relatively lower power coefficient has hampered its development. Therefore, this paper attempts to investigate the effect of swept blade employed in a VAWT on the enhancement in aerodynamic performance. A series of swept blades were studied in a small VAWT rotor, and the RANS SST k-ω turbulence model was utilized to simulate the flow field. The numerical model was validated against experimental data, and the aerodynamic performance was investigated with respect to force coefficients, vorticity distribution, static pressure distribution, and wind turbine wake, respectively. The results indicated that the swept blade could effectively increase power outputs by about 20% for the wind turbine. By reducing the drag coefficient, a high lift-drag ratio was achieved. And this configuration prevented the blade from suffering severe dynamic stall. Besides, the swept blade changed the distribution of low wind speed area in the wind turbine wake, which should be considered in the wind farm. It was concluded that this work provided a new way for the practical design and optimization of wind turbine.

scholarly journals MODELING AND SIMULATION OF THE VERTICAL AXIS WIND TURBINE BY QBLADE SOFTWARE

2020 ◽  
Vol 2 (02) ◽  
pp. 181-188
Author(s):  
MERAD ◽  
Asmae BOUANANI ◽  
Mama BOUCHAOUR
Keyword(s):  
Wind Energy ◽  
Wind Turbine ◽  
Wind Turbines ◽  
Urban Areas ◽  
Clean Energy ◽  
Vertical Axis ◽  
Aerodynamic Characteristics ◽  
Simulation Software ◽  
Power Coefficient ◽  
Vertical Axis Wind Turbine

The use of wind energy has no harmful effects on the environment. This makes it a clean energy that is a real alternative to the problem of nuclear waste management and greenhouse gas emissions. Vertical axis wind turbines have prospective advantages in the field of domestic applications, because they have proven effectual in urban areas where wind flow conditions are intermittent, omnidirectional, unsteady and turbulent. The wind cannot ensure a regular energy supply without optimising the aerodynamics of the blades. This article presents a reminder about wind energy and wind turbines, especially the VAWT type wind turbines and also gives a presentation on the aerodynamic side of VAWT by studying the geometry and aerodynamic characteristics of the blade profiles with the acting forces and also the explanation of the DMS multiple flow tube model. This work also gives the different simulation methods to optimize the behaviour of the blades from the selected NACA profiles; the analysis first goes through the design of the blades by the design and simulation software Qblade which is used to calculate also the forces on the blade and the coefficients of lift, drag and fineness. At the end of this article we have the DMS simulation of the VAWT turbines, by determining the power coefficient and the power collected by the turbine to select the wind turbine adapted to a well characterized site.

Sign in / Sign up

Export Citation Format

Share Document