scholarly journals Optimisation of C:N Ratio for Co-Digested Processed Industrial Food Waste and Sewage Sludge Using the BMP Test

2011 ◽  
Vol 9 (1) ◽  
Author(s):  
Zuhaib Siddiqui ◽  
N.J. Horan ◽  
Kofi Anaman
Keyword(s):  
Sewage Sludge ◽  
Food Waste ◽  
Biogas Production ◽  
C:N Ratio ◽  
Methane Yield ◽  
Biochemical Methane Potential ◽  
Volatile Solids ◽  
Methane Potential ◽  
Biomethane Production ◽  
Bmp Test

Biomethane production from processed industrial food waste (IFW) in admixture with sewage sludge (primary and waste activated sludge: PS and WAS) was evaluated at a range of C:N ratios using a standard biochemical methane potential (BMP) test. IFW alone had a C:N of 30 whereas for WAS it was 5.4 and thus the C:N ratio of the blends fell in that range. Increasing the IFW content in mix improves the methane potential by increasing both the cumulative biogas production and the rate of methane production. Optimum methane yield 239 mL/g VSremoved occurred at a C:N ratio of 15 which was achieved with a blend containing 11 percent (w/w) IFW. As the fraction of IFW in the blend increased, volatile solids (VS) destruction was increased and this led to a reduction in methane yield and amount of production. The highest destruction of volatile solids of 93 percent was achieved at C:N of 20 followed by C:N 30 and 15. A shortened BMP test is adequate for evaluating optimum admixtures.

scholarly journals Biochemical Methane Potential of Cork Boiling Wastewater at Different Inoculum to Substrate Ratios

2021 ◽  
Vol 11 (7) ◽  
pp. 3064
Author(s):  
Roberta Mota-Panizio ◽  
Manuel Jesús Hermoso-Orzáez ◽  
Luis Carmo-Calado ◽  
Gonçalo Lourinho ◽  
Paulo Sérgio Duque de Brito
Keyword(s):  
Anaerobic Digestion ◽  
Biogas Production ◽  
Treatment Plant ◽  
Organic Substrates ◽  
Biochemical Methane Potential ◽  
Volatile Solids ◽  
Working Volume ◽  
Methane Potential ◽  
Bmp Test ◽  
Cork Industry

The present study evaluates the digestion of cork boiling wastewater (CBW) through a biochemical methane potential (BMP) test. BMP assays were carried out with a working volume of 600 mL at a constant mesophilic temperature (35 °C). The experiment bottles contained CBW and inoculum (digested sludge from a wastewater treatment plant (WWTP)), with a ratio of inoculum/substrate (Ino/CBW) of 1:1 and 2:1 on the basis of volatile solids (VSs); the codigestion with food waste (FW) had a ratio of 2/0.7:0.3 (Ino/CBW:FW) and the codigestion with cow manure (CM) had a ratio of 2/0.5:0.5 (Ino/CBW:CM). Biogas and methane production was proportional to the inoculum substrate ratio (ISR) used. BMP tests have proved to be valuable for inferring the adequacy of anaerobic digestion to treat wastewater from the cork industry. The results indicate that the biomethane potential of CBWs for Ino/CBW ratios 1:1 and 2:1 is very low compared to other organic substrates. For the codigestion tests, the test with the Ino/CBW:CM ratio of 2/0.7:0.3 showed better biomethane yields, being in the expected values. This demonstrated that it is possible to perform the anaerobic digestion (AD) of CBW using a cosubstrate to increase biogas production and biomethane and to improve the quality of the final digestate.

scholarly journals Biogas Production from Physicochemically Pretreated Grass Lawn Waste: Comparison of Different Process Schemes

Molecules ◽  
2020 ◽  
Vol 25 (2) ◽  
pp. 296 ◽  
Author(s):  
Georgia Antonopoulou ◽  
Dimitrios Vayenas ◽  
Gerasimos Lyberatos
Keyword(s):  
Biogas Production ◽  
Economic Assessment ◽  
Methane Yield ◽  
Biochemical Methane Potential ◽  
Naoh Pretreatment ◽  
Volatile Solids ◽  
Methane Potential ◽  
Whole Slurry ◽  
Almost All ◽  
Pretreated Biomass

Various pretreatment methods, such as thermal, alkaline and acid, were applied on grass lawn (GL) waste and the effect of each pretreatment method on the Biochemical Methane Potential was evaluated for two options, namely using the whole slurry resulting from pretreatment or the separate solid and liquid fractions obtained. In addition, the effect of each pretreatment on carbohydrate solubilization and lignocellulossic content fractionation (to cellulose, hemicellulose, lignin) was also evaluated. The experimental results showed that the methane yield was enhanced with alkaline pretreatment and, the higher the NaOH concentration (20 g/100 gTotal Solids (TS)), the higher was the methane yield observed (427.07 L CH4/kg Volatile Solids (VS), which was almost 25.7% higher than the BMP of the untreated GL). Comparing the BMP obtained under the two options, i.e., that of the whole pretreatment slurry with the sum of the BMPs of both fractions, it was found that direct anaerobic digestion without separation of the pretreated biomass was favored, in almost all cases. A preliminary energy balance and economic assessment indicated that the process could be sustainable, leading to a positive net heat energy only when using a more concentrated pretreated slurry (i.e., 20% organic loading), or when applying NaOH pretreatment at a lower chemical loading.

scholarly journals Potential of biogas production from anaerobic co-digestion of fat, oil and grease waste and food waste

2018 ◽  
Vol 67 ◽  
pp. 02047 ◽  
Author(s):  
Reigina Sandriaty ◽  
Cindy Priadi ◽  
Septiana Kurnianingsih ◽  
Ayik Abdillah
Keyword(s):  
Anaerobic Digestion ◽  
Food Waste ◽  
Biogas Production ◽  
Potential Method ◽  
Methane Yield ◽  
Volatile Solid ◽  
Oil And Grease ◽  
Biochemical Methane Potential ◽  
Digestion Process ◽  
Methane Potential

The generation of fat, oil and grease (FOG) waste can be a nuisance hazard, but also a potential for resource recovery. FOG waste can be utilized as nutrient and energy source through anaerobic digestion which may increase methane yield but also increase presence of inhibitors. Using the biochemical methane potential method, this research is aimed to determine the effect of FOG waste in the co-digestion process of food waste (FW) to produce biogas. The research was conducted for 42 days at 37°C using FOG waste codigested with FW of 3 different volatile solid (VS) rasio which are 0.125, 0.3, and 0.5. The results showed that FOG waste combined with FW has a methane yield that may reach up to 485 ± 36.8 mL CH4/gr VS, the highest one produced by the 0.125 VS rasio mix. While the ratio of FOG waste with FW at 0.3 and 0.5 only produce 128 ± 195 and 4 ± 1.45 mL CH4/gr VS, respectively. The ratio of 0.125 also demonstrates the highest COD reduction of 56% compared to the other ratio which indicates the 0.125 FOG and FW ratio can be implemented to utilize FOG waste and increase methane yield during anaerobic digestion process.

scholarly journals The Performance Evaluation on Co-Digestion of Domestic Sewage Sludge and Food Waste for Methane Yield and Kinetics Analysis

2021 ◽  
Vol 13 (3) ◽  
Author(s):  
Siti Mariam Sulaiman ◽  
◽  
Roslinda Seswoya ◽  
Keyword(s):  
Anaerobic Digestion ◽  
Sewage Sludge ◽  
Food Waste ◽  
Methane Production ◽  
Test System ◽  
Domestic Sewage ◽  
Methane Yield ◽  
Methane Potential ◽  
Methane Production Rate ◽  
Bmp Test

Sewage sludge and food waste; are organic wastes suitable for the anaerobic digestion. However, the digestion of sewage sludge and food waste as solely substrate is having a drawback in term of methane yield. Therefore, many researchers combined these two wastes as a co-substrate and used in co-digestion. This study focused to evaluate the anaerobic co-digestion of domestic sewage sludge (in form of primary and secondary sewage sludge) with food waste under mesophilic temperature in a batch assay. Two series of batch biochemical methane potential (BMP) test were conducted using the Automatic Methane Potential Test System (AMPTS II). Each set are labelled with BMP 1(PSS:FW) and BMP 2 (SSS:FW). The BMP tests were monitored automatically until the methane production is insignificant. Using the data observed in the laboratory, the kinetic paremeters were calculated. Also, the First-order and Modified Gompertz modeling were included to predict the anaerobic digestion performance. Finding showed that BMP 1(PSS:FW) have better performance with respect to the higher ultimate methane yield and methane production rate as compared to BMP 2 (SSS:FW). Besides, the kinetic parameters from laboratory work and modeling were slightly different. In which the kinetic paremetes from modelling is lesser. However, both modelling are well fitted to the experimental data with high correlation coefficient, R2 ranged from 0.993 to 0.997.

Determination of methane yield of cellulose using different experimental setups

2014 ◽  
Vol 70 (4) ◽  
pp. 599-604 ◽  
Author(s):  
Bing Wang ◽  
Ivo Achu Nges ◽  
Mihaela Nistor ◽  
Jing Liu
Keyword(s):  
Water Column ◽  
Test System ◽  
Methane Yield ◽  
Biochemical Methane Potential ◽  
Methane Potential ◽  
Bmp Test ◽  
Potential Test

In this work, biochemical methane potential (BMP) tests with cellulose as a model substrate were performed with the aid of three manually operated or conventional experimental setups (based on manometer, water column and gas bag) and one automated apparatus specially designed for analysis of BMP. The methane yields were 340 ± 18, 354 ± 13, 345 ± 15 and 366 ± 5 ml CH4/g VS obtained from experimental setups with manometer, water column, gas bag, and automatic methane potential test system, which corresponded to a biodegradability of 82, 85, 83 and 88% respectively. The results demonstrated that the methane yields of cellulose obtained from conventional and automatic experimental setups were comparable; however, the methane yield obtained from the automated apparatus showed greater precision. Moreover, conventional setups for the BMP test were more time- and labour-intensive compared with the automated apparatus.

Anaerobic digestion of sunflower oil cake: a current overview

2013 ◽  
Vol 67 (2) ◽  
pp. 410-417 ◽  
Author(s):  
M. A. De la Rubia ◽  
V. Fernández-Cegrí ◽  
F. Raposo ◽  
R. Borja
Keyword(s):  
Anaerobic Digestion ◽  
Sunflower Oil ◽  
Physical Structure ◽  
Methane Yield ◽  
Organic Loading Rate ◽  
Biochemical Methane Potential ◽  
In Series ◽  
Methane Potential ◽  
Bmp Test ◽  
Sunflower Oil Cake

Due to the chemical and physical structure of a lignocellulosic biomass, its anaerobic digestion (AD) is a slow and difficult process. In this paper, the results obtained from a batch biochemical methane potential (BMP) test and fed-batch mesophilic AD assays of sunflower oil cake (SuOC) are presented. Taking into account the low digestibility shown during one-stage experiments the methane yield decreased considerably after increasing the organic loading rate (OLR) from 2 to 3 g VS L−1 d−1, SuOC was subjected to a two-stage AD process (hydrolytic-acidogenic and methanogenic stages), in two separate reactors operating in series where the methanogenic stage became acidified (with >1,600 mg acetic acid L−1) at an OLR as low as 2 g VS L−1 d−1. More recently, BMP assays were carried out after mechanical, thermal, and ultrasonic pre-treatments to determine the best option on the basis of the methane yield obtained.

scholarly journals Biochemical Methane Potential of Agro Wastes

2013 ◽  
Vol 2013 ◽  
pp. 1-7 ◽  
Author(s):  
Vidhya Prabhudessai ◽  
Anasuya Ganguly ◽  
Srikanth Mutnuri
Keyword(s):  
Biogas Production ◽  
Coconut Oil ◽  
Methane Yield ◽  
Batch Mode ◽  
Solids Concentration ◽  
Anaerobic Biodegradability ◽  
Volatile Solids ◽  
Cashew Apple ◽  
Methane Potential ◽  
Coconut Oil Cake

The focus of our work is on anaerobic digestion of locally available agro wastes like coconut oil cake, cashew apple waste, and grass from lawn cuttings. The most productive agro waste, in terms of methane yield, was coconut oil cake and grass. The results showed that the initial volatile solids concentration significantly affected the biogas production. The methane yield from coconut oil cake was found to be 383 ml CH4/g VS and 277 ml CH4/g VS added at 4 and 4.5 g VS/l. In case of grass the biogas production increased with increasing VS concentrations with methane yield of 199, 250, 256, 284, and 332 ml CH4/g VS at 3, 3.5, 4, 4.5, and 5.0 g VS/l. For cashew apple waste single-stage fermentation inhibited biogas production. However, phase separation showed methane yield of 60.7 ml CH4/g VS and 64.6 ml CH4/g VS at 3.5 and 4.0 g VS/l, respectively. The anaerobic biodegradability of coconut oil cake was evaluated in fed batch mode in a 5 L anaerobic reactor at 4 g VS/L per batch, and the maximum methane yield was found to be 320 ml CH4/g VS.

scholarly journals Effect of Paper vs. Bioplastic Bags on Food Waste Collection and Processing

2021 ◽  
Author(s):  
Giovanni Dolci ◽  
Arianna Catenacci ◽  
Francesca Malpei ◽  
Mario Grosso
Keyword(s):  
Waste Management ◽  
Food Waste ◽  
Waste Collection ◽  
Biochemical Methane Potential ◽  
Recycled Paper ◽  
Weight Losses ◽  
Breathable Fabric ◽  
Methane Potential ◽  
New Type ◽  
Biomethane Production

Abstract Purpose The most abundant among the separately collected waste materials in Italy is food waste. This research aims to evaluate the influence of the type of collection bag on the food waste management chain. In Italy, the food waste collection is mainly based on bioplastic bags. As an alternative, a new type of recycled paper bag shows potential advantages. Methods The two types of collection bag were compared evaluating the weight loss of food waste during the household storage, by means of an experimental assessment simulating the domestic dynamic bag filling. Moreover, the biomethane production of bags under anaerobic conditions was measured at the lab-scale level with Biochemical Methane Potential (BMP) tests. Results During the household storage, the breathable fabric of the paper allows for higher weight losses, ranging on average between + 29 and + 44% compared to bioplastic. BMP tests, carried out under different conditions (temperature, inoculum), showed a 2–14 times higher generation of methane by paper bags compared to bioplastic bags, when referred to 1 kg of inserted food waste. Conclusions Collecting the food waste inside paper bags shows advantages compared to the use of bioplastic bags. First, the waste collection is benefitted thanks to the lower weight of material to be transported to treatment plants, leading also to the possibility of decreasing the collection frequency. Moreover, paper resulted more compatible than bioplastic with the anaerobic digestion treatment, which is currently rapidly increasing as a food waste management option. Graphic Abstract

scholarly journals Characteristics of Biogas Production from Organic Wastes Mixed at Optimal Ratios in an Anaerobic Co-Digestion Reactor

Energies ◽  
2021 ◽  
Vol 14 (20) ◽  
pp. 6812
Author(s):  
Young-Ju Song ◽  
Kyung-Su Oh ◽  
Beom Lee ◽  
Dae-Won Pak ◽  
Ji-Hwan Cha ◽  
...  
Keyword(s):  
Sewage Sludge ◽  
Food Waste ◽  
Methane Yield ◽  
Continuous Reactor ◽  
Mixing Ratio ◽  
Reactor Operation ◽  
Livestock Manure ◽  
Design Expert ◽  
Bmp Test ◽  
Optimal Mixing

This study determined the optimal mixing ratio of food waste and livestock manure for efficient co-digestion of sewage sludge by applying the biochemical methane potential (BMP) test, Design Expert software, and continuous reactor operation. The BMP test of sewage sludge revealed a maximum methane yield of 334 mL CH4/g volatile solids (VS) at an organic loading rate (OLR) of 4 kg VS/(m3·d). For food waste, the maximum methane yield was 573 mL CH4/g VS at an OLR of 6 kg VS/(m3·d). Livestock manure showed the lowest methane yield. The BMP tests with various mixing ratios confirmed that a higher mixing ratio of food waste resulted in a higher methane yield, which showed improved biodegradability and an improved VS removal rate. The optimal mixing ratio of 2:1:1 for sewage sludge, food waste, and livestock manure was determined using Design Expert 10. Using continuous co-digestion reactor operation under an optimal mixing ratio, greater organic matter removal and methane yield was possible. The process stability of co-digestion of optimally mixed substrate was improved compared with that of operations with each substrate alone. Therefore, co-digestion could properly maintain the balance of each stage of anaerobic digestion reactions by complementing the characteristics of each substrate under a higher OLR.

scholarly journals Chemical pre-treatments on oil palm empty fruit bunches: Impacts on characteristics and methane potential

2021 ◽  
Vol 924 (1) ◽  
pp. 012071
Author(s):  
N A Rohma ◽  
S Suhartini ◽  
I Nurika
Keyword(s):  
Lignocellulosic Biomass ◽  
Oil Palm ◽  
Biogas Production ◽  
Lignin Content ◽  
Test System ◽  
Biochemical Methane Potential ◽  
Empty Fruit Bunches ◽  
Methane Potential ◽  
Pre Treatment ◽  
Bmp Test

Abstract Production of biogas from lignocellulosic biomass by anaerobic digestion (AD) has attracted much interest. Oil palm empty fruit bunches (OPEFB), one of lignocellulosic biomass, is highly abundant in Indonesia and has potential as feedstock for bioenergy production such as biogas or methane. Yet, pre-treatments are needed to improve biogas production due to its complex crystalline structures. Chemical pre-treatments with acid or alkaline solution were reported to increase cellulose or highly reduce the lignin content of OPEFB. This study aimed to evaluate the effect of acid and alkaline pre-treatments on the characteristics of OPEFB and methane potential. The acid pre-treatment experimental design was used factor of H2SO4 concentration (1, 1.3, and 1.6 (%v/v)) and NaOH concentration (1.8, 2.8, and 3.8 (%w/v)). Methane potential evaluation was carried out using the biochemical methane potential (BMP) test with the Automatic Methane Potential Test System (AMPTS) II under mesophilic condition (37°C), operated for 28 days. The results showed that both dilute acid and alkaline pre-treatment positively impact altering the characteristics of OPEFB, hence the specific methane potential. Alkaline pre-treatment with NaOH 3.8 (%w/v) gave the highest average SMP value of 0.161 ± 0.005 m3 CH4/kgVSadded.

Sign in / Sign up

Export Citation Format

Share Document