scholarly journals Assessment of the usefulness of selected media used in the rooting process of lavender cotton shoot cuttings

2016 ◽  
Vol 28 (2) ◽  
pp. 195-200
Author(s):  
Stanisława Szczepaniak ◽  
Zdzisław Guzikowski ◽  
Monika Henschke
Keyword(s):  
Root System ◽  
Mineral Soil ◽  
High Quality ◽  
Rooted Cuttings ◽  
Mother Plants ◽  
Medium Type

Abstract Lavender cotton (Santolina chamaecyparissus L.) shoot cuttings, obtained from two-year-old mother plants, were rooted in five different media under an unheated foil tunnel. Two ready-made and widely recommended media were used: Hartmann peat substrate and Ceres peat-coconut substrate, as well as three prepared mixtures: high peat + mineral soil, high peat + perlite and high peat + sand. The influence of medium type on the number of rooted cuttings and the quality of the root system was assessed for two cultivation times during a three-year study after eight weeks from the date of cutting. As far as the ready-made rooting substrates are concerned, Ceres peat-coconut substrate turned out to be better when compared with the Hartmann substrate. The number of high quality rooted cuttings was larger when media containing high peat mixed with either mineral soil or sand were used in comparison with the mixture of high peat and perlite.

scholarly journals Biotechnological basis for application of growth regulators for rooting of green cuttings of trees and shrubs in a greenhouse with a misting system

2020 ◽  
Vol 23 ◽  
pp. 01009
Author(s):  
Roman A. Shchukin ◽  
Oleg E. Bogdanov ◽  
Ilya P. Zavoloka ◽  
Gennady S. Ryazanov ◽  
Nikolay M. Kruglov
Keyword(s):  
Root System ◽  
Plant Species ◽  
Growth Regulators ◽  
Root Formation ◽  
High Quality ◽  
Rooted Cuttings ◽  
Common Lilac ◽  
Ornamental Trees ◽  
Trees And Shrubs

This article presents data on the rooting of green cuttings of the studied species of ornamental trees and shrubs in a greenhouse with a misting system. We accounted the number of days from planting to the root formation and the number of rooted cuttings for each replication during our performance. We studied the influence of root formation stimulants on the rooting rate of various types of ornamental deciduous, flowering and coniferous plants. The effect of application of root formation stimulants is confirmed by the formation of a high-quality root system that is superior in length to those that were vegetated without “Kornevin”. However, the use of root formation stimulants is not advisable on shrubby cinquefoil, common privet and common lilac “Mademoiselle Casimir Perier”, because there is practically no increase in the rooting rate of cuttings in these plant species, compared to the control plants.

scholarly journals SPATIAL DISTRIBUTION OF PHYSIOLOGICAL QUALITY OF Joannesia princeps Vell. SEEDS1

2018 ◽  
Vol 41 (4) ◽  
Author(s):  
Rômulo André Beltrame ◽  
José Carlos Lopes ◽  
Julião Soares de Souza Lima ◽  
Vagner Mauri Quinto
Keyword(s):  
Spatial Distribution ◽  
Root System ◽  
Spatial Dependence ◽  
Aerial Part ◽  
Dry Mass ◽  
Fresh Mass ◽  
Plastic Bags ◽  
Mother Plants ◽  
Physiological Quality

ABSTRACT The objective of this study was to analyze the spatial distribution of the attributes that determine the physiological quality of Joannesia princeps seeds. Seeds were collected, individually from, 40 mother plants in the Horto Florestal Municipal Laerth Paiva Gama, in Alegre-ES, which constituted the georeferenced sampling mesh. For germination, the seeds tegument was cracked and was held the imbibition in gibberellic acid GA3 500 mg L-1 for 24 h in environmental chamber with temperature adjusted to 30 ºC. The seeds were sown in plastic bags of ± 600 cm3 containing soil+sand+manure in the proportion of 1:1:1. On the 65th day after sowing, the following variables were analised: emergence (E), emergence speed index (IVE), root length (CR), diameter of base (DC), shoot length of the aerial part (CPA), fresh mass of the root system (MFSR), fresh mass of the aerial part (MFPA), dry mass of the root system (MSSR) and dry mass of the aerial part (MSPA). Data were subjected to descriptive statistics, geostatistics and kriging. With the exception of CPA and MFSR, it was found spatial dependence for the other studied variables: E, IVE, CR, DC, MFPA, MSSR e MSPA; varying of 14,0 a 47,5 m, so that the lowest range for the CR and longer range and degree of spatial dependence for the IVE. The analysis of the spatial distribution of the physiological quality of seeds of J. princeps can be used as a tool to define the sampling region of seeds with high and low vigor.

scholarly journals Synergistic effect of benzolinone with IBA and fungicides on the vegetative propagation of ornamental plants, park, and fruit woody species

2012 ◽  
Vol 29 (No. 2) ◽  
pp. 41-50 ◽  
Author(s):  
M. Henselová
Keyword(s):  
Root System ◽  
Root Formation ◽  
Ornamental Plants ◽  
Woody Species ◽  
Fruit Trees ◽  
Indole Butyric Acid ◽  
Rooted Cuttings ◽  
Actinidia Arguta ◽  
Allochthonous Species

  A study was made of the stimulating effect of benzolinone (3-benzyloxycarbonyl-methyl)-2-benzothiazolinone in powder form (P) and its mixture with indole butyric acid (IBA), the biofungicide Supresivit and fungicide Captan 50 WP on the root formation of 17 species of ornamental plants, park and fruit woody species. Under the action of benzolinone, the yield of rooted cuttings in the category of ornamental plants amounted to 44.5% (in the Dianthus sp.) up to 83.7% (in Rosa canina), in the category of park woody species it was from l6.7 (in Magnolia stellata) to 100% (in Forsythia intermedia). In fruit trees represented by two species, viz. Actinidia arguta and cherry rootstocks, the yield was between 20 and 86.7%, and in two allochthonous species Cotoneaster horizontalis and Philadelphus coronarius it was from 96.7 to 100% in rooted cuttings. In the case of herbaceous and semi-lignified cuttings, lower concentrations of benzolinone below 0.1% were more effective, while on the contrary, higher concentrations of 0.1–0.2% proved more effective with lignified cuttings. In the species with difficult root formation, such as Magnolia stellata, Viburnum farreri and Actinidia arguta, benzolinone demonstrably stimulated both the rhizogenesis, and thereby the overall yield of rooted cuttings, and the quality of the root system. In the case of the species with naturally high rooting ability, the positive effect of benzolinone was manifest mainly in the quality of the root system. The synergistic action of the above stimulants on root formation was achieved in two and three-component benzolinone mixtures with IBA and fungicides on the basis of the active ingredients captan and Trichoderma harzianum. The most evident stimulating effects on the rooting of cuttings in Dianthus sp., Ficus schlechteri and the deciduous species Acer saccharinum Pyramidale, Prunus padus Colorata and Prunus kurilensis Brilliant was obtained in three-component mixtures.

scholarly journals Influence of IAA and IBA on root development and quality of Prunus 'GiSelA 5' leafy cuttings

HortScience ◽  
2005 ◽  
Vol 40 (7) ◽  
pp. 2052-2055 ◽  
Author(s):  
Mateja Štefančič ◽  
Franci Štampar ◽  
Gregor Osterc
Keyword(s):  
Root System ◽  
Root Development ◽  
Root Formation ◽  
Callus Formation ◽  
Early Period ◽  
Rooted Cuttings ◽  
Efficient Treatment ◽  
Rooted Cutting ◽  
Gisela 5

The influence of two exogenously applied auxins (IAA and IBA) on the root and shoot development of leafy cuttings was analyzed at 'GiSelA 5', the dwarfing cherry rootstock. IBA (indole-3-butyric acid) hindered the callus formation in the early period of root development and it was more successful than IAA (indole-3-acetic acid) in promoting earlier root development. IBA also influenced the stronger shoot growth and the development of acrobasal type of the rooting system, and induced higher number of roots. Those parameters are very important for the quality and survival of the new plants and they are not the consequence of the higher IAA content in the rooting zones of cuttings in the first days of root development. Both auxin treatments had no effect on the final percent of the rooted cuttings neither on the survival of cuttings, but they increased the percent of rooted cuttings without callus. The root system with callus proved less qualitative, because the cuttings with such root system developed significantly less roots per rooted cutting and their shoot length was shorter than those of the cuttings without callus at both auxin treatments. Exogenously applied auxins were not crucial for root formation, however their application resulted in higher percent of more qualitative 'GiSelA 5' leafy cuttings. IBA proved as the most efficient treatment and it additionally induced earlier root formation.

Growth and development of eastern white pine rooted cuttings compared with seedlings through 8 years of age

1990 ◽  
Vol 20 (3) ◽  
pp. 365-368 ◽  
Author(s):  
Daniel K. Struve ◽  
Steven E. McKeand
Keyword(s):  
Root System ◽  
Stem Cuttings ◽  
System Quality ◽  
White Pine ◽  
Eastern White Pine ◽  
Rooted Cuttings ◽  
The Difference ◽  
Stock Types ◽  
Bare Root

Container-grown rooted stem cuttings from 13 eastern white pine (Pinusstrobus L.) clones were paired with open-pollinated bare-root seedlings to compare growth through age 8 years of the two stock types. Before planting, measures of root system quality (number of roots per cutting, root distribution, and weighted root score) were recorded for each ramet to relate growth to initial root system quality. Rooted cuttings had higher survival than seedlings through year 8, 78 vs. 68%, respectively, but the difference was not statistically significant. Rooted cuttings were significantly shorter than seedlings after age 4 years, with differences between stock types increasing in magnitude through year 8. Measures of root system quality of rooted cuttings were not significantly correlated with survival or growth at any age.

scholarly journals Effects of Culturing Methods of Mother Plants on Yield of Cuttings and Quality of Rooted Cuttings in Summer-to-Autumn-flowering Chrysanthemum morifolium Ramat.

2010 ◽  
Vol 9 (1) ◽  
pp. 31-38
Author(s):  
Takahiro Tanigawa ◽  
Toshihiro Kunitake ◽  
Chisako Nakamura ◽  
Asuka Yamada ◽  
Takuro Suyama ◽  
...  
Keyword(s):  
Chrysanthemum Morifolium ◽  
Rooted Cuttings ◽  
Mother Plants ◽  
Autumn Flowering ◽  
Chrysanthemum Morifolium Ramat

scholarly journals Rooting of black raspberry with plant growth regulator

2018 ◽  
Vol 48 (3) ◽  
Author(s):  
Fabíola Villa ◽  
Diego Ricardo Stumm ◽  
Daniel Fernandes da Silva ◽  
Fernanda Jaqueline Menegusso ◽  
Giovana Ritter ◽  
...  
Keyword(s):  
Plant Growth ◽  
Plant Growth Regulator ◽  
Stem Cuttings ◽  
Black Raspberry ◽  
High Quality ◽  
Rooted Cuttings ◽  
Asexual Propagation ◽  
Dry Biomass ◽  
Rooting Of Cuttings

ABSTRACT: The framboseira-negra has a potential for cultivation in Brazil, due to the fact that this fruit produces high quantities of fruits, which confer a high quality jelly. However, their propagation is an obstacle to the establishment of commercial plantations. Production and expansion of a fruit is directly linked to the propagation method and the quality of its development. Given the above, the aim of the present study was to evaluate the use of stem cuttings and IBA in asexual propagation of black raspberry. Two experiments being conducted in greenhouse conditions were performed. Stem cuttings were taken from didactic orchard, with matrix plant of four years, which were the experiments. The first experiment was carried out in factorial 3x2, with cuttings taken from three regions of the plant branch matrix (apical, median and basal) x two treatments with IBA (without IBA and 2000mg L-1 IBA), containing four repetitions and fifteen cuttings per repetition. The second experiment consisted of a 4x2, with four sizes of cuttings (5, 10, 15 and 20cm) x two treatments with IBA (without IBA and 2000mg L-1 IBA), with four replications and fifteen cuttings by repetition. After eighty days, the percentage of rooted cuttings (%), average number of roots and shoots for cuttings, the longest root length (cm) and fresh and dry biomass of shoots (g) were assessed. Best results in the formation of root system were observed in middle and apical stem cuttings. Stem Cuttings between 10 and 20cm obtained better results for rooting. There is no need to use IBA rooting of cuttings of black raspberry.

Influence of technology parameters of free-cutting steel continuous casting on the billet internal structure

2020 ◽  
Vol 76 (2) ◽  
pp. 139-142
Author(s):  
A. T. Kunakbaeva ◽  
A. M. Stolyarov ◽  
M. V. Potapova
Keyword(s):  
Regression Analysis ◽  
Continuous Casting ◽  
Internal Structure ◽  
Sulfur Content ◽  
Manganese Content ◽  
High Quality ◽  
Correlation And Regression Analysis ◽  
Cutting Steel ◽  
Continuously Cast

Free-cutting steel gains specific working properties thanks to the high content of sulfur and phosphorus. These elements, especially sulfur, have a rather high tendency to segregation. Therefore, segregation defects in free-cutting steel continuously cast billets can be significantly developed. The aim of the work was to study the influence of the chemical composition of freecutting steel and casting technological parameters on the quality of the macrostructure of continuously cast billets. A metallographic assessment of the internal structure of cast metal made of free-cutting steel and data processing by application of correlation and regression analysis were the research methods. The array of production data of 43 heats of free-cutting steel of grade A12 was studied. Steel casting on a five-strand radial type continuous casting machine was carried out by various methods of metal pouring from tundish into the molds. Metal of 19 heats was poured with an open stream, and 24 heats – by a closed stream through submerged nozzles with a vertical hole. High-quality billets had a cross-sectional size of 150×150 mm. The macrostructure of high-quality square billets made of free-cutting steel of A12 grade is characterized by the presence of central porosity, axial segregation and peripheral point contamination, the degree of development of which was in the range from 1.5 to 2.0 points, segregation cracks and strips – about 1.0 points. In the course of casting with an open stream, almost all of these defects are more developed comparing with the casting by a closed stream. As a result of correlation and regression analysis, linear dependences of the development degree of segregation cracks and strips both axial and angular on the sulfur content in steel and on the ratio of manganese content to sulfur content were established. The degree of these defects development increases with growing of sulfur content in steel of A12 grade. These defects had especially strong development when sulfur content in steel was of more than 0.10%. To improve the quality of cast metal, it is necessary to have the ratio of the manganese content to the sulfur content in the metal more than eight.

Experience of clinical testing of personal telemedicine system ‘Obereg’ for remote monitoring of patients in intensive care units

2020 ◽  
pp. 52-58 ◽  
Author(s):  
A. A. Eryomenko ◽  
N. V. Rostunova ◽  
S. A. Budagyan ◽  
V. V. Stets
Keyword(s):  
Intensive Care ◽  
Intensive Care Units ◽  
Remote Monitoring ◽  
Clinical Testing ◽  
Transportation Of Patients ◽  
High Quality ◽  
Telemedicine System ◽  
Accuracy Of Measurements ◽  
Hospital Equipment

The experience of clinical testing of the personal telemedicine system ‘Obereg’ for remote monitoring of patients at the intensive care units of leading Russian clinics is described. The high quality of communication with the remote receiving devices of doctors, the accuracy of measurements, resistance to interference from various hospital equipment and the absence of its own impact on such equipment were confirmed. There are significant advantages compared to stationary patient monitors, in particular, for intra and out-of-hospital transportation of patients.

METHODOLOGICAL ASPECTS OF VISUALIZATION OF CORONARY ARTERIES WITH TRANSTHORACIC ECHOCARDIOGRAPHY

2018 ◽  
pp. 26-35
Author(s):  
Z. A. Agaeva ◽  
K. B. Baghdasaryan
Keyword(s):  
Blood Flow ◽  
Coronary Blood Flow ◽  
Coronary Arteries ◽  
Transthoracic Echocardiography ◽  
Second Harmonic ◽  
Anatomic Reconstruction ◽  
High Quality ◽  
Acoustic Window ◽  
Methodological Aspects

The transthoracic echocardiography made by multifrequency probes with support of the mode of the second harmonic imaging, is a competitive method for visualization of the main coronary arteries and allows to estimate coronary blood flow with high quality. Of course, the method has considerable restrictions, most important of which is the low spatial resolution of a method, due to small acoustic window. Because of this the transthoracic visualization of coronary arteries perhaps will not become the leading method of anatomic reconstruction of separately taken coronary artery and especially all coronary arteries system. However uniqueness and indisputable advantage of this method is an opportunity to noninvasively estimate a coronary blood flow both once, and in dynamics.

Sign in / Sign up

Export Citation Format

Share Document