A Novel Compact UWB Monopole Antenna with Bluetooth and Triple Notch Band

Frequenz ◽  
2013 ◽  
Vol 67 (1-2) ◽  
pp. 1-5
Author(s):  
Li Li ◽  
Zhi-Li Zhou ◽  
Jing-Song Hong
Keyword(s):  
Communication Systems ◽  
Satellite Communication ◽  
Monopole Antenna ◽  
Ultra Wideband ◽  
Rectangular Slot ◽  
Feed Line ◽  
Notch Band ◽  
Directional Radiation ◽  
Compact Size ◽  
Current Area

AbstractA novel technique to add an extra Bluetooth band and triple notch bands simultaneously to a compact ultra-wideband (UWB) monopole antenna is presented. This scissors-shaped UWB antenna, covering 2.9 GHz–12.5 GHz, is fed by a special microstrip line. To create an extra Bluetooth band centered at 2.45 GHz, an arc-shaped stub is attached to the high concentrated current area right of the feed line and a rectangular slot is etched in the radiation patch. Besides, a notch band for WLAN (5.6 GHz–6.15 GHz) is also obtained. In addition, by connecting two asymmetric stubs to the feed line, two other notch bands in 3.28 GHz–3.8 GHz for WiMAX and 7.1 GHz–7.76 GHz for downlink of X-band satellite communication systems are achieved. The proposed antenna with compact size of 20 mm × 26 mm is fabricated and measured, showing stable antenna gain and good omni-directional radiation patterns in H-plane.

A compact CPW-fed monopole antenna for multi-band application

2021 ◽  
pp. 1-7
Author(s):  
YunYan Zhou ◽  
NianShun Zhao ◽  
RenXia Ning ◽  
Jie Bao
Keyword(s):  
Mobile Communications ◽  
Radio Frequency Identification ◽  
Communication Systems ◽  
Satellite Communication ◽  
Coplanar Waveguide ◽  
Dielectric Substrate ◽  
Monopole Antenna ◽  
Radiation Characteristics ◽  
Frequency Bands ◽  
Compact Size

Abstract A compact coplanar waveguide-fed monopole antenna is presented in this paper. The proposed antenna is composed of three monopole branches. In order to achieve the miniaturization, the longest branch was bent. The antenna is printed on an FR4 dielectric substrate, having a compact size of 0.144λ0 × 0.105λ0 × 0.003λ0 at its lowest resonant frequency of 900 MHz. The multiband antenna covers five frequency bands: 820–990 MHz, 1.87–2.08 GHz, 2.37–2.93 GHz, 3.98–4.27 GHz, and 5.47–8.9 GHz, which covers the entire radio frequency identification bands (860–960 MHz, 2.4–2.48 GHz, and 5.725–5.875 GHz), Global System for Mobile Communications (GSM) bands (890–960 MHz and 1.850–1.990 GHz), WLAN bands (2.4–2.484 GHz and 5.725–5.825 GHz), WiMAX band (2.5–2.69 GHz), X-band satellite communication systems (7.25–7.75 GHz and 7.9–8.4 GHz), and sub 6 GHz in 5G mobile communication system (3.3–4.2 GHz and 4.4–5.0 GHz). Also, the antenna has good radiation characteristics in the operating band, which is nearly omnidirectional. Both the simulated and experimental results are presented and compared and a good agreement is established. The proposed antenna operates in five frequency bands with high gain and good radiation characteristics, which make it a suitable candidate in terminal devices with multiple communication standards.

Compact UWB monopole antenna with reconfigurable band-notch characteristics

2019 ◽  
Vol 12 (3) ◽  
pp. 252-258 ◽  
Author(s):  
Liping Han ◽  
Jing Chen ◽  
Wenmei Zhang
Keyword(s):  
Ground Plane ◽  
Monopole Antenna ◽  
Ultra Wideband ◽  
Dual Band ◽  
Radiation Patterns ◽  
Pin Diodes ◽  
Notch Band ◽  
Rectangular Patch ◽  
Compact Size ◽  
Defected Ground Plane

AbstractA compact ultra-wideband (UWB) monopole antenna with reconfigurable band-notch characteristics is demonstrated in this paper. It is comprised of a modified rectangular patch and a defected ground plane. The band-notch property in the WiMAX and WLAN bands is achieved by etching an open-ended slot on the radiating patch and an inverted U-shaped slot on the ground plane, respectively. To obtain the reconfigurable band-notch performance, two PIN diodes are inserted in the slots, and then the notch-band can be switched by changing the states of the PIN diodes. The antenna has a compact size of 0.47 λ1 × 0.27 λ1. The simulated and measured results indicate that the antenna can operate at a UWB mode, two single band-notch modes, and a dual band-notch mode. Moreover, stable radiation patterns are obtained.

scholarly journals Compact Size Triple Notched-bands UWB Antenna with Sharp Band-Rejection Characteristics at WiMAX and WLAN Bands

2018 ◽  
Vol 7 (3) ◽  
pp. 99-103 ◽  
Author(s):  
M. F. Habash ◽  
A. S. Tantawy ◽  
H. A. Atallah ◽  
A. B. Abdel-Rahman
Keyword(s):  
Monopole Antenna ◽  
Ultra Wideband ◽  
Good Frequency ◽  
Uwb Antenna ◽  
Feed Line ◽  
The Third ◽  
Compact Size ◽  
Sharp Band ◽  
Planar Monopole Antenna ◽  
Triple Band

In this paper, a compact triple band-notched Ultra Wideband (UWB) antenna with sharp band-elimination features and controlled notched bandwidths is proposed and discussed. The design is made up of a rectangular-shaped   patch UWB planar monopole antenna with double collections of band-notched configurations. The band-notched configurations are involved to produce the desired lower and upper stop bands with good frequency selectivity and suitable stop bandwidths. The first notch is realized by using a C-shaped slot etched in the radiating patch in order to eliminate the interference at the WiMAX (3.4 - 3.8 GHz) applications. The second and the third notches are realized together by using a pair of U-shaped resonators that are located beside the feed line in both sides to eliminate the interference with the lower WLAN (5.15–5.35 GHz) and the higher WLAN (5.725–5.825GHz) bands.  Additionally, the bandwidths of the lower and upper stop bands can be control separately by changing the parameters of the band-notched configurations. Furthermore, the suggested triple notched bands UWB antenna is optimized, fabricated, and measured for verification purposes. The measured results are close to the simulated ones.

A dual band-notched ultra-wideband monopole antenna with spiral-slots and folded SIR-DGS as notch band structures

2015 ◽  
Vol 8 (8) ◽  
pp. 1197-1206 ◽  
Author(s):  
Seyed Saeed Mirmosaei ◽  
Seyed Ebrahim Afjei ◽  
Esfandiar Mehrshahi ◽  
Mohammad M. Fakharian
Keyword(s):  
Communication Systems ◽  
Ground Plane ◽  
Surface Current ◽  
Monopole Antenna ◽  
Ultra Wideband ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Defected Ground Structure ◽  
Notch Band ◽  
Notched Band

In this paper, an ultra-wideband (UWB) planar monopole antenna with impedance bandwidth from 2.83 to 11.56 GHz and dual band-notched characteristics is presented. The antenna consists of a small rectangular ground plane, a bat-shaped radiating patch, anda 50-Ω microstrip line. The notched bands are realized by introducing two different types of structures. The half-wavelength spiral-slots are etched on the radiating patch to obtain a notched band in 5.15 5.925 GHz for WLAN, HIPERLAN, and DSRC systems. Based on the single band-notched UWB antenna, the second notched band is realized by etching a folded stepped impedance resonator as defected ground structure on the ground plane for WiMAX and C-band communication systems. The notched frequencies can be adjusted by altering the length of resonant cells. Surface current distributions and equivalent circuit are used to illustrate the notched mechanism. The performance of this antenna both by simulation and by experiment indicates that the proposed antenna is suitable and a good candidate for UWB applications.

scholarly journals A Novel UWB Antenna with Reconfigurable Notch Bands

2019 ◽  
Vol 8 (9S) ◽  
pp. 73-79
Keyword(s):  
Communication Systems ◽  
Satellite Communication ◽  
Dual Band ◽  
Uwb Antenna ◽  
Rf Switches ◽  
Feed Line ◽  
Notch Band ◽  
X Band ◽  
Microstrip Feed Line ◽  
Microstrip Feed

A UWB antenna with reconfigurable notch band characteristics is proposed in this paper. The tunable notches are created using modified E shaped resonators that can be reconfigured to modified C shape; etched on either side of the microstrip feed line of a circular patch UWB antenna. The single and dual band rejection characteristics are created by using C and E shaped structure respectively. Reconfigurability is achieved by using two RF switches. By varying the ON and OFF states of the RF switches, two different notch bands are created; single notch band from 4 to 6.2 GHz and an additional notch band from 7.6 to 10 GHz are achieved. These wide bandwidth rejection performance leads to notching of WLAN, WiMAX, C-band frequencies and X band Satellite communication systems.

scholarly journals A Rectangular Notch-Band UWB Antenna with Controllable Notched Bandwidth and Centre Frequency

Sensors ◽  
2020 ◽  
Vol 20 (3) ◽  
pp. 777 ◽  
Author(s):  
Anees Abbas ◽  
Niamat Hussain ◽  
Min-Joo Jeong ◽  
Jiwoong Park ◽  
Kook Sun Shin ◽  
...  
Keyword(s):  
Satellite Communication ◽  
Ultra Wideband ◽  
Center Frequency ◽  
Area Network ◽  
Electromagnetic Bandgap ◽  
Uwb Antenna ◽  
Compact Antenna ◽  
Notch Band ◽  
The Individual ◽  
Rectangular Notch

This paper presents the design and realization of a compact ultra-wideband (UWB) antenna with a rectangular notch wireless area network (WLAN) band that has controllable notched bandwidth and center frequency. The UWB characteristics of the antenna are achieved by truncating the lower ends of the rectangular microstrip patch, and the notch characteristics are obtained by using electromagnetic bandgap (EBG) structures. EBGs consist of two rectangular metallic conductors loaded on the back of the radiator, which is connected to the patch by shorting pins. A rectangular notch at the WLAN band with high selectivity is realized by tuning the individual resonant frequencies of the EBGs and merging them. Furthermore, the results show that the bandwidth and frequency of the rectangular notch band could be controlled according to the on-demand rejection band applications. In the demonstration, the rectangular notch band was shifted to X-band satellite communication by tuning the EBG parameters. The simulated and measured results show that the proposed antenna has an operational bandwidth from 3.1–12.5 GHz for |S11| < -10 with a rectangular notch band from 5–6 GHz, thus rejecting WLAN band signals. The antenna also has additional advantages: the overall size of the compact antenna is 16 × 25 × 1.52 mm3 and it has stable gain and radiation patterns.

scholarly journals A Compact Size and Low Profile Rectangular Slot Monopole Antenna for UWB Body Centric Applications

2019 ◽  
Author(s):  
Isah Musa Danjuma ◽  
Mobayode O. Akinsolu ◽  
Buhari Mohammad ◽  
Eya Eya ◽  
Raed AbdnAlhameed ◽  
...  
Keyword(s):  
Monopole Antenna ◽  
Rectangular Slot ◽  
Low Profile ◽  
Compact Size

Novel wideband slot antenna having notch-band function for 2.4 GHz WLAN and UWB applications

2011 ◽  
Vol 3 (4) ◽  
pp. 451-458 ◽  
Author(s):  
Arumugam Chellamuthu Shagar ◽  
Shaik Davood Wahidabanu
Keyword(s):  
Frequency Band ◽  
Wireless Local Area Network ◽  
Local Area Network ◽  
Ground Plane ◽  
Ultra Wideband ◽  
Slot Antenna ◽  
Area Network ◽  
Rectangular Slot ◽  
Notch Band ◽  
Uwb Applications

In this paper, the design, simulation, and fabrication of a novel printed rectangular slot antenna with a band-notched function suitable for 2.4 GHz wireless local area network (WLAN) and ultra-wideband (UWB) applications is presented and investigated. Two pairs of slits are introduced into the ground plane to realize band-notched function, by tuning the position, length, and width of which a suitable rejected frequency band can be obtained. To improve the impedance matching, a rectangular cut is also made in the ground plane so that the antenna can cover 2–12 GHz frequency range. According to the measured results, the proposed antenna has a large bandwidth totally satisfying the requirement of 2.4 GHz WLAN and UWB systems, while providing the required band-notch function from 5.1 to 5.9 GHz. The study of transfer function and time-domain characteristics also indicates the band-notched function of the antenna. The radiation patterns display nearly omni-directional performance and the antenna gain is stable except in the rejected frequency band (5.1–5.9 GHz). Moreover, group delays are within 1.5 ns except for the notch band. These features make it a promising candidate for UWB wireless applications. Details of this antenna are described, and the experimental results of the constructed prototype are given.

scholarly journals A Novel UWB TEM Horn Antenna with a Microstrip-Type Feed

2015 ◽  
Vol 2015 ◽  
pp. 1-6 ◽  
Author(s):  
Youcheng Wang ◽  
Guangyou Fang ◽  
Hai Su ◽  
Yicai Ji ◽  
Shengbo Ye ◽  
...  
Keyword(s):  
Communication Systems ◽  
Return Loss ◽  
Low Frequency ◽  
Horn Antenna ◽  
Ultra Wideband ◽  
Buried Objects ◽  
Type Transition ◽  
Compact Size ◽  
Feeding Structure ◽  
Tem Horn

A novel ultra-wideband (UWB) TEM horn antenna fed by a microstrip-type transition is designed. The feeding structure is directly realized by a microstrip line with the merit of compact size and UWB. To broaden the low frequency band, an arc surface is added at the end of the flare plates. Numerical simulation is applied to discuss the effect of the geometry construction which contains the microstrip-type transition and the circular arc surface at the end of radiating arm. Return loss, radiation pattern, and gain of the fabricated antennas are measured. The measured results show that the antenna yields a wide bandwidth ranging from 1 GHZ to 10.3 GHz with return loss less than −10 dB. The antenna also achieves unidirectional radiation patterns with stable antenna gain. These characteristics imply that the compact antenna may be used for detecting buried objects in the wall or UWB communication systems of band like GSM, Wi-Fi, and so forth.

Sign in / Sign up

Export Citation Format

Share Document