scholarly journals Investigation on influences of loose gas on gas-solid flows in a circulating fluidized bed (CFB) reactor using full-loop numerical simulation

2020 ◽  
Vol 0 (0) ◽  
Author(s):  
Pengju Huo ◽  
Xiaohong Li ◽  
Yang Liu ◽  
Haiying Qi
Keyword(s):  
Numerical Simulation ◽  
Flow Rate ◽  
Gas Flow ◽  
Circulating Fluidized Bed ◽  
Separation Efficiency ◽  
Circulation Rate ◽  
Solid Mass ◽  
Gas Flow Rate ◽  
Gas Leakage ◽  
Mass Circulation

AbstractThe influences of loose gas on gas-solid flows in a large-scale circulating fluidized bed (CFB) gasification reactor were investigated using full-loop numerical simulation. The two-fluid model was coupled with the QC-energy minimization in multi-scale theory (EMMS) gas-solid drag model to simulate the fluidization in the CFB reactor. Effects of the loose gas flow rate, Q, on the solid mass circulation rate and the cyclone separation efficiency were analyzed. The study found different effects depending on Q: First, the particles in the loop seal and the standpipe tended to become more densely packed with decreasing loose gas flow rate, leading to the reduction in the overall circulation rate. The minimum Q that can affect the solid mass circulation rate is about 2.5% of the fluidized gas flow rate. Second, the sealing gas capability of the particles is enhanced as the loose gas flow rate decreases, which reduces the gas leakage into the cyclones and improves their separation efficiency. The best loose gas flow rates are equal to 2.5% of the fluidized gas flow rate at the various supply positions. In addition, the cyclone separation efficiency is correlated with the gas leakage to predict the separation efficiency during industrial operation.

Experimental, Numerical, and Statistical Investigation of Two Phase Flow in a Cylindrical Perforation Tunnel

2021 ◽  
Author(s):  
Ekhwaiter Abobaker ◽  
Abadelhalim Elsanoose ◽  
Mohammad Azizur Rahman ◽  
Faisal Khan ◽  
Amer Aborig ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Steady State ◽  
Statistical Analysis ◽  
Flow Rate ◽  
Gas Flow ◽  
Two Phase Flow ◽  
Phase Flow ◽  
Gas Flow Rate ◽  
Two Phase ◽  
Flow Through

Abstract Perforation is the final stage in well completion that helps to connect reservoir formations to wellbores during hydrocarbon production. The drilling perforation technique maximizes the reservoir productivity index by minimizing damage. This can be best accomplished by attaining a better understanding of fluid flows that occur in the near-wellbore region during oil and gas operations. The present work aims to enhance oil recovery by modelling a two-phase flow through the near-wellbore region, thereby expanding industry knowledge about well performance. An experimental procedure was conducted to investigate the behavior of two-phase flow through a cylindrical perforation tunnel. Statistical analysis was coupled with numerical simulation to expand the investigation of fluid flow in the near-wellbore region that cannot be obtained experimentally. The statistical analysis investigated the effect of several parameters, including the liquid and gas flow rate, liquid viscosity, permeability, and porosity, on the injection build-up pressure and the time needed to reach a steady-state flow condition. Design-Expert® Design of Experiments (DoE) software was used to determine the numerical simulation runs using the ANOVA analysis with a Box-Behnken Design (BBD) model and ANSYS-FLUENT was used to analyses the numerical simulation of the porous media tunnel by applying the volume of fluid method (VOF). The experimental data were validated to the numerical results, and the comparison of results was in good agreement. The numerical and statistical analysis demonstrated each investigated parameter’s effect. The permeability, flow rate, and viscosity of the liquid significantly affect the injection pressure build-up profile, and porosity and gas flow rate substantially affect the time required to attain steady-state conditions. In addition, two correlations obtained from the statistical analysis can be used to predict the injection build-up pressure and the required time to reach steady state for different scenarios. This work will contribute to the clarification and understanding of the behavior of multiphase flow in the near-wellbore region.

scholarly journals NO Separation Characteristics in Integrated Electromigration Membrane Reactor

2020 ◽  
Vol 10 (15) ◽  
pp. 5071
Author(s):  
Zuwu Wang ◽  
Guifen Shen
Keyword(s):  
Mass Transfer ◽  
Transfer Coefficient ◽  
Mass Transfer Coefficient ◽  
Flow Rate ◽  
Total Mass ◽  
Membrane Reactor ◽  
Gas Flow ◽  
Separation Efficiency ◽  
Discharge Voltage ◽  
Gas Flow Rate

An integrated electromigration membrane absorption method has been proposed for the separation of NO from simulated mixed gas. The experiments were conducted to investigate the effect of discharge voltage, gas flow rate, inlet concentrations, and absorbents on the NO separation efficiency and total mass transfer coefficient in the integrated electromigration membrane reactor. The experimental results demonstrated that the NO separation efficiency and total mass transfer coefficient increased with the increase in the applied discharge voltage of the integrated electromigration membrane reactor. Regardless of discharge or not, the separation efficiency of NO continuously decreased with the increase in the gas flow rate and inlet concentration of NO in the experimental process. The total mass transfer coefficient of NO increased first and then decreased with an increase in the gas flow rate, while it decreased with an increase in NO inlet concentration. Compared with the membrane absorption without discharge voltage under the condition tested, at a discharge voltage of 18kV, the NO separation efficiency and the total mass transfer coefficient increased by 48.7% and 9.7 times, respectively.

Numerical Simulation and Experimental Study on Tar Decomposition of Low-Pressure Ejection Type Burner

2015 ◽  
Vol 1092-1093 ◽  
pp. 200-206
Author(s):  
De Fan Qing ◽  
Mao Kui Zhu ◽  
Yang Cheng Luo ◽  
Ya Long Zhang ◽  
Ai Rui Chen ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Flow Rate ◽  
Gas Flow ◽  
Low Pressure ◽  
Orthogonal Test ◽  
Nozzle Diameter ◽  
Design Parameters ◽  
Minor Effect ◽  
Gas Flow Rate ◽  
Tar Cracking

The tar decomposition of low-pressure ejection type burner was researched. The burner used software to simulate and analyse impact of the nozzle diameter d, the gas flow rate V and the distance of the nozzle to the wall L on tar cracking. The orthogonal test were used for design parameters d, V and L, the optimization values of these three parameters were carried out, and experimental method was used for test the numerical simulation results. Numerical simulation and experimental results showed that the greatest impact on tar cracking is the nozzle diameter d, the minor effect is the distance of the nozzle to the wall L and the weakest effect is the gas flow rate V, and when the nozzle diameter d=4 mm, the distance L=18 mm and the gas flow rate V=0.10 m3/h, the tar cracking is the most efficiency.

scholarly journals Particle deposition characteristics in entrained flow coal gasifier

2012 ◽  
Vol 16 (5) ◽  
pp. 1544-1548
Author(s):  
Sheng Liu ◽  
Ying-Li Hao
Keyword(s):  
Numerical Simulation ◽  
Flow Rate ◽  
Particle Deposition ◽  
Gas Flow ◽  
Water Flow Rate ◽  
Deposition Process ◽  
The Other ◽  
Central Channel ◽  
Gas Flow Rate ◽  
Coal Gasifier

Cold state experiment and numerical simulation are carried out to study particle deposition process. The deposit mass can be divided into two parts, one directly collides with the wall and the other is brought by the backflow. The deposit flux increases with the increase of gas flow rate or water flow rate or both, and decreases with the increase of the central channel gas flow rate.

Water Model Study on Circulation Rate Influenced by Snorkel, Nozzle and Blowing Parameters in RH Refining

2011 ◽  
Vol 287-290 ◽  
pp. 840-843 ◽  
Author(s):  
Sheng Li Li ◽  
Xin Gang Ai ◽  
Ning Wang ◽  
Nan Lv
Keyword(s):  
Flow Rate ◽  
Gas Flow ◽  
Water Model ◽  
Circulation Rate ◽  
Circulation Flow ◽  
Linear Scale ◽  
Gas Flow Rate ◽  
Model Study ◽  
Inner Diameter ◽  
Injection Depth

A water model of 1/4 linear scale for 210t RH has been established. RH circulation flow rate is measured by a velocimeter. The influences of lifting gas flow rate, snorkel inner diameter, injection depth and nozzle inner diameter on circulation rate were discussed. The dimension correlation has been calculated for the prediction of circulation rate. The results showed that the formula of circulation rate is 5.434×10-6G0.356·D1.254·d -0.106·H 0.821. The best nozzles inner diameter in terms of circulation rate was 3mm.

SCIENTIFIC AND ENGINEERING PRINCIPLES OF EFFICIENT FUEL USE AND ENVIRONMENTALLY FRIENDLY GAS COMBUSTION IN STOVE PLATES. PART 1. MODERN STATE-OF-THE-ART AND DIRECTIONS FOR IMPROVEMENT THE GAS BURNING IN DOMESTIC GAS COOKERS

2017 ◽  
pp. 3-18 ◽  
Author(s):  
B.S. Soroka ◽  
V.V. Horupa
Keyword(s):  
Natural Gas ◽  
Flow Rate ◽  
Gas Flow ◽  
Renewable Energy Sources ◽  
Combustion Process ◽  
Orifice Diameter ◽  
Firing Process ◽  
Gas Flow Rate ◽  
Gas Combustion ◽  
Gas Stoves

Natural gas NG consumption in industry and energy of Ukraine, in recent years falls down as a result of the crisis in the country’s economy, to a certain extent due to the introduction of renewable energy sources along with alternative technologies, while in the utility sector the consumption of fuel gas flow rate enhancing because of an increase the number of consumers. The natural gas is mostly using by domestic purpose for heating of premises and for cooking. These items of the gas utilization in Ukraine are already exceeding the NG consumption in industry. Cooking is proceeding directly in the living quarters, those usually do not meet the requirements of the Ukrainian norms DBN for the ventilation procedures. NG use in household gas stoves is of great importance from the standpoint of controlling the emissions of harmful components of combustion products along with maintenance the satisfactory energy efficiency characteristics of NG using. The main environment pollutants when burning the natural gas in gas stoves are including the nitrogen oxides NOx (to a greater extent — highly toxic NO2 component), carbon oxide CO, formaldehyde CH2O as well as hydrocarbons (unburned UHC and polyaromatic PAH). An overview of environmental documents to control CO and NOx emissions in comparison with the proper norms by USA, EU, Russian Federation, Australia and China, has been completed. The modern designs of the burners for gas stoves are considered along with defining the main characteristics: heat power, the natural gas flow rate, diameter of gas orifice, diameter and spacing the firing openings and other parameters. The modern physical and chemical principles of gas combustion by means of atmospheric ejection burners of gas cookers have been analyzed from the standpoints of combustion process stabilization and of ensuring the stability of flares. Among the factors of the firing process destabilization within the framework of analysis above mentioned, the following forms of unstable combustion/flame unstabilities have been considered: flashback, blow out or flame lifting, and the appearance of flame yellow tips. Bibl. 37, Fig. 11, Tab. 7.

Sign in / Sign up

Export Citation Format

Share Document