Development of Firmware for Automated Management System of Sounders with High Upgrading Rate

2014 ◽  
Vol 12 (1) ◽  
pp. 2-8
Author(s):  
A. Belousov ◽  
Y. Koshlich ◽  
A. Grebenik ◽  
O. Paraschuk
Keyword(s):  
Management System ◽  
Pulse Width Modulation ◽  
Experimental Studies ◽  
System Structure ◽  
Duty Factor ◽  
Technological Parameters ◽  
Web Based ◽  
Self Tuning ◽  
Technical Solutions ◽  
Automated Management

Abstract This article describes the approach to the construction of the Automated Management System (AMS) of sounders with high upgrading rate. The objective of this article is the synthesis of the structure of the automated management system of chime upon the principle of combined management with adaptive equalizer. Technical solutions have been created and implemented through the synthesized structure. As a result, we have developed the system structure itself, the mechanism of web-based access to its technological parameters and its self-tuning algorithm. Particular attention is paid to the selection of the best parameters of the control signal, namely, to the period and duty factor of the Pulse-Width Modulation (PWM), which was chosen as a means of changing the speed and direction of rotation of the motor driving the linkage. The analysis of experimental studies showed that in order to achieve the loudest sound one needs to vary the period and the duty factor of PWM, with regard to the environment.

TECHNICAL SOLUTIONS FOR INCREASING OF MACHINE MILKING COWS EFFICIENCY

2016 ◽  
Vol 11 (1) ◽  
pp. 77-81 ◽  
Author(s):  
Лукманов ◽  
Ruslan Lukmanov ◽  
Мустафин ◽  
Anas Mustafin ◽  
Зиганшин ◽  
...  
Keyword(s):  
Experimental Studies ◽  
Technological Parameters ◽  
Machine Milking ◽  
Operation Modes ◽  
Milking Machine ◽  
Technical Solutions

A device of disconnection a milking machine at the end of milking was created to improve the efficiency of machine milking cows. On the basis of theoretical and experimental studies we proved constructive and technological parameters and operation modes of the air engine.

A possibility of using nickel concentrate, obtained as a result of hydrometallurgical enrichment of manganese-containing raw materials, at steel alloying

2020 ◽  
Vol 76 (7) ◽  
pp. 709-715
Author(s):  
O. Yu. Kichigina
Keyword(s):  
Raw Materials ◽  
Experimental Studies ◽  
Selective Extraction ◽  
Technological Parameters ◽  
Nickel Iron ◽  
Nickel Recovery ◽  
Nickel Concentrate ◽  
Steel Alloying ◽  
High Degree ◽  
Comprehensive Processing

At production of stainless steel expensive alloying elements, containing nickel, are used. To decrease the steel cost, substitution of nickel during steel alloying process by its oxides is an actual task. Results of analysis of thermodynamic and experimental studies of nickel reducing from its oxide presented, as well as methods of nickel oxide obtaining at manganese bearing complex raw materials enrichment and practice of its application during steel alloying. Technology of comprehensive processing of complex manganese-containing raw materials considered, including leaching and selective extraction out of the solution valuable components: manganese, nickel, iron, cobalt and copper. Based on theoretical and experiment studies, a possibility of substitution of metal nickel by concentrates, obtained as a result of hydrometallurgical enrichment, was confirmed. Optimal technological parameters, ensuring high degree of nickel recovery out of the initial raw materials were determined. It was established, that for direct steel alloying it is reasonable to add into the charge pellets, consisting of nickel concentrate and coke fines, that enables to reach the through nickel recovery at a level of 90%. The proposed method of alloying steel by nickel gives a possibility to decrease considerably steel cost at the expense of application of nickel concentrate, obtained out of tails of hydrometallurgical enrichment of manganese-bearing raw materials, which is much cheaper comparing with the metal nickel.

Energy Management of Electromechanical Systems on the Board of a Ship

2020 ◽  
Vol 26 (3) ◽  
pp. 14-19
Author(s):  
Laurențiu Bogdan Asalomia ◽  
Gheorghe Samoilescu
Keyword(s):  
Energy Management ◽  
Management System ◽  
Integrated Management ◽  
Integrated Management System ◽  
Management Actions ◽  
Energy Flows ◽  
Reduce Emissions ◽  
Technical Solutions ◽  
Productive Time

AbstractThe paper analyzes, starting from the Integrated Management System, the role of automation, the role of the officer and the role of the Energy Management System on board the ship. The implementation of an EnMS establishes the structure and discipline of identifying energy flows, implementing management actions and, finally, applying technical solutions, which significantly reduce energy costs, reduce non-productive time in production, and reduce emissions. of Greenhouse Gases in the environment. The steps to be highlighted in the realization of energy management are analyzed.

Mapping of Protein-Protein Interactions: Web-Based Resources for Revealing Interactomes

2019 ◽  
Vol 26 (21) ◽  
pp. 3890-3910 ◽  
Author(s):  
Branislava Gemovic ◽  
Neven Sumonja ◽  
Radoslav Davidovic ◽  
Vladimir Perovic ◽  
Nevena Veljkovic
Keyword(s):  
Drug Discovery ◽  
Protein Interactions ◽  
Protein Complexes ◽  
Experimental Studies ◽  
Protein Protein Interactions ◽  
Web Based ◽  
Prediction Tools ◽  
Physiological Processes ◽  
Modern Drug ◽  
Ppi Prediction

Background: The significant number of protein-protein interactions (PPIs) discovered by harnessing concomitant advances in the fields of sequencing, crystallography, spectrometry and two-hybrid screening suggests astonishing prospects for remodelling drug discovery. The PPI space which includes up to 650 000 entities is a remarkable reservoir of potential therapeutic targets for every human disease. In order to allow modern drug discovery programs to leverage this, we should be able to discern complete PPI maps associated with a specific disorder and corresponding normal physiology. Objective: Here, we will review community available computational programs for predicting PPIs and web-based resources for storing experimentally annotated interactions. Methods: We compared the capacities of prediction tools: iLoops, Struck2Net, HOMCOS, COTH, PrePPI, InterPreTS and PRISM to predict recently discovered protein interactions. Results: We described sequence-based and structure-based PPI prediction tools and addressed their peculiarities. Additionally, since the usefulness of prediction algorithms critically depends on the quality and quantity of the experimental data they are built on; we extensively discussed community resources for protein interactions. We focused on the active and recently updated primary and secondary PPI databases, repositories specialized to the subject or species, as well as databases that include both experimental and predicted PPIs. Conclusion: PPI complexes are the basis of important physiological processes and therefore, possible targets for cell-penetrating ligands. Reliable computational PPI predictions can speed up new target discoveries through prioritization of therapeutically relevant protein–protein complexes for experimental studies.

scholarly journals Performance Evaluation of Heading-and-Winning Machines in the Conditions of Potash Mines

2021 ◽  
Vol 11 (8) ◽  
pp. 3444
Author(s):  
Sergey A. Lavrenko ◽  
Dmitriy I. Shishlyannikov
Keyword(s):  
Energy Efficiency ◽  
Experimental Studies ◽  
Efficiency Coefficient ◽  
Mechanized Method ◽  
Methodological Approaches ◽  
The Stability ◽  
Technical Solutions ◽  
Potash Mine ◽  
Complex Indicators ◽  
Potassium Magnesium

The authors focus on the process of potash ore production by a mechanized method. They show that currently there are no approved procedures for assessing the performance of heading-and-winning machines operating in the conditions of potash mines. This causes difficulties in determining the field of application of heading-and-winning machines, complicates the search for implicit technical solutions for the modernisation of existing models of mining units, prohibits real-time monitoring of the stability of stope-based technological processes and makes it difficult to assess the performance of the services concerning mining enterprises. The work represents an aggregate assessment of the performance of heading-and-winning machines for potash mines by determining complex indicators describing the technological and technical levels of organising the work in stopes. Such indicators are the coefficients of productivity and energy efficiency, respectively. Experimental studies have been carried out in the conditions of the potash mine of the Verkhnekamskoye potassium-magnesium salt deposit to assess the performance of the latest and most productive Ural-20R heading-and-winning machines manufactured in Russia. Using the above methodological approaches, this paper shows that the unsatisfactory technological performance of the studied machine is due to the low productivity of the mine district transport. The average productivity coefficient was 0.29. At the same time, high values of the energy efficiency coefficient show that the productivity of the machine is on par with design conditions.

Sign in / Sign up

Export Citation Format

Share Document