scholarly journals Numerical Analysis of Aerodynamic Characteristics of a of High-Speed Car With Movable Bodywork Elements

2015 ◽  
Vol 62 (4) ◽  
pp. 451-476 ◽  
Author(s):  
Tomasz Janson ◽  
Janusz Piechna
Keyword(s):  
Numerical Analysis ◽  
High Speed ◽  
Transient Flow ◽  
Aerodynamic Drag ◽  
Position Angle ◽  
Aerodynamic Characteristics ◽  
The Body ◽  
Ansys Fluent ◽  
Drag Forces ◽  
And Performance

Abstract This paper presents the results of numerical analysis of aerodynamic characteristics of a sports car equipped with movable aerodynamic elements. The effects of size, shape, position, angle of inclination of the moving flaps on the aerodynamic downforce and aerodynamic drag forces acting on the vehicle were investigated. The calculations were performed with the help of the ANSYS-Fluent CFD software. The transient flow of incompressible fluid around the car body with moving flaps, with modeled turbulence (model Spalart-Allmaras or SAS), was simulated. The paper presents examples of effective flap configuration, and the example of configuration which does not generate aerodynamic downforce. One compares the change in the forces generated at different angles of flap opening, pressure distribution, and visualization of streamlines around the body. There are shown the physical reasons for the observed abnormal characteristics of some flap configurations. The results of calculations are presented in the form of pressure contours, pathlines, and force changes in the function of the angle of flap rotation. There is also presented estimated practical suitability of particular flap configurations for controlling the high-speed car stability and performance.

scholarly journals Pipeline Compressor Redesign With the Consideration of Both Noise and Performance

2000 ◽  
Author(s):  
Yuri I. Biba ◽  
Zheji Liu ◽  
D. Lee Hill
Keyword(s):  
High Efficiency ◽  
Aerodynamic Characteristics ◽  
The Body ◽  
Design Parameters ◽  
Original Design ◽  
Tonal Noise ◽  
Experimental Performance ◽  
Expected Performance ◽  
Computational Fluid Dynamics Cfd ◽  
And Performance

A complete effort to redesign the aerodynamic characteristics of a single-stage pipeline compressor is presented. The components addressed are the impeller, diffuser region, and the volute. The innovation of this effort stems from the simultaneous inclusion of both the noise and aerodynamic performance as primary design parameters. The final detailed flange-to-flange analysis of the new components clearly shows that the operating range is extended and the tonal noise driven by the impeller is reduced. This is accomplished without sacrificing the existing high efficiency of the baseline machine. The body of the design effort uses both Computational Fluid Dynamics (CFD) and vibro-acoustics technology. The predictions are anchored by using the flange-to-flange analysis of the original design and its experimental performance data. By calculating delta corrections and assuming that these deltas are approximately the same for the new design, the expected performance is extrapolated.

Study of Aerodynamics on Indian Budget Concept Car

2020 ◽  
Vol 12 (5) ◽  
Author(s):  
Lakshay Khera ◽  
Niraj Kumar ◽  
Ambrish Maurya
Keyword(s):  
Fuel Consumption ◽  
High Speed ◽  
Lift Force ◽  
Aerodynamic Drag ◽  
Cost Effective ◽  
Medium Size ◽  
Technical Knowledge ◽  
Aerodynamic Design ◽  
Ansys Fluent ◽  
Computer Knowledge

Currently demand of Indian budget cars also called people’s car in India is in great demand and around 1 million cars have been sold in the last financial year with 12% increase of sales in every forthcoming year. These are categorized in sub 4m category of sedan, hatchbacks and medium size SUVs’ and their price ranges between 7 to 11 lakhs. The aerodynamics significantly affects the performance of the vehicle particularly at high speed. The manufactures are more focused on styling and giving a luxury look and other features of the car which sometimes make them to compromise on its aerodynamic design. This may lead to increase in fuel consumption at Indian road conditions. A cost-effective way to reduce fuel consumption, drag coefficient, lift force is to improve aerodynamic behavior and reduce the aerodynamic drag. The software used in this work is Solidworks, Ansys Fluent and commercial CFD post. Consequently, of using this software, it allows us to apply, learn and link technical knowledge of aerodynamics and computer knowledge.

The kinematics and performance of escape responses of the knifefish Xenomystus nigri

1993 ◽  
Vol 71 (1) ◽  
pp. 189-195 ◽  
Author(s):  
M. A. Kasapi ◽  
P. Domenici ◽  
R. W. Blake ◽  
D. Harper
Keyword(s):  
High Speed ◽  
Longitudinal Axis ◽  
The Body ◽  
Maximum Acceleration ◽  
Low Speed ◽  
Average Maximum ◽  
Morphological Specialization ◽  
Escape Responses ◽  
And Performance ◽  
Stage 1

The kinematics and performance of the escape responses of the knifefish Xenomystus nigri, a fish specialized for low-speed, undulatory median-fin propulsion, were recorded by means of high-speed cinematography. Two types of escape were observed, one involving the formation of a C-shape along the longitudinal axis of the fish (stage 1), followed by a slow recoil of the body (single bend); the other (double bend) involved stage 1 followed by a contralateral bend (stage 2). The pectoral fins were extended throughout escapes of both types. The average maximum acceleration for double bend escapes was 127.98 m∙s−2; acceleration was usually greatest in stage 1. In double bend escapes, turning angles for stages 1 and 2 were not correlated. Pitch and roll orientations change during escapes. In stage 1, the average roll and average pitch were linearly correlated, suggesting that roll was partly responsible for establishing pitch. Knifefish achieved high maximum acceleration relative to other fish. Therefore, performance was not compromised by morphological specialization for low-speed swimming; however, a negative correlation of pitch with acceleration in stage 1 suggested that escapes involve a trade-off between acceleration and confusing a predator by changing planar orientation.

Experimental Studies on Aerodynamic Characteristics of Pantograph System According to the Pantograph Cover Configurations for High Speed Train

2011 ◽  
Author(s):  
Yeongbin Lee ◽  
Minho Kwak ◽  
Kyu Hong Kim ◽  
Dong-Ho Lee
Keyword(s):  
Wind Tunnel ◽  
High Speed ◽  
Aerodynamic Drag ◽  
Aerodynamic Force ◽  
Experimental Studies ◽  
Wind Tunnel Test ◽  
Aerodynamic Characteristics ◽  
Experimental Models ◽  
High Speed Train ◽  
Drag And Lift

In this study, the aerodynamic characteristics of pantograph system according to the pantograph cover configurations for high speed train were investigated by wind tunnel test. Wind tunnel tests were conducted in the velocity range of 20∼70m/s with scaled experimental pantograph models. The experimental models were 1/4 scaled simplified pantograph system which consists of a double upper arm and a single lower arm with a square cylinder shaped panhead. The experimental model of the pantograph cover is also 1/4 scaled and were made as 4 different configurations. It is laid on the ground plate which modeled on the real roof shape of the Korean high speed train. Using a load cell, the aerodynamic force such as a lift and a drag which were acting on pantograph system were measured and the aerodynamic effects according to the various configurations of pantograph covers were investigated. In addition, the total pressure distributions of the wake regions behind the panhead of the pantograph system were measured to investigate the variations of flow pattern. From the experimental test results, we checked that the flow patterns and the aerodynamic characteristics around the pantograph systems are varied as the pantograph cover configurations. In addition, it is also found that pantograph cover induced to decrease the aerodynamic drag and lift forces. Finally, we proposed the aerodynamic improvement of pantograph cover and pantograph system for high speed train.

scholarly journals Mechanical models of sandfish locomotion reveal principles of high performance subsurface sand-swimming

2011 ◽  
Vol 8 (62) ◽  
pp. 1332-1345 ◽  
Author(s):  
Ryan D. Maladen ◽  
Yang Ding ◽  
Paul B. Umbanhowar ◽  
Adam Kamor ◽  
Daniel I. Goldman
Keyword(s):  
High Speed ◽  
High Performance ◽  
Granular Media ◽  
The Body ◽  
Physical Models ◽  
Particle Simulation ◽  
Sinusoidal Wave ◽  
Drag Forces ◽  
Single Period ◽  
Discrete Particle Simulation

We integrate biological experiment, empirical theory, numerical simulation and a physical model to reveal principles of undulatory locomotion in granular media. High-speed X-ray imaging of the sandfish lizard, Scincus scincus , in 3 mm glass particles shows that it swims within the medium without using its limbs by propagating a single-period travelling sinusoidal wave down its body, resulting in a wave efficiency, η , the ratio of its average forward speed to the wave speed, of approximately 0.5. A resistive force theory (RFT) that balances granular thrust and drag forces along the body predicts η close to the observed value. We test this prediction against two other more detailed modelling approaches: a numerical model of the sandfish coupled to a discrete particle simulation of the granular medium, and an undulatory robot that swims within granular media. Using these models and analytical solutions of the RFT, we vary the ratio of undulation amplitude to wavelength ( A / λ ) and demonstrate an optimal condition for sand-swimming, which for a given A results from the competition between η and λ . The RFT, in agreement with the simulated and physical models, predicts that for a single-period sinusoidal wave, maximal speed occurs for A / λ ≈ 0.2, the same kinematics used by the sandfish.

Numerical Simulation on Aerodynamic Characteristics of Heavy-Duty Commercial Vehicle

2011 ◽  
Vol 346 ◽  
pp. 477-482 ◽  
Author(s):  
Zhe Zhang ◽  
Ying Chao Zhang ◽  
Jie Li ◽  
Jia Wang
Keyword(s):  
Numerical Simulation ◽  
Fuel Economy ◽  
High Speed ◽  
Aerodynamic Drag ◽  
Aerodynamic Characteristics ◽  
National Standards ◽  
Heavy Duty ◽  
Commercial Vehicles ◽  
Automotive Technology ◽  
New Research

With the development of automotive technology and high-speed highway construction, the speed of the vehicles increase which cause the significant increase in the aerodynamic drag when road vehicles are moving. Thereby the power of the vehicles, fuel economy, operational stability and other properties are affected very seriously. Heavy-duty commercial vehicles as the most efficient way to transport goods on the highway are widely used, and the speed of the vehicles increases faster. Especially the demands for heavy-duty commercial vehicles are increasing in recent years. Reducing the aerodynamic drag by the analysis of external aerodynamic characteristics, improving the fuel economy and reducing energy consumption have become new research topics of heavy-duty commercial vehicles. To make the heavy-duty commercial vehicles meet the national standards of energy saving, a simplified heavy-duty commercial truck model was built in this paper. The numerical simulation of the vehicle was completed based on the theory of the aerodynamics. The aerodynamic characteristics were analyzed, according to the graphs of the pressure distribution, velocity distribution and flow visualization. To improve the aerodynamic characteristics of heavy-duty commercial vehicles, the main drag reduction measures are reducing the vortex of the cab and the container, the end of the container and the bottom of the container.

scholarly journals CFD Analysis of the Influence of the Front Wing Setup on a Time Attack Sports Car’s Aerodynamics

Energies ◽  
2021 ◽  
Vol 14 (23) ◽  
pp. 7907
Author(s):  
Maciej Szudarek ◽  
Janusz Piechna
Keyword(s):  
Aerodynamic Drag ◽  
Aerodynamic Characteristics ◽  
Vital Role ◽  
Front Axle ◽  
The Body ◽  
Strong Interactions ◽  
Unexpected Result ◽  
Proper Position ◽  
Pressure Distributions ◽  
Front Wing

In time attack races, aerodynamics plays a vital role in achieving short track times. These races are characterized by frequent braking and acceleration supported by aerodynamic downforce. Usually, typical cars are modified for these races by amateurs. Adjusting the aerodynamic solutions to work with bodies developed for other flow conditions is difficult. This paper presents the results of a numerical analysis of the effects of installing a straight wing in front of or above the body on the modified vehicle system’s aerodynamic characteristics, particularly on the front wheels’ aerodynamic downforce values. The paper presents the methodology and results of calculations of the aerodynamic characteristics of a car with an additional wing placed in various positions in relation to the body. The numerical results are presented (Cd, Cl, Cm, Clf, Clr), as well as exemplary pressure distributions, pathlines, and visualizations of vortex structures. Strong interactions between the wing operation and body streamline structure are shown. An interesting and unexpected result of the analysis is that the possibility of obtaining aerodynamic downforce of the front wheels is identified, without an increase in aerodynamic drag, by means of a wing placed in a proper position in front of the body. A successful attempt to balance the additional downforce coming from the front wing on the front axle is made using a larger spoiler. However, for large angles of attack, periodically unsteady flow is captured with frequency oscillations of ca. 6–12 Hz at a car speed of 40 m/s, which may interfere with the sports car’s natural suspension frequency.

Investigation on the Aerodynamic Efficiency of Braking Spoiler for High Speed Train Applications

2020 ◽  
pp. 2150009
Author(s):  
M. Vikraman ◽  
J. Bruce Ralphin Rose ◽  
S. Ganesh Natarajan
Keyword(s):  
High Speed ◽  
Cfd Simulation ◽  
Aerodynamic Drag ◽  
High Speed Train ◽  
Passenger Cars ◽  
High Speed Rail ◽  
Braking Performance ◽  
Simulation Tools ◽  
Drag Forces ◽  
Differential Drag

The demand for high speed rail networks is rapidly increasing in developing countries like India. One of the major constraints in the design and implementation of high speed train is the braking efficiency with minimum friction losses. Recently, the aerodynamic braking concept has received good attention and it has been incorporated for high speed bullet trains as a testing phase. The braking performance is extremely important to ensure the passenger safety specifically for the trains moving at more than 120[Formula: see text]km/h. In this paper, an Indian train configuration WAP7 (wide gauge AC electric passenger, Class 7) has been assumed with the locomotive and one passenger car. Aerodynamic braking system design is done by opening a spoiler over the train to amplify the aerodynamic drag at high speeds. The magnitude of braking force depends on the position and orientation of the braking spoiler. It creates differential drag forces at various deflection angles to decelerate the trains instantaneously in proportion to the running speeds. Drag created by the braking spoiler is observed numerically with the help of CFD simulation tools for further validation through wind tunnel experiments. Striking aerodynamic results are obtained with and without braking spoilers on the passenger cars and the spoiler at 40[Formula: see text]–50[Formula: see text] orientation makes greater drag coefficient as compared to the other angles.

Sign in / Sign up

Export Citation Format

Share Document