Novel methodology for turbine gas meters error curve modelling across a wide range of operating parameters

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Bogdan Blagojevič ◽  
Brane Širok ◽  
Benjamin Bizjan
Keyword(s):  
Gas Flow ◽  
Density Ratio ◽  
Data Fitting ◽  
Error Curve ◽  
Dimensionless Analysis ◽  
Wide Range ◽  
Curve Model ◽  
Machine Theory ◽  
Continuous Equation ◽  
Acceptability Criterion

Abstract In this paper, performance of turbine flowmeters was investigated for different flowmeter ranges and working gas operating pressures. Variation of these parameters was represented in dimensionless form as a function of Reynolds Number and gas density ratio, while the relative flow measurement error was selected as the most important operating characteristic. A novel error curve model based on turbine machine theory and dimensionless analysis was introduced for the purpose of error data fitting across a wide range of gas flow rates and operating pressures. The main advantage of the presented model is the capability of accurate error data fitting with a single continuous equation, as demonstrated by high R 2 {R^{2}} values for the vast majority of flowmeters analyzed in this study. The acceptability criterion was designed based on the fact that the expanded measurement uncertainty of the relative error must not exceed 0.5 %. Besides an accurate interpolation, our model can also be utilized for prediction of turbine flowmeter performance at modified flow conditions (pressure and flow rate, working gas properties), and for assessment of the drift of flowmeter performance over time. The novel error curve model is demonstrated to outperform the standard polynomial-based model regardless of the independent variable used.

Effect of Internal Coolant Crossflow on the Effectiveness of Shaped Film-Cooling Holes

2003 ◽  
Vol 125 (3) ◽  
pp. 547-554 ◽  
Author(s):  
Michael Gritsch ◽  
Achmed Schulz ◽  
Sigmar Wittig
Keyword(s):  
Film Cooling ◽  
Gas Flow ◽  
Flow Direction ◽  
Turbine Blades ◽  
Density Ratio ◽  
Cooling Effectiveness ◽  
Cooling Performance ◽  
Film Cooling Effectiveness ◽  
Hot Gas ◽  
Wide Range

Film-cooling was the subject of numerous studies during the past decades. However, the effect of flow conditions on the entry side of the film-cooling hole on film-cooling performance has surprisingly not received much attention. A stagnant plenum which is widely used in experimental and numerical studies to feed the holes is not necessarily a right means to re-present real engine conditions. For this reason, the present paper reports on an experimental study investigating the effect of a coolant crossflow feeding the holes that is oriented perpendicular to the hot gas flow direction to model a flow situation that is, for instance, of common use in modern turbine blades’ cooling schemes. A comprehensive set of experiments was performed to evaluate the effect of perpendicular coolant supply direction on film-cooling effectiveness over a wide range of blowing ratios (M=0.5…2.0) and coolant crossflow Mach numbers Mac=0…0.6. The coolant-to-hot gas density ratio, however, was kept constant at 1.85 which can be assumed to be representative for typical gas turbine applications. Three different hole geometries, including a cylindrical hole as well as two holes with expanded exits, were considered. Particularly, two-dimensional distributions of local film-cooling effectiveness acquired by means of an infrared camera system were used to give detailed insight into the governing flow phenomena. The results of the present investigation show that there is a profound effect of how the coolant is supplied to the hole on the film-cooling performance in the near hole region. Therefore, crossflow at the hole entry side has be taken into account when modeling film-cooling schemes of turbine bladings.

scholarly journals Atmospheric Pressure Plasma Deposition of TiO2: A Review

Materials ◽  
2020 ◽  
Vol 13 (13) ◽  
pp. 2931
Author(s):  
Soumya Banerjee ◽  
Ek Adhikari ◽  
Pitambar Sapkota ◽  
Amal Sebastian ◽  
Sylwia Ptasinska
Keyword(s):  
Atmospheric Pressure ◽  
Gas Flow ◽  
Plasma Deposition ◽  
Atmospheric Pressure Plasma ◽  
Cost Savings ◽  
Historical Background ◽  
Pressure Plasma ◽  
Wide Range ◽  
The Status ◽  
Deposition Techniques

Atmospheric pressure plasma (APP) deposition techniques are useful today because of their simplicity and their time and cost savings, particularly for growth of oxide films. Among the oxide materials, titanium dioxide (TiO2) has a wide range of applications in electronics, solar cells, and photocatalysis, which has made it an extremely popular research topic for decades. Here, we provide an overview of non-thermal APP deposition techniques for TiO2 thin film, some historical background, and some very recent findings and developments. First, we define non-thermal plasma, and then we describe the advantages of APP deposition. In addition, we explain the importance of TiO2 and then describe briefly the three deposition techniques used to date. We also compare the structural, electronic, and optical properties of TiO2 films deposited by different APP methods. Lastly, we examine the status of current research related to the effects of such deposition parameters as plasma power, feed gas, bias voltage, gas flow rate, and substrate temperature on the deposition rate, crystal phase, and other film properties. The examples given cover the most common APP deposition techniques for TiO2 growth to understand their advantages for specific applications. In addition, we discuss the important challenges that APP deposition is facing in this rapidly growing field.

scholarly journals Measurement and analysis of gas-puff density distributions for plasma radiation source z pinches

2001 ◽  
Vol 19 (4) ◽  
pp. 579-595 ◽  
Author(s):  
D. MOSHER ◽  
B.V. WEBER ◽  
B. MOOSMAN ◽  
R.J. COMMISSO ◽  
P. COLEMAN ◽  
...  
Keyword(s):  
Radiation Source ◽  
Gas Flow ◽  
Initial Density ◽  
High Sensitivity ◽  
Plasma Radiation ◽  
Analysis Techniques ◽  
Density Distributions ◽  
Radiation Properties ◽  
Wide Range ◽  
Measurement And Analysis

High-sensitivity interferometry measurements of initial density distributions are reviewed for a wide range of gas-puff nozzles used in plasma radiation source (PRS) z-pinch experiments. Accurate gas distributions are required for determining experimental load parameters, modeling implosion dynamics, understanding the radiation properties of the stagnated pinch, and for predicting PRS performance in future experiments. For a number of these nozzles, a simple ballistic-gas-flow model (BFM) has been used to provide good physics-based analytic fits to the measured r, z density distributions. These BFM fits provide a convenient means to smoothly interpolate radial density distributions between discrete axial measurement locations for finer-zoned two-dimensional MHD calculations, and can be used to determine how changes in nozzle parameters and load geometry might alter implosion dynamics and radiation performance. These measurement and analysis techniques are demonstrated for a nested-shell nozzle used in Double Eagle and Saturn experiments. For this nozzle, the analysis suggests load modifications that may increase the K-shell yield.

Study of Gas Flow in Micronozzles Using an Unstructured DSMC Method

2009 ◽  
Author(s):  
Ehsan Roohi ◽  
Masoud Darbandi ◽  
Vahid Mirjalili
Keyword(s):  
Boundary Layer ◽  
Knudsen Number ◽  
Gas Flow ◽  
Subsonic Flow ◽  
Flow Behavior ◽  
Boundary Layer Separation ◽  
Back Pressure ◽  
Viscous Force ◽  
Dsmc Method ◽  
Wide Range

The current research uses an unstructured direct simulation Monte Carlo (DSMC) method to numerically investigate supersonic and subsonic flow behavior in micro convergent–divergent nozzle over a wide range of rarefied regimes. The current unstructured DSMC solver has been suitably modified via using uniform distribution of particles, employing proper subcell geometry, and benefiting from an advanced molecular tracking algorithm. Using this solver, we study the effects of back pressure, gas/surface interactions (diffuse/specular reflections), and Knudsen number, on the flow field in micronozzles. We show that high viscous force manifesting in boundary layers prevents supersonic flow formation in the divergent section of nozzles as soon as the Knudsen number increases above a moderate magnitude. In order to accurately simulate subsonic flow at the nozzle outlet, it is necessary to add a buffer zone to the end of nozzle. If we apply the back pressure at the outlet, boundary layer separation is observed and a region of backward flow appears inside the boundary layer while the core region of inviscid flow experiences multiple shock-expansion waves. We also show that the wall boundary layer prevents forming shocks in the divergent part. Alternatively, Mach cores appear at the nozzle center followed by bow shocks and an expansion region.

The Pyrocarbon Deposition Techniques of Mechanical Heart Valve Prostheses

2011 ◽  
Vol 464 ◽  
pp. 749-752 ◽  
Author(s):  
Jian Hui Zhang ◽  
Xin Chen
Keyword(s):  
Fluidized Bed ◽  
Heart Valve ◽  
Gas Flow ◽  
Mechanical Heart Valve ◽  
Carbon Matrix ◽  
Artificial Heart Valve ◽  
Bed Temperature ◽  
Wide Range ◽  
Isotropic Carbon ◽  
Deposition Conditions

The structure and property of pyrocarbon varies widely with different deposition conditions. The isotropic carbon which can only been deposited in the bed of fluidized particles is very important in biomedical fields, for instance, it is often used as the coating of artificial heart valve components. The deposition of isotropic pyrocarbon containing silicon is experimented in fluidized bed over a wide range of deposition conditions. The results show that bed temperature influences strongly average coating rate, coating density, silicon content and coating micro-hardness. Propane concentration has a much effect on coating density, carbon matrix density and isotropic characteristics. Total gas flow rate and inlet dimension of fluidized bed affect the formation of fluidized bed.

Micro-Scale Flow Simulations and Permeability Estimation of Cleat Networks in Coal

2016 ◽  
Vol 846 ◽  
pp. 42-47
Author(s):  
J. Busse ◽  
S. Galindo Torres ◽  
Alexander Scheuermann ◽  
L. Li ◽  
D. Bringemeier
Keyword(s):  
Gas Flow ◽  
Structural Information ◽  
Porous Matrix ◽  
Groundwater Levels ◽  
Micro Scale ◽  
Wide Range ◽  
Boltzmann Method ◽  
The Impact ◽  
Flow Experiments

Coal mining raises a number of environmental and operational challenges, including the impact of changing groundwater levels and flow patterns on adjacent aquifer and surface water systems. Therefore it is of paramount importance to fully understand the flow of water and gases in the geological system on all scales. Flow in coal seams takes place on a wide range of scales from large faults and fractures to the micro-structure of a porous matrix intersected by a characteristic cleat network. On the micro-scale these cleats provide the principal source of permeability for fluid and gas flow. Description of the behaviour of the flow within the network is challenging due to the variations in number, sizing, orientation, aperture and connectivity at a given site. This paper presents a methodology to simulate flow and investigate the permeability of fractured media. A profound characterization of the geometry of the cleat network in micrometer resolution can be derived by CT-scans. The structural information is fed into a Lattice Boltzmann Method (LBM) based model that allows the implementation of virtual flow experiments. With the application of suitable hydraulic boundary conditions the full permeability tensor can be calculated in 3D.

High Resolution Measurements of Local Effectiveness by Discrete Hole Film Cooling

1999 ◽  
Author(s):  
S. Baldauf ◽  
A. Schulz ◽  
S. Wittig
Keyword(s):  
Surface Temperature ◽  
Film Cooling ◽  
Density Ratio ◽  
Geometrical Parameters ◽  
Element Analysis ◽  
Cooling Effectiveness ◽  
Film Cooling Effectiveness ◽  
Flow Parameters ◽  
Wide Range ◽  
Local Measurements

Local adiabatic film cooling effectiveness on a flat plate surface downstream a row of cylindrical holes was investigated. Geometrical parameters like blowing angle and hole pitch as well as the flow parameters blowing rate and density ratio were varied in a wide range emphasizing on engine relevant conditions. An IR-thermography technique was used to perform local measurements of the surface temperature field. A spatial resolution of up to 7 data points per hole diameter extending up to 80 hole diameters downstream of the ejection location was achieved. Since all technical surface materials have a finite thermoconductivity, no ideal adiabatic conditions could be established. Therefore, a procedure for correcting the measured surface temperature data based on a Finite Element analysis was developed. Heat loss over the backside of the testplate and remnant heat flux within the testplate in lateral and streamwise direction were taken into account. The local effectiveness patterns obtained are systematically analyzed to quantify the influence of the various parameters. As a result, a detailed description of the characteristics of local adiabatic film cooling effectiveness is given. Furthermore, the locally resolved experimental results can serve as a data base for the validation of CFD-codes predicting discrete hole film cooling.

scholarly journals Innovative neon refrigeration unit operating down to 30 K

2020 ◽  
Vol 324 ◽  
pp. 01003
Author(s):  
Petar Dalakov ◽  
Erik Neuber ◽  
Jürgen Klier ◽  
Ralf Herzog
Keyword(s):  
Gas Flow ◽  
Low Cost ◽  
Cryogenic System ◽  
Thermodynamic Efficiency ◽  
Chain Process ◽  
Temperature Level ◽  
Technological Chain ◽  
Refrigeration Unit ◽  
Wide Range ◽  
Helium Mixture

A new compact, low-cost, economically competitive and environmentally friendly cryogenic system for cooling a continuous gas flow down to about 30 K is under developing at the ILK Dresden, reported in this paper. The paper shows thermodynamic calculations of cycles on neon and neon-helium mixtures. The assessment of the degree of thermodynamic perfection of the neon cycles in comparison of neon-helium cycles is provided. The use of neon and neon-helium mixture in cryogenic cycles for cryostatting at a temperature level of 27…63 K will increase the thermodynamic efficiency of the cryogenic system and reduce the energy costs of obtaining cold at this temperature level. A technological chain/process, as well as the main economic indicators of the system under development are presented. The availability of such an innovative refrigeration system can be used in a wide range of cryogenic and cooling applications.

NUMERICAL SIMULATION OF RAYLEIGH–TAYLOR INSTABILITY BASED ON AN IMPROVED PARTICLE LEVEL SET METHOD

2014 ◽  
Vol 11 (04) ◽  
pp. 1350094 ◽  
Author(s):  
HUI TIAN ◽  
GUOJUN LI ◽  
XIONGWEN ZHANG
Keyword(s):  
Level Set Method ◽  
Level Set ◽  
Stokes Equations ◽  
Density Ratio ◽  
Immiscible Fluids ◽  
Taylor Instability ◽  
Wide Range ◽  
Particle Level ◽  
Rayleigh Taylor Instability ◽  
Particle Level Set Method

An improved particle correction procedure for particle level set method is proposed and applied to the simulation of Rayleigh–Taylor instability (RTI) of the incompressible two-phase immiscible fluids. In the proposed method, an improved particle correction method is developed to deal with all the relative positions between escaped particles and cell corners, which can reduce the disturbance arising in the distance function correction process due to the non-normal direction movement of escaped particles. The improved method is validated through accurately capturing the moving interface of the Zalesak's disk. Furthermore, coupled with the projection method for solving the Navier–Stokes equations, the time-dependent evolution of the RTI interface over a wide range of Reynolds numbers, Atwood numbers and Weber numbers are numerically investigated. A good agreement between the present results and the existing analytical solutions is obtained and the accuracy of the proposed method is further verified. Moreover, the effects of control parameters including viscosity, density ratio, and surface tension coefficient on the evolution of RTI are analyzed in detail, and a critical Weber number for the development of RTI is found.

scholarly journals Glass-on-Glass Fabrication of Bottle-Shaped Tunable Microlasers and their Applications

2016 ◽  
Vol 6 (1) ◽  
Author(s):  
Jonathan M. Ward ◽  
Yong Yang ◽  
Síle Nic Chormaic
Keyword(s):  
Gas Flow ◽  
60 Ghz ◽  
Melting Points ◽  
Simple Method ◽  
Flow Sensitivity ◽  
Whispering Gallery ◽  
Wide Range ◽  
Novel Method ◽  
Doped Glass ◽  
Lasing Modes

Abstract We describe a novel method for making microbottle-shaped lasers by using a CO2 laser to melt Er:Yb glass onto silica microcapillaries or fibres. This is realised by the fact that the two glasses have different melting points. The CO2 laser power is controlled to flow the doped glass around the silica cylinder. In the case of a capillary, the resulting geometry is a hollow, microbottle-shaped resonator. This is a simple method for fabricating a number of glass whispering gallery mode (WGM) lasers with a wide range of sizes on a single, micron-scale structure. The Er:Yb doped glass outer layer is pumped at 980 nm via a tapered optical fibre and WGM lasing is recorded around 1535 nm. This structure facilitates a new way to thermo-optically tune the microlaser modes by passing gas through the capillary. The cooling effect of the gas flow shifts the WGMs towards shorter wavelengths and thermal tuning of the lasing modes over 70 GHz is achieved. Results are fitted using the theory of hot wire anemometry, allowing the flow rate to be calibrated with a flow sensitivity as high as 72 GHz/sccm. Strain tuning of the microlaser modes by up to 60 GHz is also demonstrated.

Sign in / Sign up

Export Citation Format

Share Document