scholarly journals Management zones based on corn yield and soil physical attributes

2015 ◽  
Vol 33 (3) ◽  
pp. 373-382 ◽  
Author(s):  
Milton F. Alarcón-Jiménez ◽  
Jesús H. Camacho-Tamayo ◽  
Jaime H. Bernal
Keyword(s):  
Agricultural Production ◽  
Particle Density ◽  
Total Porosity ◽  
Descriptive Statistics ◽  
Multivariate Techniques ◽  
Corn Yield ◽  
Regular Grid ◽  
Management Zones ◽  
Physical Attributes ◽  
Results Management

The need to increase the yield and thus the income of farmers and provide food for the growing population requires the search for more efficient and innovative ways for growing, such as management by zones or site-specific practices. This knowledge improves the process of decision making in agricultural production for better crop management. The aim of this study was to determine zones of agricultural management based on corn yield and its relationship with some physical attributes in an Oxisol on the Eastern plains of Colombia. For this, the soil sampling was done in a regular grid whose sampling points were spaced every 70 m, in an area of 37 ha. The studied soil attributes were penetration resistance (PR), texture, total porosity (TP), macropores, mesopores, micropores, saturated hydraulic conductivity (KS), bulk density (BD), particle density (PD), soil water content (SW) and yield. The results were analyzed using descriptive statistics, geostatistics and multivariate techniques. From these results, management zones were defined. The soil physical attributes presented high variability in the different regions of the sampled area. The methods used for characterizing the management zones, allowed for identifying which area presented the best physical characteristics, an area that also showed the highest production of maize, similar in the different methods that were studied.

scholarly journals Physical attributes of a pasture soil in southeast Goiás determined by geostatistics

2016 ◽  
Vol 36 (1) ◽  
pp. 143-151 ◽  
Author(s):  
Gabriel G. de G. Cardoso ◽  
Rilley C. Wanderley ◽  
Mara L. C. Souza
Keyword(s):  
Spatial Dependence ◽  
Particle Density ◽  
Three Dimensional ◽  
Total Porosity ◽  
Exponential Model ◽  
Indicator Kriging ◽  
Soil Samples ◽  
Regular Sampling ◽  
Physical Attributes ◽  
Porosity Analysis

ABSTRACT This study aimed to evaluate the spatial dependence of physical attributes in a soil cultivated with Brachiaria grass. A 12-m regular sampling grid was established within an area of 3.500 m2. Thirty-five soil samples were collected at 0-30 cm depth for particle density, bulk density, texture and total porosity analysis. These data were evaluated using statistical methods of indicator kriging and the GS+ software. The GS+ software was used to develop three-dimensional maps and evaluate semivariograms. The spatial dependence was evaluated using experimental semivariograms. The analyzed attributes indicated the occurrence of spatial dependence when fit to the exponential model. Areas with higher porosity occurred in the regions with lower bulk densities and higher particle densities.

scholarly journals Physical Attributes of Soil in Different Forest Cover in South of Tocantins

2019 ◽  
pp. 1-7
Author(s):  
Josué Luiz Marinho Junior ◽  
Marcileia Dias de Oliveira ◽  
João Lucas Aires Dias ◽  
Renisson Neponuceno de Araújo Filho ◽  
José de Oliveira Melo Neto ◽  
...  
Keyword(s):  
Soil Texture ◽  
Granulometric Composition ◽  
Forest Cover ◽  
Particle Density ◽  
Total Porosity ◽  
Sensu Stricto ◽  
Tukey Test ◽  
Physical Problems ◽  
Texture Density ◽  
Physical Attributes

Eucalyptus planting represents 72.7% of the total area of planted trees in Brazil, and is constantly growing in the Cerrado biome. Thus, the present study aimed to evaluate the physical qualities of soil under Eucalyptus sp. and a fragment of cerrado sensu stricto. The study was conducted at the experimental farm of the Federal University of Tocantins, campus Gurupi, TO, on the coordinates 11º 46’ 25’’ latitude S and 49º 02’ 54’’ longitude W, in soil classified as Plinthosol petric. The collections were performed in the layer with a depth of 0–20 cm, with eleven repetitions for each area. The attributes evaluated were: soil texture, density (DS), particle density (PD) and total porosity (TP). The soil granulometric composition in the two studied areas was predominant of the sandy fraction. The values of DS, PD and TP did not show significant differences by Tukey test (5%), which assumes that the change of cover from cerrado sensu stricto to forest planted with Eucalyptus sp. does not favor physical problems for the soil under study.

scholarly journals Changing in chemical and physical attributes of a sandy soil under irrigated mango cultivation in semiarid region

2018 ◽  
Vol 8 (3) ◽  
pp. 404-413 ◽  
Author(s):  
Augusto Miguel N. Lima ◽  
José Alberto Ferreira Cardoso ◽  
Tony Jarbas Ferreira Cunha ◽  
Marcos Sales Rodrigues ◽  
Luis Carlos Hernani ◽  
...  
Keyword(s):  
Land Use ◽  
Particle Density ◽  
Land Use Changes ◽  
Total Porosity ◽  
Fruit Production ◽  
Soil Samples ◽  
Semiarid Region ◽  
Exchangeable Acidity ◽  
Physical Attributes ◽  
The Impact

Accelerated land use changes have been observed in Brazil. In Northeast, the Caatinga (native vegetation) has been replaced by fruit production, especially by mango and grapevine cultivation. Land use changes, tied to management techniques, can change the soil chemical and physical attributes. Thus, the present study aimed to evaluate the impact of irrigated mango cultivation in soil chemical and physical attributes in relation to the native Caatinga in the semi-arid region. The study was carried out at Boa Esperança Farm located in Petrolina, Pernambuco State, Brazil. In areas under irrigated mango and native Caatinga soil samples at 0-10 and 10-20 cm depth were collected. After collected and prepared soil samples, it was determined the macro (Ca2+, Mg2+, K+, P) and micronutrients (Cu2+, Fe2+, Zn2+, Mn2+) contents, Na content, electrical conductivity, pH, exchangeable acidity (Al3+) and potential acidity (H+Al). It was also determined soil texture, bulk density, particle density and total porosity. The mango cultivation increased the macronutrient contents, as well as, the micronutrients except for Fe2+ content. The physical attributes did not show difference comparing irrigated mango to native caatinga.

Dynamic Comparison of the Fruit Sector and the Pollution Associated to Agriculture

2018 ◽  
Vol 69 (10) ◽  
pp. 2776-2780
Author(s):  
Valentina Constanta Tudor ◽  
Ionela Mituko Vlad ◽  
Diana Zamfir Vasca
Keyword(s):  
Agricultural Production ◽  
Descriptive Statistics ◽  
The Public ◽  
Perennial Plants ◽  
National Statistics ◽  
The Impact

Pollution in agriculture plays a major role. One of the sector affected by this phenomenon is the perennial plants, such as fruits sector. This sector is an important part of agricultural production in Romania, mainly because of the areas that have been dedicated; that is why the sector should be reconsidered because it could be one of the engines of the agriculture. This have to led to important efforts and increased attention in managing the opportunities offered by the development of the associations and producer groups involved. The present paper aims to address certain aspects of the national, macro-regional and European aspects of these fruits productions and the impact of the degree of pollution in agriculture. In this respect, data derived from the public databases dedicated to this field, namely Eurostat, the National Statistics Institute, DG Agriculture / FADN database and the Ministry of Agriculture, were used. The methods used to analyze and interpret the results are descriptive statistics, dynamics and comparisons between target areas and indicators. The results highlighted in the first part of the paper the Romania�s position upon the European average in what concern the fruit sector but also upon a competing country on the fruit market, Poland, which is considered to have a European top position.

scholarly journals Physical attributes of kaolinitic and oxidic oxisols resulting from different usage systems

2004 ◽  
Vol 47 (5) ◽  
pp. 725-732 ◽  
Author(s):  
José Frederico Centurion ◽  
Amauri Nelson Beutler ◽  
Zigomar Menezes de Souza
Keyword(s):  
Bulk Density ◽  
Total Porosity ◽  
Soil Bulk Density ◽  
Physical Attributes ◽  
Medium Texture

The objective of this study was to assess the physical attributes of a kaolinitic oxisol, medium texture (Haplustox) and an oxidic oxisol, clayey (Eutrustox) under different usage systems, localized in the region of Jaboticabal, SP, Brazil. The usage systems were sugarcane, cotton and forest. Parameters such as soil bulk density, total porosity, macro and microporosity at the depths of 0.0-0.1; 0.1-0.2; 0.2-0.3, and 0.3-0.4 m were evaluated. Haplustox showed greater bulk density and smaller total porosity, macro and microporosity. The usage increased the bulk density in 0.0-0.3 m depth, with greater effects on the kaolinitic oxisol, mainly in 0.1-0.2 m depth in the areas cultivated with sugarcane.

scholarly journals INFLUÊNCIA DA COMPACTAÇÃO E DO CULTIVO DE SOJA NOS ATRIBUTOS FÍSICOS E NA CONDUTIVIDADE HIDRÁULICA EM LATOSSOLO VERMELHO

Irriga ◽  
2003 ◽  
Vol 8 (3) ◽  
pp. 242-249 ◽  
Author(s):  
Amauri Nelson Beutler ◽  
José Frederico Centurion ◽  
Cassiano Garcia Roque ◽  
Zigomar Menezes de Souza
Keyword(s):  
Hydraulic Conductivity ◽  
Bulk Density ◽  
Soil Compaction ◽  
Soil Surface ◽  
Total Porosity ◽  
Soil Condition ◽  
Agricultural Science ◽  
Water Infiltration ◽  
Loose Soil ◽  
Physical Attributes

INFLUÊNCIA DA COMPACTAÇÃO E DO CULTIVO DE SOJA NOS ATRIBUTOS FÍSICOS E NA CONDUTIVIDADE HIDRÁULICA EM LATOSSOLO VERMELHO   Amauri Nelson BeutlerJosé Frederico CenturionCassiano Garcia RoqueZigomar Menezes de SouzaDepartamento de Solos e Adubos, Faculdade de Ciências Agrárias e Veterinárias, Universidade Estadual Paulista, Jaboticabal, SP. CEP 14870-000. E-mail: [email protected], [email protected]  1 RESUMO              Este estudo teve como objetivo determinar a influência da compactação e do cultivo de soja nos atributos físicos e na condutividade hidráulica de um Latossolo Vermelho de textura média. O experimento foi conduzido na Universidade Estadual Paulista – Faculdade de Ciências Agrárias e Veterinárias, Jaboticabal (SP). Os tratamentos foram: 0, 1, 2, 4 e 6 passadas de um trator, uma ao lado da outra perfazendo toda a superfície do solo, com quatro repetições. O delineamento experimental foi inteiramente casualizado para a condutividade hidráulica e, em esquema fatorial 5 x 2 para os atributos físicos. Foram coletadas amostras de solo nas faixas de profundidades de 0,02-0,05; 0,07-0,10 e 0,15-0,18 m, por ocasião da semeadura e após a colheita para determinação da densidade do solo, porosidade total, macro e microporosidade do solo. A condutividade hidráulica do solo foi determinada após a colheita. O tempo entre a semeadura e a colheita de soja foi suficiente para aumentar a compactação do solo apenas na condição de solo solto. A compactação do solo reduziu a condutividade hidráulica em relação a condição natural (mata) e a condição de solo solto, sendo que esta não foi reduzida, após a primeira passagem, com o aumento no número de passagens.  UNITERMOS: Densidade do solo, porosidade do solo, infiltração de água, soja.  BEUTLER, A. N.; CENTURION, J. F.; ROQUE, C. G.; SOUZA, Z. M. COMPACTION AND SOYBEAN GROW INFLUENCE ON PHYSICAL ATTRIBUTES AND  HYDRAULIC CONDUCTIVITY IN RED LATOSSOL SOIL   2 ABSTRACT  The purpose of this study was to determine the influence of compaction and soybean grow on physical attributes and hydraulic conductivity of a Red Latossol, medium texture soil. The experiment was carried out in the experimental farm at the Paulista State University  – Agricultural Science College, Jaboticabal – São Paulo state. The treatments were 0, 1, 2, 4 and 6 side-by-side tractor strides on the soil surface with four replications. The experimental design was completely randomized for hydraulic conductivity and a 5 x 2 factorial design for soil physical attributes. Soil samples have been collected at 0.02-0.05, 0.07-0.10 and 0.15-0.18 m depth at sowing season and after harvest in order to determine soil bulk density, total porosity, macro and micro porosity. Soil hydraulic conductivity was determined after harvest. The time period between the soybean sowing and harvesting was enough to increase soil compaction only in loose soil condition. Soil compaction reduced hydraulic conductivity compared to the natural (forest) and loose soil condition  KEYWORDS: Bulk density, soil porosity, water infiltration, soybean.

scholarly journals Implications of Agricultural Gypsum Doses in Physical-Hydric Attributes of a Typic Haplortox and on Root Growth and Soybean Productivity

2019 ◽  
Vol 11 (4) ◽  
pp. 549
Author(s):  
Francisco de Assis Guedes Júnior ◽  
Deonir Secco ◽  
Luiz Antônio Zanão Júnior ◽  
Luciene Kazue Tokura ◽  
Marcos Felipe Leal Martins
Keyword(s):  
Hydraulic Conductivity ◽  
Root Growth ◽  
Block Design ◽  
Total Porosity ◽  
Calcium Deficiency ◽  
Saturated Hydraulic Conductivity ◽  
Soil Density ◽  
Randomized Block Design ◽  
Significant Difference ◽  
Physical Attributes

The response to agricultural gypsum, as a conditioner of the root environment in depth, has been observed for most annual crops. These responses are attributed to the better distribution of roots of the crops in depth in the soil by the reduction of chemical impediments, caused by the exchangeable aluminum and calcium deficiency in these layers, which allows to the plants the use of greater volume of water when they occur summer. In this way, the objective of this study was to evaluate the effects of gypsum doses on physical-hydric attributes, root growth and soybean productivity. The experiment was conducted at the Agronomic Institute of Paraná (IAPAR) in Santa Tereza do Oeste-PR. The soil was classified as Typic Haplortox. Five doses of agricultural gypsum were evaluated: 0; 3; 6; 9 and 12 t ha-1, in outline randomized block design with six repetitions. Soil density, total porosity, macroporosity, microporosity and saturated hydraulic conductivity were evaluated at layers of 0.0-0.1; 0.1-0.2 and 0.2-0.3 m. Soybean productivity and root growth were also evaluated. Data were submitted to regression analysis. The physical attributes soil density, macroporosity and saturated hydraulic conductivity did not differ significantly with the application of the gypsum doses in the 0.0-0.1 and 0.2-0.3 m layers. However, in the 0.1-0.2 m layer, due to pressures imposed by the machines and agricultural implements deforming the soil, there were significant differences in the physical attributes of the density, macroporosity and saturated hydraulic conductivity. There was no significant difference in grain productivity and root growth of soybean.

A Class of Hyperspace Systems and Distributional Chaos

2014 ◽  
Vol 670-671 ◽  
pp. 1570-1572
Author(s):  
Wei Wang ◽  
Xiao Gang Zhu
Keyword(s):  
Dynamical System ◽  
Difference Equation ◽  
Agricultural Production ◽  
Irrigation District ◽  
Corn Yield ◽  
Primitive Substitution ◽  
Yield Analysis ◽  
Distributional Chaos ◽  
Dynamical Properties ◽  
Ecological Difference

Research on dynamical system has penetrated into many problems of agricultural production, such as prediction of corn yield, analysis on operational situation of irrigation district and research on ecological difference equation. In this paper, we investigated dynamical properties for non-primitive substitution and the set-valued maps induced by the substitution. We proved In two cases that the hyperspace systems induced by non-primitive substitution are not distributional chaotic.

Evaluation of the potential of feedstock combinations and their biochars for soil amendment

2021 ◽  
pp. 0734242X2110606
Author(s):  
Maliheh Fouladidorhani ◽  
Mohammad Shayannejad ◽  
Emmanuel Arthur
Keyword(s):  
Physicochemical Properties ◽  
Soil Amendment ◽  
Particle Density ◽  
Soil Amendments ◽  
Organic Matter Content ◽  
Total Porosity ◽  
Matter Content ◽  
Cow Manure ◽  
N Content ◽  
Pine Wood

One of the approaches for recycling and reusing agricultural and animal wastes is to pyrolyse the residues and subsequently use them as soil amendments. The prevalence of several feedstocks suggests that it is necessary to investigate the optimal combinations of feedstocks and pyrolysis temperature for use as soil amendments. This study was done to evaluate five combinations of raw materials (sugarcane bagasse, rice husk, cow manure and pine wood) and their biochars produced by slow pyrolysis at 300°C and 500°C for soil amendment. Several physicochemical properties (electrical conductivity (EC), pH, cation exchange capacity (CEC), total organic matter content (C) total porosity (TP), total nitrogen (N), particle density (PD) and bulk density (BD)) were investigated. Comparison among feedstocks showed that the highest PD, BD and CEC were observed in WM (cow manure-pine wood). The pyrolysis process increased the PD, TP, N and monovalent cations and decreased EC, CEC and BD. Compared to the feedstock, pyrolysis increased the N content, but higher temperatures lowered the N content. Pyrolysis at 500°C reduced the EC, N, CEC and biochar yield by 18%, 13%, 21% and 24% respectively, compared to 300°C. Pyrolysis at 500°C increased the pH, Na+ and K+ by 17%, 12% and 22%, respectively, compared to 300°C. Considering the physicochemical properties of biochar and the costs, the bagasse-wood-rice (BWR) combination and temperature of 300°C are suggested for biochar production for soil amendment.

Sign in / Sign up

Export Citation Format

Share Document