scholarly journals Interpretation of aeromagnetic data using GIS to evaluate the geotectonic regime of the Sabinas Basin

2017 ◽  
Vol 21 (4) ◽  
pp. 175-181
Author(s):  
Jose Alberto Batista
Keyword(s):  
Magnetic Field ◽  
Information System ◽  
Mineral Deposits ◽  
Quantitative Interpretation ◽  
Aeromagnetic Data ◽  
Total Magnetic Field ◽  
Qualitative And Quantitative ◽  
Geophysical Interpretation ◽  
Geophysical Information ◽  
The Relationship

The study present the use of Geographic Information System (GIS) to assess the geotectonic regimen of the Sabinas Basin. Initially, the GIS database was designed using geological and geophysical information (total magnetic field reduced to the pole). Subsequently, 2D models of the basin were obtained along 4 profiles running on a north-south direction. The implementation of GIS enables a geological-geophysical interpretation generating various thematic maps that overlap the magnetic map during interpretation. The analysis of overlapping maps enables the identification of areas with different geotectonic regimes in the Sabinas Basin, as well as the relationship between these environments and mineralization. The qualitative and quantitative interpretation of the aeromagnetic data obtained for the total magnetic field reduced to the pole delineate uplifted basement areas as well as shallower blocks within them. This paper presents the location of both the basin´s deepest zones and its probable faults, which can be linked to the block boundaries. The faults zones and block boundaries correspond to the main mineral deposits found in the basin. Finally, the geotectonic regime of some sectors of the basin is detailed in order to reaffirm the results obtained by the interpretation of aeromagnetic data.

Does draping aeromagnetic data reduce terrain‐induced effects?

Geophysics ◽  
1984 ◽  
Vol 49 (1) ◽  
pp. 75-80 ◽  
Author(s):  
V. J. S. Grauch ◽  
David L. Campbell
Keyword(s):  
Magnetic Field ◽  
Magnetic Behavior ◽  
The Other ◽  
Aeromagnetic Data ◽  
Total Magnetic Field ◽  
Vertical Derivative ◽  
Topographic Features ◽  
Other Hand ◽  
Terrain Effects ◽  
The Difference

Contrary to intuition, draped aeromagnetic surveys (when compared to typical level surveys) amplify, rather than reduce, the problem of magnetic‐terrain anomalies. Calculations of the total magnetic field of various simple magnetic topographies on level and draped surfaces support this conclusion. In cases where draped surfaces are lower than level surfaces, the draped profiles exhibit steeper gradients and deeper polarity lows over topography than do the level profiles. On the other hand, where draped surfaces are higher than level surfaces, all anomalies are attenuated, so that magnetic‐terrain effects might be reduced relative to subsurface sources (depending upon the magnetization of each). The difference in magnetic behavior between level and draped data can be explained by a contribution of a vertical derivative component in the draped case that is absent in the level case. The contribution is most significant near topographic features because both the observation surface and the topographic surface are changing vertically.

scholarly journals Interpretasi Bawah Permukaan Daerah Penambangan Batuan Andesit Awang Bangkal Kabupaten Banjar Kalimantan Selatan Menggunakan Metode Magnetik

2019 ◽  
Vol 16 (2) ◽  
pp. 117
Author(s):  
Ayi Nurhidayah ◽  
Sri Cahyo Wahyono ◽  
Simon Sadok Siregar
Keyword(s):  
Magnetic Field ◽  
Data Processing ◽  
Geophysical Methods ◽  
Mining Area ◽  
Magnetic Method ◽  
Contour Map ◽  
Total Magnetic Field ◽  
Qualitative And Quantitative ◽  
Qualitative Interpretation ◽  
The Earth

This research has been done in the mining area of andesite rock of Awang Bangkal village by using magnetic method. Magnetic method is one of the most common geophysical methods used for preliminary surveys on petroleum, earth, and mineral rock exploration. It is intended to determine the subsurface distribution in the area by performing qualitative and quantitative interpretations based on the magnetism value of the earth. The result of data processing using geosoft oasis montaj software shows that the total magnetic field anomaly is -807,3 to -361,7 nT. Qualitative interpretation is done by looking at the contour map of the anomaly, the result of upward continuation and the reduction to the poles. While the interpretation is done by making a modeling of the path that has been determined using mag2dc software. The model shows that the rocks that dominate the area are andesite rocks with their susceptibility value of 0.0992 to 0.2305 in SI units.

scholarly journals QUALITATIVE AND QUANTITATIVE INTERPRETATION OF HAND-DIGITIZED AEROMAGNETIC DATA FROM IDAH

2021 ◽  
Vol 5 (10) ◽  
Author(s):  
Robert Bassey Umera ◽  
Odong Peter
Keyword(s):  
Quantitative Interpretation ◽  
Aeromagnetic Data ◽  
Basement Structure ◽  
Qualitative And Quantitative ◽  
Negative Peak ◽  
Maximum Value ◽  
Minimum Depth ◽  
Anomalous Bodies ◽  
Forward And Inverse Modeling ◽  
Peak Value

Qualitative and Quantitative interpretation of hand-digitized aeromagnetic data from Idah has been carried out by applying forward and inverse modeling technique. Qualitatively, wavelength and amplitudes of source bodies reveal lithologic contrast, basement structure and sedimentary magnetization contrast. The maximum depth to top of the magnetic source body obtained is 16.8m and minimum depth is 0.5m. The anomalous bodies’ total magnetic intensity ranges from a minimum negative peak value of -153.5nT to maximum value of 162.7nT. Susceptibility values obtained reveals the presence of rocks such as granite, diabase, olivine-diabase, basalt/gabbro, quartzite and diorite. Results obtained shows that hand-digitized data competes favorably with computer digitized data

Designing a business unit and creating the first ever responsive kitchen

2019 ◽  
Vol 2 (1) ◽  
Author(s):  
Paolo FESTA ◽  
Tommaso CORA ◽  
Lucilla FAZIO
Keyword(s):  
Value Creation ◽  
Product Innovation ◽  
Research Laboratory ◽  
Direct Relationship ◽  
Multidisciplinary Approach ◽  
Design Thinking ◽  
Business Unit ◽  
Qualitative And Quantitative Analysis ◽  
Qualitative And Quantitative ◽  
The Relationship

Is it possible to transform stone into a technological and innovative device? The meeting with one of the main stone transformers in Europe produced the intention of a disruptive operation that could affect the strategy of the whole company. A contagious singularity. By intertwining LEAN methodologies and the human-centric approach of design thinking, we mapped the value creation in the company activating a dialogue with the workers and the management, listening to people, asking for ambitions, discovering problems and the potential of production. This qualitative and quantitative analysis conducted with a multidisciplinary approach by designers, architects and marketing strategists allowed us to define a new method. We used it to design a platform that could let all the players express their potential to the maximum. This is how the group's research laboratory was born, with the aim of promoting the relationship between humans and stone through product innovation. With this goal, we coordinated the new team, developing technologies that would allow creating a more direct relationship between man and surface, making the stone reactive. The result was the first responsive kitchen ever.

FORMALIZED DESCRIPTION OF THE PROCEDURE OF INFORMATION SYSTEM RISK MANAGEMENT

2018 ◽  
pp. 61-70
Author(s):  
Svetlana Sergeevna Kozunova ◽  
Alla Grigorievna Kravets
Keyword(s):  
Information System ◽  
Risk Management ◽  
Negative Consequences ◽  
Management Procedure ◽  
System Risk ◽  
Weak Points ◽  
Formalized Description ◽  
Relationship Of ◽  
The Relationship ◽  
Further Development

The article highlights the aspects of risk management in the information system. According to the analysis of the work of Russian and foreign scientists and world practices in the field of risk management, it is stated that there is a need to improve the effectiveness of risk management of information system and to develop a method for managing the risks of the information system. As a solution to the problem of effective risk management of the information system, there has been proposed a formalized procedure for managing the risks of the information system. The scientific novelty of this solution is the use of decision space and optimization space to reduce risks. This procedure allows to assess the damage, risk and effectiveness of risk management of the information system. The risks of the information system are determined and analyzed; a pyramidal risk diagram is developed. This diagram allows you to describe the relationship of risks with the components of the information system. The negative consequences to which these risks can lead are given. The analysis of methods and approaches to risk management has been carried out. Based on the results of the analysis, the methods GRAMM, CORAS, GOST R ISO / IEC scored to the maximum. The weak points of these methods and the difficulty of applying these methods in practice are described. The developed formalized risk management procedure to control the risks of information system can be used as management system’s element of the information security quality that complies with the recommendations of GOST R ISO / IEC 27003-2012. The prospect of further development of the research results is the development of management systems of risk of information system.

Structural Mediation Model of Information System and Sustainable Performance of UAE Manufacturing Sector

2020 ◽  
Vol 11 (2) ◽  
Author(s):  
Mohamed Ahmed Darwish Abdulla Larii ◽  
◽  
Fatma Ahmed Lari ◽  
Mohamed Ahmed Darwish Abdulla Lari ◽  
◽  
...  
Keyword(s):  
Information System ◽  
Manufacturing Sector ◽  
Organisational Culture ◽  
The Body ◽  
Mediating Effect ◽  
Operational Performance ◽  
Manufacturing Companies ◽  
Mediation Model ◽  
Sustainable Performance ◽  
The Relationship

This study intends to find out the mediating effect of organisational culture on the relationship between information system and sustainable performance of manufacturing sector in UAE. This study used AMOS-SEM software to develop mediation model that linking the mediating relationships between Information System, Organisational Culture and Sustainable operation Performance. Data was collected through questionnaire survey among the operation staff of Abu Dhabi manufacturing companies. A total 250 questionnaires were distributed however 205 were returned and only 200 are valid which indicates a response rate of 80%. The analysis found that TPS has positive but not significant effect to SP; OIS has positive but not significant effect to SP; FMW has a positive and significant effect on SP; SDS has a negative and not significant effect to SP and SP has positive but not significant effect OC. For the path relationship between the four exogenous variables (TPS, OIS, SDS, and FMW) and the mediator variable (OC), the results are TPS has positive and significant effect to OC; OIS has positive but not significant effect to OC; FMW has positive and significant effect to OC and SDS has positive and not significant effect to OC. Collectively, the five exogenous constructs (TPS, OIS, SDS, FMW and OC) explained 89% variation in operational performance and 86% of the variation in organisational culture. However, for a mediator, it was found that OC has no significant mediating effect on the relationship between TPS and SP; OC has no significant mediating effect on the relationship between OIS and SP; OC has no significant mediating effect on the relationship between SDS and SP and OC has no significant mediating effect on the relationship between FMW and SP. it can be concluded that there is a positive relationship between information system dimensions and operational performance. However organizational culture has no contributing any mediating effect to the relationship. These findings have contributed to the body of knowledge and could be shared among the UAE manufacturing practitioners.

scholarly journals Effects of Magnetic Anisotropy on Total Magnetic Field Anomalies

2017 ◽  
Vol 122 (11) ◽  
pp. 8628-8644 ◽  
Author(s):  
Andrea R. Biedermann ◽  
Suzanne A. McEnroe
Keyword(s):  
Magnetic Field ◽  
Magnetic Anisotropy ◽  
Total Magnetic Field

scholarly journals Monitoring Mechanisms, Gender, and Information System Structure in Nigerian Non-Financial Listed Companies

2016 ◽  
Vol 11 (5) ◽  
pp. 129 ◽  
Author(s):  
Oluyemisi Rachael Arowolo ◽  
Ayoib Che-Ahmad
Keyword(s):  
Information System ◽  
Listed Companies ◽  
System Structure ◽  
Annual Reports ◽  
Internal Auditing ◽  
Minority Shareholders ◽  
Organizational Attributes ◽  
The Board Of Directors ◽  
Sub Saharan ◽  
The Relationship

Monitoring mechanisms are tools for companies to protect the interests of the shareholders, most especially, the minority shareholders from the deviant behaviour of the management and board members. This study examines the relationship between monitoring mechanisms (directorship, internal and external auditing), gender and information system structure in Nigerian non-financial listed companies. The empirical tests for the study are by quantitative analysis approach with data from annual reports and questionnaires (for information system structure and internal auditing not obtainable from annual reports). The findings reveal that both gender and information system structure significantly relates to monitoring mechanisms (directorship, internal auditing and external auditing). This empirical study adds to the literature on the antecedents of organizational attributes in respect of gender and information system structure as related to monitoring mechanisms, particularly in Sub-Saharan African. Likewise, the findings suggest policy implication for the board of directors regarding appropriate board composition and structuring of the information system of a company to mitigate agency problems.

Sign in / Sign up

Export Citation Format

Share Document