scholarly journals Application of life cycle assessment (LCA) methodology and economic evaluation for construction and demolition waste: a Colombian case study

2021 ◽  
Vol 25 (3) ◽  
pp. 341-351
Author(s):  
Sindy Sofía Suárez Silgado ◽  
Lucrecia Janneth Calderon Valdiviezo ◽  
Leandro Fernando Mahecha Vanegas
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Impacts ◽  
Raw Materials ◽  
Construction And Demolition Waste ◽  
Lca Methodology ◽  
Environmental Implications ◽  
Demolition Waste ◽  
Secondary Sources ◽  
Management Processes

The construction industry consumes more raw materials and energy than any other economic activity and generates the largest fraction of waste, known as construction and demolition waste (CDW). This waste has significant environmental implications, most notably in South American countries such as Colombia, where it is handled inappropriately. This study evaluated the management processes currently used for fractions of construction and demolition waste generated in Ibagué (Colombia). The environmental impacts of the management of 1 kg of CDW were also calculated. Other CDW management alternatives were evaluated. The percentage of the fraction of the waste and the treatment or management processes used were modified to determine its environmental and economic viability. The information was obtained through telephone interviews and visits to recycling plants, construction companies, quarries, government entities, and inert landfills. It was completed with secondary sources and the Ecoinvent v.2.2 databases. Life Cycle Assessment (LCA) methodology and the SimaPro 8 software were used to calculate the environmental impacts. An economic study of each management process and each alternative was also carried out. A comparison of the other options revealed the current choice contributes most to the environmental impacts in all categories. This study indicates that the most beneficial alternative in environmental and economic terms in Ibagué (Colombia) is where 100% of the metals are recovered, 100% of excavated earth is reused, and 100% of the stone waste is recycled (alternative 3). This alternative remained the most favorable when a sensitivity analysis was carried out with different distances (30 km and 50 km).

scholarly journals From Buildings’ End of Life to Aggregate Recycling under a Circular Economic Perspective: A Comparative Life Cycle Assessment Case Study

2021 ◽  
Vol 13 (17) ◽  
pp. 9625
Author(s):  
Ambroise Lachat ◽  
Konstantinos Mantalovas ◽  
Tiffany Desbois ◽  
Oumaya Yazoghli-Marzouk ◽  
Anne-Sophie Colas ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
End Of Life ◽  
Environmental Impacts ◽  
Open Loop ◽  
Decision Makers ◽  
Construction And Demolition Waste ◽  
Recycled Aggregates ◽  
Demolition Waste

The demolition of buildings, apart from being energy intensive and disruptive, inevitably produces construction and demolition waste (C&Dw). Unfortunately, even today, the majority of this waste ends up underexploited and not considered as valuable resources to be re-circulated into a closed/open loop process under the umbrella of circular economy (CE). Considering the amount of virgin aggregates needed in civil engineering applications, C&Dw can act as sustainable catalyst towards the preservation of natural resources and the shift towards a CE. This study completes current research by presenting a life cycle inventory compilation and life cycle assessment case study of two buildings in France. The quantification of the end-of-life environmental impacts of the two buildings and subsequently the environmental impacts of recycled aggregates production from C&Dw was realized using the framework of life cycle assessment (LCA). The results indicate that the transport of waste, its treatment, and especially asbestos’ treatment are the most impactful phases. For example, in the case study of the first building, transport and treatment of waste reached 35% of the total impact for global warming. Careful, proactive, and strategic treatment, geolocation, and transport planning is recommended for the involved stakeholders and decision makers in order to ensure minimal sustainability implications during the implementation of CE approaches for C&Dw.

scholarly journals 2-Piece Cork Stoppers as Alternative for Valorization of Thin Cork Planks: Analysis by LCA Methodology

Foods ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 873
Author(s):  
Francisco Javier Flor-Montalvo ◽  
Agustín Sánchez-Toledo Ledesma ◽  
Eduardo Martínez Cámara ◽  
Emilio Jiménez-Macías ◽  
Jorge Luis García-Alcaraz ◽  
...  
Keyword(s):  
Life Cycle Assessment ◽  
Life Cycle ◽  
Raw Materials ◽  
Lca Methodology ◽  
Significant Difference ◽  
Different Dimensions ◽  
The Impact ◽  
Different Thickness ◽  
Cork Stoppers ◽  
Wine Bottle

Natural stoppers are a magnificent closure for the production of aging wines and unique wines, whose application is limited by the availability of raw materials and more specifically of cork sheets of different thickness and quality. The growing demand for quality wine bottle closures leads to the search for alternative stopper production. The two-piece stopper is an alternative since it uses non-usable plates in a conventional way for the production of quality caps. The present study has analyzed the impact of the manufacture of these two-piece stoppers using different methodologies and for different dimensions by developing an LCA (Life Cycle Assessment), concluding that the process phases of the plate, its boiling, and its stabilization, are the phases with the greatest impact. Likewise, it is detected that the impacts in all phases are relatively similar (for one kg of net cork produced), although the volumetric difference between these stoppers represents a significant difference in impacts for each unit produced.

scholarly journals 3 Tackling Demolition Waste – An en route to Sustainable Development

2018 ◽  
Vol 8 (1) ◽  
pp. 8
Author(s):  
Nadia Qamar ◽  
Ayesha Alam Khurram
Keyword(s):  
Sustainable Development ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Conditions ◽  
Material Flow ◽  
Flow Analysis ◽  
Material Flow Analysis ◽  
Construction And Demolition Waste ◽  
Water Tank ◽  
Demolition Waste

In Pakistan, construction and demolition waste(CDW) is generated in voluminous amount each year. CDW iswidely ill-handled and ultimately fed to landfills causing harm tothe already alarming environmental conditions. In order tosearch for the solution of this drastic matter, a study was done,which is explained in this paper. This paper presents the studydone at a demolition site near Karachi, in Sindh while thedemolition works were being carried out. At the site there wereold barracks which were being demolished. Before the demolitionworks were commenced, the site was surveyed and structuralcomponents of the barracks were counted and their dimensionswere measured. When the demolition was over, the demolishedwaste was calculated which comprised of concrete and masonryrubble, steel round bars, steel doors, steel windows, steel ceiling,steel girders, steel main gate, and plastic water tank. This studyinterpreted that construction and demolition (C&D) works wereprogressing considering the works’ deadline and the clients’requirements but the ecosystem’s ecology and the environmentalhealth were not taken into account. Recommendations are madeto handle CDW properly throughout its lifecycle. Theserecommendations aim to provide technological and logicalsolutions to grip CDW. The recommendations include wastereduction and reusing waste, life cycle assessment and costing,environmental and economic impact, material flow analysis, andadvanced computerized-tools.

Sustainability assessment of gas based power generation using a life cycle assessment approach

2018 ◽  
Vol 29 (5) ◽  
pp. 826-841 ◽  
Author(s):  
Binita Shah ◽  
Seema Unnikrishnan
Keyword(s):  
Power Generation ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Power Plant ◽  
Natural Gas ◽  
Environmental Impacts ◽  
Electricity Generation ◽  
Lca Methodology ◽  
Iso 14040 ◽  
Content Type

Purpose India is a developing economy along with an increasing population estimated to be the largest populated country in about seven years. Simultaneously, its power consumption is projected to increase more than double by 2020. Currently, the dependence on coal is relatively high, making it the largest global greenhouse gas emitting sector which is a matter of great concern. The purpose of this paper is to evaluate the environmental impacts of the natural gas electricity generation in India and propose a model using a life cycle assessment (LCA) approach. Design/methodology/approach LCA is used as a tool to evaluate the environmental impact of the natural gas combined cycle (NGCC) power plant, as it adopts a holistic approach towards the whole process. The LCA methodology used in this study follows the ISO 14040 and 14044 standards (ISO 14040: 2009; ISO 14044: 2009). A questionnaire was designed for data collection and validated by expert review primary data for the annual environmental emission was collected by personally visiting the power plant. The study follows a cradle to gate assessment using the CML (2001) methodology. Findings The analysis reveals that the main impacts were during the process of combustion. The Global warming potential is approximately 0.50 kg CO2 equivalents per kWh of electricity generation from this gas-based power plant. These results can be used by stakeholders, experts and members who are authorised to probe positive initiative for the reduction of environmental impacts from the power generation sector. Practical implications Considering the pace of growth of economic development of India, it is the need of the hour to emphasise on the patterns of sustainable energy generation which is an important subject to be addressed considering India’s ratification to the Paris Climate Change Agreement. This paper analyzes the environmental impacts of gas-based electricity generation. Originality/value Presenting this case study is an opportunity to get a glimpse of the challenges associated with gas-based electricity generation in India. It gives a direction and helps us to better understand the right spot which require efforts for the improvement of sustainable energy generation processes, by taking appropriate measures for emission reduction. This paper also proposes a model for gas-based electricity generation in India. It has been developed following an LCA approach. As far as we aware, this is the first study which proposes an LCA model for gas-based electricity generation in India. The model is developed in line with the LCA methodology and focusses on the impact categories specific for gas-based electricity generation.

scholarly journals 3 Tackling Demolition Waste – An en route to Sustainable Development

2018 ◽  
Vol 1 (1) ◽  
pp. 8
Author(s):  
Nadia Qamar ◽  
Ayesha Alam Khurram
Keyword(s):  
Sustainable Development ◽  
Life Cycle Assessment ◽  
Life Cycle ◽  
Environmental Conditions ◽  
Material Flow ◽  
Flow Analysis ◽  
Material Flow Analysis ◽  
Construction And Demolition Waste ◽  
Water Tank ◽  
Demolition Waste

In Pakistan, construction and demolition waste(CDW) is generated in voluminous amount each year. CDW iswidely ill-handled and ultimately fed to landfills causing harm tothe already alarming environmental conditions. In order tosearch for the solution of this drastic matter, a study was done,which is explained in this paper. This paper presents the studydone at a demolition site near Karachi, in Sindh while thedemolition works were being carried out. At the site there wereold barracks which were being demolished. Before the demolitionworks were commenced, the site was surveyed and structuralcomponents of the barracks were counted and their dimensionswere measured. When the demolition was over, the demolishedwaste was calculated which comprised of concrete and masonryrubble, steel round bars, steel doors, steel windows, steel ceiling,steel girders, steel main gate, and plastic water tank. This studyinterpreted that construction and demolition (C&D) works wereprogressing considering the works’ deadline and the clients’requirements but the ecosystem’s ecology and the environmentalhealth were not taken into account. Recommendations are madeto handle CDW properly throughout its lifecycle. Theserecommendations aim to provide technological and logicalsolutions to grip CDW. The recommendations include wastereduction and reusing waste, life cycle assessment and costing,environmental and economic impact, material flow analysis, andadvanced computerized-tools.

Sign in / Sign up

Export Citation Format

Share Document