Preparation and phase control of nanocrystalline silver indium sulfides via a hydrothermal route

2001 ◽  
Vol 16 (12) ◽  
pp. 3411-3415 ◽  
Author(s):  
J. Q. Hu ◽  
B. Deng ◽  
K. B. Tang ◽  
C. R. Wang ◽  
Y. T. Qian
Keyword(s):  
Room Temperature ◽  
Photoelectron Spectra ◽  
Hydrothermal Route ◽  
X Ray ◽  
Transmission Electron ◽  
Diffraction Patterns ◽  
And Control ◽  
Microscopy Images ◽  
Room Temperature Raman Spectrum ◽  
Weak Peak

A hydrothermal route was proposed to prepare and control nanocrystalline silver indium sulfides (orthorhombic AgInS2, tetragonal AgInS2, and cubic AgIn5S8). The reaction was carried out in an autoclave in the temperature range of 100–280 °C with AgCl, InCl3, and thiourea as reactants. X-ray powder diffraction patterns and transmission electron microscopy images showed that the products were AgInS2 and AgIn5S8 phases and well crystallized with grain diameter in the range of 20–70 nm. X-ray photoelectron spectra of the single AgIn5S8 phase revealed the surface stoichiometry (AgIn5.05S8.11), and its room temperature Raman spectrum showed a strong peak at 130 cm−1 and a weak peak at around 290 cm−1. The influence of reaction temperature on the phases in the final products was investigated. A possible reaction mechanism of the formation of silver indium sulfides was also briefly discussed.

Modification of Ge2Sb2Te5 by the Addition of SiOx for Improved Operation of Phase Change Random Access Memory

2005 ◽  
Vol 888 ◽  
Author(s):  
Jin-Seo Noh ◽  
Dong-Seok Suh ◽  
Sang Mock Lee ◽  
Kijoon H. P. Kim ◽  
Woong-Chul Shin ◽  
...  
Keyword(s):  
Room Temperature ◽  
Random Access ◽  
X Ray Diffraction ◽  
Access Memory ◽  
X Ray ◽  
Transmission Electron ◽  
Diffraction Patterns ◽  
Critical Requirement ◽  
Current Reduction ◽  
Microscopy Images

ABSTRACTConventional Ge2Sb2Te5 (GST) was modified by adding up a small amount of SiOx, using co-sputtering technique from multiple targets. The SiOx content was gradually increased by increasing the power applied to SiOx target, up to 8 volume percent. The sheet resistance of SiOx-containing GST exponentially increased, when the room-temperature-deposited samples were annealed at 300 °C. Transmission electron microscopy images revealed that no SiOx particulates were formed, which was confirmed by Gattan image filtering. It was indicated by x-ray diffraction patterns that the grain size of SiOx-containing GST is smaller than normal GST with lattice locally distorted at its crystalline state, suggesting that molecular SiOx is homogeneously distributed throughout the GST matrix. We observed that the crystallization temperature of SiOx-containing GST is gradually elevated by increasing the SiOx content, while the melting point decreased. These observations led to the reset current reduction, which is a critical requirement for the high density PRAM.

Facile Refluxing Synthesis of Hydroxyapatite Nanoparticles

2015 ◽  
Vol 68 (8) ◽  
pp. 1293 ◽  
Author(s):  
Pakvipar Chaopanich ◽  
Punnama Siriphannon
Keyword(s):  
Crystallite Size ◽  
Reaction Times ◽  
Single Step ◽  
Hydroxyapatite Nanoparticles ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Aqueous Mixture ◽  
Diffraction Patterns ◽  
Microscopy Images

Hydroxyapatite (HAp) nanoparticles were successfully synthesized from an aqueous mixture of Ca(NO3)2·4H2O and (NH4)2HPO4 by a facile single-step refluxing method using polystyrene sulfonate (PSS) as a template. The effects of reaction times, pH, and PSS concentration on the HAp formation were investigated. It was found that the crystalline HAp was obtained under all conditions after refluxing the precursors for 3 and 6 h. The longer refluxing time, the greater the crystallinity and the larger the crystallite size of the HAp nanoparticles. The HAp with poor crystallinity was obtained at pH 8.5; however, the well-crystallized HAp was obtained when reaction pH was increased to 9.5 and 10.5. In addition, the X-ray diffraction patterns revealed that the presence of PSS template caused the reduction of HAp crystallite size along the (002) plane from 52.6 nm of non-template HAp to 43.4 nm and 41.4 nm of HAp with 0.05 and 0.2 wt-% PSS template, respectively. Transmission electron microscopy images of the synthesized HAp revealed the rod-shaped crystals of all samples. The synthesized HAp nanoparticles were modified by l-aspartic acid (Asp) and l-arginine (Arg), having negative and positive charges, respectively. It was found that the zeta potential of HAp was significantly changed from +5.46 to –24.70 mV after modification with Asp, whereas it was +4.72 mV in the Arg-modified HAp. These results suggested that the negatively charged amino acid was preferentially adsorbed onto the synthesized HAp surface.

A Chemical Solution Route to Rapid Synthesis of Homogeneous Bi100−xSbx Alloys Nanoparticles at Room Temperature

2007 ◽  
Vol 7 (2) ◽  
pp. 525-529 ◽  
Author(s):  
Bo Zhou ◽  
Jun-Jie Zhu
Keyword(s):  
Room Temperature ◽  
Raw Materials ◽  
X Ray Diffraction ◽  
X Ray ◽  
Selected Area Electron Diffraction ◽  
Transmission Electron ◽  
Solution Route ◽  
Diffraction Patterns ◽  
Co Reduction ◽  
Chemical Solution Route

A chemical co-reduction route in aqueous solution was developed to synthesize Bi100−xSbx alloys at room temperature. The hydrolyses of Bi(III) and Sb(III) were effectively avoided by selecting proper raw materials and coordinator. X-ray diffraction analysis indicated that the as-prepared Bi100−xSbx alloys were homogeneous and phase-pure, and the Bi/Sb ratios in the alloys were very close to those in the aqueous solutions. The transmission electron microscope observation showed that the as-prepared Bi100−xSbx (x = 0∼100) alloys were particles with a size of tens of nanometers. The selected area electron diffraction patterns confirmed the high crystallinity, the homogeneousness, and the composition controllability of as-prepared alloys. All these characters and the nanometer-scaled size of the alloys are believed to be beneficial to the thermoelectric property of the Bi100−xSbx alloys.

Solvothermal route to Bi3Se4 nanorods at low temperature

2001 ◽  
Vol 16 (12) ◽  
pp. 3361-3365 ◽  
Author(s):  
Yuan-fang Liu ◽  
Jing-hui Zeng ◽  
Wei-xin Zhang ◽  
Wei-chao Yu ◽  
Yi-tai Qian ◽  
...  
Keyword(s):  
Electron Microscope ◽  
Reaction Mechanism ◽  
Low Temperature ◽  
Hydrazine Hydrate ◽  
Photoelectron Spectra ◽  
Elemental Selenium ◽  
X Ray ◽  
Transmission Electron ◽  
Microscope Images ◽  
Diffraction Patterns

Nanorods Bi3Se4 were synthesized directly through the reaction between BiCl3 and elemental selenium in an autoclave with hydrazine hydrate as solvent at 165 °C for 10 h. X-ray powder diffraction patterns, x-ray photoelectron spectra, and transmission electron microscope images show that the products are well-crystallized hexagonal Bi3Se4 nanorods. The solvent hydrazine hydrate played an important role in formation and growth of Bi3Se4 nanorods. The possible reaction mechanism was proposed.

The Effect of Al on Phase Stability and Oxidation Behavior in Ternary Nb-Ti-Si Alloys

2014 ◽  
Vol 556-562 ◽  
pp. 310-313
Author(s):  
Yong Jun Jiang
Keyword(s):  
Room Temperature ◽  
Oxidation Behavior ◽  
Point Of View ◽  
Transition Elements ◽  
X Ray Diffraction ◽  
X Ray ◽  
Room Temperature Ductility ◽  
Oxidation Properties ◽  
Diffraction Patterns ◽  
And Control

In this paper, we report a significant improvement in mechanical and oxidation properties of near eutectic Nb–Si alloys by the addition of aluminum (Al) and control of microstructural length scale. Thus in order to develop new alloys, we have to choose proper alloying elements keeping all the above issues in mind. Among the non-transition elements such as Al, Ga, Ge, Sn, and Al is most attractive from the point of view of enhancing the oxidation resistance and room temperature ductility due to substitution of Si with metallic Al . Al forms oxides which are even more thermodynamically stable than Si and Nb based oxides. Al is also soluble in Nb to a greater degree in conjunction with other refractory elementsFig.1 The figure shows composite X-ray diffraction patterns of each sample exposed to air for one hour in a TGA furnace at above mention temperatures.

Chemistry, morphology and structural characteristics of synthetic Al-lizardite

Clay Minerals ◽  
2010 ◽  
Vol 45 (2) ◽  
pp. 131-143 ◽  
Author(s):  
M. Bentabol ◽  
M. D. Ruiz Cruz ◽  
I. Sobrados
Keyword(s):  
Structural Characteristics ◽  
X Ray Diffraction ◽  
Hydrothermal Conditions ◽  
Single Population ◽  
X Ray ◽  
Cell Parameters ◽  
Transmission Electron ◽  
Diffraction Patterns ◽  
Microscopy Images ◽  
Stacking Disorder

AbstractAl-lizardite has been synthesized under hydrothermal conditions (200ºC). Morphologically, Al-lizardite consists of thin platy particles ~400 Å wide and ~150 Å thick. Structurally, the X-ray diffraction patterns indicate that the 2H2 polytype is dominant, with cell parameters: a = 5.311(0.006) Å; c = 14.333 (0.013) Å and space group P63. High-resolution transmission electron microscopy images revealed, however, the presence of other polytypes and abundant stacking disorder. Chemically, Al-lizardite consists of a single population with average tetrahedral composition Si1.74Al0.26. In contrast to previously described Al-rich serpentines (amesite and Al-lizardite), this Al-lizardite is characterized by an asymmetrical Al distribution, with VIAl ≈0.70 and IVAl ≈0.25 atoms per formula unit.

Photoluminescence Enhancement of CdS Nanocrystals Fabricated on Dithiocarbamate Functionalized PET Substrates

2012 ◽  
Vol 512-515 ◽  
pp. 1511-1515
Author(s):  
Chun Lin Zhao ◽  
Li Xing ◽  
Xiao Hong Liang ◽  
Jun Hui Xiang ◽  
Fu Shi Zhang ◽  
...  
Keyword(s):  
Room Temperature ◽  
Hexagonal Structure ◽  
Diffraction Measurement ◽  
X Ray Diffraction ◽  
Visible Absorption ◽  
X Ray ◽  
Cds Nanocrystals ◽  
Morphological Studies ◽  
Transmission Electron

Cadmium sulfide (CdS) nanocrystals (NCs) were self-assembled and in-situ immobilized on the dithiocarbamate (DTCs)-functionalized polyethylene glycol terephthalate (PET) substrates between the organic (carbon disulfide diffused in n-hexane) –aqueous (ethylenediamine and Cd2+ dissolved in water) interface at room temperature. Powder X-ray diffraction measurement revealed the hexagonal structure of CdS nanocrystals. Morphological studies performed by scanning electron microscopy (SEM) and high-resolution transmission electron microscope (HRTEM) showed the island-like structure of CdS nanocrystals on PET substrates, as well as energy-dispersive X-ray spectroscopy (EDS) confirmed the stoichiometries of CdS nanocrystals. The optical properties of DTCs modified CdS nanocrystals were thoroughly investigated by ultraviolet-visible absorption spectroscopy (UV-vis) and fluorescence spectroscopy. The as-prepared DTCs present intrinsic hydrophobicity and strong affinity for CdS nanocrystals.

scholarly journals Facile Organometallic Synthesis of Fe-Based Nanomaterials by Hot Injection Reaction

Nanomaterials ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1141
Author(s):  
Georgia Basina ◽  
Hafsa Khurshid ◽  
Nikolaos Tzitzios ◽  
George Hadjipanayis ◽  
Vasileios Tzitzios
Keyword(s):  
Room Temperature ◽  
Colloidal Particles ◽  
Iron Pentacarbonyl ◽  
Vibrating Sample Magnetometer ◽  
X Ray Diffraction ◽  
Organometallic Synthesis ◽  
X Ray ◽  
Transmission Electron ◽  
Hot Injection ◽  
The Stability

Fe-based colloids with a core/shell structure consisting of metallic iron and iron oxide were synthesized by a facile hot injection reaction of iron pentacarbonyl in a multi-surfactant mixture. The size of the colloidal particles was affected by the reaction temperature and the results demonstrated that their stability against complete oxidation related to their size. The crystal structure and the morphology were identified by powder X-ray diffraction and transmission electron microscopy, while the magnetic properties were studied at room temperature with a vibrating sample magnetometer. The injection temperature plays a very crucial role and higher temperatures enhance the stability and the resistance against oxidation. For the case of injection at 315 °C, the nanoparticles had around a 10 nm mean diameter and revealed 132 emu/g. Remarkably, a stable dispersion was created due to the colloids’ surface functionalization in a nonpolar solvent.

Physical and Mechanical Properties of Cement Paste Were Used Partially with Fly Ash and Kaolin Waste

2017 ◽  
Vol 866 ◽  
pp. 199-203
Author(s):  
Chidchanok Chainej ◽  
Suparut Narksitipan ◽  
Nittaya Jaitanong
Keyword(s):  
Mechanical Properties ◽  
Fly Ash ◽  
Room Temperature ◽  
Physical And Mechanical Properties ◽  
Partial Replacement ◽  
X Ray Diffraction ◽  
X Ray ◽  
Lime Water ◽  
Diffraction Patterns ◽  
Iron Mold

The aims of this research were study the microstructures and mechanical properties for partial replacement of cement with Fly ash (FA) and kaolin waste (KW). Ordinary Portland cement were partially replaced with FA and KW in the range of 25-35% and 10-25% by weight of cement powder. The kaolin waste was ground for 180 minutes before using. The specimen was packing into an iron mold which sample size of 5×5×5 cm3. Then, the specimens were kept at room temperature for 24 hours and were moist cured in the incubation lime water bath at age of 3 days. After that the specimens were dry cured with plastic wrap at age of 3, 7, 14 and 28 days. After that the compounds were examined by x-ray diffraction patterns (XRD) and the microstructures were examined by scanning electron microscopy (SEM). The compressive strength was then investigated.

X-Ray Diffraction Study of Hep Metals. I. Line Broadening in Polycrystalline Cd Powder

1974 ◽  
Vol 29 (12) ◽  
pp. 1771-1777 ◽  
Author(s):  
N. C. Haider ◽  
S. H. Hunter
Keyword(s):  
Room Temperature ◽  
Small Deformation ◽  
Correction Factors ◽  
Line Broadening ◽  
X Ray Diffraction ◽  
Fault Probability ◽  
Large Particle Size ◽  
X Ray ◽  
Melting Temperatures ◽  
Diffraction Patterns

Powder Cd of 99.999% purity was prepared at room temperature (25 °C) and x-ray diffraction patterns were obtained using CuKaα radiation with Ni-filter. The line broadening was analyzed after incorporating the appropriate correction factors. At room temperature Cd was found to have large particle size (653 A), small root mean square strain (.001), small deformation fault probability a (.003). and negligible growth fault probability β(0). Compared to other hep metals which have been studied earlier and which have higher melting temperatures, metal Cd is much less affected by mechanical deformation at room temperature.

Sign in / Sign up

Export Citation Format

Share Document