Time-resolved studies of the order–disorder phase transformations in rare-earth–transition metal intermetallics with 2-17 stoichiometry

2008 ◽  
Vol 23 (11) ◽  
pp. 2886-2896 ◽  
Author(s):  
Y.Y. Kostogorova-Beller ◽  
M.J. Kramer ◽  
J.E. Shield
Keyword(s):  
Rare Earth ◽  
Phase Transformations ◽  
Rietveld Method ◽  
National Laboratory ◽  
Argonne National Laboratory ◽  
High Energy ◽  
Lattice Parameters ◽  
X Rays ◽  
Time Resolved ◽  
Alloying Additions

High-temperature order–disorder transformations in R2T17 and R2T17-M-C intermetallics with R = Pr, Sm, Dy, Tb; T = Co, Fe; and M = Zr, Nb were studied utilizing time-resolved synchrotron x-ray diffraction at the Advanced Photon Source (APS) at the U.S. Department of Energy’s Argonne National Laboratory (Argonne, IL). High-energy synchrotron radiation provides intense, highly penetrating x-rays, which are ideal for in situ studies of phase transformations. Alloying additions are used to stabilize formation of metastable phases; their influence on order recovery was investigated. The experimental setup utilized Debye–Scherrer geometry; specimens were heated at a rate of 10 K/min. Full-profile diffraction patterns collected every 10 s were refined in sequence using the Rietveld method to track changes of lattice parameters and phase assemblages during heating. Sharp changes observed in the evolution of temperature-dependent lattice parameters suggested formation of ordered structure via nucleation and growth. Both 2-17 polymorphs co-existed in light and heavy rare-earth systems at high temperatures. The presence of alloying additions in the solid solution greatly influenced long-range order formation.

scholarly journals High-Speed Flow Visualization of a Canonical Airblast Atomizer Using Synchrotron X-Rays

2019 ◽  
Author(s):  
Theodore J. Heindel ◽  
Timothy B. Morgan ◽  
Thomas J. Burtnett ◽  
Julie K. Bothell ◽  
Danyu Li ◽  
...  
Keyword(s):  
High Speed ◽  
Near Field ◽  
National Laboratory ◽  
Bubble Formation ◽  
Liquid Core ◽  
Argonne National Laboratory ◽  
Operating Conditions ◽  
X Rays ◽  
Time Resolved ◽  
Spray Formation

Abstract Liquid sprays play a key role in many engineering processes and the dynamics at the nozzle exit have a significant impact on the downstream spray characteristics. However, visualizing the spray in this region is extremely challenging because, under most operating conditions, the spray is optically dense. High intensity white beam X-rays, like those found at the Advanced Photon Source (APS) at Argonne National Laboratory, can be used to produce time-resolved measurements of the liquid-gas structures in the spray near-field region. In this study, high temporal and spatial resolution X-ray images were acquired at the 7-BM beamline at APS of an atomization process using a canonical airblast atomizer consisting of coaxial liquid and gas jets. Unique flow structures were observed under various operating conditions, including bag, ligament, wisp, droplet, and air bubble formation, as well as hollowing of the liquid core into a crown at the liquid needle exit. Conditions where these structures exist are presented and their impact on spray formation are discussed.

scholarly journals Phase Transformations In Nickel-Aluminum Alloys During Ion Beam Mixing

1985 ◽  
Vol 51 ◽  
Author(s):  
James Eridon ◽  
Lynn Rehn ◽  
Gary Was
Keyword(s):  
Aluminum Alloys ◽  
Phase Transformations ◽  
Ion Beam ◽  
National Laboratory ◽  
Argonne National Laboratory ◽  
Amorphous Structure ◽  
X Rays ◽  
Nickel Aluminum ◽  
Ion Beam Mixing ◽  
Voltage Electron

ABSTRACTThe effect of ion beam mixing of nickel-aluminum alloys with 500 keV krypton ions has been investigated over a range of temperature, composition, ion dose, and post-irradiation thermal treatments. Samples were formed by aternate evaporation of layers of aluminum and nickel. A portion of these samples was subsequently annealed to form intermetallic compunds. Irradiations were performed at both room temperature and 80 K using the 2 MV ion accelerator at Argonne National Laboratory. Phase transformations were observed during both in situ irradiations in the High Voltage Electron Microscope(HVEM) at Argonne and also in subsequent analysis of an array of irradiated samples. Electron diffraction indicates the presence of metastable crystalline structures not present in the conventional nickel-aluminum phase diagram. Transformations occur at doses as low as 5×1014 cm−2 and continue to develop as the irradiation progresses up to 2×l016 cm−2. Layer mixing is followed through Rutherford Backscattering analysis. Samples are also checked with x-rays and Electron Energy Loss Spectroscopy (EELS). A thermodynamic argument is presented to explain the phase transformations in terms of movements on a free energy diagram. This analysis explains the interesting paradox concerning the radiation hardness of the NiAl[l] phase and the amorphous structure of mixed Ni-50% Al layers[2].

Electron and ion irradiation-induced dissolution of mechanical twins in the intermetalic U3Si: An in situ HVEM study

1989 ◽  
Vol 47 ◽  
pp. 652-653
Author(s):  
Charles W. Allen ◽  
Robert C. Birtcher
Keyword(s):  
Elevated Temperatures ◽  
Ion Irradiation ◽  
Ion Beam ◽  
National Laboratory ◽  
Argonne National Laboratory ◽  
Heavy Ion ◽  
High Energy ◽  
Mechanical Twinning ◽  
In Situ Experiments

The uranium silicides, including U3Si, are under study as candidate low enrichment nuclear fuels. Ion beam simulations of the in-reactor behavior of such materials are performed because a similar damage structure can be produced in hours by energetic heavy ions which requires years in actual reactor tests. This contribution treats one aspect of the microstructural behavior of U3Si under high energy electron irradiation and low dose energetic heavy ion irradiation and is based on in situ experiments, performed at the HVEM-Tandem User Facility at Argonne National Laboratory. This Facility interfaces a 2 MV Tandem ion accelerator and a 0.6 MV ion implanter to a 1.2 MeV AEI high voltage electron microscope, which allows a wide variety of in situ ion beam experiments to be performed with simultaneous irradiation and electron microscopy or diffraction.At elevated temperatures, U3Si exhibits the ordered AuCu3 structure. On cooling below 1058 K, the intermetallic transforms, evidently martensitically, to a body-centered tetragonal structure (alternatively, the structure may be described as face-centered tetragonal, which would be fcc except for a 1 pet tetragonal distortion). Mechanical twinning accompanies the transformation; however, diferences between electron diffraction patterns from twinned and non-twinned martensite plates could not be distinguished.

Detector commissioning and development for PETRA-III

2010 ◽  
Vol 1 (SRMS-7) ◽  
Author(s):  
David Pennicard ◽  
Heinz Graafsma ◽  
Michael Lohmann
Keyword(s):  
High Speed ◽  
Materials Science ◽  
Dynamic Range ◽  
Photon Counting ◽  
High Energy ◽  
X Rays ◽  
Silicon Detectors ◽  
Time Resolved ◽  
Wide Range ◽  
Synchrotron Light

The new synchrotron light source PETRA-III produced its first beam last year. The extremely high brilliance of PETRA-III and the large energy range of many of its beamlines make it useful for a wide range of experiments, particularly in materials science. The detectors at PETRA-III will need to meet several requirements, such as operation across a wide dynamic range, high-speed readout and good quantum efficiency even at high photon energies. PETRA-III beamlines with lower photon energies will typically be equipped with photon-counting silicon detectors for two-dimensional detection and silicon drift detectors for spectroscopy and higher-energy beamlines will use scintillators coupled to cameras or photomultiplier tubes. Longer-term developments include ‘high-Z’ semiconductors for detecting high-energy X-rays, photon-counting readout chips with smaller pixels and higher frame rates and pixellated avalanche photodiodes for time-resolved experiments.

First X-Ray Microprobe and Microspectroscopy Results From The Gsecars Sector At The Advanced Photon Source

1997 ◽  
Vol 3 (S2) ◽  
pp. 905-906
Author(s):  
Mark L. Rivers ◽  
Stephen R. Sutton ◽  
Peter Eng ◽  
Matthew Newville
Keyword(s):  
National Laboratory ◽  
Argonne National Laboratory ◽  
Third Generation ◽  
X Rays ◽  
Environmental Sciences ◽  
X Ray ◽  
State Determination ◽  
X Ray Absorption ◽  
The Magnetic Field ◽  
Photon Source

The Advanced Photon Source (APS) at Argonne National Laboratory is a third-generation synchrotron x-ray source, optimized for producing x-rays from undulators. Such undulator sources provide extremely bright, quasi-monochromatic radiation which is ideal for an x-ray microprobe. Such microprobes can be used for trace element quantification with x-ray fluorescence, or for chemical state determination with x-ray absorption spectroscopy. The GeoSoilEnviroCARS (GSECARS) sector at the APS is building an x-ray microprobe for research in earth, planetary, soil and environmental sciences.The GSECARS undulator source is a standard APS Undulator “A” which is a 3.3 cm period device with 72 periods. The energies of the undulator peaks can be varied by adjusting the gap, and hence the magnetic field of the undulator. The energy of the first harmonic can be varied in this way from approximately 3.1 keV to 14 keV. A measured undulator spectrum is shown in Figure 1.

Flash Proton Radiography

2015 ◽  
Vol 08 ◽  
pp. 165-180 ◽  
Author(s):  
Frank E. Merrill
Keyword(s):  
Temporal Structure ◽  
National Laboratory ◽  
High Energy ◽  
Full Potential ◽  
X Rays ◽  
Alamos National Laboratory ◽  
Proton Radiography ◽  
Los Alamos ◽  
Los Alamos National Laboratory ◽  
Wide Range

Protons were first investigated as radiographic probes as high energy proton accelerators became accessible to the scientific community in the 1960s. Like the initial use of X-rays in the 1800s, protons were shown to be a useful tool for studying the contents of opaque materials, but the electromagnetic charge of the protons opened up a new set of interaction processes which complicated their use. These complications in combination with the high expense of generating protons with energies high enough to penetrate typical objects resulted in proton radiography becoming a novelty, demonstrated at accelerator facilities, but not utilized to their full potential until the 1990s at Los Alamos. During this time Los Alamos National Laboratory was investigating a wide range of options, including X-rays and neutrons, as the next generation of probes to be used for thick object flash radiography. During this process it was realized that the charge nature of the protons, which was the source of the initial difficulty with this idea, could be used to recover this technique. By introducing a magnetic imaging lens downstream of the object to be radiographed, the blur resulting from scattering within the object could be focused out of the measurements, dramatically improving the resolution of proton radiography of thick systems. Imaging systems were quickly developed and combined with the temporal structure of a proton beam generated by a linear accelerator, providing a unique flash radiography capability for measurements at Los Alamos National Laboratory. This technique has now been employed at LANSCE for two decades and has been adopted around the world as the premier flash radiography technique for the study of dynamic material properties.

Micro-X-Ray Fluorescence Analysis on a Synchrotron Radiation Wiggler Beam Line

1991 ◽  
Vol 35 (B) ◽  
pp. 995-1000
Author(s):  
J.V. Gilfrich ◽  
E.F. Skelton ◽  
S.B. Qadri ◽  
N.E. Moulton ◽  
D.J. Nagel ◽  
...  
Keyword(s):  
Synchrotron Radiation ◽  
National Laboratory ◽  
Incident Beam ◽  
Fluorescence Analysis ◽  
High Energy ◽  
Brookhaven National Laboratory ◽  
Beam Line ◽  
X Rays ◽  
X Ray ◽  
Electron Orbit

AbstractIt has been well established over recent years that synchrotron radiation possesses some unique features as a source of primary x-rays for x-ray fluorescence analysis. Advantage has been taken of the high intensity emanating from the bending magnets of storage rings to develop x-ray microprobes utilizing apertures or focussing optics, or both, to provide a beam spot at the specimen of the order of micrometers. The use of insertion devices wigglers and undulatora, can further increase the available intensity, especially for the high energy photons. Beam Line X-17C at the National Synchrotron Light Source (NSLS) at Brookhaven National Laboratory, accepts the unmodified continuum radiation from a superconducting wiggler in the storage ring. Some initial XRF measurements have been made on this beam line using apertures in the 10 to 100 micrometer range. The fluorescent radiation was measured by an intrinsic Ge detector having an energy resolution of 300 eV at 15 kev, and located at 90° to the incident beam in the plane of the electron orbit. In samples containing many elements, detection limits of a few ppm were achieved with 100 μm beams.

scholarly journals Time-resolved pair distribution function analysis of disordered materials on beamlines BL04B2 and BL08W at SPring-8

2018 ◽  
Vol 25 (6) ◽  
pp. 1627-1633 ◽  
Author(s):  
Koji Ohara ◽  
Satoshi Tominaka ◽  
Hiroki Yamada ◽  
Masakuni Takahashi ◽  
Hiroshi Yamaguchi ◽  
...  
Keyword(s):  
Distribution Function ◽  
Pair Distribution Function ◽  
Structural Changes ◽  
Function Analysis ◽  
Image Data ◽  
High Energy ◽  
Disordered Materials ◽  
X Rays ◽  
Two Dimensional ◽  
Time Resolved

A dedicated apparatus has been developed for studying structural changes in amorphous and disordered crystalline materials substantially in real time. The apparatus, which can be set up on beamlines BL04B2 and BL08W at SPring-8, mainly consists of a large two-dimensional flat-panel detector and high-energy X-rays, enabling total scattering measurements to be carried out for time-resolved pair distribution function (PDF) analysis in the temperature range from room temperature to 873 K at pressures of up to 20 bar. For successful time-resolved analysis, a newly developed program was used that can monitor and process two-dimensional image data simultaneously with the data collection. The use of time-resolved hardware and software is of great importance for obtaining a detailed understanding of the structural changes in disordered materials, as exemplified by the results of commissioned measurements carried out on both beamlines. Benchmark results obtained using amorphous silica and demonstration results for the observation of sulfide glass crystallization upon annealing are introduced.

Influence of Stacking Faults and Alloy Composition on Irradiation Induced Amorphization of Zrcr2, Zrfe2 And Zr3(Fei. X,Nix)

1995 ◽  
Vol 398 ◽  
Author(s):  
Joseph A. Faldowski ◽  
Arthur T. Motta ◽  
Lawrence M. Howe ◽  
Paul R. Okamoto
Keyword(s):  
Alloy Composition ◽  
National Laboratory ◽  
Argonne National Laboratory ◽  
Stacking Faults ◽  
High Energy ◽  
Critical Temperatures ◽  
Damage Level ◽  
High Energy Electrons ◽  
Defect Accumulation ◽  
Lindemann Criterion

ABSTRACTThe Zr-based intermetallic compounds ZrCr2, ZrFe2 and Zr3(Fei_x,Nix) were irradiated with high energy electrons at the HVEM/Tandem facility at Argonne National Laboratory to study their amorphization behavior. The results show that although ZrCr2 and ZrFe2 have the same Laves phase C15 fee crystal structure, their critical temperatures for amorphization under electron irradiation were 180 K and 80 K, showing that the substitution of Cr for Fe in the sublattice had a marked effect on the annealing characteristics of the material. The low temperature dose to amorphization was higher in ZrFe2 than in ZrCr2 by a factor of two. The presence of a high density of stacking faults had a strong effect on amorphization in both compounds causing the critical temperature to be increased by 10–15 K. By contrast, the addition of Ni to Zr3(Fei_x,Nix) had no effect on amorphization behavior for x=0. 1 and 0. 5. These results are discussed in terms of current models of amorphization based on defect accumulation and the attainment of a critical damage level, such as given by the Lindemann criterion.

Design and operation of a superconducting high energy beam line at the Argonne National Laboratory zero gradient synchrotron

1977 ◽  
Vol 13 (1) ◽  
pp. 294-296 ◽  
Author(s):  
J. Bywater ◽  
C. Brzegowy ◽  
J. Dvorak ◽  
R. Fuja ◽  
H. Ludwig ◽  
...  
Keyword(s):  
National Laboratory ◽  
Argonne National Laboratory ◽  
High Energy ◽  
Beam Line ◽  
Energy Beam ◽  
High Energy Beam
Sign in / Sign up

Export Citation Format

Share Document