Gold-Doped Oxide Nanocomposites Prepared by Two Solution Methods and Their Gas-Sensing Response

2012 ◽  
Vol 1449 ◽  
Author(s):  
Chien-Tsung Wang ◽  
Huan-Yu Chen ◽  
Yu-Chung Chen
Keyword(s):  
Gas Sensor ◽  
Photoelectron Spectroscopy ◽  
Gas Sensing ◽  
Synthesis Method ◽  
Redox Activity ◽  
Precipitation Method ◽  
X Ray ◽  
Oxide Support ◽  
Solution Methods ◽  
Co Precipitation

ABSTRACTGold species on an oxide support possess variable electronic structures via charge transition so as to increase their chemical redox activity. They are also viably promising for use to enhance gas-sensing response when being exploited in a solid state gas sensor. The synthesis method of the gold-loaded materials plays a crucial role in the functionality. In this paper, we report two types of gold/tin oxide based nanopowders prepared by co-precipitation method and by deposition-precipitation method, respectively. They were evaluated as sensing elements in a semiconductor carbon monoxide (CO) gas sensor. Effects of the material type and CO concentration on sensor response were investigated. Their structural characterizations were done by X-ray photoelectron spectroscopy, X-ray diffraction and transmission electron microscopy. Results demonstrate the surface gold species effective to facilitate CO oxidation in gas atmosphere and promote low-temperature sensor performance.

scholarly journals Magnetically separable Fe3O4-supported Ru–Ni bimetallic catalysts for diformyltricyclodecanes hydrogenation to value-added fine chemicals

2020 ◽  
Vol 45 ◽  
pp. 146867831982573
Author(s):  
Hongyi Li ◽  
Yubo Ma
Keyword(s):  
Photoelectron Spectroscopy ◽  
Value Added ◽  
Precipitation Method ◽  
X Ray ◽  
Oxide Support ◽  
Hydrogenation Reactions ◽  
Magnetically Separable ◽  
Temperature Programmed ◽  
Ni Species ◽  
Co Precipitation

A series of magnetically separable catalysts based on Ru–Ni bimetallic compounds supported on Fe3O4 nanoparticles was prepared by the co-precipitation method. These catalysts were evaluated for diformyltricyclodecanes hydrogenation reactions, achieving 97% tricyclodecanedimethylol selectivity at 98% diformyltricyclodecanes conversion under mild conditions. The catalyst could be easily recovered by using the magnetic property of the iron oxide support. The catalysts were characterized with X-ray photoelectron spectroscopy, X-ray diffraction, and temperature-programmed reduction. These complementary characterization results suggested that the superior catalytic activity may be derived from the delicate synergy between Ru and Ni species.

scholarly journals Synthesis of Ce1−xPdxO2−δ Solid Solution in Molten Nitrate

Catalysts ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 640
Author(s):  
Hideaki Sasaki ◽  
Keisuke Sakamoto ◽  
Masami Mori ◽  
Tatsuaki Sakamoto
Keyword(s):  
Electron Microscopy ◽  
Solid Solution ◽  
Solid Solutions ◽  
Photoelectron Spectroscopy ◽  
Synthesis Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Co Precipitation ◽  
Ionic States

CeO2-based solid solutions in which Pd partially substitutes for Ce attract considerable attention, owing to their high catalytic performances. In this study, the solid solution (Ce1−xPdxO2−δ) with a high Pd content (x ~ 0.2) was synthesized through co-precipitation under oxidative conditions using molten nitrate, and its structure and thermal decomposition were examined. The characteristics of the solid solution, such as the change in a lattice constant, inhibition of sintering, and ionic states, were examined using X-ray diffraction (XRD), scanning electron microscopy–energy-dispersive X-ray spectroscopy (SEM−EDS), transmission electron microscopy (TEM)−EDS, and X-ray photoelectron spectroscopy (XPS). The synthesis method proposed in this study appears suitable for the easy preparation of CeO2 solid solutions with a high Pd content.

scholarly journals Preparation of Nanostructured SnO2-NiO Composite Semiconductor for Gas Sensor Applications

2021 ◽  
pp. 391-403
Author(s):  
S. Kumar ◽  
P. Gowthaman ◽  
J. Deenathayalan
Keyword(s):  
Gas Sensor ◽  
Composite Nanofibers ◽  
Volume Fraction ◽  
Gas Sensing ◽  
Precipitation Method ◽  
Response Sensitivity ◽  
X Ray ◽  
Sensing Properties ◽  
Working Temperature ◽  
Gas Sensing Properties

Electro spinning technology combined with chemical precipitation method and high-temperature calcination was used to prepare SnO2-NiO composite semiconductor nanofibers with different Sn content. Scanning electron microscope (SEM), X-ray diffractometer (XRD) and energy dispersive X-ray spectrometer (EDS) were used to characterize the morphology, structure and content of various elements of the sample. Using ethanol as the target gas, the gas sensing properties of SnO2-NiO nanofibers and the influence of Sn content on the gas sensing properties of composite nanofibers were explored. The research results show that SnO2-NiO composite nanofibers have a three-dimensional network structure, and the SnO2 composite can significantly enhance the gas sensitivity of NiO nanofibers. With increase of SnO2 content, the response sensitivity of composite fibers to ethanol gas increases, and the response sensitivity of composite nanofibers with the highest response to ethanol gas with a volume fraction of 100×10-6 at the optimal working temperature of 160℃ are13.4;It is 8.38 times the maximum response sensitivity of NiO nanofibers. Compared with the common ethanol gas sensor MQ-3 on the market, SnO2-NiO composite nanofibers have a lower optimal working temperature and higher response sensitivity, which has certain practical application value

Hydroformylation of Dicyclopentadiene over Rh Catalysts Supported on Fe2O3, Co3O4 and Fe2O3–Co3O4 Mixed Oxide

2017 ◽  
Vol 42 (1) ◽  
pp. 8-13 ◽  
Author(s):  
Yubo Ma ◽  
Zhixian Gao ◽  
Wumanjiang Eli
Keyword(s):  
Mixed Oxide ◽  
Photoelectron Spectroscopy ◽  
Supported Catalyst ◽  
Precipitation Method ◽  
X Ray ◽  
Analysis Techniques ◽  
Rh Catalyst ◽  
Temperature Programmed ◽  
Co Precipitation ◽  
Effect Of The Support

Rh catalysts supported on Fe2O3, Co3O4 and Fe2O3–Co3O4 mixed oxide were prepared by the co-precipitation method. The effect of the support on the performance of the Rh catalysts for the hydroformylation of dicyclopentadiene was investigated using X-ray photoelectron spectroscopy, H2-temperature-programmed reduction, H2-temperature-programmed desorption and Brunauer–Emmett–Teller analysis techniques. The results indicated that the Fe2O3–Co3O4 supported catalyst had a higher dispersion of Rh and thus more Rh+ sites. As a result, the Fe2O3–Co3O4 supported Rh catalyst exhibited higher activity compared with counterparts supported on Fe2O3 and Co3O4.

scholarly journals Bio-assisted preparation of efficiently architectured nanostructures of γ-Fe2O3 as a molecular recognition platform for simultaneous detection of biomarkers

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Sasikala Sundar ◽  
V. Ganesh
Keyword(s):  
Electron Microscopy ◽  
Iron Oxide ◽  
Photoelectron Spectroscopy ◽  
Simultaneous Detection ◽  
Differential Pulse ◽  
Precipitation Method ◽  
Limit Values ◽  
X Ray ◽  
Co Precipitation ◽  
The Individual

Abstract Magnetic nanoparticles of iron oxide (γ-Fe2O3) have been prepared using bio-assisted method and their application in the field of biosensors is demonstrated. Particularly in this work, different nanostructures of γ-Fe2O3 namely nanospheres (NS), nanograsses (NG) and nanowires (NW) are prepared using a bio-surfactant namely Furostanol Saponin (FS) present in Fenugreek seeds extract through co-precipitation method by following “green” route. Three distinct morphologies of iron oxide nanostructures possessing the same crystal structure, magnetic properties, and varied size distribution are prepared and characterized. The resultant materials are analyzed using field emission scanning electron microscopy, transmission electron microscopy, powder X-ray diffraction, X-ray photoelectron spectroscopy, vibrating sample magnetometer and Fourier transform infrared spectroscopy. Moreover, the effect of reaction time and concentration of FS on the resultant morphologies of γ-Fe2O3 nanostructures are systematically investigated. Among different shapes, NWs and NSs of γ-Fe2O3 are found to exhibit better sensing behaviour for both the individual and simultaneous electrochemical detection of most popular biomarkers namely dopamine (DA) and uric acid (UA). Electrochemical studies reveal that γ-Fe2O3 NWs showed better sensing characteristics than γ-Fe2O3 NSs and NGs in terms of distinguishable voltammetric signals for DA and UA with enhanced oxidation current values. Differential pulse voltammetric studies exhibit linear dependence on DA and UA concentrations in the range of 0.15–75 µM and 5 μM – 0.15 mM respectively. The detection limit values for DA and UA are determined to be 150 nM and 5 µM. In addition γ-Fe2O3 NWs modified electrode showed higher sensitivity, reduced overpotential along with good selectivity towards the determination of DA and UA even in the presence of other common interferents. Thus the proposed biosensor electrode is very easy to fabricate, eco-friendly, cheaper and possesses higher surface area suggesting the unique structural patterns of γ-Fe2O3 nanostructures to be a promising candidate for electrochemical bio-sensing and biomedical applications.

scholarly journals Effect of Y Modified Ceria Support in Mono and Bimetallic Pd–Au Catalysts for Complete Benzene Oxidation

Catalysts ◽  
2018 ◽  
Vol 8 (7) ◽  
pp. 283 ◽  
Author(s):  
Lyuba Ilieva ◽  
Anna Venezia ◽  
Petya Petrova ◽  
Giuseppe Pantaleo ◽  
Leonarda Liotta ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Catalytic Performance ◽  
Precipitation Method ◽  
Benzene Oxidation ◽  
Total Oxidation ◽  
Pd Catalysts ◽  
X Ray ◽  
Close Relationship ◽  
Ceria Support ◽  
Co Precipitation

Mono metallic and bimetallic Pd (1 wt. %)–Au (3 wt. %) catalysts were prepared using two ceria supports doped with 1 wt. % Y2O3. Yttrium was added by impregnation or co-precipitation. The catalyst synthesis was carried out by deposition–precipitation method, with sequential deposition–precipitation of palladium over previously loaded gold in the case of the bimetallic samples. The obtained materials, characterized by X-ray powder diffraction (XRD), High resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), and temperature programmed reduction (TPR) techniques, were tested in the complete benzene oxidation (CBO). The results of the characterization analyses and the catalytic performance pointed to a close relationship between structural, redox, and catalytic properties of mono and bimetallic catalysts. Among the monometallic systems, Pd catalysts were more active as compared to the corresponding Au catalysts. The bimetallic systems exhibited the best combustion activity. In particular, over Pd–Au supported on Y-impregnated ceria, 100% of benzene conversion towards total oxidation at the temperature of 150 °C was obtained. Comparison of surface sensitive XPS results of fresh and spent catalysts ascertained the redox character of the reaction.

scholarly journals Synthesis of DME by CO2 hydrogenation over La2O3-modified CuO-ZnO-ZrO2/HZSM-5 catalysts

2017 ◽  
Vol 23 (1) ◽  
pp. 49-56 ◽  
Author(s):  
Yajing Zhang ◽  
Yu Zhang ◽  
Fu Ding ◽  
Kangjun Wang ◽  
Wang Xiaolei ◽  
...  
Keyword(s):  
Photoelectron Spectroscopy ◽  
Direct Synthesis ◽  
Catalytic Performance ◽  
Co2 Hydrogenation ◽  
Precipitation Method ◽  
X Ray ◽  
Temperature Programmed ◽  
And Performance ◽  
Co Precipitation ◽  
Adsorption Desorption

A series of La2O3-modified CuO-ZnO-ZrO2/HZSM-5 catalysts were prepared by an oxalate co-precipitation method. The catalysts were fully characterized by X-ray diffraction (XRD), N2 adsorption-desorption, hydrogen temperature pro-grammed reduction (H2-TPR), ammonia temperature programmed desorption (NH3-TPD), and X-ray photoelectron spectroscopy (XPS) techniques. The effect of the La2O3 content on the structure and performance of the catalysts was thoroughly investigated. The catalysts were evaluated for the direct synthesis of dimethyl ether (DME) from CO2 hydrogenation. The results displayed that La2O3 addition enhanced catalytic performance, and the maximal CO2 conversion (34.3%) and DME selectivity (57.3%) were obtained over the catalyst with 1% La2O3, which due to the smaller size of Cu species and a larger ratio of Cu+/Cu.

scholarly journals Fabrication of an acetone gas sensor based on Si doped WO3 nanorods prepared by reactive magnetron co-sputtering with OAD technique

2021 ◽  
Author(s):  
Waraporn Sucharitakul ◽  
Anupong Sukee ◽  
Pimchanok Leuasoongnoen ◽  
Mati Horprathum ◽  
Tossaporn Lertvanithphol ◽  
...  
Keyword(s):  
Gas Sensor ◽  
Photoelectron Spectroscopy ◽  
Gas Sensing ◽  
High Sensitivity ◽  
Input Power ◽  
Oblique Angle Deposition ◽  
Reactive Magnetron ◽  
X Ray ◽  
Sensing Technology ◽  
Si Doped

Abstract Gas sensing technology is currently applied in a variety of applications. In medical applications, gas sensors can be used for the detection of the biomarker in various diseases, metabolic disorders, diabetes mellitus, asthma, renal, liver diseases, and lung cancer. In this study, we present acetone sensing characteristics of Si-doped WO3 nanorods prepared by a DC reactive magnetron co-sputtering with an oblique-angle deposition (OAD) technique. The composition of Si-doped in WO3 has been studied by varying the electrical input power applied to the Si sputtered target. The nanorods film was constructed at the glancing angle of 85°. After deposition, the films were annealed at 400 ◦C for 4 hrs in the air. The microstructures and phases of the materials were characterized by X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and field-emission scanning electron microscopy (FESEM). The results showed that 1.43 wt% Si-doped WO3 thin film exhibited the maximum response of 5.92 towards 100 ppm of acetone at performing temperature (350 °C), purifying dry air carrier. The process exposed in this work demonstrated the potential of high sensitivity acetone gas sensor at low concentration and may be used as an effective tool for diabetes non-invasive monitoring.

scholarly journals Incorporating N Atoms into SnO2 Nanostructure as an Approach to Enhance Gas Sensing Property for Acetone

Nanomaterials ◽  
2019 ◽  
Vol 9 (3) ◽  
pp. 445 ◽  
Author(s):  
Xiangfeng Guan ◽  
Yongjing Wang ◽  
Peihui Luo ◽  
Yunlong Yu ◽  
Dagui Chen ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Gas Sensor ◽  
Photoelectron Spectroscopy ◽  
High Performance ◽  
Gas Sensing ◽  
Diffuse Reflectance Spectroscopy ◽  
Limit Of Detection ◽  
Low Cost ◽  
X Ray ◽  
Sno2 Nanostructure

The development of high-performance acetone gas sensor is of great significance for environmental protection and personal safety. SnO2 has been intensively applied in chemical sensing areas, because of its low cost, high mobility of electrons, and good chemical stability. Herein, we incorporated nitrogen atoms into the SnO2 nanostructure by simple solvothermal and subsequent calcination to improve gas sensing property for acetone. The crystallization, morphology, element composition, and microstructure of as-prepared products were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), Electron paramagnetic resonance (EPR), Raman spectroscopy, UV–visible diffuse reflectance spectroscopy (UV–vis DRS), and the Brunauer–Emmett–Teller (BET) method. It has been found that N-incorporating resulted in decreased crystallite size, reduced band-gap width, increased surface oxygen vacancies, enlarged surface area, and narrowed pore size distribution. When evaluated as gas sensor, nitrogen-incorporated SnO2 nanostructure exhibited excellent sensitivity for acetone gas at the optimal operating temperature of 300 °C with high sensor response (Rair/Rgas − 1 = 357) and low limit of detection (7 ppb). The nitrogen-incorporated SnO2 gas sensor shows a good selectivity to acetone in the interfering gases of benzene, toluene, ethylbenzene, hydrogen, and methane. Furthermore, the possible gas-sensing mechanism of N-incorporated SnO2 toward acetone has been carefully discussed.

Effect of Noble Metals on Selective Detection of LPG Based on SnO2

1996 ◽  
Vol 459 ◽  
Author(s):  
A. Ratna Phani ◽  
M. Pelino
Keyword(s):  
Photoelectron Spectroscopy ◽  
Noble Metals ◽  
Electrical Response ◽  
Base Material ◽  
High Sensitivity ◽  
Precipitation Method ◽  
X Ray ◽  
Spectroscopy Studies ◽  
Metal Doped ◽  
Co Precipitation

ABSTRACTThe present investigation deals with the electrical response of noble metal doped SnO2 to improve the selectivity for Liquid Petroleum Gas (LPG) in the presence of CO and CH4. Addition of small amounts of nobel metals (Pd, Pt and Rh) to the base material SnO2 is carried out by co-precipitation method. X-ray diffraction and X-ray photoelectron spectroscopy studies are carried out to find out the crystalline phase and chemical composition of the SnO2. The sensor element has been tested for cross selectivity to reducing gases by measuring sensitivity versus sintering temperatures and sensitivity versus operating temperatures. The sensor elements with the composition of Pd (1.5 wt%) andPt (1.5 wt%) in the base material SnO2 sintered at 800°C showed high sensitivity towards LPG at an operating temperature of 350°C suggestingthe possibility to utilize the sensor for the detection of LPG.

Sign in / Sign up

Export Citation Format

Share Document