Fabrication and Characterisation of Calcium Phosphate - Liposome Composites as an Implant Coating

2000 ◽  
Vol 662 ◽  
Author(s):  
Tarinee Pongsaanutin ◽  
Jan T. Czernuszka
Keyword(s):  
Electron Microscopy ◽  
Calcium Phosphate ◽  
Dark Field ◽  
Electrophoretic Method ◽  
Phosphate Ions ◽  
Transmission Electron ◽  
Stainless Steel Cathode ◽  
Cathode Substrate ◽  
Implant Coating ◽  
Drug Delivery Devices

AbstractCalcium phosphate in the form of apatite has been successfully precipitated on the surface of liposomes. Liposome vesicles were prepared by sonication of phosphatidylcholine and this was introduced into an aqueous solution of calcium and phosphate ions supersaturated with respect to hydroxyapatite. Calcium phosphate was shown to precipitate solely on the outer layer surface of the liposome vesicles. These composite assemblies were then deposited onto a stainless steel cathode substrate using an electrophoretic method at physiological temperatures.Scanning electron microscopy (SEM), transmission electron microscopy (TEM), powder xray diffraction (PXRD) and Fourier transform infrared spectroscopy (FTIR) were used to analyse the morphology, structure and chemical composition of the composite coating. The results from PXRD and FTIR show a mixture of amorphous and poor crystalline hydroxyapatite (HAp). This was verified by electron diffraction. Dark field images confirmed that the precipitated HAp deposited solely at the outer surface of the liposomes. SEM micrographs demonstrated a thin uniform coating at the microstructure level. These results suggest that these calcium phosphateliposome composites can be formed. They have tremendous potential for use as drug delivery devices in aiding the treatments of bone disorders.

Imaging sub-micron objects with light microscopy: Visualization of the T-4 bacteriophage

1989 ◽  
Vol 47 ◽  
pp. 834-835
Author(s):  
Malcolm Brown ◽  
Reynolds M. Delgado ◽  
Michael J. Fink
Keyword(s):  
Electron Microscopy ◽  
Light Microscopy ◽  
Focal Plane ◽  
Phase Contrast ◽  
Dark Field ◽  
E Coli ◽  
Polystyrene Beads ◽  
Television Camera ◽  
Transmission Electron ◽  
Universal Microscope

While light microscopy has been used to image sub-micron objects, numerous problems with diffraction-limitations often preclude extraction of useful information. Using conventional dark-field and phase contrast light microscopy coupled with image processing, we have studied the following objects: (a) polystyrene beads (88nm, 264nm, and 557mn); (b) frustules of the diatom, Pleurosigma angulatum, and the T-4 bacteriophage attached to its host, E. coli or free in the medium. Equivalent images of the same areas of polystyrene beads and T-4 bacteriophages were produced using transmission electron microscopy.For light microscopy, we used a Zeiss universal microscope. For phase contrast observations a 100X Neofluar objective (N.A.=1.3) was applied. With dark-field, a 100X planachromat objective (N.A.=1.25) in combination with an ultra-condenser (N.A.=1.25) was employed. An intermediate magnifier (Optivar) was available to conveniently give magnification settings of 1.25, 1.6, and 2.0. The image was projected onto the back focal plane of a film or television camera with a Carl Zeiss Jena 18X Compens ocular.

Intergrowth of niobium tungsten oxides of the tetragonal tungsten bronze type

2020 ◽  
Vol 75 (11) ◽  
pp. 913-919
Author(s):  
Frank Krumeich
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Tungsten Bronze ◽  
Structural Complexity ◽  
Dark Field ◽  
Tetragonal Tungsten Bronze ◽  
Tungsten Oxides ◽  
Transmission Electron ◽  
Scanning Transmission

AbstractSince the 1970s, high-resolution transmission electron microscopy (HRTEM) is well established as the most appropriate method to explore the structural complexity of niobium tungsten oxides. Today, scanning transmission electron microscopy (STEM) represents an important alternative for performing the structural characterization of such oxides. STEM images recorded with a high-angle annular dark field (HAADF) detector provide not only information about the cation positions but also about the distribution of niobium and tungsten as the intensity is directly correlated to the local scattering potential. The applicability of this method is demonstrated here for the characterization of the real structure of Nb7W10O47.5. This sample contains well-ordered domains of Nb8W9O47 and Nb4W7O31 besides little ordered areas according to HRTEM results. Structural models for Nb4W7O31 and twinning occurring in this phase have been derived from the interpretation of HAADF-STEM images. A remarkable grain boundary between well-ordered domains of Nb4W7O31 and Nb8W9O47 has been found that contains one-dimensionally periodic features. Furthermore, short-range order observed in less ordered areas could be attributed to an intimate intergrowth of small sections of different tetragonal tungsten bronze (TTB) based structures.

Atomic-scale structural and compositional analyses of Ruddlesden-Popper planar faults in AO-excess SrTiO3 (A = Sr2+, Ca2+, Ba2+) ceramics

2009 ◽  
Vol 24 (8) ◽  
pp. 2596-2604 ◽  
Author(s):  
Sašo Šturm ◽  
Makoto Shiojiri ◽  
Miran Čeh
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Dark Field ◽  
Atomic Scale ◽  
Transmission Electron ◽  
Initial Stage ◽  
Final Microstructure ◽  
Scanning Transmission ◽  
The Matrix ◽  
Annular Dark Field

The microstructure in AO-excess SrTiO3 (A = Sr2+, Ca2+, Ba2+) ceramics is strongly affected by the formation of Ruddlesden-Popper fault–rich (RP fault) lamellae, which are coherently intergrown with the matrix of the perovskite grains. We studied the structure and chemistry of RP faults by applying quantitative high-resolution transmission electron microscopy and high-angle annular dark-field scanning transmission electron microscopy analyses. We showed that the Sr2+ and Ca2+ dopant ions form RP faults during the initial stage of sintering. The final microstructure showed preferentially grown RP fault lamellae embedded in the central part of the anisotropic perovskite grains. In contrast, the dopant Ba2+ ions preferably substituted for Sr2+ in the SrTiO3 matrix by forming a BaxSr1−xTiO3 solid solution. The surplus of Sr2+ ions was compensated structurally in the later stages of sintering by the formation of SrO-rich RP faults. The resulting microstructure showed RP fault lamellae located at the surface of equiaxed BaxSr1-xTiO3 perovskite grains.

scholarly journals Analytical High-resolution Electron Microscopy Reveals Organ-specific Nanoceria Bioprocessing

2017 ◽  
Vol 46 (1) ◽  
pp. 47-61 ◽  
Author(s):  
Uschi M. Graham ◽  
Robert A. Yokel ◽  
Alan K. Dozier ◽  
Lawrence Drummy ◽  
Krishnamurthy Mahalingam ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
High Resolution ◽  
Analytical Electron Microscopy ◽  
High Resolution Electron Microscopy ◽  
Dark Field ◽  
Transmission Electron ◽  
Analytical Electron ◽  
Organ Specific

This is the first utilization of advanced analytical electron microscopy methods, including high-resolution transmission electron microscopy, high-angle annular dark field scanning transmission electron microscopy, electron energy loss spectroscopy, and energy-dispersive X-ray spectroscopy mapping to characterize the organ-specific bioprocessing of a relatively inert nanomaterial (nanoceria). Liver and spleen samples from rats given a single intravenous infusion of nanoceria were obtained after prolonged (90 days) in vivo exposure. These advanced analytical electron microscopy methods were applied to elucidate the organ-specific cellular and subcellular fate of nanoceria after its uptake. Nanoceria is bioprocessed differently in the spleen than in the liver.

scholarly journals Transmission electron microscopy analysis of the crystallography of precipitates in Mg–Sn alloys aged at high temperatures

2014 ◽  
Vol 47 (5) ◽  
pp. 1729-1735 ◽  
Author(s):  
Xin Nie ◽  
Yimin Guan ◽  
Dongshan Zhao ◽  
Yu Liu ◽  
Jianian Gui ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Three Dimensional ◽  
Dark Field ◽  
Peak Hardness ◽  
Invariant Line ◽  
Orientation Relationships ◽  
Transmission Electron Microscopy Analysis ◽  
Transmission Electron ◽  
Annular Dark Field

The crystallographic orientation relationships (ORs) of precipitated β-Mg2Sn particles in Mg–9.76 wt% Sn alloy aged at 573 K for 5 h, corresponding to its peak hardness, were investigated by advanced transmission electron microscopy (TEM). OR-3 of (110)β//(0001)αand [\overline 111]β//[1\overline 210]αand OR-4 of (110)β//(0001)αand [001]β//[2\overline 1\overline 10]αare the key ORs of β-Mg2Sn particles in the alloy. The proportions of β-Mg2Sn particles exhibiting OR-3 and OR-4 were determined as 75.1 and 24.3%, respectively. Crystallographic factors determined the predominance of OR-3 in the precipitated β-Mg2Sn particles. This mechanism was analyzed by a three-dimensional invariant line model constructed using a transformation matrix in reciprocal space. Models of the interface of precipitated β-Mg2Sn and the α-Mg matrix were constructedviahigh-resolution TEM and atomic resolution high-angle annular dark-field scanning TEM.

scholarly journals Ru Catalyst Encapsulated into the Pores of MIL-101 MOF: Direct Visualization by TEM

Materials ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 4531
Author(s):  
Maria Meledina ◽  
Geert Watson ◽  
Alexander Meledin ◽  
Pascal Van Der Voort ◽  
Joachim Mayer ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Scanning Transmission Electron Microscopy ◽  
Dark Field ◽  
Catalyst Nanoparticles ◽  
Ru Catalyst ◽  
Ru Nanoparticles ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
Annular Dark Field

Ru catalyst nanoparticles were encapsulated into the pores of a Cr-based metal-organic framework (MOF)—MIL-101. The obtained material, as well as the non-loaded MIL-101, were investigated down to the atomic scale by annular dark-field scanning transmission electron microscopy using low dose conditions and fast image acquisition. The results directly show that the used wet chemistry loading approach is well-fitted for the accurate embedding of the individual catalyst nanoparticles into the cages of the MIL-101. The MIL-101 host material remains crystalline after the loading procedure, and the encapsulated Ru nanoparticles have a metallic nature. Annular dark field scanning transmission electron microscopy, combined with EDX mapping, is a perfect tool to directly characterize both the embedded nanoparticles and the loaded nanoscale MOFs. The resulting nanostructure of the material is promising because the Ru nanoparticles hosted in the MIL-101 pores are prevented from agglomeration—the stability and lifetime of the catalyst could be improved.

Determination of Nanocluster Sizes from Dark-Field Scanning Transmission Electron Microscopy Images

2008 ◽  
Vol 112 (6) ◽  
pp. 1759-1763 ◽  
Author(s):  
Norihiko L. Okamoto ◽  
Bryan W. Reed ◽  
Shareghe Mehraeen ◽  
Apoorva Kulkarni ◽  
David Gene Morgan ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Scanning Transmission Electron Microscopy ◽  
Dark Field ◽  
Scanning Transmission Electron ◽  
Transmission Electron ◽  
Scanning Transmission ◽  
Microscopy Images

The Crystal Structure of the β’-Phase Including Ag in Al-Mg-Si-Ag Alloy

2011 ◽  
Vol 409 ◽  
pp. 67-70 ◽  
Author(s):  
Junya Nakamura ◽  
Kenji Matsuda ◽  
Tatsuo Sato ◽  
Calin D. Marioara ◽  
Sigmund J. Andersen ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Dark Field ◽  
Unit Cell ◽  
Atomic Column ◽  
Direction Parallel ◽  
Ag Addition ◽  
Domain Structures ◽  
Β Phase ◽  
Transmission Electron

In the present work, b’ phase in alloys Al -1.0 mass% Mg2Si -0.5 mass% Ag (Ag-addition) and Al -1.0 mass% Mg2Si (base) was investigated by high resolution transmission electron microscopy (HRTEM) and selected area electron diffraction (SAED) to understand the effect of Ag addition. The b’ phase is rod-shape with the longest direction parallel to <001>Al. HRTEM images and SAED patterns obtained along the direction were similar for the b’ phase in both alloys. The unit cell of b’-phase in Ag-addition alloy is hexagonal with the same c-axis dimension as the Ag-free b’, but shorter a-axis. Ag was found in the composition of the rod-shaped precipitates in Ag-addition alloy by energy dispersive X-ray spectroscopy (EDS). In addition, the distribution of Ag was investigated by energy filtered mapping and high annular angular dark field scanning transmission electron microscopy (HAADF-STEM). The Ag-containing atomic column was observed in every b’ unit cell, and the unit cell symmetry is slightly changed as compared with the Ag-free b’. The Ag-containing b’ rods have complicated domain structures. The interfaces of these particles are enriched with Ag atoms that occupy the lattice positions in the Al matrix. The occupancy of the Ag-containing atomic columns seem to vary both inside particles, as well as at the interfaces.

Sign in / Sign up

Export Citation Format

Share Document