Effect of Iron Substitution on the High-temperature Properties of Sm(Co,Cu,Ti)z Permanent Magnets

2001 ◽  
Vol 674 ◽  
Author(s):  
Jian Zhou ◽  
Ralph Skomski ◽  
David J. Sellmyer ◽  
Wei Tang ◽  
George C. Hadjipanayis
Keyword(s):  
High Temperature ◽  
Room Temperature ◽  
Permanent Magnets ◽  
Site Occupancy ◽  
Positive Temperature Coefficient ◽  
Positive Temperature ◽  
X Ray Diffraction ◽  
Two Phase ◽  
X Ray ◽  
Iron Substitution

ABSTRACTRecently, Ti-substituted Sm-Co permanent magnets have attracted renewed attention due to their interesting high-temperature coercivity. Our presentation deals with the effect of iron substitutions on the magnetic properties of the materials. X-ray diffraction shows that the investigated Sm(Co,Fe,Cu,Ti)z materials (z = 7.0 - 7.6) are two-phase magnets, consisting of 1:5 and 2:17 regions. The iron content affects both the coercivity and the magnetization. Depending on composition and heat treatment, some samples show a positive temperature coefficient of the coercivity in the temperature range from 22 °C to 550 °C. Moderate amounts of iron enhance the room-temperature coercivity. For example, the room-temperature coercivity of Sm(Co6.0Fe0.4Cu0.6Ti0.3) is 9.6 kOe, as compared to 7.6 kOe for Sm(Co6.4Cu0.6Ti0.3). At high temperatures, the addition of Fe has a deteriorating effect on the coercivity, which is as high as 10.0 kOe at 500 °C for Sm(Co6.4Cu0.6Ti0.3). The room-temperature magnetization increases on iron substitution, from 73 emu/g for Sm(Co6.4Cu0.6Ti0.3) to 78 emu/g for Sm(Co6.0Fe0.4Cu0.6Ti0.3). The observed temperature dependence is ascribed to the preferential dumbbell-site occupancy of the Fe atoms.

Study on the Effects of (Bi1/2Na1/2)TiO3 Content on the Curie Temperature of (Bi1/2Na1/2)TiO3-BaTiO3 PTCR Ceramics

2011 ◽  
Vol 687 ◽  
pp. 411-415
Author(s):  
Long Xing Yang ◽  
Xing Wen Zhu ◽  
Li Zhe Li ◽  
Wen Zhong Jiang ◽  
Xiao Zhou
Keyword(s):  
Curie Temperature ◽  
Room Temperature ◽  
Ceramic Materials ◽  
Positive Temperature Coefficient ◽  
Lead Free ◽  
Room Temperature Resistivity ◽  
Positive Temperature ◽  
X Ray Diffraction ◽  
X Ray ◽  
Temperature Resistivity

Perovskite-structured (Bi1/2Na1/2)TiO3 (BNT) ferroelectric with Curie temperature about 320°C is considered to be a good candidate of high temperature lead-free materials with a positive temperature coefficient of resistance (PTCR). In this study, lead-free PTCR ceramics with compositions of (1-x)BaTiO3-x(Bi1/2Na1/2)TiO3 (BT-BNT x=0.5-55mol%) were successfully prepared without any additional donor or acceptor dopants. The effects of BNT content on the Curie temperature Tc and the PTC effect of the ceramic materials were investigated. The X-ray diffraction data indicated that BT phase and BNT phase formed a solid solution during sintering even though the x value was up to 55mol%. The Curie temperature Tc of the samples increased from ~130°C to ~216°C with the increase of the BNT amount (x value) from 0.5mol% to 40mol%. However, it decreased when excess BNT was added (x value increased from 40mol% up to 55mol%), which was resulted from the volatile effects of Bi3+ and Na+ ions during sintering. The sample of 0.6BaTiO3- 0.4(Bi1/2Na1/2)TiO3 with Tc =216°C, room-temperature resistivity 104 Ω·cm and Rmax/Rmin= 102.7 was obtained. There is a relationship between the Curie temperature and the cell volume of the perovskite structured lattice.

Mechanical Alloying Behavior in the Nb-Si, Ta-Si, and Nb-Ta-Si Systems

1988 ◽  
Vol 133 ◽  
Author(s):  
K. S. Kumar ◽  
S. K. Mannan
Keyword(s):  
High Temperature ◽  
Mechanical Alloying ◽  
Mechanical Milling ◽  
Room Temperature ◽  
Crystalline Compound ◽  
X Ray Diffraction ◽  
X Ray ◽  
Β Phase ◽  
Α Phase

ABSTRACTThe mechanical alloying behavior of elemental powders in the Nb-Si, Ta-Si, and Nb-Ta-Si systems was examined via X-ray diffraction. The line compounds NbSi2 and TaSi2 form as crystalline compounds rather than amorphous products, but Nb5Si3 and Ta5Si3, although chemically analogous, respond very differently to mechanical milling. The Ta5Si3 composition goes directly from elemental powders to an amorphous product, whereas Nb5Si3 forms as a crystalline compound. The Nb5Si3 compound consists of both the tetragonal room-temperature α phase (c/a = 1.8) and the tetragonal high-temperature β phase (c/a = 0.5). Substituting increasing amounts of Ta for Nb in Nb5Si3 initially stabilizes the α-Nb5Si3 structure preferentially, and subsequently inhibits the formation of a crystalline compound.

Phase Diagram of the W-doped Pb(Zn1/3Nb2/3)O3–BaTiO3– PbTiO3 System Around a Morphotropic Phase Boundary Composition

2002 ◽  
Vol 17 (5) ◽  
pp. 1085-1091 ◽  
Author(s):  
W. Z. Zhu ◽  
M. Yan ◽  
A. L. Kholkin ◽  
P. Q. Mantas ◽  
J. L. Baptista
Keyword(s):  
High Temperature ◽  
Phase Boundary ◽  
Morphotropic Phase Boundary ◽  
Room Temperature ◽  
X Ray Diffraction ◽  
X Ray ◽  
Electrical Neutrality ◽  
Phase Boundary Composition ◽  
A Site ◽  
Successive Phase

The morphotropic phase boundary (MPB) composition that is characterized by the coexistence of rhombohedral and tetragonal phases in the Pb(Zn1/3Nb2/3)O3–BaTiO3– PbTiO3 system was modified by W-doping at the B site of a perovskite structural block. To maintain the electrical neutrality, creation of A-site vacancies was intentionally introduced in the formulation of the examined compositions. Incorporation of W ions was revealed to stabilize the tetragonal phase against the rhombohedral one, shifting the MPB toward the PZN-rich end at room temperature. High-temperature x-ray diffraction examination in combination with dielectric measurements discloses two successive phase transitions as a sample is cooled from high temperature, namely, paraelectric cubic to ferroelectric rhombohedral followed by ferroelectric rhombohedral to ferroelectric tetragonal. W addition appears to suppress the first transition while promoting the second one.

scholarly journals Crystal Chemistry and Luminescence Properties of Eu-Doped Polycrystalline Hydroxyapatite Synthesized by Chemical Precipitation at Room Temperature

Crystals ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 250 ◽  
Author(s):  
Francesco Baldassarre ◽  
Angela Altomare ◽  
Nicola Corriero ◽  
Ernesto Mesto ◽  
Maria Lacalamita ◽  
...  
Keyword(s):  
Fourier Transform ◽  
High Temperature ◽  
Inductively Coupled Plasma ◽  
Room Temperature ◽  
Annealing Temperature ◽  
Chemical Precipitation ◽  
Precipitation Method ◽  
X Ray Diffraction ◽  
X Ray ◽  
Inductively Coupled

Europium-doped hydroxyapatite Ca10(PO4)6(OH)2 (3% mol) powders were synthesized by an optimized chemical precipitation method at 25 °C, followed by drying at 120 °C and calcination at 450 °C and 900 °C. The obtained nanosized crystallite samples were investigated by means of a combination of inductively coupled plasma (ICP) spectroscopy, powder X-ray diffraction (PXRD), Fourier Transform Infrared (FTIR), Raman and photoluminescence (PL) spectroscopies. The Rietveld refinement in the hexagonal P63/m space group showed europium ordered at the Ca2 site at high temperature (900 °C), and at the Ca1 site for lower temperatures (120 °C and 450 °C). FTIR and Raman spectra showed slight band shifts and minor modifications of the (PO4) bands with increasing annealing temperature. PL spectra and decay curves revealed significant luminescence emission for the phase obtained at 900 °C and highlighted the migration of Eu from the Ca1 to Ca2 site as a result of increasing calcinating temperature.

Structural Characterization of Co70-xNixGa30 Ferromagnetic Shape Memory Alloys

2008 ◽  
Vol 52 ◽  
pp. 103-108 ◽  
Author(s):  
Sidananda Sarma ◽  
A. Srinivasan
Keyword(s):  
Magnetic Susceptibility ◽  
Shape Memory ◽  
Room Temperature ◽  
Structural Parameters ◽  
Ac Magnetic Susceptibility ◽  
X Ray Diffraction ◽  
Ferromagnetic Shape Memory Alloys ◽  
Two Phase ◽  
X Ray ◽  
Ferromagnetic Shape Memory

Polycrystalline ingots of Co70–xNixGa30 (20 ≤ x ≤ 26) ferromagnetic shape memory alloy (FSMA) were prepared by arc melting elemental powders followed by homogenization at 1230 °C for 24 hrs and quenching in liquid nitrogen. Room temperature X-Ray diffraction (XRD) patterns of as-quenched samples exhibited single-phase tetragonal structure for alloy compositions with x = 21 to 26, and a two-phase structure (cubic A2-phase along with weak tetragonal phase) for the alloy with x = 20. Rietveld refinement was performed on the X-ray diffraction patterns to obtain the refined structural parameters. Differential Scanning Calorimeter (DSC) curves recorded from 30 °C to 250 °C revealed martensite-austenite and austenite-martensite transformations in all alloys except the alloy with composition x = 20. Low temperature ac magnetic susceptibility measurements confirmed the existence of martensitic transformations in the alloy with x = 20. The structural transformation temperatures show a linear variation with e/a ratio. All the alloys were ferromagnetic at room temperature. Curie temperature was determined using a high temperature ac magnetic susceptibility measurement set-up.

PHASE STRUCTURE, PIEZOELECTRIC AND MULTIFERRIOC BEHAVIOR OF (K0.48Na0.52)NbO3-Co2O3 PIEZOELECTRIC CERAMICS

2011 ◽  
Vol 04 (03) ◽  
pp. 225-229 ◽  
Author(s):  
WENJUAN WU ◽  
DINGQUAN XIAO ◽  
JIAGANG WU ◽  
JING LI ◽  
JIANGUO ZHU
Keyword(s):  
Room Temperature ◽  
Sintering Temperature ◽  
Magnetic Behavior ◽  
Orthorhombic Phase ◽  
Piezoelectric Ceramics ◽  
X Ray Diffraction ◽  
Two Phase ◽  
X Ray ◽  
Solid State Sintering ◽  
Sintering Method

( K 0.48 Na 0.52) NbO 3-x% Co 2 O 3 (x = 0, 0.03 and 0.05) (KNN-x% Co2O3 ) lead-free piezoelectric ceramics were prepared by the conventional solid-state sintering method. An orthorhombic phase was observed for all KNN-x% Co2O3 ceramics at room temperature, and two phase transitions were confirmed by the high temperature X-ray diffraction and the temperature dependence of the dielectric constant. The Co2O3 greatly improves the density and decreases the sintering temperature of KNN ceramics. The KNN-0.05 mol%Co2O3 ceramic exhibits good properties (d33 = 120 pC/N , k p = 0.41, Q m = 213 and T c = 407°C) and a good age stability. The multiferroic behavior was also observed at room temperature for the KNN-0.05 mol%Co2O3 ceramic, as confirmed by P–E loops and magnetic behavior.

Low-temperature crystal structure of RS-thiocamphor

2004 ◽  
Vol 219 (9) ◽  
Author(s):  
E. Louise R. Robins ◽  
Michela Brunelli ◽  
Asiloé J. Mora ◽  
Andrew N. Fitch
Keyword(s):  
Crystal Structure ◽  
Phase Transitions ◽  
Low Temperature ◽  
Room Temperature ◽  
Cubic Phase ◽  
X Ray Diffraction ◽  
Orthorhombic Space Group ◽  
Two Phase ◽  
X Ray ◽  
Low Temperature Crystal Structure

AbstractDSC and high-resolution powder X-ray diffraction measurements in the range 295 K–100 K show that RS-thiocamphor undergoes two phase transitions. The first, at around 260 K on cooling, is from the room-temperature body-centred-cubic phase to a short-lived intermediate. At 258 K the low-temperature form starts to appear. The crystal structure of the latter is orthorhombic, space group

Neue Arsenide mit ThCr2Si2- oder einer damit verwandten Struktur: Die Verbindungen ARh2As2 (A: Eu, Sr, Ba) und BaZn2As2 / New Arsenides with ThCr2Si2-type or Related Structures: The Compounds ARh2As2 (A: Eu, Sr, Ba) and BaZn2As2

2007 ◽  
Vol 62 (2) ◽  
pp. 155-161 ◽  
Author(s):  
Andrea Hellmann ◽  
Anke Löhken ◽  
Andreas Wurth ◽  
Albrecht Mewis
Keyword(s):  
High Temperature ◽  
Room Temperature ◽  
Two Phase ◽  
Atomic Size ◽  
X Ray ◽  
Β Phase ◽  
Vertex Sharing ◽  
3D Network ◽  
Ray Methods ◽  
High Temperature Modification

Four new arsenides of rhodium and zinc were prepared by heating mixtures of the elements at high temperatures (1000 - 1200 °C) and investigated by single crystal X-ray methods. EuRh2As2 (a = 4.067(1), c = 11.319(2) Å ) and BaRh2As2 (a = 4.053(1), c = 12.770(3) Å ) crystallize with the well-known ThCr2Si2-type (I4/mmm; Z = 2). Due to the rigid layers of RhAs4 tetrahedra, and to the atomic size of europium and barium, the As-As distances between the layers with values of 2.97 and 3.66 Å, respectively, are very long. SrRh2As2 is polymorphic and undergoes two phase transitions at about 190 and 282 °C. Main features of the three crystal structures are also layers of RhAs4 tetrahedra. At room temperature α-SrRh2As2 (a = 5.676(1), b = 6.178(2), c = 11.052(2) Å ) probably crystallizes with the BaNi2Si2-type (Cmcm; Z = 4), whereas β -SrRh2As2 (a = 5.760(3), b = 6.067(4), c = 11.264(5) A° , Fmmm, Z = 4) forms a new orthorhombically distorted variant of the ThCr2Si2-type. Single crystals grown in a flux of lead and quenched at high temperature show that the γ -phase (a = 4.112(1), c = 11.431(6) Å ) crystallizes with the ThCr2Si2-type. The same is true for the high temperature modification of BaZn2As2 (β -phase; a = 4.120(1), c = 13.578(1) Å ), whereas the already known α-BaZn2As2 forms the α-BaCu2S2-type (Pnma; Z = 4) consisting of a 3D-network of edge- and vertex-sharing ZnAs4 tetrahedra with Ba atoms in the voids of this network.

High-pressure syntheses and crystal structures of orthorhombic DyGaO3 and trigonal GaBO3

2015 ◽  
Vol 70 (4) ◽  
pp. 207-214 ◽  
Author(s):  
Daniela Vitzthum ◽  
Stefanie A. Hering ◽  
Lukas Perfler ◽  
Hubert Huppertz
Keyword(s):  
High Pressure ◽  
High Temperature ◽  
Single Crystal ◽  
Crystal Structures ◽  
Diffraction Data ◽  
Room Temperature ◽  
X Ray Diffraction ◽  
Space Group ◽  
X Ray ◽  
High Pressure High Temperature

AbstractOrthorhombic dysprosium orthogallate DyGaO3 and trigonal gallium orthoborate GaBO3 were synthesized in a Walker-type multianvil apparatus under high-pressure/high-temperature conditions of 8.5 GPa/1350 °C and 8 GPa/700 °C, respectively. Both crystal structures could be determined by single-crystal X-ray diffraction data collected at room temperature. The orthorhombic dysprosium orthogallate crystallizes in the space group Pnma (Z = 4) with the parameters a = 552.6(2), b = 754.5(2), c = 527.7(2) pm, V = 0.22002(8) nm3, R1 = 0.0309, and wR2 = 0.0662 (all data) and the trigonal compound GaBO3 in the space group R3̅c (Z = 6) with the parameters a = 457.10(6), c = 1419.2(3) pm, V = 0.25681(7) nm3, R1 = 0.0147, and wR2 = 0.0356 (all data).

Behaviors of the Zr–1.0Sn–0.39Nb–0.31Fe–0.05Cr Alloy at High Temperature

2011 ◽  
Vol 399-401 ◽  
pp. 80-84
Author(s):  
Yi Yuan Tang ◽  
Jie Li Meng ◽  
Kai Lian Huang ◽  
Jian Lie Liang
Keyword(s):  
Thermal Expansion ◽  
Phase Transformation ◽  
High Temperature ◽  
Oxide Film ◽  
Room Temperature ◽  
X Ray Diffraction ◽  
X Ray ◽  
Thin Oxide Film ◽  
Thermal Expansion Coefficients ◽  
Expansion Coefficients

Phase transformation of the Zr-1.0Sn-0.39Nb-0.31Fe-0.05Cr alloy was investigated by high temperature X-ray diffraction (XRD). The XRD results revealed that the alloy contained two precipitates at room temperature, namely β-Nb and hexagonal Zr(Nb,Fe,Cr,)2. β-Nb was suggested to dissolve into the α-Zr matrix at the 580oC. Thin oxide film formed at the alloy’s surface was identified as mixture of the monoclinic Zr0.93O2and tetragonal ZrO2, when the temperature reached to 750oC and 850 oC. The thermal expansion coefficients of αZr in this alloy was of αa = 8.39×10-6/°C, αc = 2.48×10-6/°C.

Sign in / Sign up

Export Citation Format

Share Document