Rational Design of Organic Electro-Optic Materials

2001 ◽  
Vol 708 ◽  
Author(s):  
Alex Jen ◽  
Robert Neilsen ◽  
Bruce Robinson ◽  
William H. Steier ◽  
Larry Dalton
Keyword(s):  
Wavelength Division Multiplexing ◽  
Material Properties ◽  
Electrostatic Interactions ◽  
Rational Design ◽  
Elevated Temperatures ◽  
Optical Loss ◽  
Quality Factors ◽  
Electro Optic ◽  
Lattice Hardening

ABSTRACTA number of material properties must be optimized before organic electro-optic materials can be used for practical device applications. These include electro-optic activity, optical transparency, and stability including both thermal and photochemical stability. Exploiting an improved understanding of the structure/function relationships, we have recently prepared materials exhibiting electro-optic coefficients of greater than 50 pm/V and optical loss values of less than 0.7 dB/cm at the telecommunication wavelengths of 1.3 and 1.55 microns. When oxygen is excluded to a reasonable extent, long-term photostability to optical power levels of 20 mW has been observed. Photostability is further improved by addition of scavengers and by lattice hardening. Long-term (greater than 1000 hours) thermal stability of poling-induced electro-optic activity is also observed at elevated temperatures (greater than 80°C) when appropriate lattice hardening is used. The successful improvement of organic electro-optic materials rests upon (1) attention to the design of chromophore structure including design to inhibit unwanted intermolecular electrostatic interactions and to improve chromophore instability and (2) attention to processing conditions including those involved in spin casting, electric field poling, and lattice hardening. A particularly attractive new direction has been the exploitation of dendrimer structures and particularly of multi-chromophore containing dendrimer structures. This approach has permitted the simultaneous improvement of all material properties. Development of new materials has facilitated the fabrication of a number of prototype devices and most recently has permitted investigation of the incorporation of electro-optic materials into photonic bandgap and microresonator structures. The latter are relevant to active wavelength division multiplexing (WDM). Significant quality factors (greater than 10,000) have been realized for such devices permitting wavelength discrimination at telecommunication wavelengths of 0.01 nm.

scholarly journals Organic electro-optic materials

2004 ◽  
Vol 76 (7-8) ◽  
pp. 1421-1433 ◽  
Author(s):  
L. R. Dalton
Keyword(s):  
Wavelength Division Multiplexing ◽  
Organic Materials ◽  
Frequency Tuning ◽  
Optical Network ◽  
Three Dimensional ◽  
Optical Loss ◽  
Laser Frequency ◽  
Dielectric Constants ◽  
Ring Microresonator ◽  
Electro Optic

The macroscopic electrooptic activity of organic materials depends upon the molecular hyperpolarizability, beta, of individual organic chromophores and upon the product of number density, N, and noncentrosymmetric order, <cos3theta>, of the chromophores in a hardened polymer lattice. Quantum and statistical mechanical calculations provide the basis for rational improvement of these parameters leading to electro-optic coefficients (at telecommunication wavelengths) of greater than 100 pm/V (a factor of 3 larger than values for the best inorganic material, lithium niobate). Such calculations also provide insight into what further improvements can be expected. Owing to low and relatively dispersionless dielectric constants and refractive indicies, organic materials facilitate the fabrication of devices with 3 dB operational bandwidths of greater than 100 GHz. Moreover, robust and low optical loss materials can be fabricated by design. An under-appreciated advantage of organic electro-optic materials is their processability, and a variety of stripline, cascaded prism and super-prism, and ring microresonator devices are readily fabricated. Conformal, flexible, and three-dimensional devices are also readily produced. With ring microresonator devices, active wavelength division multiplexing, optical network reconfiguration, and laser frequency tuning are straightforwardly accomplished.

scholarly journals CO Detection Investigation at High Temperature by SiC MISFET Metal/Oxide Gas Sensors

Proceedings ◽  
2021 ◽  
Vol 56 (1) ◽  
pp. 41
Author(s):  
Lida Khajavizadeh ◽  
Anita Lloyd Spetz ◽  
Mike Andersson
Keyword(s):  
High Temperature ◽  
Gas Sensors ◽  
Elevated Temperatures ◽  
Long Term Stability ◽  
Stability Performance ◽  
Catalytic Metal ◽  
Co Detection ◽  
Effect Transistor ◽  
Metal Oxide Gas Sensors

In order to investigate the necessary device improvements for high-temperature CO sensing with SiC metal insulator semiconductor field effect transistor (MISFET)-based chemical gas sensors, devices employing, as the gas-sensitive gate contact, a film of co-deposited Pt/Al2O3 instead of the commonly used catalytic metal-based contacts were fabricated and characterized for CO detection at elevated temperatures and different CO and O2 levels. It can be concluded that the sensing mechanism at elevated temperatures correlates with oxygen removal from the sensor surface rather than the surface CO coverage as observed at lower temperatures. The long-term stability performance was also shown to be improved compared to that of previously studied devices.

Technology Focus: Wellbore Tubulars (July 2021)

2021 ◽  
Vol 73 (07) ◽  
pp. 50-50
Author(s):  
Robello Samuel
Keyword(s):  
Geothermal Energy ◽  
Elevated Temperatures ◽  
Clean Energy ◽  
Well Integrity ◽  
The Future ◽  
Geothermal Wells ◽  
Abandoned Wells ◽  
Thermal Simulations ◽  
Technology Focus

How we think about the future of the pipe industry must evolve. How must tubular design and manufacturing change as we transition to clean energy? Geothermal energy is an area that needs attention and, further, needs very specific attention on tubulars. Tubulars are an important component in the construction of geothermal wells, and we must align our requirements for geothermal energy. Some of the main challenges encountered in geothermal wells are corrosion and scaling. Moreover, temperature becomes a major consideration for tubulars, even more so with the temperature excursion during geothermal production. Perhaps the critical aspect in the design of the geothermal wells involves casing selection and design. Beyond manufacturing casing pipes to withstand these problems, considering the manufacturing of other components, such as connections, float collars, and float shoes, also is essential. Thermal expansion and thermal excursion of casings are well-integrity concerns; thus, casing design is important for long-term sustainability of geothermal wells. Apart from thermal simulations, guidelines and software are needed to undergird the designs to withstand not only temperature excursions but also thermomechanical and thermochemical loadings. Engineered nonmetallic casings also provide an alternative solution because they provide the desired strength and corrosion resistance in addition to meeting the goals of sustainability. Undoubtedly, the future of the tubular industry is going to be revitalized. The question now is how we can retrofit existing abandoned wells for this purpose. Recommended additional reading at OnePetro: www.onepetro.org. SPE 199570 - Special Considerations for Well-Tubular Design at Elevated Temperatures by Gang Tao, C-FER Technologies, et al.

PREDICTION OF PEEK RESIN PROPERTIES FOR PROCESSING MODELING USING MOLECULAR DYNAMICS

2021 ◽  
Author(s):  
KHATEREH KASHMARI ◽  
PRATHAMESH DESHPANDE ◽  
SAGAR PATIL ◽  
SAGAR SHAH ◽  
MARIANNA MAIARU ◽  
...  
Keyword(s):  
Molecular Dynamics ◽  
Residual Stresses ◽  
Crystallization Kinetics ◽  
Material Properties ◽  
Elevated Temperatures ◽  
Processing Parameters ◽  
Thermomechanical Properties ◽  
Volumetric Shrinkage ◽  
Processing Temperature ◽  
Wide Range

Polymer Matrix Composites (PMCs) have been the subject of many recent studies due to their outstanding characteristics. For the processing of PMCs, a wide range of elevated temperatures is typically applied to the material, leading to the development of internal residual stresses during the final cool-down step. These residual stresses may lead to net shape deformations or internal damage. Also, volumetric shrinkage, and thus additional residual stresses, could be created during crystallization of the semi-crystalline thermoplastic matrix. Furthermore, the thermomechanical properties of semi-crystalline polymers are susceptible to the crystallinity content, which is tightly controlled by the processing parameters (processing temperature, temperature holding time) and material properties (melting and crystallization temperatures). Hence, it is vital to have a precise understanding of crystallization kinetics and its impact on the final component's performance to accurately predict induced residual stresses during the processing of these materials. To enable multi-scale process modeling of thermoplastic composites, molecular-level material properties must be determined for a wide range of crystallinity levels. In this study, the thermomechanical properties and volumetric shrinkage of the thermoplastic Poly Ether Ether Ketone (PEEK) resin are predicted as a function of crystallinity content and temperature using molecular dynamics (MD) modeling. Using crystallization-kinetics models, the thermo-mechanical properties are directly related to processing time and temperature. This research can ultimately predict the residual stress evolution in PEEK composites as a function of processing parameters.

scholarly journals High–flux Composite PTMSP Membranes with Long–term Stable Characteristics at Elevated Temperatures and Pressures

2012 ◽  
Vol 44 ◽  
pp. 782-783 ◽  
Author(s):  
G. Dibrov ◽  
E. Novitskii ◽  
V. Vasilevskii ◽  
S. Bazhenov ◽  
V. Volkov
Keyword(s):  
Elevated Temperatures ◽  
High Flux

scholarly journals 3D Printed Chromophoric Sensors

Chemosensors ◽  
2021 ◽  
Vol 9 (11) ◽  
pp. 317
Author(s):  
Zachary Brounstein ◽  
Jarrod Ronquillo ◽  
Andrea Labouriau
Keyword(s):  
Thermal Stability ◽  
3D Printing ◽  
Material Properties ◽  
Chemical Structure ◽  
Elevated Temperatures ◽  
Advanced Manufacturing ◽  
Color Changes ◽  
Printed Sensors ◽  
3D Printed ◽  
Manufacturing Techniques

Eight chromophoric indicators are incorporated into Sylgard 184 to develop sensors that are fabricated either by traditional methods such as casting or by more advanced manufacturing techniques such as 3D printing. The sensors exhibit specific color changes when exposed to acidic species, basic species, or elevated temperatures. Additionally, material properties are investigated to assess the chemical structure, Shore A Hardness, and thermal stability. Comparisons between the casted and 3D printed sensors show that the sensing devices fabricated with the advanced manufacturing technique are more efficient because the color changes are more easily detected.

scholarly journals Optical loss characterization of SEO100C electro-optic polymer within single mode rib waveguides

OSA Continuum ◽  
2019 ◽  
Vol 2 (11) ◽  
pp. 3299
Author(s):  
Evan Gawron ◽  
Michael Maurer ◽  
Christopher Middlebrook ◽  
Kevin Kellar
Keyword(s):  
Optical Loss ◽  
Single Mode ◽  
Electro Optic ◽  
Rib Waveguides
Sign in / Sign up

Export Citation Format

Share Document