Honeycomb Films of Biodegradable Polymers for Tissue Engineering

2002 ◽  
Vol 724 ◽  
Author(s):  
Takehiro Nishikawa ◽  
Keiko Arai ◽  
Junko Hayashi ◽  
Masahiko Hara ◽  
Masatsugu Shimomura
Keyword(s):  
Biodegradable Polymers ◽  
Three Dimensional ◽  
Single Layer ◽  
Amphiphilic Polymer ◽  
The Self ◽  
Double Layers ◽  
Tissue Formation ◽  
Moist Air ◽  
Flat Film ◽  
Microporous Films

AbstractWe report that microporous films (honeycomb films) can lead various types of cells to tissue formation. The honeycomb films were fabricated by applying a moist air to a spread polymer solution containing biodegradable polymers (poly(L-lactic acid) (PLLA) and poly (ε-caprolactone) (PCL)) and an amphiphilic polymer. Hepatocytes were cultured on a self-supporting honeycomb film of PLLA. The hepatocytes formed a single layer of columnar shape cells with a thickness of 20 μm. The tissue formation of hepatocytes specifically occurred on the honeycomb film of PLLA, not on a flat film of PLLA. Three dimensional tissue structures were formed, when cells were cultured on both sides of the self-supporting honeycomb film. Double layers of hepatocytes were obtained by the method. Striated tissues such as heart and blood vessel could be reconstructed by utilizing a stretched honeycomb film of PCL.

"HONEYCOMB FILMS": BIOINTERFACE FOR TISSUE ENGINEERING

2002 ◽  
Vol 01 (05n06) ◽  
pp. 415-418 ◽  
Author(s):  
TAKEHIRO NISHIKAWA ◽  
KEIKO ARAI ◽  
JUNKO HAYASHI ◽  
MASAHIKO HARA ◽  
MASATSUGU SHIMOMURA
Keyword(s):  
Tissue Engineering ◽  
Three Dimensional ◽  
Single Layer ◽  
Amphiphilic Polymer ◽  
The Self ◽  
Double Layers ◽  
Tissue Formation ◽  
Moist Air ◽  
Microporous Polymer ◽  
Flat Film

We report that tissue-like structure can be formed when cells are cultured on a microporous polymer film (honeycomb film). The honeycomb films were fabricated by applying a moist air to a spread polymer solution containing biodegradable polymers (poly(L-lactic acid) (PLLA) and poly(ε-caprolactone) (PCL)) and an amphiphilic polymer. Hepatocytes were cultured on a self-supporting honeycomb film of PLLA. The hepatocytes formed a single layer of columnar shape cells with a thickness of 20 μm. The tissue formation of hepatocytes was specifically occurred on the honeycomb film of PLLA and not on a flat film of PLLA. Three-dimensional tissue structures were formed, when cells were cultured on both sides of the self-supporting honeycomb film. Double layers of hepatocytes were obtained by the method. Striated tissues such as heart and blood vessel could be reconstructed by utilizing a stretched honeycomb film of PCL.

Three-Dimensional Microfabrication System for Biodegradable Microdevices With High-Resolution and Bio-Applicability

2005 ◽  
Author(s):  
Akira Yamada ◽  
Fuminori Niikura ◽  
Koji Ikuta
Keyword(s):  
Tensile Strength ◽  
Biodegradable Polymers ◽  
Conventional Method ◽  
Three Dimensional ◽  
Single Layer ◽  
Batch Process ◽  
Potential Applications ◽  
A Cell ◽  
The One ◽  
Almost All

Biodegradable polymers are employed in medicine and its further application is expected with eagerness. But the lack of an appropriate processing method retards the progress. To overcome this problem, we have developped a novel three-dimensional microfabrication system. The system design allows us the processing of the free three-dimensional micro-level forms by stacking up melted polymers from the nozzle. Different from the conventional method, we adopted a batch process to supply materials in order to eliminate the prior process that required toxic solvents. In addition, it is possible to handle almost all biodegradable thermoplastic resins by adopting this system. A single layer from the piled-up layers of extruded lines was observed to evaluate the resolution. The lateral and depth resolutions attained are 40 μm and 45 μm, respectively. Biodegradable polymers enable three-dimensional microstructures such as micro-pipes, micro-bends, and micro-coil springs to be manufactured in less than 15 min. The biocompatibility of the newly fabricated structure was evaluated using a cell line (PC12). For this purpose, a small vessel, with a transparent base, was fabricated using PLA and cells were cultivated in it. The results were then compared with the results obtained using the standard method. The mechanical strength of our microstructures was evaluated using a tensile strength test. The tensile strength of the microstructure was lower than the one obtained from the conventional method, but has enough strength for fabrication of medical devices. Our system renders it possible to produce toxic-free, as well as transparent and leakage-free devices. Our system is expected to have potential applications in optimum design and fabrication of implantable devices, especially in tissue engineering.

Cs3NdSi8O19 und Cs6Nd2Si21O48: Zwei cäsiumhaltige Oxosilicate des Neodyms im Vergleich / Cs3NdSi8O19 and Cs6Nd2Si21O48: Two Caesium-containing Oxosilicates of Neodymium in Comparison

2009 ◽  
Vol 64 (11-12) ◽  
pp. 1329-1338 ◽  
Author(s):  
Marion C. Schäfer ◽  
Thomas Schleid
Keyword(s):  
Solid State ◽  
Coordination Sphere ◽  
Quaternary System ◽  
Three Dimensional ◽  
Single Layer ◽  
Solid State Reactions ◽  
Double Layers ◽  
Orthorhombic Space Group ◽  
Space Group ◽  
First Case

In the quaternary system Cs / Nd / Si / O, two new representatives, the phyllo-oxosilicate Cs3NdSi8O19 and the tecto-oxosilicate Cs6Nd2Si21O48, were synthesized by CsF-flux-supported solid-state reactions between Nd2O3 and SiO2. The first one, Cs3NdSi8O19 (orthorhombic, Cmcm (no. 63), a = 705.74(5), b = 2712.85(19), c = 1163.72(8) pm, Z = 4), is not isotypic to the related scandium compound Cs3ScSi8O19. The [SiO4]4− tetrahedra (d(Si4+ -O2−) = 156 -163 pm) in the structure of Cs3NdSi8O19 are connected via common corners to form corrugated, loop-branched double layers containing four- and eight-membered rings in the (010) plane and eight-membered rings along [001]. Each of the eight-membered ellipses emerging along [100] is additionally loopbranched by two four-membered chains. The oxosilicate double layers are cross-linked by vertexsharing via otherwise isolated [NdO6]9− octahedra (d(Nd3+-O2-)= 232 - 234 pm) to build up a three-dimensional framework. Also in between the oxosilicate double layers, the (Cs1)+ cations are located on the 8 f site. Each of the octagonal channels along [001] hosts one (Cs3)+ and two (Cs2)+ cations, which both reside at only partially occupied sites (8g and 8 f , respectively) and disorder, because otherwise too short Cs+ ・ ・ ・ Cs+ distances would occur. The second compound, Cs6Nd2Si21O48, crystallizes also in an orthorhombic space group (Pmmn (no. 59), a = 2189.24(15), b = 731.92(5), c = 1593.61(11) pm, Z = 2). Starting from a loop-branched single layer containing five- and eight-membered rings, a three-dimensional framework of vertex-shared [SiO4]4− tetrahedra (d(Si4+-O2−) = 149 - 164 pm) built up, in which the Si-O distances range from 149 to 164 pm within a broad range. In certain cavities, one kind of Nd3+, but four kinds of Cs+ cations (here, all sites with full occupation) are embedded. Also surrounded by only six O2− anions just like in the first case, the Nd3+ cations (d(Nd3+-O2−) = 233 - 237 pm) exhibit an unusually small, but not unknown coordination sphere for this relatively large lanthanoid(III) cation

scholarly journals The crystal structure of naujakasite, a double sheet silicate

1975 ◽  
Vol 116 ◽  
pp. 11-24
Author(s):  
R Basso ◽  
A Dal Negro ◽  
A Della Giusta ◽  
L Ungaretti
Keyword(s):  
Crystal Structure ◽  
Least Squares Method ◽  
Three Dimensional ◽  
Single Layer ◽  
Structural Formula ◽  
Double Layers ◽  
Cell Dimensions ◽  
Sheet Silicate ◽  
Computer Controlled ◽  
Oxygen Atoms

The crystal structure of naujakasite from Tuperssuatsiait has been determined by X-ray data from four-circle computer controlled Philips PW 1100 diffractometer (Mo Kα radiation). Naujakasite crystallizes in the space group C2/m with cell dimensions a = 15.025(1), b = 7.991(2), c = 10.486(1) Å, β = 113°40'(5'); the structural formula is Na6FeAl4Si8O26, Z = 2. The structure has been solved by Patterson methods and refined by full matrix least-squares method to Rw = 0.027. Naujakasite is a sheet silicate with double layers of tetrahedra perpendicular to the c direction. All the oxygen atoms of the structure are shared between two tetrahedra except one that interrupts the three-dimensional linking. Each single layer is formed by rings of six tetrahedra and the linkage between two single layers gives rise to rings of four and six tetrahedra. Out of the three independent tetrahedral sites present in the structure one is occupied by silicon and the other two by (0.5 Si + 0.5 AI). The Na-O polyhedra (quite irregular) and the Fe-O polyhedron (a tetragonal bipyramid) are all linked together forming a three-dimensional framework in which all the oxygen atoms of the structure are involved.

Characterization of a monolayer graphitic structure

1994 ◽  
Vol 52 ◽  
pp. 760-761
Author(s):  
X. Lin ◽  
X. K. Wang ◽  
V. P. Dravid ◽  
J. B. Ketterson ◽  
R. P. H. Chang
Keyword(s):  
Three Dimensional ◽  
Single Layer ◽  
Synthesis Process ◽  
Graphitic Structure ◽  
Positive Gaussian Curvature ◽  
Graphitic Sheet ◽  
Structural And Electronic Properties ◽  
New Material ◽  
Hexagonal Network

For small curvatures of a graphitic sheet, carbon atoms can maintain their preferred sp2 bonding while allowing the sheet to have various three-dimensional geometries, which may have exotic structural and electronic properties. In addition the fivefold rings will lead to a positive Gaussian curvature in the hexagonal network, and the sevenfold rings cause a negative one. By combining these sevenfold and fivefold rings with sixfold rings, it is possible to construct complicated carbon sp2 networks. Because it is much easier to introduce pentagons and heptagons into the single-layer hexagonal network than into the multilayer network, the complicated morphologies would be more common in the single-layer graphite structures. In this contribution, we report the observation and characterization of a new material of monolayer graphitic structure by electron diffraction, HREM, EELS.The synthesis process used in this study is reported early. We utilized a composite anode of graphite and copper for arc evaporation in helium.

Cracking at the fold in double layer coated paper: the influence of latex and starch composition

TAPPI Journal ◽  
2019 ◽  
Vol 18 (2) ◽  
pp. 93-99
Author(s):  
SEYYED MOHAMMAD HASHEMI NAJAFI ◽  
DOUGLAS BOUSFIELD, ◽  
MEHDI TAJVIDI
Keyword(s):  
Mechanical Properties ◽  
Double Layer ◽  
Starch Content ◽  
Single Layer ◽  
Double Layers ◽  
Coated Paper ◽  
Coated Papers ◽  
Coating Layers ◽  
Scanned Images ◽  
Packaging Paper

Cracking at the fold of publication and packaging paper grades is a serious problem that can lead to rejection of product. Recent work has revealed some basic mechanisms and the influence of various parameters on the extent of crack area, but no studies are reported using coating layers with known mechanical properties, especially for double-coated systems. In this study, coating layers with different and known mechanical properties were used to characterize crack formation during folding. The coating formulations were applied on two different basis weight papers, and the coated papers were folded. The binder systems in these formulations were different combinations of a styrene-butadiene latex and mixtures of latex and starch for two different pigment volume concentrations (PVC). Both types of papers were coated with single and double layers. The folded area was scanned with a high-resolution scanner while the samples were kept at their folded angle. The scanned images were analyzed within a constant area. The crack areas were reported for different types of papers, binder system and PVC values. As PVC, starch content, and paper basis weight increased, the crack area increased. Double layer coated papers with high PVC and high starch content at the top layer had more cracks in comparison with a single layer coated paper, but when the PVC of the top layer was low, cracking area decreased. No measurable cracking was observed when the top layer was formulated with a 100% latex layer.

Nanoscale Self-Assembly Using Ion and Electron Beam Techniques: A Rapid Review

MRS Advances ◽  
2020 ◽  
Vol 5 (64) ◽  
pp. 3507-3520
Author(s):  
Chunhui Dai ◽  
Kriti Agarwal ◽  
Jeong-Hyun Cho
Keyword(s):  
Electron Beam ◽  
Self Assembly ◽  
Ion Beam ◽  
Three Dimensional ◽  
The Self ◽  
Stress Generation ◽  
Rapid Review ◽  
High Yield ◽  
3D Nanostructures ◽  
Self Assembled

AbstractNanoscale self-assembly, as a technique to transform two-dimensional (2D) planar patterns into three-dimensional (3D) nanoscale architectures, has achieved tremendous success in the past decade. However, an assembly process at nanoscale is easily affected by small unavoidable variations in sample conditions and reaction environment, resulting in a low yield. Recently, in-situ monitored self-assembly based on ion and electron irradiation has stood out as a promising candidate to overcome this limitation. The usage of ion and electron beam allows stress generation and real-time observation simultaneously, which significantly enhances the controllability of self-assembly. This enables the realization of various complex 3D nanostructures with a high yield. The additional dimension of the self-assembled 3D nanostructures opens the possibility to explore novel properties that cannot be demonstrated in 2D planar patterns. Here, we present a rapid review on the recent achievements and challenges in nanoscale self-assembly using electron and ion beam techniques, followed by a discussion of the novel optical properties achieved in the self-assembled 3D nanostructures.

Simulating Self-Regeneration and Self-Replication Processes Using Movable Cellular Automata with a Mutual Equilibrium Neighborhood

2020 ◽  
Vol 29 (4) ◽  
pp. 741-757
Author(s):  
Kateryna Hazdiuk ◽  
◽  
Volodymyr Zhikharevich ◽  
Serhiy Ostapov ◽  
◽  
...  
Keyword(s):  
Cellular Automata ◽  
Cellular Automaton ◽  
Three Dimensional ◽  
Computer Models ◽  
The Self ◽  
Model Construction ◽  
Natural Phenomena ◽  
Different Types ◽  
Movable Cellular Automata ◽  
Self Replication

This paper deals with the issue of model construction of the self-regeneration and self-replication processes using movable cellular automata (MCAs). The rules of cellular automaton (CA) interactions are found according to the concept of equilibrium neighborhood. The method is implemented by establishing these rules between different types of cellular automata (CAs). Several models for two- and three-dimensional cases are described, which depict both stable and unstable structures. As a result, computer models imitating such natural phenomena as self-replication and self-regeneration are obtained and graphically presented.

scholarly journals Mastering of NIL Stamps with Undercut T-Shaped Features from Single Layer to Multilayer Stamps

Nanomaterials ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 956
Author(s):  
Philipp Taus ◽  
Adrian Prinz ◽  
Heinz D. Wanzenboeck ◽  
Patrick Schuller ◽  
Anton Tsenov ◽  
...  
Keyword(s):  
Electron Beam Lithography ◽  
Nanoimprint Lithography ◽  
Silicon Oxide ◽  
Three Dimensional ◽  
Single Layer ◽  
Fabrication Technology ◽  
Large Area ◽  
Structural Colors ◽  
Biomimetic Structures ◽  
Morpho Butterfly

Biomimetic structures such as structural colors demand a fabrication technology of complex three-dimensional nanostructures on large areas. Nanoimprint lithography (NIL) is capable of large area replication of three-dimensional structures, but the master stamp fabrication is often a bottleneck. We have demonstrated different approaches allowing for the generation of sophisticated undercut T-shaped masters for NIL replication. With a layer-stack of phase transition material (PTM) on poly-Si, we have demonstrated the successful fabrication of a single layer undercut T-shaped structure. With a multilayer-stack of silicon oxide on silicon, we have shown the successful fabrication of a multilayer undercut T-shaped structures. For patterning optical lithography, electron beam lithography and nanoimprint lithography have been compared and have yielded structures from 10 µm down to 300 nm. The multilayer undercut T-shaped structures closely resemble the geometry of the surface of a Morpho butterfly, and may be used in future to replicate structural colors on artificial surfaces.

scholarly journals Detecting the Mechanism behind the Transition from Fixed Two-Dimensional Patterned Sika Deer (Cervus nippon) Dermal Papilla Cells to Three-Dimensional Pattern

2021 ◽  
Vol 22 (9) ◽  
pp. 4715
Author(s):  
Guanning Wei ◽  
Hongmei Sun ◽  
Haijun Wei ◽  
Tao Qin ◽  
Yifeng Yang ◽  
...  
Keyword(s):  
Culture Condition ◽  
Sika Deer ◽  
Three Dimensional ◽  
Cervus Nippon ◽  
Dermal Papilla ◽  
Growth Patterns ◽  
The Self ◽  
Dermal Papilla Cells ◽  
Aggregative Behavior ◽  
Cell Pattern

The hair follicle dermal papilla is critical for hair generation and de novo regeneration. When cultured in vitro, dermal papilla cells from different species demonstrate two distinguishable growth patterns under the conventional culture condition: a self-aggregative three dimensional spheroidal (3D) cell pattern and a two dimensional (2D) monolayer cell pattern, correlating with different hair inducing properties. Whether the loss of self-aggregative behavior relates to species-specific differences or the improper culture condition remains unclear. Can the fixed 2D patterned dermal papilla cells recover the self-aggregative behavior and 3D pattern also remains undetected. Here, we successfully constructed the two growth patterns using sika deer (Cervus nippon) dermal papilla cells and proved it was the culture condition that determined the dermal papilla growth pattern. The two growth patterns could transit mutually as the culture condition was exchanged. The fixed 2D patterned sika deer dermal papilla cells could recover the self-aggregative behavior and transit back to 3D pattern, accompanied by the restoration of hair inducing capability when the culture condition was changed. In addition, the global gene expressions during the transition from 2D pattern to 3D pattern were compared to detect the potential regulating genes and pathways involved in the recovery of 3D pattern and hair inducing capability.

Sign in / Sign up

Export Citation Format

Share Document