scholarly journals Ultrasonic additive manufacturing of nanocrystalline laminated composites

2022 ◽  
Author(s):  
Austin A. Ward ◽  
Donovan N. Leonard ◽  
Hans-Henrik König ◽  
Greta Lindwall ◽  
Zachary C. Cordero
Keyword(s):  
Additive Manufacturing ◽  
Grain Growth ◽  
Laminated Composites ◽  
Pure Aluminum ◽  
Weld Interface ◽  
Process Models ◽  
Grain Structure ◽  
Processing Conditions ◽  
Ultrasonic Additive Manufacturing ◽  
Temperature Dependences

AbstractUltrasonic additive manufacturing has been used to fabricate laminated composites of commercially pure aluminum and a nanocrystalline nickel–cobalt (nc-NiCo) alloy. The nc-NiCo alloy would not weld to itself but readily welded to aluminum. Thus, by alternating between foils of nc-NiCo and Al, we achieved multi-material laminates with strong interlayer bonding. Electron microscopy showed that the nanoscale grain structure of the nc-NiCo was preserved during deposition and that the nc-NiCo/Al weld interface was decorated with comminuted surface oxides as well as Al–Ni–Co intermetallics. These findings are considered in light of process models of junction growth, interdiffusion, and grain growth, which together reveal how the different pressure- and temperature dependences of these phenomena give rise to a range of processing conditions that maximize bonding while minimizing coarsening and intermetallic formation. This analysis quantitatively demonstrates that using a soft, low melting point interlayer material decouples junction growth at the weld interface from grain growth in the nc-NiCo, expanding the range of optimal processing conditions. Graphical abstract

scholarly journals Precipitation Criterion for Inhibiting Austenite Grain Coarsening during Carburization of Al-Containing 20Cr Gear Steels

Metals ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 504
Author(s):  
Huasong Liu ◽  
Yannan Dong ◽  
Hongguang Zheng ◽  
Xiangchun Liu ◽  
Peng Lan ◽  
...  
Keyword(s):  
Grain Growth ◽  
Abnormal Grain Growth ◽  
Grain Structure ◽  
Pinning Force ◽  
Grain Coarsening ◽  
Zener Pinning ◽  
Austenite Grain ◽  
Composition Optimization ◽  
Gear Steels ◽  
Grain Growth Behavior

AlN precipitates are frequently adopted to pin the austenite grain boundaries for the high-temperature carburization of special gear steels. For these steels, the grain coarsening criterion in the carburizing process is required when encountering the composition optimization for the crack-sensitive steels. In this work, the quantitative influence of the Al and N content on the grain size after carburization is studied through pseudocarburizing experiments based on 20Cr steel. According to the grain structure feature and the kinetic theory, the abnormal grain growth is demonstrated as the mode of austenite grain coarsening in carburization. The AlN precipitate, which provides the dominant pinning force, is ripened in this process and the particle size can be estimated by the Lifshitz−Slyosov−Wagner theory. Both the mass fraction and the pinning strength of AlN precipitate show significant influence on the grain growth behavior with the critical values indicating the grain coarsening. These criteria correspond to the conditions of abnormal grain growth when bearing the Zener pinning, which has been analyzed by the multiple phase-field simulation. Accordingly, the models to predict the austenite grain coarsening in carburization were constructed. The prediction is validated by the additional experiments, resulting in accuracies of 92% and 75% for the two models, respectively. Finally, one of the models is applied to optimize the Al and N contents of commercial steel.

Toward Metamodels for Composable and Reusable Additive Manufacturing Process Models

2014 ◽  
Vol 136 (6) ◽  
Author(s):  
Paul Witherell ◽  
Shaw Feng ◽  
Timothy W. Simpson ◽  
David B. Saint John ◽  
Pan Michaleris ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Metal Powder ◽  
Manufacturing Process ◽  
Process Model ◽  
Model Development ◽  
Process Models ◽  
Powder Bed Fusion ◽  
Powder Bed ◽  
Future Work ◽  
Am Processes

In this paper, we advocate for a more harmonized approach to model development for additive manufacturing (AM) processes, through classification and metamodeling that will support AM process model composability, reusability, and integration. We review several types of AM process models and use the direct metal powder bed fusion AM process to provide illustrative examples of the proposed classification and metamodel approach. We describe how a coordinated approach can be used to extend modeling capabilities by promoting model composability. As part of future work, a framework is envisioned to realize a more coherent strategy for model development and deployment.

Recrystallization and Grain Growth during Alloy 718 Processing

2007 ◽  
Vol 539-543 ◽  
pp. 3094-3099
Author(s):  
Nho Kwang Park ◽  
Jeoung Han Kim ◽  
Jong Taek Yeom
Keyword(s):  
Grain Size ◽  
Grain Growth ◽  
Heat Treatments ◽  
Grain Structure ◽  
Alloy 718 ◽  
Compression Tests ◽  
Δ Phase ◽  
Grain Boundary Characteristics ◽  
The Difference ◽  
Boundary Characteristics

In Alloy 718 ingot cogging process, dynamic and metadynamic recrystallizations, and static grain growth occur, and also the presence of δ phase plays a key role in controlling the grain size. In this study, the evolution of grain structure in VIM/VAR-processed Alloy 718 ingots during post-cogging heat treatments is dealt with. Compression tests were made on VIM/VAR-processed Alloy 718 ingot at temperatures between 900oC ~ 1150oC. Heat treatments were made on the compression-tested specimens, and the variation of grain size was evaluated. Constitutive equations for the grain growth are established to represent the evolution of microstructures. Special attention is paid to the evolution of grain structure under the condition of dynamic and metadynamic recrystallizations, and grain growth. The grain growth rate depends mainly on the presence of δ-phase below the δ-solvus temperature, and on the difference in the grain boundary characteristics above it.

Transient thermal response in ultrasonic additive manufacturing of aluminum 3003

2011 ◽  
Vol 17 (5) ◽  
pp. 369-379 ◽  
Author(s):  
David Schick ◽  
Sudarsanam Suresh Babu ◽  
Daniel R. Foster ◽  
Marcelo Dapino ◽  
Matt Short ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Thermal Response ◽  
Ultrasonic Additive Manufacturing ◽  
Transient Thermal ◽  
Transient Thermal Response

Thermomechanical Behavior of Low CTE Metal-Matrix Composites Fabricated Through Ultrasonic Additive Manufacturing

2012 ◽  
Author(s):  
Ryan Hahnlen ◽  
Marcelo J. Dapino
Keyword(s):  
Shear Strength ◽  
Additive Manufacturing ◽  
Metal Matrix Composites ◽  
Metal Matrix ◽  
Volume Fraction ◽  
Large Strain ◽  
Matrix Composites ◽  
Interface Shear ◽  
Mechanical Coupling ◽  
Ultrasonic Additive Manufacturing

Shape memory and superelastic NiTi are often utilized for their large strain recovery and actuation properties. The objective of this research is to utilize the stresses generated by pre-strained NiTi as it is heated in order to tailor the CTE of metal-matrix composites. The composites studied consist of an Al 3003-H18 matrix with embedded NiTi ribbons fabricated through an emerging rapid prototyping process called Ultrasonic Additive Manufacturing (UAM). The thermally-induced strain of the composites is characterized and results show that the two key parameters in adjusting the effective CTE are the NiTi volume fraction and prestrain of the embedded NiTi. From the observed behavior, a constitutive composite model is developed based constitutive SMA models and strain matching composite models. Additional composites were fabricated to characterize the NiTi-Al interface through EDS and DSC. These methods were used to investigate the possibility of metallurgical bonding between the ribbon and matrix and determine interface shear strength. Interface investigation indicates that mechanical coupling is accomplished primarily through friction and the shear strength of the interface is 7.28 MPa. Finally, using the developed model, a composite was designed and fabricated to achieve a near zero CTE. The model suggests that the finished composite will have a zero CTE at a temperature of 135°C.

Sign in / Sign up

Export Citation Format

Share Document