scholarly journals EDUKASI TEKNOLOGI PANEL SURYA SEBAGAI SUMBER ENERGI LISTRIK AQUAPONIK DI KELURAHAN TANJUNG PALAS KOTA DUMAI

Al-Khidmat ◽  
2021 ◽  
Vol 4 (2) ◽  
pp. 86-93
Author(s):  
Bobby Demeianto ◽  
Rizqi Ilmal Yaqin ◽  
Muhammad Nur Arkham ◽  
Bambang Imawan ◽  
Kenny Bastian ◽  
...  
Keyword(s):  
Solar Energy ◽  
Electrical Energy ◽  
Educational Activity ◽  
Solar Panels ◽  
The People ◽  
Level Of Satisfaction ◽  
Main Components ◽  
Level Of Understanding ◽  
Alternative Solutions

The source of electrical energy is one of the main components in everyday life. The development of technology today requires all people to be able to take advantage of renewable energy, one of which is solar energy. The solar panel is an energy conversion machine that can produce electrical energy. Coastal communities have an abundance of solar energy sources that can be utilized by solar panels as alternative electrical energy in the aquaponics system that has been built. The majority of the people of Tanjung Palas Village, Dumai City, are fishermen. So that there is a need for additional economic income besides being a fisherman. On the other hand, the community still does not understand the operation and maintenance of solar panels due to knowledge problems. Therefore education and the installation of solar panels as a source of aquaponic electricity are alternative solutions offered to the community. The educational activity of solar panels as a source of aquaponic electricity is carried out in collaboration with CSR PT Pertamina RU II Dumai with the Dumai Marine and Fisheries Polytechnic. The result of this activity is that the level of understanding of participants from per category always increases. The knowledge category increased from 39% of participants to 93% of participants, the operating category increased from 14% of participants to 94% and the care category increased from 14% of participants to 95% of participants. In addition, the level of satisfaction of the participants shows that 25% of participants are very satisfied and 75% of participants are satisfied with this activity. Recommendations for the results of activities that have been carried out are that there is a need for follow-up activities so that the community can better utilize solar panels as alternative electrical energy.

scholarly journals Electrical system design of solar powered electrical recreational boat for Indonesian waters

2018 ◽  
Vol 67 ◽  
pp. 04011
Author(s):  
Sunaryo Sunaryo ◽  
Adri Wirawan Ramadhani
Keyword(s):  
Solar Energy ◽  
Fossil Fuel ◽  
Electrical Power ◽  
Electrical Energy ◽  
Green Energy ◽  
Solar Panels ◽  
Electrical System ◽  
Literature Study ◽  
The Government ◽  
Solar Powered

Indonesia has more than 17,000 islands and has plenty of beautiful beaches and underwater spots which have great potential for maritime tourism. Tourism was ranked 3rd on Indonesia's foreign income and plays an important role for the country’s ecomony. Despite having potential advantages, the government has not yet maximized its efforts to develop the attractiveness of its maritime tourism. Beside the beautiful spots Indonesia is also blessed with all year long sun shine, which could be tapped as renewable and green energy as substitution to fossil fuel. Refer to these great advantages of natural resources the research was aimed to support the government’s program in developing its maritime tourism and to promote the use of green and renewable energy by designing a solar-powered tourism recreational boat which has 12 meters of length. The paper is focused on the design of solar energy and its electrical system, which includes conversion of solar energy to electrical energy and store it in the battery, the required electrical power is also predicted based on the appliances and equipment installed in the boat, the optimum attachment of solar panels on the boat structure is also calculated. All the methods and information we use are obtained from literature study, discussion with experts, and surveys to Jagur as solar-powered electric boat from Universitas Indonesia.

scholarly journals ANÁLISE DOS PARÂMETROS PARA GERAÇÃO DE ENERGIA SOLAR FOTOVOLTAICA NO ACRE, BRASIL

2021 ◽  
Vol 7 (20) ◽  
pp. 202129
Author(s):  
Vivyane Alencar Marques Araújo do Nascimento ◽  
Taynara Bastos Trindade ◽  
Clarice Maia Carvalho
Keyword(s):  
Solar Energy ◽  
Electrical Energy ◽  
Energy Generation ◽  
Photovoltaic Cell ◽  
Solar Irradiation ◽  
Solar Panels ◽  
Cell Temperature ◽  
Photovoltaic Efficiency ◽  
Photovoltaic Solar Energy ◽  
Insolation Maximum

ANALYSIS OF PARAMETERS FOR PHOTOVOLTAIC SOLAR ENERGY GENERATION IN ACRE, BRAZILANÁLISIS DE PARÁMETROS PARA LA GENERACIÓN DE ENERGÍA SOLAR FOTOVOLTAICA EN ACRE, BRASILRESUMOEnergia solar é obtida através de placas solares fotovoltaicas com a função de captar a energia do sol e transformar em energia elétrica, aumentando a geração de energia solar nas regiões com maior captação de energia luminosa. Assim, neste artigo analisou-se os parâmetros para geração de energia solar fotovoltaica no Acre, Brasil. Coletou-se dados referentes a insolação, temperaturas máximas e mínimas, precipitação e umidade relativa no Instituto Nacional de Meteorologia, irradiação solar, no Centro de Referências para Energias Solar e Eólica Sérgio de S. Brito, regionais do Vale do Juruá e Vale do Acre, no período de 2015-2020. As análises foram quantitativas, utilizando o cálculo da média e cálculo do plano inclinado. Na comparação das regionais, o Vale do Acre apresentou melhores resultados para geração de energia solar e com um ângulo com a maior média diária anual de irradiação solar, considerando-se projetar-se células fotovoltaicas na regional. O trabalho apresenta que o Acre possui bastante insolação e irradiação solar, indicando alto potencial de geração de energia solar para as regionais do estado.Palavras-chave: Eficiência Fotovoltaica; Radiação Solar; Temperatura da Célula Fotovoltaica; Irradiação.ABSTRACTSolar energy is obtained through photovoltaic solar panels with the function of capturing the sun's energy and transforming it into electrical energy, increasing the generation of solar energy in regions with greater capture of light energy. Thus, the parameters for the generation of photovoltaic solar energy in Acre, Brazil were analyzed. Data on insolation, maximum and minimum temperatures, precipitation and relative humidity were collected at the National Institute of Meteorology, solar irradiation, at the Reference Center for Solar and Wind Energy Sérgio de S. Brito, regions of Vale do Juruá and Vale do Acre, in the period 2015-2020. Analyzes were quantitative, using mean calculation and inclined plane calculation. When comparing the regions, Vale do Acre presented better results for solar energy generation and with an angle with the highest annual daily average of solar irradiation, considering the project of photovoltaic cells in the region. The work shows that Acre has a lot of insolation and solar irradiation, indicating a high potential for generating solar energy for the regional regions of the state.Keywords: Photovoltaic Efficiency; Solar Radiation; Photovoltaic Cell Temperature; Irradiation.RESUMENLa energía solar se obtiene a través de paneles solares fotovoltaicos con la función de captar la energía del sol y transformarla en energía eléctrica, aumentando la generación de energía solar en las regiones con mayor captación de energía luminosa. Así, se analizaron los parámetros para la generación de energía solar fotovoltaica en Acre, Brasil. Los datos sobre insolación, temperaturas máximas y mínimas, precipitación y humedad relativa fueron recolectados en el Instituto Nacional de Meteorología, irradiación solar, en el Centro de Referencia de Energía Solar y Eólica Sérgio de S. Brito, regiones de Vale do Juruá y Vale do Acre, en el período 2015-2020. Los análisis fueron cuantitativos, utilizando cálculo de medias y cálculo de plano inclinado. Al comparar las regiones, Vale do Acre presentó mejores resultados para la generación de energía solar y con un ángulo con el promedio diario anual más alto de irradiación solar, considerando el diseño de células fotovoltaicas en la región. El trabajo muestra que Acre tiene mucha insolación e irradiación solar, lo que indica un alto potencial de generación de energía solar para las regiones regionales del estado.Palabras clave: Eficiencia Fotovoltaica; Radiación Solar; Temperatura de la Celda Fotovoltaica; Irradiación.

scholarly journals Analisis Kemampuan Panel Surya Monokristalin 150 Watt pada Arus dan Pengisian yang Dihasilkan

2019 ◽  
Vol 3 (1) ◽  
pp. 29-35
Author(s):  
M Barkah Salim ◽  
Nurlaila Rajabiah
Keyword(s):  
Data Collection ◽  
Solar Energy ◽  
Research Method ◽  
Electrical Energy ◽  
The Sun ◽  
Solar Panels ◽  
Open Area ◽  
A Priority ◽  
The Many

The sun is a source of energy that cannot be used up. Therefore, the utilization of solar energy must be a priority. With the many types of solar panels that have been developed, researchers conducted an analysis of 150 watt monocrystalline solar panels. The purpose of this study is to know the amount of current and voltage produced by solar panels in some conditions of the sky, namely cloudy, bright cloudy, and bright. The research method used was the experiment. From the data that has been obtained, it can be found that the energy produced by solar panels during cloudy ranges from 0.6-0.8 amperes, when it is cloudy, 0.9-1.9 amperes, and when bright 2.0-3.2 amperes. The amount of electrical energy that can be produced is 8%. However, if the sunny state can produce twice that Suggestions for readers are if you want to take data to make sure the solar panels are completely exposed to the sun during data collection and in the open area. Much better if the angle is adjusted in the direction of sunlight.

scholarly journals Analisis Perancangan dan Pengujian Alat Cuci Tangan Otomasis Berbasis Energi Surya 100 WP

2021 ◽  
Vol 2 (1) ◽  
pp. 14-21
Author(s):  
Heri Suripto ◽  
Unggul Satria Jati
Keyword(s):  
Solar Energy ◽  
Material Selection ◽  
Electrical Energy ◽  
Input Power ◽  
Solar Panel ◽  
Second Phase ◽  
Power Requirement ◽  
Solar Module ◽  
The People ◽  
Solar Radiation Intensity

The outbreak of the Covid 19 disease has caused disaster to the people. The emergence of this disease’s outbreak encourages the importance clean lifestyle. In order not to easily contracted the Covid 19 disease, it is necessary to make automatic handwashing equipment to prevent people from having direct contact with the equipment. In this research the design and testing of an automatic handwashing equipment based on solar energy were carried out. The purpose of this research was to determine the capacity of the sun's intensity to provide electrical energy through the solar module to the battery which will be used to supply electrical energy of solar energy-based automatic handwashing equipment. The method used in this research was the Palh and Beitz method approach and the experimental method which started with the design, material selection, assembly and testing. The design produced equipment specifications for a solar module framework with a height of 100 cm, a width of 80 cm, a length of 100 cm, while for a sink frame with a height of 90 cm, a width of 45 cm, and a length of 55 cm. The test was carried out in three phases, phase one was testing the module input power. The module input power in the test produced a power of 2461 Watts with a solar radiation intensity of 3237 W / m2. The peak intensity and power of the sun was shown at 13.00 WIB. The second phase of the test was the length of time needed to charge the battery took 2.5 hours. The third phase of the test was the power needed for sensors and pumps of 358 Watts. The power requirement of 358 Watts could be supplied by a 100 Wp solar panel, since the power released from a 100 Wp solar panel is 400 Watts.

scholarly journals Solar Tracking System Untuk Lampu Taman STMIK AUB Surakarta Berbasis Arduino Uno

2018 ◽  
Vol 24 (2) ◽  
pp. 134
Author(s):  
Robby Rachmatullah ◽  
Dessyana Kardha ◽  
Dani Triwiyanto
Keyword(s):  
Solar Energy ◽  
Fossil Fuels ◽  
Tracking System ◽  
Electrical Energy ◽  
Energy Sources ◽  
Solar Panels ◽  
Turn On ◽  
Solar Tracking ◽  
Arduino Uno ◽  
To Receive

The transfer of electrical energy sources from non-renewable fossil fuels to alternative renewable fuels can be made by utilizing solar energy. The working system of arduino uno solar tracking system for STMIK AUB garden lights is by capturing solar energy through solar panels which are then stored inside the battery where the charging process is controlled by solar charge controller. LDR functions to receive and identify the radiated light quantities which are then forwarded into the arduino uno and processed to drive the DC motor that has become one with the solar panel. If the day begins to darken the LDR will inform the arduino uno and then it will be processed by arduino uno to turn on the DC light.

scholarly journals OPTIMALISASI PENERIMAAN INTENSITAS CAHAYA MATAHARI PADA PERMUKAAN PANEL SURYA (SOLAR CELL) MENGGUNAKAN CERMIN

2020 ◽  
Vol 5 (2) ◽  
pp. 108-117
Author(s):  
Soni A Kaban ◽  
Muhamad Jafri ◽  
Gusnawati Gusnawati
Keyword(s):  
Solar Cell ◽  
Solar Energy ◽  
Experimental Method ◽  
Electrical Energy ◽  
Solar Panel ◽  
Solar Panels ◽  
Research Material ◽  
Voltage Output ◽  
Flat Mirror ◽  
A Current

Abstrak Energi surya merupakan salah satu energi yang bias dikonversi menjadi energi listrik dengan menggunakan panel surya (photovoltaic solar). Pada penelitian ini, dirancang panel surya dengan cermin datar sebagai reflektor scanning dengan empat buah reflektor pada empat sisi panel surya. Tujuan yang ingin dicapai dalam penelitian ini yaitu untuk mendapatkan keluaran panel surya yang optimal menggunakan cemin sebagai media reflektornya dan mendapatkan konfigurasi penempatan cermin untuk meningkatkan keluaran arus dan tegangan panel surya. Metode yang digunakan dalam penelitian ini adalah metode eksperimen dengan melakukan percobaan terhadap objek bahan penelitian dengan kemiringan reflektor cermin 30o, 45o, dan 60o. Dengan penambahan reflector cermin pada panel surya menyebabkan peningkatan keluaran panel surya pada pukul 12.00 Wita. Panel tanpa reflektor mengahasilkan Arus 2,1 Ampere, Tegangan 6,52 Volt. Panel reflektor 30o menghasilkan Arus 1,89 Ampere, Tegangan 6,25 Volt, Panel reflektor 45o, Arus 2,33 Ampere, Tegangan 6,15 Volt dan Panel reflektor Arus 3,02 Ampere, dan Tegangan 6,41 Volt.Kata kunci: Energi; fotovoltaik; panel surya; cermin. Abstract Solar energy is one of the energies that can be converted into electrical energy using solar panels (photovoltaic solar). In this study, a solar panel with a flat mirror as a scanning reflector was designed with four reflectors on the four sides of the solar panel. The objectives to be achieved in this study are to obtain optimal solar panel output using the mirror as a reflector medium and obtain a mirror placement configuration to increase the current and voltage output of the solar panels. The method used in this research is an experimental method by conducting experiments on the object of the research material with a mirror reflector tilt of 30o, 45o, and 60o. With the addition of a mirror reflector on the solar panel, it causes an increase in the output of the solar panel at 12.00 GMT+08. The panel without a reflector produces a current of 2.1 Ampere, a voltage of 6.52 volts. The 30o-reflector panel produces a current of 1.89 Amperes, a Voltage of 6.25 Volts, a 450 Reflector Panel, a Current of 2.33 Amperes, a Voltage of 6.15 Volts and a Current 3.02 Amperes of Reflector Panel, and a Voltage of 6.41 Volts. Keywords: Energy; photovoltaic; solar panel; mirror

scholarly journals Penggunaan Pembangkit Listrik Tenaga Surya Sebagai Sumber Energi Pada Kapal Nelayan: Suatu Kajian Literatur

2020 ◽  
Vol 4 (2) ◽  
pp. 101
Author(s):  
I Made Aditya Nugraha
Keyword(s):  
Solar Energy ◽  
Environmental Sustainability ◽  
Power Plants ◽  
Positive Impact ◽  
Electrical Energy ◽  
Electrical Equipment ◽  
Health Economy ◽  
Solar Panels ◽  
Scientific Publications ◽  
Alternative Source

The need of electricity in every ship are very diverse. Power plants for using diesel as an engine can also come from sunlight as an alternative source of electrical energy. The measurement of solar energy in Indonesia is 4.8 kWh /m2. This renewable energy is in suitable for the Indonesian topography. Thus, the energy from the sunlight around the equator is so abundant that its availability is always available throughout the year, except when it rains. Utilization of solar energy can be used as a substitute for conventional energy which is starting to be limited and the price is quite expensive. Therefore, the data that are presented in this paper comes from publications, manufacturers, relevant official government documents, scientific publications and other publications. Utilization of solar energy as electrical energy can be done by using solar panels mounted in ships. The generated electricity can be used to turn on electrical equipment and send lights at night, and can be used as fishing aids. The use of solar power plant can also have a positive impact on fishermen, such as improving health, economy, environmental sustainability, and building independent fishermen.

scholarly journals Resistance and Stability Analysis for Catamaran Fishing Vessel with Solar Cell in Calm Water

2018 ◽  
Vol 159 ◽  
pp. 01059
Author(s):  
Teguh Putranto ◽  
Wasis Dwi Aryawan ◽  
Hesty Anita Kurniawati ◽  
Dony Setyawan ◽  
Sri Rejeki Wahyu Pribadi
Keyword(s):  
Solar Cell ◽  
Solar Energy ◽  
Electrical Energy ◽  
Limited Range ◽  
Solar Panels ◽  
Fishing Vessel ◽  
Light Load ◽  
Calm Water ◽  
Hull Design ◽  
Energy Efficiency Design Index

The use of solar cell as the moving force for the ship's tour seems to be an important theme in action to create a sea transportation that is environmentally friendly as contribution of the Energy Efficiency Design Index (EEDI) for the decrease of pollutant levels. The electrical energy produced by solar cell is not as much energy from fuels so that the solar energy powered ship that can only be followed with a limited range and speed. This type of multi hull design like catamaran that has two symmetrical hull which is possible to have an more expansive main deck, small boat boundaries and good stability. The ship deck shape is going to contribute the extension of solar panels that can be used as a generator of power needed at the time of calculation of powering the ship. The analysis of the stability of the ship carried out numerically bu using references from the IMO regulations which require minimum value stability arm at certain angles. Load cases are definitely varied in 2 (two) conditions and compared in full and light load. The goal of this research is catamaran fishing vessel that have battery, solar panel, electric motor and all of supporting solar energy moving with speed 5 knots.

scholarly journals Perhitungan Kebutuhan Daya Listrik untuk Penggerak Perahu Nelayan Bertenaga Surya

CYCLOTRON ◽  
2020 ◽  
Vol 3 (1) ◽  
Author(s):  
Radiratu K ◽  
Belly Yan Dewantara
Keyword(s):  
Free Energy ◽  
Renewable Energy ◽  
Solar Energy ◽  
Electric Energy ◽  
Electrical Energy ◽  
Energy System ◽  
Energy Requirements ◽  
Solar Panels ◽  
Fishing Boat ◽  
Body Design

Abstrak - Perahu merupakan salah satu armada yang digunakan para nelayan untuk mencari mata pencaharian. Namun pada umumnya pada saat perahu nelayan beropesi mengandalkan bahan bakar sebagai penggerak kapal, hal ini sangatlah tidak menguntungkan mengingat harga bahan bakar semakin mahal. Pada penelitian ini akan membahas desain dan perhitungan daya listrik penggerak perahu nelayan dimana enegi listrik didapat dari energi surya. Dengan adanya sistem pemanfaatan energi surya ini akan menghemat pengeluaran nelayan bahkan bisa dikatakan bahwa energi ini merupakan energi cuma-cuma atau gratis. Pada penelitian ini akan dihitung desain bodi perahu dengan kapasitas 2-3 orang, perhitungan kebutuhan alat penggerak, perhitungan kebutuhan energi listrik dan perhitungan panel surya yang akan digunakan. Hasil dari penelelitian ini dapat dijadikan kajian untuk pengembangan perahu ramah lingkungan, ekonomis, dan pemanfatan enegi surya yang merupakan energi terbarukan. Kapal yang dirancang mempunyai dimensi 3 meter dan lebar 1,33 meter dengan kecepatan 3-4 knot dan menggunakan panel surya dengan spesifikasi 150Wp sebanyak 3 buah.Kata kunci: perahu nelayan, energi penggerak kapal, panel surya, energi terbarukan, MPPTAbstract—Boat is one of the fleets that fishermen use livelihoods. But in general, when fishing boats oppose relying on fuel as a boat propeller, this is very unprofitable given the increasingly expensive. In this study will discuss the design and calculation of electric power driving a fishing boat where the electric energy is obtained from solar energy. Solar energy system will save fishermen's expenses. It can even be said that this energy is free energy. In this study the boat body design will be design with a capacity of 2-3 people, calculation of propulsion requirements, calculation of electrical energy requirements and calculation of solar panels to be used. The results of this research can be used as a study for the development of environmentally friendly, economical boats and the utilization of solar energy which is renewable energy. The ship was designed to have dimensions of 3 meters and 1.33 meters wide with a speed of 3-4 knots and uses 3 solar panels with capasity 150Wp.Keywords: fishing boat, boat propulsion energy, solar panel, renewable energy, MPPT

scholarly journals Design and Implementation of Solar Tree

2019 ◽  
Vol 8 (12S) ◽  
pp. 180-182
Keyword(s):  
Solar Energy ◽  
Energy Production ◽  
Electrical Energy ◽  
The Sun ◽  
Solar Panels ◽  
Design And Implementation ◽  
The Earth ◽  
Sufficient Energy ◽  
The World ◽  
Enormous Amount

The paper is related to the solar energy power generation, more specifically the paper revolves around the topic of solar tree. This paper shows how efficient and important is the solar tree for this generation. This presents how solar trees converts the solar energy into electrical energy. Sunlight irradiates daily and blasts out an enormous amount of solar energy towards the earth, the total energy that is received from the sun is more than enough for humanity to run for many years, still the received solar energy is not harnessed properly and hence there is not sufficient energy production in the world. Since solar panels are the efficient method nowadays for generating electrical energy from the solar energy, but solar panels requires lot of space to install. Hence this paper solve this problem by using solar tree that is mounting of solar panels on artificial tree..

Sign in / Sign up

Export Citation Format

Share Document