scholarly journals Devising a method for calculating the turboshaft gas turbine engine performance involving a blade-by-blade description of the multi-stage compressor in a two-dimensional setting

2021 ◽  
Vol 4 (8(112)) ◽  
pp. 59-66
Author(s):  
Ludmila Boyko ◽  
Vadym Datsenko ◽  
Aleksandr Dyomin ◽  
Nataliya Pizhankova
Keyword(s):  
Experimental Data ◽  
Mathematical Model ◽  
Gas Turbine ◽  
Engine Performance ◽  
Gas Turbine Engine ◽  
Turbine Engines ◽  
Gas Turbine Engines ◽  
Two Dimensional ◽  
Turbine Engine ◽  
Calculation Results

The design and adjustment of modern gas turbine engines significantly rely on the use of numerical research methods. This paper reports a method devised for calculating the thermogasdynamic parameters and characteristics of a turboshaft gas turbine engine. The special feature of a given method is a two-dimensional blade-by-blade description of the compressor in the engine system. Underlying the calculation method is a nonlinear mathematical model that makes it possible to describe the established processes occurring in individual nodes and in the engine in general. To build a mathematical model, a modular principle was chosen, involving the construction of a system of interrelated and coordinated models of nodes and their elements. The approach used in modeling a two-dimensional flow in the compressor makes it possible to estimate by calculation a significant number of parameters that characterize its operation. With the help of the reported method, it is possible to estimate the effect of changing the geometric parameters of the compressor height on the characteristics of the engine. To take into consideration the influence of variable modes of air intake or overflow in various cross-sections along the compressor tract, to determine the effect of the input radial unevenness on the parameters of the compressor and engine in general. To verify the method described, the calculation of thermogasdynamic parameters and throttle characteristics of a single-stage turboshaft gas turbine engine with a 12-stage axial compressor was performed. Comparison of the calculation results with experimental data showed satisfactory convergence. Thus, the standard deviation of the calculation results from the experimental data is 0.45 % for the compressor characteristics, 0.4 % for power, and 0.15 % for specific fuel consumption. Development and improvement of methods for calculating the parameters and characteristics of gas turbine engines make it possible to improve the quality of design and competitiveness of locally-made aircraft engines.

scholarly journals Development of Gas Turbines for Road Vehicles

1957 ◽  
Author(s):  
A. Carelli
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Engine Performance ◽  
Road Transport ◽  
Gas Turbine Engine ◽  
Turbine Engines ◽  
Gas Turbine Engines ◽  
Turbine Engine ◽  
Operational Characteristics ◽  
Design Construction

The experience acquired in developing an automotive gas-turbine engine is traced. Problems of design, construction, and development unique to a small gas-turbine engine and its application to an automobile are discussed. The engine performance and operational characteristics are then described. Finally, there is a discussion of the problems that must be solved before gas-turbine engines may successfully compete with reciprocating engines in automotive road transport.

scholarly journals The impact of physico-chemical properties of the jet fuel and biofuels on the characteristics of gas-turbine engines

2019 ◽  
Vol 22 (6) ◽  
pp. 8-16
Author(s):  
Sh. Ardeshiri
Keyword(s):  
Mathematical Model ◽  
Gas Turbine ◽  
Alternative Fuels ◽  
Gas Turbine Engine ◽  
Jet Fuel ◽  
Civil Aviation ◽  
Turbine Engines ◽  
Gas Turbine Engines ◽  
Turbine Engine ◽  
The Impact

The current development trend of global civil aviation is the growth of passenger and freight traffic, which entails the consumption of jet fuel. Under these conditions, increasing the efficiency of jet fuel used is of great importance. Global energy consumption is constantly growing, and, first of all, the question of diversification of oil resources arises, resources from which the bulk of motor fuels is produced. Other types of raw energy sources (natural gas, coal, bio-mass) currently account for only a small part. However, an analysis of the development of jet fuels indicates that work is underway to obtain these from other sources of raw materials, especially bio-fuels. Much attention is given to obtaining bio-fuels from renewable sources – such as algae. The issue of the mass transition of civil aviation to alternative fuels is complex and requires the solution of intricate technical as well as economic issues. One of these is the assessment of the impact of new fuels on GTE performance. It is important to give an objective and quick assessment of the use of various types of fuels on the main characteristics of the engine – i.e., throttle and high-speed characteristics. In this case, it is necessary to take into account chemical processes in the chemical composition of new types of fuel. To assess the effect of fuels on the characteristics of a gas turbine engine, it is proposed to use a mathematical model that would take into account the main characteristics of the fuel itself. Therefore, the work proposes a mathematical model for calculating the characteristics of a gas turbine engine taking into account changes in the properties of the fuel itself. A comparison is made of the percentage of a mixture of biofuels and JetA1 kerosene, as well as pure JetA1 and TC-1 kerosene. The calculations, according to the proposed model, are consistent with the obtained characteristics of a gas turbine engine in operation when using JetA1 and TC-1 kerosene. Especially valuable are the obtained characteristics of a gas turbine engine depending on a mixture of biofuel and kerosene. It was found that a mixture of biofuel and kerosene changes the physicochemical characteristics of fuel and affects the change in engine thrust and specific fuel consumption. It is shown that depending on the obtained physicochemical properties of a mixture of biofuel and kerosene, it is possible to increase the fuel efficiency and environmental friendliness of the gas turbine engines used.

Design, Development and Application of Vehicle Gas Turbine Engines

1966 ◽  
Vol 181 (1) ◽  
pp. 149-172
Author(s):  
P. A. Phillips ◽  
Peter Spear
Keyword(s):  
Gas Turbine ◽  
Gas Turbines ◽  
Low Cost ◽  
Engine Performance ◽  
Turbine Engines ◽  
Gas Turbine Engines ◽  
Design Development ◽  
Turbine Engine ◽  
Wide Range ◽  
Cycle Temperature

After briefly summarizing worldwide automotive gas turbine activity, the paper analyses the power plant requirements of a wide range of vehicle applications in order to formulate the design criteria for acceptable vehicle gas turbines. Ample data are available on the thermodynamic merits of various gas turbine cycles; however, the low cost of its piston engine competitor tends to eliminate all but the simplest cycles from vehicle gas turbine considerations. In order to improve the part load fuel economy, some complexity is inevitable, but this is limited to the addition of a glass ceramic regenerator in the 150 b.h.p. engine which is described in some detail. The alternative further complications necessary to achieve satisfactory vehicle response at various power/weight ratios are examined. Further improvement in engine performance will come by increasing the maximum cycle temperature. This can be achieved at lower cost by the extension of the use of ceramics. The paper is intended to stimulate the design application of the gas turbine engine.

Case Closed: The Completion of the United States Navy 501-K34 Gas Turbine Engine RADCON Program (2011 - 2019)

2021 ◽  
Author(s):  
Jeffrey S. Patterson ◽  
Kevin Fauvell ◽  
Dennis Russom ◽  
Willie A. Durosseau ◽  
Phyllis Petronello ◽  
...  
Keyword(s):  
United States ◽  
Gas Turbine ◽  
United States Navy ◽  
The United States ◽  
Gas Turbine Engine ◽  
United States Government ◽  
Turbine Engines ◽  
Gas Turbine Engines ◽  
Turbine Engine ◽  
The U.S

Abstract The United States Navy (USN) 501-K Series Radiological Controls (RADCON) Program was launched in late 2011, in response to the extensive damage caused by participation in Operation Tomodachi. The purpose of this operation was to provide humanitarian relief aid to Japan following a 9.0 magnitude earthquake that struck 231 miles northeast of Tokyo, on the afternoon of March 11, 2011. The earthquake caused a tsunami with 30 foot waves that damaged several nuclear reactors in the area. It was the fourth largest earthquake on record (since 1900) and the largest to hit Japan. On March 12, 2011, the United States Government launched Operation Tomodachi. In all, a total of 24,000 troops, 189 aircraft, 24 naval ships, supported this relief effort, at a cost in excess of $90.0 million. The U.S. Navy provided material support, personnel movement, search and rescue missions and damage surveys. During the operation, 11 gas turbine powered U.S. warships operated within the radioactive plume. As a result, numerous gas turbine engines ingested radiological contaminants and needed to be decontaminated, cleaned, repaired and returned to the Fleet. During the past eight years, the USN has been very proactive and vigilant with their RADCON efforts, and as of the end of calendar year 2019, have successfully completed the 501-K Series portion of the RADCON program. This paper will update an earlier ASME paper that was written on this subject (GT2015-42057) and will summarize the U.S. Navy’s 501-K Series RADCON effort. Included in this discussion will be a summary of the background of Operation Tomodachi, including a discussion of the affected hulls and related gas turbine equipment. In addition, a discussion of the radiological contamination caused by the disaster will be covered and the resultant effect to and the response by the Marine Gas Turbine Program. Furthermore, the authors will discuss what the USN did to remediate the RADCON situation, what means were employed to select a vendor and to set up a RADCON cleaning facility in the United States. And finally, the authors will discuss the dispensation of the 501-K Series RADCON assets that were not returned to service, which include the 501-K17 gas turbine engine, as well as the 250-KS4 gas turbine engine starter. The paper will conclude with a discussion of the results and lessons learned of the program and discuss how the USN was able to process all of their 501-K34 RADCON affected gas turbine engines and return them back to the Fleet in a timely manner.

scholarly journals The effect of heat recovery on the optimal values of helicopter turboshaft engine parameters

2020 ◽  
Vol 19 (4) ◽  
pp. 43-57
Author(s):  
H. H. Omar ◽  
V. S. Kuz'michev ◽  
A. O. Zagrebelnyi ◽  
V. A. Grigoriev
Keyword(s):  
Heat Exchanger ◽  
Gas Turbine ◽  
Heat Recovery ◽  
Thermodynamic Cycle ◽  
Gas Turbine Engine ◽  
Turbine Engines ◽  
Gas Turbine Engines ◽  
Working Process ◽  
Turbine Engine ◽  
Recuperative Heat Exchanger

Recent studies related to fuel economy in air transport conducted in our country and abroad show that the use of recuperative heat exchangers in aviation gas turbine engines can significantly, by up to 20...30%, reduce fuel consumption. Until recently, the use of cycles with heat recovery in aircraft gas turbine engines was restrained by a significant increase in the mass of the power plant due to the installation of a heat exchanger. Currently, there is a technological opportunity to create compact, light, high-efficiency heat exchangers for use on aircraft without compromising their performance. An important target in the design of engines with heat recovery is to select the parameters of the working process that provide maximum efficiency of the aircraft system. The article focused on setting of the optimization problem and the choice of rational parameters of the thermodynamic cycle parameters of a gas turbine engine with a recuperative heat exchanger. On the basis of the developed method of multi-criteria optimization the optimization of thermodynamic cycle parameters of a helicopter gas turbine engine with a ANSAT recuperative heat exchanger was carried out by means of numerical simulations according to such criteria as the total weight of the engine and fuel required for the flight, the specific fuel consumption of the aircraft for a ton- kilometer of the payload. The results of the optimization are presented in the article. The calculation of engine efficiency indicators was carried out on the basis of modeling the flight cycle of the helicopter, taking into account its aerodynamic characteristics. The developed mathematical model for calculating the mass of a compact heat exchanger, designed to solve optimization problems at the stage of conceptual design of the engine and simulation of the transport helicopter flight cycle is presented. The developed methods and models are implemented in the ASTRA program. It is shown that optimal parameters of the working process of a gas turbine engine with a free turbine and a recuperative heat exchanger depend significantly on the heat exchanger effectiveness. The possibility of increasing the efficiency of the engine due to heat regeneration is also shown.

The Potential Impact of Future Fuels on Small Gas Turbine Engines

1982 ◽  
Author(s):  
J. A. Saintsbury ◽  
P. Sampath
Keyword(s):  
Gas Turbine ◽  
Operating Experience ◽  
Gas Turbine Engine ◽  
Turbine Engines ◽  
Gas Turbine Engines ◽  
Turbine Engine ◽  
The Future ◽  
Potential Impact ◽  
The Impact ◽  
Whitney Aircraft

The impact of potential aviation gas turbine fuels available in the near to midterm, is reviewed with particular reference to the small aviation gas turbine engine. The future course of gas turbine combustion R&D, and the probable need for compromise in fuels and engine technology, is also discussed. Operating experience to date on Pratt & Whitney Aircraft of Canada PT6 engines, with fuels not currently considered of aviation quality, is reported.

Application of Nonparametric Methods to Rainflow Stress Density Estimation of Gas Turbine Engine Usage

2006 ◽  
Author(s):  
M. P. Enright ◽  
R. C. McClung ◽  
S. J. Hudak ◽  
H. R. Millwater
Keyword(s):  
Gas Turbine ◽  
Density Estimation ◽  
High Energy ◽  
Nonparametric Methods ◽  
Gas Turbine Engine ◽  
Estimation Methods ◽  
Turbine Engines ◽  
Density Estimator ◽  
Gas Turbine Engines ◽  
Turbine Engine

The risk of fracture associated with high energy rotating components in aircraft gas turbine engines can be sensitive to small changes in applied stress values which are often difficult to measure and predict. Although a parametric approach is often used to characterize random variables, it is difficult to apply to multimodal densities. Nonparametric methods provide a direct fit to the data, and can be used to estimate the multimodal densities often associated with rainflow stress data. In this paper, a comparison of parametric and nonparametric methods is presented for density estimation of rainflow stress profiles associated with military aircraft gas turbine engine usages. A nonparametric adaptive kernel density estimator algorithm is illustrated for standard parametric probability density functions and for rainflow stress pairs associated with F-16/F100 engine usages. The kernel estimates are compared to parametric estimates, including a hybrid approach based on separate treatment of maximum stress pairs. The results provide some insight regarding the strengths and weaknesses of parametric and nonparametric density estimation methods for gas turbine engines, and can be used to develop improved stress estimates for probabilistic life predictions.

scholarly journals METHOD OF FORMULATING INPUT PARAMETERS OF NEURAL NETWORK FOR DIAGNOSING GAS-TURBINE ENGINES

Aviation ◽  
2013 ◽  
Vol 17 (2) ◽  
pp. 52-56 ◽  
Author(s):  
Mykola Kulyk ◽  
Sergiy Dmitriev ◽  
Oleksandr Yakushenko ◽  
Oleksandr Popov
Keyword(s):  
Neural Network ◽  
Gas Turbine ◽  
Gas Turbine Engine ◽  
Training Data ◽  
Turbine Engines ◽  
Data Sets ◽  
Gas Turbine Engines ◽  
Turbine Engine ◽  
Wide Range ◽  
And Training

A method of obtaining test and training data sets has been developed. These sets are intended for training a static neural network to recognise individual and double defects in the air-gas path units of a gas-turbine engine. These data are obtained by using operational process parameters of the air-gas path of a bypass turbofan engine. The method allows sets that can project some changes in the technical conditions of a gas-turbine engine to be received, taking into account errors that occur in the measurement of the gas-dynamic parameters of the air-gas path. The operation of the engine in a wide range of modes should also be taken into account.

scholarly journals Application of the vacuum casting technology in the production of small-size gas turbine engine blade machines

2021 ◽  
Vol 20 (3) ◽  
pp. 152-159
Author(s):  
A. M. Faramazyan ◽  
S. S. Remchukov ◽  
I. V. Demidyuk
Keyword(s):  
Gas Turbine ◽  
Centrifugal Compressor ◽  
Gas Turbine Engine ◽  
Shrinkage Porosity ◽  
Turbine Engines ◽  
Gas Turbine Engines ◽  
Vacuum Casting ◽  
Turbine Engine ◽  
Design Values ◽  
The Cost

The application of casting technologies in the production of parts and assemblies of small-size gas turbine engines is justified in the paper. The technology of vacuum casting in gypsum molds was tested during the production of an experimental centrifugal compressor of a small-size gas turbine engine. On the basis of a 3D model of the designed centrifugal compressor, computational studies of vacuum casting were carried out and rational parameters of the technological process were determined. Prototypes of the developed centrifugal compressor of a small-size gas turbine engine were made. The results of calculations and the performed technological experiment confirmed the fill rate of the gating form and the absence of short pour. The distribution of shrinkage porosity and cavities corresponds to the design values and is concentrated in the central part of the casting that is subjected to subsequent machining. The area of the blades, disc and sleeve is formed without defects. The use of casting technologies in the production of parts and assemblies of small-size gas turbine engines assures the required quality with a comparatively low price of the finished product, making it possible to achieve the balance between the cost of the technology and the quality of the product made according to this technology.

scholarly journals Aircraft Gas Turbine Engine Testing

2019 ◽  
pp. 39-44
Author(s):  
Stanislav Fábry ◽  
Miroslav Spodniak ◽  
Peter Gašparovič ◽  
Peter Koščák
Keyword(s):  
Gas Turbine ◽  
Engine Performance ◽  
Turbine Engines ◽  
Gas Turbine Engines ◽  
Test Cycle ◽  
Turbine Engine ◽  
Testing Sequence ◽  
Prerequisite Knowledge ◽  
Engine Testing ◽  
Special Factors

The paper deals with testing of aircraft gas turbine engines. The main goal of the research is to propose and design testing sequence for a new or rebuilt engine. All factors and circumstances are described, including surroundings of the engine under test. Prerequisite knowledge is introduced, including the theory of testing, description of test beds, the methods of measurement of engine parameters and special factors that affect engine performance. Some examples of real testing facilities are mentioned. The result of the work is a proposal of test cycle, that can be modified according to engine purpose and specification.

Sign in / Sign up

Export Citation Format

Share Document