scholarly journals OPTIMIZATION OF EXTRACTION PARAMETERS FOR FUCOXANTHIN, GALLIC ACID AND RUTIN FROM NITZSCHIA THERMALIS

2019 ◽  
Vol 13 (1) ◽  
Author(s):  
Vasfiye Hazal Özyur ◽  
Ayşegül Erdoğan ◽  
Zeliha Zeliha Demirel ◽  
Meltem Conk Dalay ◽  
Semih Ötleş
Keyword(s):  
Response Surface Methodology ◽  
Gallic Acid ◽  
Response Surface ◽  
Desirability Function ◽  
Antioxidant Properties ◽  
Value Added ◽  
Extraction Time ◽  
Solvent Ratio ◽  
Extraction Temperature ◽  
Extraction Parameters

Recently, microalgae have become important in their health, and cosmetic applications since they are viewed as new sources of carotenoids. Fucoxanthin is also a type of carotenoid. The anti-diabetic, anti-obesity, anti-cancer, and antioxidant properties of fucoxanthin have been widely reported. Since these valuable properties, they also represent a valuable resource of nutraceuticals for functional food applications. This study aims to determine the amount of fucoxanthin, gallic acid, and rutin in Nitzschia thermalis obtained from the Ege University Microalgae Culture Collection. The extraction parameters have been optimized using response surface methodology. The extraction temperature (25, 35, and 45°C), the extraction time (10, 20, and 30 min) and the biomass/solvent ratio (0.005, 0.001, and 0.015 g ml-1) have been assessed as response variables in the Box – Behnken design. The amount of fucoxanthin was determined by the C30 column at 450 nm, while both the amount of gallic acid and rutin were separated in the C18 column at 275 nm by HPLC-DAD. In the present study, the optimum extraction conditions providing the maximum amount of fucoxantin, gallic acid, and rutin were selected by applying the “desirability” function approach in response surface methodology. Finally, the temperature has been determined to be 27.30°C, the extraction time 10 minutes, and the biomass ratio 0.05 g ml-1. Under these conditions, the optimum fucoxanthin level has been determined as 5.8702 mg g-1, the gallic acid level as 0.0140 mg g-1, and the rutin level as 0.0496 mg g-1. The findings are in good agreement with international published values for fucoxanthin content. In addition, response surface methodology was shown to be an effective technique for optimising extraction conditions for maximum fucoxanthin yield. In conclusion, these findings may be applied in the development of extraction methodologies for value added microalgea products as well as can serve as a reference for the extraction of fucoxanthin having high gallic acid and rutin from other brown microalgae, and therefore it could potentially be applied in both pharmaceutical and food industries.

scholarly journals OPTIMIZATION OF EXTRACTION PARAMETERS FOR TOTAL FLAVONOIDS FROM GARDENIA GUMMIFERA GUM RESIN BY RESPONSE SURFACE METHODOLOGY

2016 ◽  
Vol 8 (11) ◽  
pp. 64 ◽  
Author(s):  
Snehal B. Bhandare ◽  
Kirti S. Laddha
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Close Agreement ◽  
Extraction Time ◽  
Total Flavonoids ◽  
Extraction Temperature ◽  
Optimal Conditions ◽  
Single Factor ◽  
Solvent Concentration ◽  
Extraction Parameters

Objective: To optimize the extraction parameters for determining the highest yield of Total Flavonoids from Gardenia gummifera gum resin.Methods: In the present study, response surface methodology (RSM) with three level Box Behenken design (BBD) was performed to optimize extraction parameters for total flavonoids. Solvent concentration(A), extraction time (B) and extraction temperature(C) were considered for single factor experiment.Results: The highest flavonoid concentration was obtained with acetone 45.00% v/v, time 101.46 min, temperature 41.57 °C. The average experimental TFC under optimal conditions was 161.14 mg/g which was in close agreement with the predicted value of 163.42 mg/g.Conclusion: RSM-BBD is successfully applied in optimizing extraction conditions for extraction of total flavonoids from G. gummifera gum resin.

Optimization of Extraction Process of Lycopene from Watermelon (Citrullus lanatus) by Response Surface Methodology

2011 ◽  
Vol 140 ◽  
pp. 385-393 ◽  
Author(s):  
Xian Feng Shi ◽  
Yuan Xu ◽  
Yu Hua Li ◽  
Hong Xia Zeng ◽  
Yu Hong Sun
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Citrullus Lanatus ◽  
Extraction Process ◽  
Quadratic Equation ◽  
Raw Material ◽  
Extraction Time ◽  
Solvent Ratio ◽  
Extraction Temperature ◽  
Extraction Solvent

The extraction processing of lycopene from watermelon was investigated in this paper. Based on single factor experiments, response surface methodology (RSM) was adopted to study the key parameters such as number of extraction, extraction temperature, extraction time in order to increase extraction rate of lycopene. A second order quadratic equation was established and the applicability of model and interaction involved factors on predicting the lycopene extracting content was verified. The results indicated that the optimum extraction conditions were hexane (containing 2% dichloromethane) as extraction solvent, ratio of solvent to raw material of 3:1 (mL/g), number of extraction of 2, extraction time of 1.9 h and extraction temperature of 29.8°C. Under these conditions the extracting content of lycopene was 14.71±0.22 mg/kg, which is well in agreement with value predicted by the model.

scholarly journals Optimization of Ultrasound-Assisted Extraction of Bioactive Compounds from Acacia Seyal Gum Using Response Surface Methodology and Their Chemical Content Identification by Raman, FTIR, and GC-TOFMS

Antioxidants ◽  
2021 ◽  
Vol 10 (10) ◽  
pp. 1612
Author(s):  
Tahani Maher ◽  
Nassereldeen A. Kabbashi ◽  
Mohamed E. S. Mirghani ◽  
Md Z. Alam ◽  
Djabir Daddiouaissa ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Bioactive Compounds ◽  
Extraction Time ◽  
Solvent Ratio ◽  
Extraction Temperature ◽  
Ultrasound Assisted Extraction ◽  
Assisted Extraction ◽  
Ultrasound Assisted ◽  
Acacia Seyal

Acacia Seyal gum (ASG), also known as gum Arabic, is an antioxidant-rich soluble fiber. ASG has been reported to have many biological activities, including anticancer, antidiabetic, antiulcer, and immunomodulatory activity. Extraction of bioactive compounds from ASG is commonly performed using conventional extraction methods. However, these techniques have certain limitation in terms of extraction time, energy, and solvent requirements. Ultrasound-assisted extraction (UAE) could be used as an alternative technique to extract bioactive compounds in less time, at low temperature, and with less energy and solvent requirements. In this study, the UAE extraction of ASG was optimized using response surface methodology (RSM). A face-centered central composite design (FCCCD) was used to monitor the effect of different independent factors of ultrasound operation (sonication time, temperature, and solvent ratio) on ASG extraction yield. In addition, screening and characterization of phytochemicals in 60% ethanol ASG extract was carried out using Raman microscopy, Fourier transform infrared spectroscopy (FTIR), and gas chromatography time-of-flight mass spectroscopy (GC-TOFMS) analysis. The results indicated that, under optimal conditions (extraction time 45 min, extraction temperature 40 °C, and solid–liquid ratio of 1:25 g/mL), the yield of ASG was 75.87% ± 0.10. This yield was reasonably close to the predicted yield of 75.39% suggested by the design of experiment. The ANOVA revealed that the model was highly significant due to the low probability value (p < 0.0001). Raman spectrum fingerprint detected polysaccharides, such as galactose and glucose, and protein like lysine and proline, while FTIR spectrum revealed the presence of functional groups peaks value of alkanes, aldehydes, aliphatic amines, and phenol. GC-TOFMS spectroscopic detected the presence of strong d-galactopyranose, carotenoid, and lycopene antioxidant compounds. In conclusion, this study demonstrated that the UAE technique is an efficient method to achieve a high yield of ASG extracts. The selected model is adequate to optimize the extraction of several chemical compounds reported in this study.

scholarly journals Optimization of Extraction of Total Phenolic and Total Flavonoid from Seeds of Alpinia blepharocalyx K. Schum. Using The Response Surface Methodology

2019 ◽  
Vol 57 (3B) ◽  
pp. 105
Author(s):  
Thanh Tan Nguyen ◽  
Huyen Thi Thanh Mai ◽  
Tuan Ngoc Nguyen ◽  
Quang Dinh Tran ◽  
Thang Dinh Tran
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Antioxidant Properties ◽  
Total Flavonoid ◽  
Extraction Time ◽  
Total Phenolic ◽  
Extraction Temperature ◽  
Flavonoid Compounds ◽  
Phenolic And Flavonoid ◽  
Phenolic And Flavonoid Compounds

Seeds of Alpinia blepharocalyx contain high amounts of phenolic and flavonoid compounds with potential antioxidant properties. In this study, the effects of the extraction method on the recovery of phenolic and flavonoid compounds from Alpinia blepharocalyx seeds were investigated. Response surface methodology (RSM) has been used to optimize the extraction conditions of total phenolic and total flavonoid from seeds of Alpinia blepharocalyx. A Box-Behnken design was used to investigate the effects of four independent variables, namely extraction temperature (°C), extraction time (min), (v/m) and ethanol concentration (%) on the responses: total phenolic content (TPC) and yield. The optimal conditions obtained from response RSM were 52.66 % v/v for the solvent composition, 62.34 (°C) for extraction temperature, 34.48/1 (ml/g) for solvent/material ratio and 125.42 (min) for extraction time. The experimental values of TPC, TFC and yield were 39.31±0.05 mgGAE/g, 12.75±0.07 mgCE/g and 6.97±0.05%, respectively.   

scholarly journals Statistical Analysis of Metal Chelating Activity of Centella asiatica and Erythroxylum cuneatum Using Response Surface Methodology

2013 ◽  
Vol 2013 ◽  
pp. 1-5 ◽  
Author(s):  
R. J. Mohd Salim ◽  
M. I. Adenan ◽  
A. Amid ◽  
M. H. Jauri ◽  
A. S. Sued
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Centella Asiatica ◽  
Ethyl Acetate Fraction ◽  
Extraction Time ◽  
Extraction Temperature ◽  
Chelating Activity ◽  
Metal Chelating ◽  
Metal Chelating Activity ◽  
Extraction Parameters

The purpose of the study is to evaluate the relationship between the extraction parameters and the metal chelating activity of Centella asiatica (CA) and Erythroxylum cuneatum (EC). The response surface methodology was used to optimize the extraction parameters of methanolic extract of CA and EC with respect to the metal chelating activity. For CA, Run 17 gave optimum chelating activity with IC50 = 0.93 mg/mL at an extraction temperature of 25°C, speed of agitation at 200 rpm, ratio of plant material to solvent at 1 g : 45 mL and extraction time at 1.5 hour. As for EC, Run 13 with 60°C, 200 rpm, 1 g : 35 mL and 1 hour had metal chelating activity at IC50 = 0.3817 mg/mL. Both optimized extracts were further partitioned using a solvent system to evaluate the fraction responsible for the chelating activity of the plants. The hexane fraction of CA showed potential activity with chelating activity at IC50 = 0.090 and the ethyl acetate fraction of EC had IC50 = 0.120 mg/mL. The study showed that the response surface methodology helped to reduce the extraction time, temperature and agitation and subsequently improve the chelating activity of the plants in comparison to the conventional method.

scholarly journals Optimization of Ultrasound-Assisted Extraction of Phenolics from Sideritis raeseri Using Response Surface Methodology

Molecules ◽  
2021 ◽  
Vol 26 (13) ◽  
pp. 3949
Author(s):  
Katarina Šavikin ◽  
Jelena Živković ◽  
Teodora Janković ◽  
Nada Ćujić-Nikolić ◽  
Gordana Zdunić ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Ethanol Concentration ◽  
Extraction Time ◽  
Total Phenolic ◽  
Solvent Ratio ◽  
Extraction Temperature ◽  
Ultrasound Assisted Extraction ◽  
Assisted Extraction ◽  
Ultrasound Assisted

In this study we define the optimal conditions for ultrasound-assisted extraction of bioactive polyphenols from S. raeseri aerial parts using response surface methodology. The influence of ethanol concentration (10–90%), extraction temperature (20–80 °C), extraction time (10–60 min), and solid-to-solvent ratio (1:10–1:50) on total phenolic content as well as on content of individual flavonoids, and hypolaetin and isoscutellarein derivatives was studied. For the experimental design, a central composite design was chosen. In the obtained extracts, the following ranges of targeted compounds were detected: total phenol from 19.32 to 47.23 mg GAE/g dw, HYP from 1.05 to 11.46 mg/g dw, ISC 1 from 0.68 to 10.68 mg/g dw, and ISC 2 from 0.74 to 15.56 mg/g dw. The optimal extraction conditions were set as: ethanol concentration of 65%, extraction time of 50 min, extraction temperature of 63 °C, and solid-to-solvent ratio of 1:40. Contents of TP, HYP, ISC 1, and ISC 2 in optimal extracts were 47.11 mg GAE/g dw, 11.73 mg/g dw, 9.54 mg/g dw, and 15.40 mg/g dw, respectively. Experimentally set values were in good agreement with those predicted by the response surface methodology model, indicating suitability of the used model, as well as the success of response surface methodology in optimizing the conditions of the extraction.

scholarly journals Homogenate Extraction of Crocins from Saffron Optimized by Response Surface Methodology

2018 ◽  
Vol 2018 ◽  
pp. 1-6 ◽  
Author(s):  
Yingpeng Tong ◽  
Yu Jiang ◽  
Dan Guo ◽  
Yongqiu Yan ◽  
Shiping Jiang ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Ethanol Concentration ◽  
Extraction Yield ◽  
Extraction Time ◽  
Process Conditions ◽  
Extraction Temperature ◽  
Single Factor ◽  
Extraction Voltage ◽  
Homogenate Extraction

Saffron, which has many kinds of biological activities, has been widely used in medicine, cosmetics, food, and other fields of health promotion industries. Crocins are the main component of saffron (Crocus sativus L.). At present, most of the extraction methods for crocins require long time or special instruments to complete the process and some of them are not suitable for industrial production at present. In this article, homogenate extraction technology which is a convenient and efficient method was developed for crocins extraction from saffron. Firstly, the influences of extraction voltage, extraction time, ethanol concentration, and temperature on crocins yield were studied by single factor experiments; and then response surface methodology (RSM) was used to optimize levels of four variables based on the result of single factor experiments. Results showed that the optimum extraction process conditions for crocins were as follows: extraction voltage, 110 V; ethanol concentration, 70%; extraction temperature, 57°C; and extraction time, 40 s. Based on these conditions, the extraction yield of crocins can reach 22.76% which is higher than ultrasonic extraction method. Therefore, homogenate extraction is an effective way to extract crocins from saffron with higher extraction yield and shorter extraction time.

scholarly journals Optimization of Supercritical Carbon Dioxide Extraction of Quercus infectoria Oil

2015 ◽  
Vol 74 (7) ◽  
Author(s):  
Liza Md Salleh ◽  
Stashia ELeaness Rosland Abel ◽  
Gholamreza Zahedi ◽  
Russly Abd Rahman ◽  
Hasmida Mohd Nasir ◽  
...  
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Goodness Of Fit ◽  
Maximum Yield ◽  
Extraction Yield ◽  
Extraction Time ◽  
Extraction Temperature ◽  
Predicted Values ◽  
Artificial Neural Network Ann ◽  
Quercus Infectoria

This current study focuses on the modelling and optimization of supercritical fluid extraction of Quercus infectoria galls oil. In this case, response surface methodology (RSM) and artificial neural network (ANN) were applied for the modelling and prediction of extraction yield of galls oil. A 17-run Box-Behnken Design (BBD) was employed to statistically optimize the process parameters of SC-CO2 extraction of Quercus infectoria galls at a condition as follows: pressure (5000, 6000, 7000 Psi), temperature (40, 50, 60°C) and extraction time (30, 45, 60 min). The maximum yield of the extracted oil is1.12 % and the optimum conditions are at an extraction pressure of 5574 Psi; extraction temperature of 75°C and extraction time of 54 min. Under the optimal conditions, the experimental results agree with the predicted values obtained through analysis of variance (ANOVA). This indicates a successful response surface methodology and highly satisfactory goodness of fit of the model used. The analysis of experimental design for process optimization results demonstrates that temperature and extraction time are the main parameters that influence the oil extraction of Quercus infectoria.

scholarly journals Development of Phaleria macrocarpa (Scheff.) Boerl Fruits Using Response Surface Methodology On Phenolic, Flavonoid and Antioxidants Properties

2018 ◽  
Author(s):  
Khurul Ain Mohamed Mahzir ◽  
Siti Salwa Abdul Gani ◽  
Nor Fadzillah Mokhtar
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Radical Scavenging Activity ◽  
Radical Scavenging ◽  
Reducing Power ◽  
Extraction Time ◽  
Feed Ratio ◽  
Total Phenolic ◽  
Extraction Temperature ◽  
Phaleria Macrocarpa

In this study, the optimal condition for the extraction of antioxidants from the fruit Buah Mahkota Dewa (Phaleria macrocarpa) was determined by using Response Surface Methodology (RSM). The optimization was applied using central composite design (CCD) to investigate the three independent variables, namely extraction temperature (oC), extraction time (minutes) and extraction solvent to-feed ratio (%v/v) on the responses of free radical scavenging activity (DPPH), ferric ion reducing power assay (FRAP), total phenolic content (TPC) and total flavonoid content (TFC).The optimal conditions for the antioxidants extraction were found to be extraction temperature (64oC), extraction time (66 minutes) and solvent to-feed ratio (75 %v/v) with the highest percentage yield of DPPH, FRAP, TPC and TFC were 86.85%, 7.47%, 292.86 mg/g and 3.22 mg/g respectively. Moreover, the data were subjected to response surface methodology (RSM) and the results showed that the polynomial equations for all models were significant, did not show lack of fit, and presented adjusted determination coefficients (R2) above 99%, proving the yield of phenolic, flavonoid and antioxidants activities obtained experimentally were close to the predicted values and the suitability of the model employed in RSM to optimize the extraction conditions. Hence, in this study, the fruit from P.macrocarpa could be considered to have the strong antioxidant ability and can be used in various cosmeceutical or medicinal applications.

scholarly journals Optimization of the extraction of natural phenolic antioxidants from the seeds of Tamarindus indica L. - an undervalued by product of food processing - using response surface methodology

2018 ◽  
Vol 62 (1) ◽  
pp. 67-74 ◽  
Author(s):  
Atreyi Sarkar ◽  
Uma Ghosh
Keyword(s):  
Response Surface Methodology ◽  
Response Surface ◽  
Extraction Time ◽  
Phenolic Antioxidants ◽  
Extraction Temperature ◽  
Tamarindus Indica ◽  
Solvent Concentration ◽  
Antioxidant Power ◽  
Wide Range ◽  
Ferric Reducing Antioxidant Power

The seeds of Tamarindus indica are known to possess a wide range of phenolic compounds with high antioxidant activity as measured by the ferric reducing antioxidant power (FRAP). In the present study, the optimum conditions for the extraction of crude phenolic antioxidants from Tamarind seed were determined using response surface methodology (RSM). A central composite design (CCD) was used to investigate the effects of four independent variables, namely concentration of extractable solids in solvent (g/ml; X1), extraction time (h; X2), extraction temperature (°C; X3) and solvent concentration (%, v/v; X4) on the responses of total polyphenol content (TPC) and FRAP. The CCD consisted of 30 experimental runs. A second-order polynomial model was used for predicting the responses. Canonical analysis of the surface responses revealed that the predicted optimal conditions for the maximal yield of TPC and FRAP were concentration of extractable solids in solvent of 0.049 g/ml, extraction time of 3.24 h, extraction temperature of 45 °C and a solvent concentration of 50%. The experimental values in the optimised condition coincided with the predicted ones within a 95% confidence interval, hence indicating the suitability of the model and the success of RSM in optimizing the extraction parameters.

Sign in / Sign up

Export Citation Format

Share Document