scholarly journals Effect of Defoliation and Fe and Mn Spraying on Quality and Quantity Characteristics of Sunflower (Helianthus annuus L.)

2011 ◽  
Vol 3 (3) ◽  
pp. 113-119 ◽  
Author(s):  
Farshid VAZIN ◽  
Mojtaba HASSANZADEHDELOUEI ◽  
Mohamadjavad KHERADMAND
Keyword(s):  
Seed Yield ◽  
Seed Weight ◽  
Foliar Application ◽  
Antagonistic Effect ◽  
Leaf Removal ◽  
Negative Effects ◽  
Combined Use ◽  
Fe And Mn ◽  
Defoliation Treatment ◽  
Severe Leaf

The study was aimed at identifying the amount of reduction in the negative effects of leaf removal on both quality and quantity of sunflower as a result of foliar application of Fe and Mn. Severe leaf removal reduced the seed yield and seed weight to 11% and 10.5% respectively. The use of Fe in comparison to control increased the seed yield and seed weight up to 12% and 10% respectively. The use of Mn in comparison to control caused an increase in seed number up to 11.6% but caused a reduction in seed weight to 10%. The use of Fe in normal foliar defoliation treatment (40% defoliation) caused a significant increase in seed yield but no significant effect was observed in sever defoliation treatment (80% defoliation). Although using Mn in all treatments led to a rise in seed yield, the effect was not significant, it could be concluded that the combined use of Mn and Fe had no significant influence on sunflower yield, so there might be an antagonistic effect between the two.

The effect of defoliation on seed production by capeweed (Arctotheca calendula)

1973 ◽  
Vol 13 (65) ◽  
pp. 676 ◽  
Author(s):  
JG McIvor ◽  
DF Smith
Keyword(s):  
Seed Production ◽  
Seed Yield ◽  
Yield Components ◽  
Seed Weight ◽  
Leaf Removal ◽  
Late Flowering ◽  
Individual Seed ◽  
Number Of Seeds

Two experiments were done in pots to assess the effect of defoliation at different times on the seed yield of capeweed (Arctotheca calendula). Yield components measured were: number of seedheads per plant, number of seeds per seedhead, number of seeds per plant, and weight of individual seeds. Of the components of yield, number of florets per seedhead and individual seed weight were maintained under all treatments; number of seedheads and number of seeds per seedhead were more affected by defoliation. Whether grown as spaced plants or in swards, leaf removal did not significantly reduce the number of seeds produced unless combined with bud and flower removal at late flowering only. The results are discussed in relation to the growth and persistence of capeweed in pastures.

The optimum foliar zinc source and level for improving Zn content in seed of chickpea

2015 ◽  
Vol 38 (6) ◽  
Author(s):  
Nihal Kayan ◽  
Nurdilek Gulmezoglu ◽  
Mehmet Demir Kaya
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Yield Components ◽  
Seed Weight ◽  
Harvest Index ◽  
Foliar Application ◽  
Seed Number ◽  
Plant Seed ◽  
Zn Content ◽  
Pod Number

The comparative effect of 0, 0.2, 0.4, 0.6 and 0.8% Zn levels of zinc chelate (Zn-EDTA; 8% Zn) and zinc sulfate (23% Zn) applied as foliar sprays for assuaging zinc deficiency of chickpea cv. Gökçe was evaluated under field condition. The sprays were applied on the plants before blooming stage during 2012 and 2013 growing seasons and seed yield, yield components like plant height, pod number per plant, seed number per plant, hundred seed weight, harvest index and mineral concentrations (nitrogen, phosphorus, zinc and iron) in seeds were investigated. Plant height, pod number per plant, seed number per plant, hundred seed weight, harvest index and seed yield were investigated. The results showed that increased zinc doses caused an increase in Zn content of seed, while seed yield was not affected similarly. In general, plant height, pod number and seed number per plant increased by the application of zinc. Lower dose of Zn-EDTA and higher dose of ZnSO<sub>4</sub> gave higher yield components. Seed weight, harvest index and seed yield were not significantly influenced by Zn sources and doses; however, mineral concentration of seeds enhanced when Zn doses were increased. It was concluded that foliar application of zinc resulted in an increase in seed mineral contents rather than seed yield of chickpea. The dose of 0.6% with Zn-EDTA was the optimum combination for Zn enrichment in seed of chickpea.

THE EFFECTS OF LEAF REMOVAL ON YIELD AND YIELD COMPONENTS OF BRASSICA NAPUS

1978 ◽  
Vol 58 (4) ◽  
pp. 1103-1105 ◽  
Author(s):  
J. M. CLARKE
Keyword(s):  
Brassica Napus ◽  
Seed Yield ◽  
Yield Components ◽  
Seed Weight ◽  
Field Conditions ◽  
Leaf Removal ◽  
Brassica Napus L ◽  
Yield And Yield Components

The effects of time of leaf removal on Brassica napus L. were studied under field conditions at Saskatoon in 1976 and at Swift Current in 1977. Leaf removal at the start of flowering reduced the number of pods per plant, increased seed weight, and reduced seed yield. Leaf removal at the end of flowering did not affect yield or its components.

scholarly journals Evaluation of Application Methods Efficiency of Zinc and Iron for Canola(Brassica napus L.)

1970 ◽  
Vol 2 (1) ◽  
pp. 94-103 ◽  
Author(s):  
Ahmad BYBORDI ◽  
Garib MAMEDOV
Keyword(s):  
Antioxidant Enzymes ◽  
Seed Yield ◽  
Seed Weight ◽  
Foliar Application ◽  
Weight Ratio ◽  
Oil Yield ◽  
Protein Percentage ◽  
Soil Application ◽  
Enzymes Activity ◽  
Oil Percentage

In order to evaluation of application method efficiency of zinc and iron microelements in canola, an experiment was conducted in the Agricultural Research Station of Eastern Azerbaijan province in 2008. The experimental design was a RCBD with eight treatments (F1: control, F2: iron, F3: zinc, F4: iron + zinc in the form of soil utility, F5: iron, F6: zinc, F7: iron+ zinc in the form of solution foliar application, and F8: iron + zinc in the form of soil utility and foliar application). Analysis of variance showed that there were significant differences among treatments on given traits, antioxidant enzymes activity, fatty acids percentage, plant height, seed weight to capitulum weight ratio, protein percentage, oil percentage, oil yield, 1000 seed weight, seed yield, nitrogen, phosphorous and potassium percentage of leaves, zinc and iron content of leaves and capitulum diameters. The highest seed yield, oil yield, oil percentage, 1000 seed weight, seed weight to capitulum weight ratio and protein percentage were obtained from the soil and foliar application of iron + zinc treatments (F8). Also, the highest amounts of nitrogen, phosphorous and potassium concentration in leaves were achieved from control treatment which was an indication of non-efficiency of iron and zinc on the absorption rate of these substances in the leaves. The correlation between effective traits on the seed yield, such as, capitalism diameter, number of seed rows in capitulum, seed weight to capitulum weight ratio and 1000 seed weight were positively significant. In general, foliar and soil application of zinc and iron had the highest efficiency in aspect of seed production. The comparison of the various methods of fertilization showed that foliar application was more effective than soil application. Also, micronutrient foliar application increased concentration of elements, especially zinc and iron. Antioxidant enzymes activity was different in response to treatments also the highest palmitoleic, oleic and myristic acid were observed in F6 and F7 treatments.

scholarly journals WINTER OILSEED RAPE YIELD DEPENDING ON FOLIAR FERTILIZATION

2020 ◽  
Vol 19 (1) ◽  
pp. 11
Author(s):  
Anna Sikorska ◽  
Marek Gugała ◽  
Krystyna Zarzecka
Keyword(s):  
Amino Acids ◽  
Oilseed Rape ◽  
Seed Yield ◽  
Seed Weight ◽  
Foliar Application ◽  
Climatic Conditions ◽  
Growth Type ◽  
Winter Oilseed Rape ◽  
Foliar Fertilizer ◽  
Thousand Seed Weight

Background. An insufficient amount of nutrients in plants results in the disturbance of basic physiological processes, weakens the growth and development of plants, and consequently contributes to a reduction in yield. The aim of this study was to determine the effect of foliar fertilizers containing sulphur, boron and amino acids on the seed yield of three winter oilseed rape morphotypes (Monolit, PX115, PT248).Material and methods. The study was carried out in 2016-2019 at the Zawady Agricultural Experimental Station (52o03' N; 22o33' E) belonging to the University of Natural Sciences and Humanities in Siedlce, in Poland. The field experiment was established in a split-plot design with three replicates. The studied factors were: I – three winter oilseed rape morphotypes: population (cv. Monolit), restored with the traditional growth type (cv. PT248), and restored with the semi-dwarf growth type (cv. PX115); II – types of foliar feeding: 1. The control variant – without foliar feeding and amino acids applied, 2. biostimulant Aminoplant, 3. foliar fertilizer Siarkomag + foliar fertilizer Bormax, 4. foliar fertilizer Siarkomag + foliar fertilizer Bormax + biostimulant Aminoplant.Results. Foliar fertilizers used in the experiment increased the thousand seed weight (on average in the range from 0.9% to 3.4%), seed yield (on average in the range from 2.5% to 18.5%), straw yield (on average in the range from 2.1% to 5.4%) and the harvest index (on average in the range from 4.4% to 7.5%). Of the compared cultivars the semi-dwarf cultivar (PX115) was characterized by the highest yield, while the lowest was from the population cultivar (Monolit). The highest thousand seed weight, main and secondary yields were obtained in the first year of the study which was characterized by a higher total rainfall during seed development and maturation of pods periods compared to the multi-year period, while the lowest levels of these factors was in the vegetation season of 2017–2018 with a humid autumn season and dry period during the flowering and maturation of pods.Conclusion. The most significant increase in the thousand seed weight and seed yield was obtained after applying mixed fertilizers containing sulphur, boron and amino acids. Additional foliar application of the biostimulant Aminoplant on plots with the population and semi-dwarf cultivars did not significantly increase the seed yield as compared to the control. A significant effect of the genetic factor and climatic conditions on the discussed traits has been demonstrated.

scholarly journals Seed yield can be explained by altered yield components in field-grown western wheatgrass (Pascopyrum smithii Rydb.)

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Zhao Chen ◽  
Junpeng Niu ◽  
Xinlong Cao ◽  
Wenbo Jiang ◽  
Jian Cui ◽  
...  
Keyword(s):  
Seed Yield ◽  
Yield Components ◽  
Seed Weight ◽  
Antagonistic Effect ◽  
Yield Component ◽  
Direct Selection ◽  
Pascopyrum Smithii ◽  
Western Wheatgrass ◽  
Selection For ◽  
High Seed Yield

AbstractWestern wheatgrass (Pascopyrum smithii Rydb.) is an important cool-season forage and turfgrass. However, due to seed dormancy and poor seedling vigor, it is difficult to develop high seed yield production systems, and assessing these components in response to seed yield. Based on multifactor orthogonally designed field experimental plots under various field management regimes, the effects of numbers of fertile tillers m−2 (Y1), spikelets/fertile tiller (Y2), florets/spikelet (Y3), seed numbers/spikelet (Y4), and seed weight (Y5) on seed yield (Z) were determined over three successive years. Correlation analysis indicated that fertile tillers (Y1) was the most important seed yield component. And the biggest contribution of those five yield component is fertile tillers (Y1), followed by seed numbers/spikelet (Y4), spikelets/fertile tiller (Y2), florets/spikelet (Y3) and seed weight (Y5), respectively. By using ridge regression analysis, we have developed an accurate model of seed yield with its five components. Finally, the results of synergism and antagonism among these yield components on seed yield showed that fertile tillers and seed numbers/spikelet had an antagonistic effect on seed yield. Therefore, selection for high seed yield by direct selection for large values of fertile tillers and seed numbers/spikelet would be the most effective breeding strategy for western wheatgrass.

scholarly journals Improvement of Growth, Yield, Seed Production and Phytochemical Properties of Satureja khuzistanica Jamzad by Foliar Application of Boron and Zinc

Plants ◽  
2021 ◽  
Vol 10 (11) ◽  
pp. 2469
Author(s):  
Hasan Mumivand ◽  
Parisa Khanizadeh ◽  
Mohammad Reza Morshedloo ◽  
Edyta Sierka ◽  
Krystyna Żuk-Gołaszewska ◽  
...  
Keyword(s):  
Seed Germination ◽  
Essential Oil ◽  
Seed Production ◽  
Seed Yield ◽  
Seed Weight ◽  
Seed Quality ◽  
Foliar Application ◽  
Growth Yield ◽  
Total Phenolic ◽  
Distilled Water

Satureja khuzistanica Jamzad is a valuable and endemic medicinal plant. Boron and zinc are essential elements for the vegetative and reproductive growth of plants and have significant effects on yield, essential oil composition and the seed production of plants. To investigate the effects of the foliar application of zinc and boron on the growth, yield, seed production and phytochemical properties of S. khuzistanica, a study was conducted in a factorial experiment with three replicates in two consecutive years based on a randomized complete block design. The foliar application of boron (B) at three concentrations (control or distilled water, 0.4% and 0.8% as H3BO3) and zinc (Zn) at three concentrations (control or distilled water, 0.3% and 0.6% as ZnSO4) was carried out. Our results showed that the foliar application of B resulted in a significant increase in the fresh and dry weights of plants, the dry weight of stems, drug yield, seed yield, seed germination and 1000-seed weight. At the same time, the application of B resulted in a significant decrease in seed emptiness. The fresh and dry weights of plants, drug yield, seed yield, 1000-seed weight and seed germination were also significantly improved by Zn foliar spraying compared to the control. Application of 0.8% B resulted in a significant decrease in seed emptiness by 14.16% and 22.37%, as compared to the control. The foliar spraying of B and Zn improved the total phenolic content, the essential oil content and the yield and antioxidant activity of S. khuzistanica. Moreover, B application generally concentrated more carvacrol in the essential oil (in the first experimental year). In contrast, no significant differences were observed between Zn treatments in carvacrol content and total flavonoids. The use of several microelements, such as B and Zn, could improve both the quantity and quality of S. khuzistanica. Additionally, improvement of seed set and seed quality by the foliar spraying of Zn and B may be useful for growing plants in arid and semi-arid areas.

STUDY OF EFFECT OF EMS, MMS AND GR ON YIELD CONTRIBUTING TRAITS IN URDBEAN, VIGNA MUNGO

2017 ◽  
Vol 23 (1) ◽  
Author(s):  
A. B. SAGADE
Keyword(s):  
Plant Height ◽  
Seed Yield ◽  
Seed Weight ◽  
Inhibitory Effect ◽  
Individual Plant ◽  
Mean Values ◽  
Methane Sulphonate ◽  
Pod Length ◽  
100 Seed Weight ◽  
Number Of Seeds

The study of the effect of three well known mutagens, ethyl methane sulphonate (EMS), methyl methane sulphonate (MMS) and gamma rays (GR) on the yield contributing traits of the urdbean variety TPU-4 were carried out in the M3 generation. Effect of selected mutagenic treatments/doses of EMS (0.02, 0.03 and 0.04 M), MMS (0.0025, 0.05 and 0.01 M) and (GR) (30, 40 and 50 KR) on different yield contributing traits like plant height, plant spread, number of pods per plant, pod length, number of seeds per pod, seed yield per plant and 100 seed weight were analyzed in the M3 populations of the variety TPU-4. Seeds of M2 plants and control were harvested separately and sown to raise M3 population.. Genetic variabilty in the mutagen administered M3 progeny of the urdbean variety TPU-4 was analyzed by employing statistical methods. Data on mean values and shift in the mean of seven quantitative traits was evaluated on individual plant basis. The experimental findings revealed that concentrations / dose of the all these mutagens showed inhibitory effect on plant height, number of pods per plant, pod length and number of seeds per pod. Lower concentrations of mutagens exerted a promotory effect on plant spread, 100 seed weight and seed yield per plant while higher concentrations of these mutagens inhibited them to different extent.

Evaluation of some sunflower genotypes for agronomic traits and oil quality

Helia ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Khaled Mohamed Aboelkassem ◽  
Asmaa Abd-EL-Halime Ahmed ◽  
Mohamed Ali Abdelsatar
Keyword(s):  
Fatty Acids ◽  
Seed Yield ◽  
Seed Weight ◽  
Unsaturated Fatty Acids ◽  
Agronomic Traits ◽  
Oil Quality ◽  
Research Station ◽  
Head Diameter ◽  
Coefficients Of Variation ◽  
100 Seed Weight

Abstract The present investigation was carried out to evaluate agronomic performance and oil quality of seven sunflower genotypes at Shandaweel Research Station, Agricultural Research Center, Sohag, Egypt during 2018 and 2019 summer seasons. These genetic materials were sown in a randomized complete block design having three replications. Significant genetic variations among evaluated sunflower genotypes for agronomic traits and oil quality were observed. The superior sunflower genotypes were Line 120 for seed yield per hectare (3102.38 kg), Sakha 53 for seed oil content (44.63 %) and Line 125 for oil quality where it contained the highest proportion of unsaturated fatty acids (89.20 %). The phenotypic coefficients of variation were slightly higher than genotypic coefficients of variation for all studied traits. High heritability (exceeded 60%) and genetic advance as percent of mean (ranged from medium to high, exceeded 10%) was observed for most studied traits. Seed yield per plant positively correlated with plant height, stem diameter, head diameter, and 100-seed weight and most chemical traits at phenotypic and genotypic levels. Maximum phenotypic direct effects on seed yield per plant were observed for 100-seed weight, head diameter and total unsaturated fatty acids. While, the highest genotypic direct effect on seed yield per plant was observed for head diameter. Hence, most studied traits could be employed as selection criteria for improving evaluated sunflower genotypes.

scholarly journals Standardizing the Hydrogel Application Rates and Foliar Nutrition for Enhancing Yield of Lentil (Lens culinaris)

Processes ◽  
2020 ◽  
Vol 8 (4) ◽  
pp. 420 ◽  
Author(s):  
Shashidhar K. Shankarappa ◽  
Samuel J. Muniyandi ◽  
Ajay B. Chandrashekar ◽  
Amit K. Singh ◽  
Premaradhya Nagabhushanaradhya ◽  
...  
Keyword(s):  
Salicylic Acid ◽  
Seed Yield ◽  
Lens Culinaris ◽  
Foliar Application ◽  
Winter Season ◽  
Growth Period ◽  
Growth And Yield ◽  
Flower Initiation ◽  
Foliar Nutrition ◽  
Pod Development

Lentil (Lens culinaris) is an important winter season annual legume crop known for its highly valued seed in human and animal nutrition owing to its high lysine and tryptophan content. Shortage of water during the crop growth period has become the major impediment for cultivation of pulses in rice fallow in particular. Under such conditions, the application of hydrogel can be a potential alternative to improve photosynthetic efficiency, assimilate partitioning, and increase growth and yield. A field experiment was conducted from November to February during 2015–16 to 2017–18 on clay loam soil that was medium in fertility and acidic in reaction (pH 5.4) at Central Agricultural University, Imphal, Manipur. The experiment was laid out in split plot design with three replications. There were three hydrogel levels in total in the main plot and foliar nutrition with five different nutrient sprays in sub-plots, together comprising 15 treatment combinations. The data pooled over three years, 2015–2018, revealed that application of hydrogel at 5 kg/ha before sowing recorded a significantly greater number of pods per plant (38.0) and seed yield (1032.1 kg/ha) over the control. Foliar application of nutrients over flower initiation and pod development had a positive effect on increasing the number of pods per plant eventually enhanced the seed yield of lentil. Foliar application of either 0.5% NPK or salicylic acid 75 ppm spray at flower initiation and pod development stages recorded significantly more pods per plant over other nutrient treatments. Further, the yield attributed improved because of elevated growth in plant. Significantly maximum seed yield (956 kg/ha) recorded in the NPK spray of 0.5% remained on par with salicylic acid 75 ppm (939 kg/ha) over the rest of the treatments.

Sign in / Sign up

Export Citation Format

Share Document