scholarly journals Brushite cement containing gelatin: evaluation of mechanical strength and in vitro degradation

Cerâmica ◽  
2019 ◽  
Vol 65 (374) ◽  
pp. 261-266 ◽  
Author(s):  
L. P. Silva ◽  
M. D. P. Ribeiro ◽  
E. S. Trichês ◽  
M. Motisuke
Keyword(s):  
Mechanical Properties ◽  
Weight Loss ◽  
Compressive Strength ◽  
Solid Phase ◽  
Setting Time ◽  
Biological Properties ◽  
Solubility In Water ◽  
Ringer’S Solution ◽  
Weight Loss Data

Abstract Calcium phosphate cements (CPCs) are potential materials for repairing bone defects, mainly due to their excellent biocompatibility and osteoconductivity. Nevertheless, their low mechanical properties limit their usage in clinical applications. The gelatin addition may improve the mechanical and biological properties of CPCs, but their solubility in water may increase the porosity of the cement during degradation. Thus, the aim of this work was to investigate the influence of gelatin on the setting time, compressive strength and degradation rate of a brushite cement. CPCs were prepared with the addition of 0, 5, 10 and 20 wt% of gelatin powder in the solid phase of the cement. The results indicated that the setting time increased with gelatin. Furthermore, cement with 20 wt% of gelatin had an initial compressive strength of 14.1±1.8 MPa while cement without gelatin had 4.5±1.2 MPa. The weight loss, morphology and compressive strength were evaluated after degradation in Ringer’s solution. According to the weight loss data, gelatin was eliminated of samples during degradation. It was concluded that the presence of gelatin improved CPCs mechanical properties; however, as degradation in Ringer’s solution evolved, cement compressive strength decreased due to gelatin dissolution and, consequently, an increase in sample porosity.

scholarly journals Effect of Silver Nanoparticles on Physicochemical and Antibacterial Properties of Calcium Silicate Cements

2016 ◽  
Vol 27 (5) ◽  
pp. 508-514 ◽  
Author(s):  
Fernando Vazquez-Garcia ◽  
◽  
Mário Tanomaru-Filho ◽  
Gisselle Moraima Chávez-Andrade ◽  
Roberta Bosso-Martelo ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Silver Nanoparticles ◽  
Compressive Strength ◽  
Antibacterial Activity ◽  
Calcium Silicate ◽  
Setting Time ◽  
Antibacterial Properties ◽  
Mineral Trioxide Aggregate ◽  
Biological Properties ◽  
Calcium Silicate Cements

Abstract Mineral trioxide aggregate (MTA) and Portland cement (PC) are calcium silicate cements. They have similar physicochemical, mechanical and biological properties. The addition of zirconium oxide (ZrO2) to PC provides radiopacity. Silver nanoparticles (AgNPs) may improve some properties of cements. The aim of this study was to evaluate the effect of AgNPs on physicochemical/mechanical properties and antibacterial activity of white MTA (WMTA) and PC associated with ZrO2. The following materials were evaluated: WMTA; PC 70% + ZrO2 30%; WMTA+ AgNPs; and PC 70% + ZrO2 30% + AgNPs. The study evaluated radiopacity, setting time, pH, compressive strength and solubility. For radiopacity analysis, radiographs were made alongside an aluminum (Al) step wedge. To evaluate the antibacterial activity, direct contact test was performed on planktonic cells and Enterococcus faecalis biofilm induced on bovine root dentin for 14 days. The experimental periods were 5 and 15 h. Data were obtained as CFU mL-1. The obtained data were submitted to ANOVA and Tukey tests (p<0.05). The addition of AgNPs to WMTA increased the pH, lowered the solubility and the initial and final setting times. The addition of AgNPs to PC/ZrO2 maintained the pH, lowered the solubility, and increased the setting time and compressive strength. The radiopacity of all materials was higher than 4 mmAl. The addition of AgNPs promoted an increase in antibacterial activity for calcium silicate cements and favored the physicochemical and mechanical properties of the materials.

scholarly journals Studies on Poly(propylene fumarate-co-caprolactone diol) Thermoset Composites towards the Development of Biodegradable Bone Fixation Devices

2009 ◽  
Vol 2009 ◽  
pp. 1-10 ◽  
Author(s):  
M. Jayabalan
Keyword(s):  
Compressive Strength ◽  
Setting Time ◽  
Hydrolytic Degradation ◽  
Thermoset Composites ◽  
Ringer’S Solution ◽  
Compression Properties ◽  
Reinforced Composite ◽  
Link Density ◽  
Poly Propylene

The effect of reinforcement in the cross-linked poly(propylene fumarate-co-caprolactone diol) thermoset composites based on Kevlar fibres and hydroxyapatite was studied. Cross-linked poly(propylene fumarate-co-caprolactone diol) was also studied without any reinforcement for comparison. The reinforcing fibre acts as a barrier for the curing reaction leading to longer setting time and lesser cross-link density. The fibre and HA reinforced composites have almost the same compressive strength. Nonreinforced material undergoes greater degree of swelling. Among the reinforced materials, the hydroxyapatite reinforced composite has a much higher swelling percentage than the fibre reinforced one. The studies on in vitro degradation of the cured materials reveal hydrolytic degradation in Ringer's solution and PBS medium during aging. All the three materials are found to swell initially in Ringer's solution and PBS medium during aging and then undergo gradual degradation. Compression properties of these cross-linked composites increase with aging; HA reinforced composite has the highest compressive strength and compressive modulus, whereas the aged fibre-reinforced composite has the least compressive strength and modulus.

scholarly journals Effect of the Bis-Dimethylamino Benzydrol Coinitiator on the Mechanical and Biological Properties of a Composite

2017 ◽  
Vol 28 (6) ◽  
pp. 744-748
Author(s):  
Bruna Fortes Bittencourt ◽  
John Alexis Dominguez ◽  
Luís Antonio Pinheiro ◽  
Paulo Vitor Farago ◽  
Elizabete Brasil dos Santos ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Elastic Modulus ◽  
Biological Properties ◽  
In Vitro Cytotoxicity ◽  
3T3 Fibroblasts ◽  
Post Test ◽  
Ft Ir ◽  
Fibroblastic Cells

Abstract To examine the effect of the alternative coinitiator 4,4’bis dimethylamino benzydrol (BZN) in degree of conversion (DC), mechanical and biological properties of experimental composites. The coinitiator BZN was used in three concentrations (0.2, 0.5 and 1.2%), and the coinitiator DMAEMA was used as control at the same concentrations as above. The molar concentration of camphorquinone (CQ) and coinitiators was kept constant (1:1). The composites were manipulated and submitted to microhardness test (VHN), flexural and compressive strength (in MPa), elastic modulus (GPa), DC (FT-IR) and in vitro cytotoxicity (against 3T3 fibroblastic cells) of the experimental resins. Data were subjected to two-way ANOVA and Tukey post-test (α=0.05). The experimental composite resin with BZN showed higher DC values compared to control DMAEMA groups. For the mechanical properties, microhardness values were higher in BZN groups; flexural strength and elastic modulus were similar between all the groups. Compressive strength for groups BZN0.5 and DMAEMA0.5 were not statistically different, being the lowest values attributed to group BZN0.2. The experimental resins with BZN and DMAEMA were considered nontoxic against 3T3 fibroblasts. The inclusion of the coinitiator BZN in experimental composites was considered nontoxic against 3T3 fibroblast cells, without compromising DC and mechanical properties.

scholarly journals Enhancing the mechanical properties and cytocompatibility of magnesium potassium phosphate cement by incorporating oxygen-carboxymethyl chitosan

2020 ◽  
Author(s):  
Changtian Gong ◽  
Shuo Fang ◽  
Kezhou Xia ◽  
Jingteng Chen ◽  
Liangyu Guo ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Physicochemical Properties ◽  
Bone Cement ◽  
Ph Value ◽  
Setting Time ◽  
Potassium Phosphate ◽  
Carboxymethyl Chitosan ◽  
Bioactive Substances ◽  
Magnesium Potassium Phosphate Cement

Abstract Incorporating bioactive substances into synthetic bioceramic scaffolds is challenging. In this work, oxygen-carboxymethyl chitosan (O-CMC), a natural biopolymer that is nontoxic, biodegradable and biocompatible, was introduced into magnesium potassium phosphate cement (K-struvite) to enhance its mechanical properties and cytocompatibility. This study aimed to develop O-CMC/magnesium potassium phosphate composite bone cement (OMPC), thereby combining the optimum bioactivity of O-CMC with the extraordinary self-setting properties and mechanical intensity of the K-struvite. Our results indicated that O-CMC incorporation increased the compressive strength and setting time of K-struvite and decreased its porosity and pH value. Furthermore, OMPC scaffolds remarkably improved the proliferation, adhesion and osteogenesis related differentiation of MC3T3-E1 cells. Therefore, O-CMC introduced suitable physicochemical properties to K-struvite and enhanced its cytocompatibility for use in bone regeneration.

scholarly journals A COMPARATIVE EVALUATION OF MICROLEAKAGE, COMPRESSIVE STRENGTH, FLEXURAL STRENGTH AND FLUORIDE RELEASE OF ZIRCONOMER AND KETAC SILVER: AN IN VITRO STUDY.

2020 ◽  
Vol 9 (4) ◽  
Author(s):  
CHARANTEJA VEMAGIRI ◽  
Uloopi KS ◽  
Vinay Chandrappa ◽  
Anusha Ch
Keyword(s):  
Compressive Strength ◽  
Flexural Strength ◽  
Testing Machine ◽  
In Vitro Study ◽  
Biological Properties ◽  
T Test ◽  
Fluoride Release ◽  
Restorative Material ◽  
Glass Ionomer

Background: A successful restorative material forms a better adhesion, resist the microleakage and releases fluoride. However, existing glass ionomer cements cannot be used as a posterior restorative material in stress bearing areas. A new ionomer called Zirconomer, zirconia reinforced glass ionomer claims to exhibit high physical and biological properties. Aim: To assess and compare the microleakage, compressive strength, flexural strength and fluoride release from zirconomer with ketac silver. Materials & Methods: On twenty caries free premolar teeth (10 per each group), a class v cavity was restored with zirconomer and ketac silver. The microleakage was assessed using dye penetration test and stereomicroscope. The compressive and flexural strengths of these materials were measured using Instron Universal testing machine. The amount of fluoride released from the modified ionomers at pH 5 and pH 7 was estimated using Orion fluoride specific electrode. The obtained data was then subjected to statistical analysis. Results: Data was analysed using paired t-test for intergroup comparisons and unpaired t-test for intragroup comparisons. The overall microleakage (0.5±0.48) of zirconomer was significantly less (p=0.000) compared to ketac silver (1.9±0.83). Zirconomer demonstrated a significant higher compressive strength (330.25±60.14), flexural strength (33.058±2.36) than ketac silver (p= 0.000). Zirconomer demonstrated high fluoride release from day 1 to day 7 at both pH 5 and pH 7. Conclusion: Zirconomer demonstrated better physical and biological properties compared with ketac silver.

Effect of Metakaolin on Geopolymer Industry

2019 ◽  
pp. 49-70
Keyword(s):  
Mechanical Properties ◽  
Compressive Strength ◽  
Flexural Strength ◽  
Reaction Mechanisms ◽  
Ordinary Portland Cement ◽  
Setting Time ◽  
Experimental Studies ◽  
Acid Attack ◽  
Repair Materials ◽  
Hardened State

This chapter discusses the effects of metakaolin (MK) on geopolymer mortar and concrete industries. The research topics of MK-based geopolymer cover reaction mechanisms and kinetics. This chapter aims at augmenting knowledge about enhancing mechanical properties of geopolymer mortars/concrete using MK. Specifically, this chapter presents literature studies as well as current experimental studies which delineate the effect of MK on fresh and hardened-state properties of geopolymer mortars (GPMs). Properties and characteristics of metakaolin are explained followed by properties of fresh MK mortars. Properties of hardened MK concrete and durability aspects of MK mortars are explained. Applications of MK-based geopolymers and metakaolin-based geopolymers as repair materials are also included in this chapter. The results of using MK-based GPMs revealed improved workability, enhanced setting time, increased density, higher compressive strength, flexural strength, and resistance against acid attack than conventional ordinary portland cement mortar/concrete.

[MeArg1, NLe10]-apelin-12: Optimization of solid-phase synthesis and evaluation of biological properties in vitro and in vivo

Peptides ◽  
2020 ◽  
Vol 129 ◽  
pp. 170320 ◽  
Author(s):  
Maria Sidorova ◽  
Irina Studneva ◽  
Valery Bushuev ◽  
Marina Pal’keeva ◽  
Alexander Molokoedov ◽  
...  
Keyword(s):  
Solid Phase Synthesis ◽  
Solid Phase ◽  
Biological Properties ◽  
Phase Synthesis

scholarly journals Physical and Biological Properties of a High-Plasticity Tricalcium Silicate Cement

2018 ◽  
Vol 2018 ◽  
pp. 1-6 ◽  
Author(s):  
Arthur Dias Galarça ◽  
Wellington Luiz de Oliveira Da Rosa ◽  
Tiago Machado Da Silva ◽  
Giana da Silveira Lima ◽  
Neftalí Lenin Villarreal Carreño ◽  
...  
Keyword(s):  
Compressive Strength ◽  
Film Thickness ◽  
Cell Viability ◽  
Water Solubility ◽  
Setting Time ◽  
Mineral Trioxide Aggregate ◽  
Biological Properties ◽  
High Plasticity ◽  
Silicate Matrix ◽  
Time Flow

Introduction. Mineral Trioxide Aggregate (MTA) is a tricalcium-based silicate, dicalcium silicate matrix. Despite its good biologic properties, some clinicians still claim to have difficulties in handling MTA after its preparation due to its sandy consistency. The aim of the present study was to evaluate the physicochemical properties and cytotoxicity of MTA Repair HP (Angelus, Londrina, PR, Brazil) compared with MTA Angelus (Angelus, Londrina, PR, Brazil). Materials and Method. The properties assessed were particle size, setting time, flow, film thickness, radiopacity, water solubility, compressive strength, and cytotoxicity. Statistical analysis was performed considering p < 0.05 as statistically significant. Results. For radiopacity, water absorption and solubility MTA Repair HP were statistically similar to MTA Angelus. The MTA Angelus had statistically different film thickness values, higher than MTA Repair HP (p < 0.05). Besides, MTA Angelus showed a lower and statistically different compressive strength after 28 days than MTA Repair HP (p<0.05). Additionally, MTA Repair HP set more slowly (p < 0.05). Relative to cell viability, MTA Repair HP was statistically similar to MTA Angelus after 24 and 48 h in cell viability. Conclusions. The MTA Repair HP presented similar cell viability, lower film thickness, higher flow, setting time, and compressive strength values after 28 days than MTA Angelus. In general, the MTA Repair HP presented physicochemical and biological properties similar to the MTA Angelus.

Biodegradable Bone Cement Using Calcium Phosphate Glass

2006 ◽  
Vol 309-311 ◽  
pp. 861-864 ◽  
Author(s):  
Byung Hyun Lee ◽  
Min Chul Kim ◽  
Kyoung Nam Kim ◽  
Kwang Mahn Kim ◽  
Seong Ho Choi ◽  
...  
Keyword(s):  
Weight Loss ◽  
Compressive Strength ◽  
Calcium Phosphate ◽  
Simulated Body Fluid ◽  
Dissolution Rate ◽  
Phosphate Glass ◽  
Body Fluid ◽  
Setting Time ◽  
Ageing Test ◽  
Dynamic Assay

In preliminary ageing test, the cement using only calcium phosphate glass as power phase cracked with 1 day in simulated body fluid because of high dissolution rate of the cement. We added 30 wt% of either β-TCP or HA to 70 wt% calcium phosphate glass as powder phase to control the dissolution rate of the cement and performed in vitro ageing test in simulated body fluid by dynamic protocol as well as static protocol to confirm the possibility of controlling. Adding either β-TCP or HA to the cement increases the setting time and decreases the compressive strength. In dynamic assay, the pH of extract is maintained over 7. However, pH decreased to around 5 in static assay. Therefore, weight loss by static protocol continuously increased for 14 days, while weight loss by dynamic protocol almost saturated. In XRD patterns of ageing cements, CaO peaks appeared. CaO peak was maximized most lately in dynamic assay of the cement adding HA and within 7 days, the cement adding HA showed higher weight loss. It is indicated that CaO formed in surface of the cement hinder the dissolution of the cement. In addition, compressive strength increased when the CaO peak was maximized.

scholarly journals Evaluation of the Biological Properties and Cross-Reactive Antibody Response to H10 Influenza Viruses in Ferrets

2017 ◽  
Vol 91 (19) ◽  
Author(s):  
Troy C. Sutton ◽  
Elaine W. Lamirande ◽  
Rita Czako ◽  
Kanta Subbarao
Keyword(s):  
Weight Loss ◽  
Antibody Response ◽  
Viral Replication ◽  
Vaccine Strain ◽  
Biological Properties ◽  
Sialic Acids ◽  
Influenza Viruses ◽  
Species Barrier ◽  
Reactive Antibody

ABSTRACT The recent outbreak of avian origin H10N7 influenza among seals in northern Europe and two fatal human infections with an avian H10N8 virus in China have demonstrated that H10 viruses can spread between mammals and cause severe disease in humans. To gain insight into the potential for H10 viruses to cross the species barrier and to identify a candidate vaccine strain, we evaluated the in vitro and in vivo properties and antibody response in ferrets to 20 diverse H10 viruses. H10 virus infection of ferrets caused variable weight loss, and all 20 viruses replicated throughout the respiratory tract; however, replication in the lungs was highly variable. In glycan-binding assays, the H10 viruses preferentially bound “avian-like” α2,3-linked sialic acids. Importantly, several isolates also displayed strong binding to long-chain “human-like” α2,6-linked sialic acids and exhibited comparable or elevated neuraminidase activity relative to human H1N1, H2N2, and H3N2 viruses. In hemagglutination inhibition assays, 12 antisera cross-reacted with ≥14 of 20 H10 viruses, and 7 viruses induced neutralizing activity against ≥15 of the 20 viruses. By combining data on weight loss, viral replication, and the cross-reactive antibody response, we identified A/mallard/Portugal/79906/2009 (H10N7) as a suitable virus for vaccine development. Collectively, our findings suggest that H10 viruses may continue to sporadically infect humans and other mammals, underscoring the importance of developing an H10 vaccine for pandemic preparedness. IMPORTANCE Avian origin H10 influenza viruses sporadically infect humans and other mammals; however, little is known about viruses of this subtype. Thus, we characterized the biological properties of 20 H10 viruses in vitro and in ferrets. Infection caused mild to moderate weight loss (5 to 15%), with robust viral replication in the nasal tissues and variable replication in the lung. H10 viruses preferentially bind “avian-like” sialic acids, although several isolates also displayed binding to “human-like” sialic acid receptors. This is consistent with the ability of H10 viruses to cross the species barrier and warrants selection of an H10 vaccine strain. By evaluating the cross-reactive antibody response to the H10 viruses and combining this analysis with viral replication and weight loss findings, we identified A/mallard/Portugal/79906/2009 (H10N7) as a suitable H10 vaccine strain.

Sign in / Sign up

Export Citation Format

Share Document