scholarly journals Drying kinetics and effective diffusion of buckwheat grains

2020 ◽  
Vol 44 ◽  
Author(s):  
Valdiney Cambuy Siqueira ◽  
Rafael Araújo Leite ◽  
Geraldo Acácio Mabasso ◽  
Elton Aparecido Siqueira Martins ◽  
Wellytton Darci Quequeto ◽  
...  
Keyword(s):  
Effective Diffusion ◽  
Information Criterion ◽  
Drying Kinetics ◽  
Drying Rate ◽  
Linear Regression Method ◽  
Drying Process ◽  
Food Sector ◽  
Drying Time ◽  
Air Speed ◽  
Kinetics Of

ABSTRACT Buckwheat has become important in the food sector as its flour does not contain gluten. Since buckwheat is a relatively new crop in the agricultural environment, there is little information available regarding its processing. Drying is one of the most important post-harvest stages of buckwheat. The aim of the present study was to describe the drying process of buckwheat grains. Buckwheat grains with a moisture content of 0.41 ± 0.01 (dry basis, d.b.) were harvested, followed by drying in an experimental dryer at the temperatures of 40, 50, 60, 70, and 80 °C, at an air speed of 0.8 m s-1. The drying rate was determined, and the mathematical models generally employed to describe the drying process of several agricultural products were fitted to the experimentally obtained data. Model selection was based on the Gauss-Newton non-linear regression method and was complemented by Akaike Information Criterion and Schwarz’s Bayesian Information Criterion. It was concluded that the drying rate increased with an increase in temperature and decreased with an increase in drying time. It is recommended to use the Midilli model to represent the drying kinetics of buckwheat grains at the temperatures of 40, 60, and 70 °C, while the Approximation of diffusion model is recommended for the temperatures of 50 and 80 °C. The magnitudes of effective diffusion coefficients ranged from 1.8990 × 10-11 m2 s-1 to 17.8831 × 10-11 m2 s-1. The activation energy required to initiate the drying process was determined to be 49.75 kJ mol-1.

scholarly journals Drying kinetics of mango fruit using tray and oven dryer

2020 ◽  
Vol 3 (2) ◽  
pp. 51
Author(s):  
Nurhasmanina Norhadi ◽  
Ammar Mohd Akhir ◽  
Nor Roslina Rosli ◽  
Farid Mulana
Keyword(s):  
Moisture Content ◽  
Drying Kinetics ◽  
Drying Rate ◽  
Airflow Rate ◽  
Drying Process ◽  
Air Velocity ◽  
Mango Fruit ◽  
Drying Time ◽  
Different Temperatures ◽  
Kinetics Of

Drying is generally used to increase the shelf life of food products. In this context, mango fruit is used as a sample for the drying process because of its high commercial value and particularly high moisture content. The mango was sliced into few batches of sample with a size of 20 mm × 30 mm × 5 mm each. The experiments were conducted using tray and oven dryer at different temperatures of 40, 50 and 60 °C with a steady airflow rate of 1.3 m/s. The objectives are to study the effect of drying time, temperature and air velocity towards drying of mango fruit, to compare the physical characteristics of mango sample after drying and to determine the best drying kinetics model fitted to each tray and oven dryer. The results showed that the increase in drying time, temperature and air velocity would reduce the moisture content while at the same time, drying rate increased significantly. Tray dryer was found to be more effective than oven dryer because of higher drying rate with better product quality and appearance at the end. Furthermore, the gathered data were fitted into few widely used drying mathematical models and it was found that Henderson and Pabis model at 60°C is best suited for tray dryer whereas Page model at 40 °C is the best for oven dryer.

scholarly journals Drying kinetics of jabuticaba pulp by regression models

2019 ◽  
Vol 41 (1) ◽  
Author(s):  
Thais Destefani Ribeiro Furtado ◽  
Joel Augusto Muniz ◽  
Edilson Marcelino Silva ◽  
Jaqueline Gonçalves Fernandes
Keyword(s):  
Regression Models ◽  
Information Criterion ◽  
Drying Kinetics ◽  
Moisture Loss ◽  
Model Parameters ◽  
Drying Rate ◽  
Southern Brazil ◽  
Drying Time ◽  
Kinetics Of ◽  
Selection Of

Abstract Jabuticaba tree is native to the Atlantic Forest in Southern Brazil, and its fruit is widely consumed in the fresh form, but it is highly perishable, requiring conservation techniques. The aim of this study was to describe the drying kinetics of jabuticaba pulp at temperatures of 50 and 60°C, comparing the Henderson, Simple Three-Parameter Exponential, Lewis, Thompson, Fick and Wang and Sing regression models and estimating the Absolute Drying Rate (ADR) for the best model. Parameters were estimated using the SAS software. The evaluation of the quality in the adjustment and selection of models was made based on the adjusted determination coefficient, Residual Standard Deviation and Akaike Information Criterion. Models presented good adjustment to data, and the Lewis model was the most suitable to describe the drying kinetics of jabuticaba pulp at temperatures of 50 and 60°C, with drying rate of 0.000063 and 0.000082 g of water/s respectively. ADR indicated that in one third of the drying time, 70% of moisture loss occurred at both temperatures and after this period, there was a deceleration of moisture loss until stabilization, when equilibrium moisture content is reached.

scholarly journals Drying kinetics of blackberry leaves

2018 ◽  
Vol 22 (8) ◽  
pp. 570-576 ◽  
Author(s):  
Elton A. S. Martins ◽  
André L. D. Goneli ◽  
Alexandre A. Goncalves ◽  
Cesar P. Hartmann Filho ◽  
Valdiney C. Siqueira ◽  
...  
Keyword(s):  
Activation Energy ◽  
Diffusion Coefficient ◽  
Effective Diffusion Coefficient ◽  
Effective Diffusion ◽  
Fixed Bed ◽  
Drying Kinetics ◽  
Drying Time ◽  
Thin Layer Drying ◽  
Air Speed ◽  
Kinetics Of

ABSTRACT Blackberry leaves have some pharmacological properties and one of the most widespread and studied uses is to relieve symptoms of the climacteric and other symptoms during the premenstrual period. Thus, drying becomes important for the conservation and storage of the product until its use or processing. The present study aimed to evaluate the drying kinetics of blackberry leaves, as well as to determine the effective diffusion coefficient and the activation energy during the drying process. Blackberry leaves were dried in an experimental fixed-bed dryer under four controlled temperature conditions (40, 50, 60 and 70 °C) and two drying air speeds (0.4 and 0.8 m s-1). With the experimental data of moisture ratio, eight mathematical models were fitted to represent the process of thin-layer drying of agricultural products. Based on the obtained results, it was found that the Midilli model represented best the phenomenon of drying of blackberry leaves. The increase in temperature and air speed reduced the drying time of blackberry leaves and increased the values of the effective diffusion coefficient. This relation can be described by the Arrhenius equation, which has an activation energy for the liquid diffusion during drying of 65.94 and 66.08 kJ mol-1, for drying air speeds of 0.4 and 0.8 m s-1, respectively.

scholarly journals The Effect of Vacuum Impregnation Pretreatment on Air-Drying Kinetics of Pears

2020 ◽  
Vol 8 (11) ◽  
pp. 2248-2254
Author(s):  
Şeyma Uysal ◽  
Fikret Pazır
Keyword(s):  
Effective Diffusion ◽  
Solution Concentration ◽  
Drying Kinetics ◽  
Vacuum Impregnation ◽  
Drying Process ◽  
Drying Time ◽  
Air Drying ◽  
Pyrus Communis L ◽  
Experimental Values ◽  
Kinetics Of

The aim of this study was to examine the drying kinetics of pears (Pyrus communis L.) with and without vacuum impregnation and under the different temperature by using tray dryer. Vacuum impregnation were applied to the the pears (15 mm thickness, 65 mm outer and 20 mm inner dimensions respectively) with the conditions of 50⁰ Brix impregnation solution concentration, 225 mbar vacuum pressure and 45 min vacuum time. Drying process was carried out at temperatures of 55, 65 and 75°C. Drying time of non-vacuum impregnated pears was determined 640, 500 and 340 min and vacuum impregnated pears was determined 700, 540 and 560 min respectively. Page, Exponential, Henderson and Pabis, Diffusion Approach were examined for testing the drying kinetics. Experimental values are in accordance with the expected values resulted Page and Difussion models of with and without vacuum impregnated pears. Effective diffusion coefficient (Deff) was varying 2.74×10-11 to 7.31×10-11 m2/s. m2/s with respect to the drying temperatures. The activation energy for the non-vacuum impregnated and vacuum impregnated pears was 32.93 kJ / mol and 24.25 kJ / mol, respectively.

scholarly journals Drying Kinetics of Noni Seeds

2019 ◽  
Vol 11 (5) ◽  
pp. 250 ◽  
Author(s):  
Wellytton Darci Quequeto ◽  
Osvaldo Resende ◽  
Patrícia Cardoso Silva ◽  
Fábio Adriano Santos e Silva ◽  
Lígia Campos de Moura Silva
Keyword(s):  
Experimental Data ◽  
Activation Energy ◽  
Diffusion Coefficient ◽  
Moisture Content ◽  
Mathematical Models ◽  
Effective Diffusion Coefficient ◽  
Effective Diffusion ◽  
Information Criterion ◽  
Drying Kinetics ◽  
Kinetics Of

Noni seeds have been used for years as an important medicinal source, with wide use in the pharmaceutical and food industry. Drying is a fundamental process in the post-harvest stages, where it enables the safe storage of the product. Therefore, the present study aimed to fit different mathematical models to experimental data of drying kinetics of noni seeds, determine the effective diffusion coefficient and obtain the activation energy for the process during drying under different conditions of air temperature. The experiment used noni seeds with initial moisture content of 0.46 (decimal, d.b.) and dehydrated up to equilibrium moisture content. Drying was conducted under different controlled conditions of temperature, 40; 50; 60; 70 and 80 ºC and relative humidity, 24.4; 16.0; 9.9; 5.7 and 3.3%, respectively. Eleven mathematical models were fitted to the experimental data. The parameters to evaluate the fitting of the mathematical models were mean relative error (P), mean estimated error (SE), coefficient of determination (R2), Chi-square test (c2), Akaike Information Criterion (AIC) and Schwarz’s Bayesian Information Criterion (BIC). Considering the fitting criteria, the model Two Terms was selected to describe the drying kinetics of noni seeds. Effective diffusion coefficient ranged from 8.70 to 23.71 × 10-10 m2 s-1 and its relationship with drying temperature can be described by the Arrhenius equation. The activation energy for noni seeds drying was 24.20 kJ mol-1 for the studied temperature range.

scholarly journals Mathematical modeling of pequi pulp drying and effective diffusivity determination

2017 ◽  
Vol 21 (7) ◽  
pp. 493-498 ◽  
Author(s):  
Elisabete P. de Sousa ◽  
Rossana M. F. de Figueirêdo ◽  
Josivanda P. Gomes ◽  
Alexandre J. de M. Queiroz ◽  
Deise S. de Castro ◽  
...  
Keyword(s):  
Experimental Data ◽  
Effective Diffusivity ◽  
Drying Kinetics ◽  
Convective Drying ◽  
Drying Time ◽  
Air Speed ◽  
Drying Curves ◽  
Increasing Temperature ◽  
Kinetics Of ◽  
Best Fit

ABSTRACT The aim of this work was to study the drying kinetics of pequi pulp by convective drying at different conditions of temperature (50, 60, 70 and 80 °C) and thickness (0.5, 1.0 and 1.5 cm) at the air speed of 1.0 m s-1, with no addition of adjuvant. The experimental data of pequi pulp drying kinetics were used to plot drying curves and fitted to the models: Midilli, Page, Henderson & Pabis and Newton. Effective diffusivity was calculated using the Fick’s diffusion model for a flat plate. It was found that, with increasing thickness, the drying time increased and, with increasing temperature, the drying time was reduced. The Midilli model showed the best fit to the experimental data of pequi pulp drying at all temperatures and thicknesses, presenting higher coefficients of determination (R2), indicating that this model satisfactorily represents the pequi pulp drying phenomenon. There was a trend of increase in the effective diffusivity with the increase in pulp layer thickness and temperature.

Experimental Evaluation and Kinetic Analysis of Direct-Contact Ultrasonic Fabric Drying Process

2020 ◽  
Vol 13 (2) ◽  
Author(s):  
Chang Peng ◽  
Saeed Moghaddam
Keyword(s):  
Direct Contact ◽  
Ultrasonic Transducer ◽  
Gaussian Model ◽  
Weibull Model ◽  
Drying Kinetics ◽  
Energy Prices ◽  
Drying Process ◽  
Liquid Form ◽  
Drying Time ◽  
Kinetics Of

Abstract Over the past two decades, due to the rising energy prices and growing awareness about climate change, significant efforts have been devoted to reducing the energy consumption of various home appliances. However, the energy efficiency of clothes dryers has little improvement. Recent innovations in the direct-contact ultrasonic fabric drying technique offer new opportunities for energy saving. In this technique, high-frequency mechanical vibrations generated by the ultrasonic transducer are utilized to atomize water from a fabric in the liquid form, which demonstrates great potential for reducing energy use and drying time of the fabric drying process. Here, for the first time, fabric drying kinetics under different direct-contact ultrasonic drying conditions were investigated experimentally and analytically. The drying processes of four kinds of fabrics were experimentally tested under different ultrasonic transducer vibration frequency (115, 135, and 155 kHz) and input power (1.2, 2.5, and 4.4 W) conditions. According to the experimental data, five different kinds of models were applied to quantify the drying kinetics of fabrics during direct-contact ultrasonic drying. The models not only incorporated the transducer parameters but also the parameters related to the nature of fabric. Our evaluation results of model prediction performance demonstrated that the two empirical models, i.e., the Weibull model and the Gaussian model, were superior to the three semi-theoretical models for anticipating the drying kinetics of fabrics under direct-contact ultrasonic drying. Furthermore, the Weibull model is more suitable for practical energy-efficient direct-contact ultrasonic fabric drying applications compared with the Gaussian model.

Comparison of Drying Kinetics of Maize in Oven and in Pilot Silo Dryer: Influence on Moisture Content and Physical Characteristics

2016 ◽  
Vol 12 (6) ◽  
pp. 599-606 ◽  
Author(s):  
Flávia Daiana Montanuci ◽  
Raphaela Mulato Cavalcante ◽  
Camila Augusto Perussello ◽  
Luiz Mario de Matos Jorge
Keyword(s):  
Moisture Content ◽  
Temperature Increase ◽  
Drying Kinetics ◽  
Final Moisture Content ◽  
Drying Rate ◽  
Drying Time ◽  
Drying Temperature ◽  
Design And Optimization ◽  
Process Kinetics ◽  
Kinetics Of

Abstract The study of process kinetics may aid the design and optimization of drying systems. This paper evaluated the influence of drying temperature (40, 60 and 80 °C) on the moisture content, drying rate, density, shrinkage and breakage of maize dried in two different dryers: oven and silo dryer. In both dryers, the temperature increase reduced drying time, final moisture content and shrinkage of the grains, however increased breakage. Drying rate was higher in the oven (6.4×10−4±2.3×10−4s−1 versus 5.4×10−4±1.2×10−4s−1), while shrinkage (15.2±4.7 % versus 24.4±5.6 %) and density increase (16.6±5.9 % versus 33.4±5.8 %) were more intense in the silo. There was a large release of husk in the silo dryer and the moisture content was slightly smaller in the lower layers respective to the upper ones.

Effect of Air Velocity and Temperature on the Drying Kinetics of Drumstick Leaves (Moringa Oleifera)

2012 ◽  
Vol 8 (4) ◽  
Author(s):  
Monica Premi ◽  
Harish Sharma ◽  
Ashutosh Upadhyay
Keyword(s):  
Experimental Data ◽  
Activation Energy ◽  
Moringa Oleifera ◽  
Moisture Diffusivity ◽  
Drying Kinetics ◽  
Drying Rate ◽  
Air Velocity ◽  
Drying Time ◽  
Effective Moisture ◽  
Kinetics Of

Abstract The present study examines the effect of air velocity on drying kinetics of the drumstick leaves in a forced convective dryer. The drumstick leaves were dried in the temperature range of 50–800 C, at different air velocity (Dv) of 0.5 and 1.3 m/s. The results indicated that drying temperature and air velocity are the factors in controlling the drying rate. Experimental data obtained for the samples for color, drying rate and drying time proved that air velocity of 1.3 m/s yielded the product superior in terms of both quality and energy efficiency as compared to the samples at 0.5 m/s. Activation energy for drumstick leaves dried with air velocity, 0.5 and 1.3 m/s was 12.50 and 32.74 kJ/mol respectively. The activation energy relates similarly with the effective moisture diffusivity which also increased with increase in air velocity and temperature.

scholarly journals Effect of blanching methods on drying kinetics of bell pepper

2011 ◽  
Vol 11 (48) ◽  
pp. 5457-5474
Author(s):  
Toyosi Tunde - Akintunde ◽  
◽  
BO Akintunde ◽  
A Fagbeja ◽  
◽  
...  
Keyword(s):  
Palm Oil ◽  
Water Movement ◽  
Drying Kinetics ◽  
Bell Pepper ◽  
Drying Rate ◽  
Drying Process ◽  
Oil Water ◽  
Drying Rates ◽  
Kinetics Of

Various blanching methods and drying temperatures were applied to bell pepper (Capiscum annum) to investigate the effect on its drying characteristics. Pepper (Capiscum annum) is an abundant and cheap source of vitamins, minerals and fibre. However, its high moisture content makes it susceptible to deterioration. The most common method of preservation is drying but the dried products obtained are of reduced nutritional qualities. Pretreatment of pepper before drying improves the quality of the dried pepper and increases its drying rate. Steam and water blanching as a form of pretreatment has been reported to increase drying rate and improve the quality of dried products but there is not much information on other types of oil/water blanching methods. The effect of blanching (steam, water, palm oil/water and groundnut oil/water) as a pretreatment on the drying kinetics of bell pepper dried at temperatures of 50, 60, 70, 80 and 90o C, was studied. Drying of raw untreated bell pepper was taken as a control. The results indicate that water removal at the initial stage of the drying process was highest and there was a rapid decrease as drying continued until equilibrium was reached at the end of process. The blanched samples generally had higher drying rates (at p<0.05) than the untreated samples. The values for the drying rate for steam and water blanched samples were higher (but not at p<0.05) than the drying rates for samples blanched in oil/water mixtures. The drying rate as well as effective moisture diffusivity, Deff, increased with increasing drying temperature. Values of Deff varied from 3.55 x 10-9 m 2/s to 2.34 x 10-9 m 2/s with the highest being SB (steam blanched) at 80oC and the lowest UB (unblanched) at 50oC. The drying process took place mainly in the falling rate period. The activation energies varied from 39.59 to 83.87 kJ/mol, with PB (palm oil/water blanched) samples having the lowest and UB having the highest Ea value. The lower values for pretreated samples imply that water movement from the internal regions is faster in pretreated samples. This suggests that blanching as a method of pretreatment generally increases water diffusion.

Sign in / Sign up

Export Citation Format

Share Document