scholarly journals Building form and energy efficiency in tropical climates: A case study of Penang, Malaysia

2021 ◽  
Vol 13 ◽  
Author(s):  
Maryam Mohsenzadeh ◽  
Massoomeh Hedayati Marzbali ◽  
Mohammad Javad Maghsoodi Tilaki ◽  
Aldrin Abdullah
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Energy Demand ◽  
Simulation Analysis ◽  
Energy Performance ◽  
Design Strategies ◽  
Building Shape ◽  
Suitable Form ◽  
Tropical Climates ◽  
Building Form

Abstract Malaysia is a nation that has undergone a massive development based on its abundance of fuel supply. The imbalance ratio between gross domestic products and energy demand clearly indicates the need to promote energy-efficiency strategies in the country. This study investigates the relationship between building shape and energy consumption by considering the control of excessive solar radiation in a tropical climate. In the first step, four basic plan geometries, namely, square, rectangle, triangle and circle shapes, are studied to determine the optimal building shape in terms of energy consumption in Penang, Malaysia. Results of simulation analysis using DesignBuilder software (Version 5.4.0) reveal that the circle is the most suitable form in terms of energy performance. In the second step, all buildings with extended shapes based on the optimal shape obtained from the first step are simulated under the same condition to analyse the thermal behaviour of different building forms. Amongst four alternative extended cases, Case 3 with 90 cm depth and without vertical offset from the top of the window has superior energy performance and sufficient natural daylight. This study contributes to enhance energy efficiency of new buildings by incorporating design strategies in the design process.

scholarly journals Application of Rough Set Theory (RST) to Forecast Energy Consumption in Buildings Undergoing Thermal Modernization

Energies ◽  
2020 ◽  
Vol 13 (6) ◽  
pp. 1309 ◽  
Author(s):  
Tomasz Szul ◽  
Stanisław Kokoszka
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Set Theory ◽  
Rough Set ◽  
Energy Demand ◽  
Rough Set Theory ◽  
Residential Buildings ◽  
Simple Procedure ◽  
Energy Performance ◽  
Improve Energy Efficiency

In many regions, the heat used for space heating is a basic item in the energy balance of a building and significantly affects its operating costs. The accuracy of the assessment of heat consumption in an existing building and the determination of the main components of heat loss depends to a large extent on whether the energy efficiency improvement targets set in the thermal upgrading project are achieved. A frequent problem in the case of energy calculations is the lack of complete architectural and construction documentation of the analyzed objects. Therefore, there is a need to search for methods that will be suitable for a quick technical analysis of measures taken to improve energy efficiency in existing buildings. These methods should have satisfactory results in predicting energy consumption where the input is limited, inaccurate, or uncertain. Therefore, the aim of this work was to test the usefulness of a model based on Rough Set Theory (RST) for estimating the thermal energy consumption of buildings undergoing an energy renovation. The research was carried out on a group of 109 thermally improved residential buildings, for which energy performance was based on actual energy consumption before and after thermal modernization. Specific sets of important variables characterizing the examined buildings were distinguished. The groups of variables were used to estimate energy consumption in such a way as to obtain a compromise between the effort of obtaining them and the quality of the forecast. This has allowed the construction of a prediction model that allows the use of a fast, relatively simple procedure to estimate the final energy demand rate for heating buildings.

scholarly journals Finding Alternative Methods for Controlling the Power Shortage in Kurdistan through Improving Buildings’ Energy Performance

2018 ◽  
Vol 7 (4) ◽  
pp. 124
Author(s):  
Kawar T. Salih
Keyword(s):  
Energy Efficiency ◽  
Developing Countries ◽  
Energy Consumption ◽  
Energy Demand ◽  
Building Design ◽  
Energy Performance ◽  
Alternative Methods ◽  
Research Approach ◽  
Building Sector

The power shortage is one of the major problems in developing countries. Kurdistan Region of Iraq suffers from this issue, like other developing countries. Especially, after the economy crises that has started in 2014. However, all its efforts for tackling this challenge has been in providing more energy supply stations and more fuel provision. Few studies have been found in the region that seek the relation between the quality of buildings and energy consumption. It is questioned if the building sector in Kurdistan is well managed and environmentally sufficient to consume minimum amount of energy since it is the largest energy consuming sector. This research will seek an alternative to decrease the energy demand in buildings instead of expanding the energy sector. This could be achieved by evaluating the quality of building sector environmentally and improving it. Providing guidelines for building’s thermal regulations, passive building design and increasing the energy efficiency of buildings by renewal means could be alternative strategies for lowering the energy consumption. Theoretical and numerical research approach have been taken in to account for finding the answer through a case study and comparative analysis. A variation of 21-29% of power consumption can be observed between buildings that have not considered energy efficiency criteria in their design and those who reflected them more in the design.

scholarly journals Study of the Improvement on Energy Efficiency for a Building in the Mediterranean Area by the Installation of a Green Roof System

Energies ◽  
2020 ◽  
Vol 13 (5) ◽  
pp. 1246 ◽  
Author(s):  
Elisa Peñalvo-López ◽  
Javier Cárcel-Carrasco ◽  
David Alfonso-Solar ◽  
Iván Valencia-Salazar ◽  
Elias Hurtado-Pérez
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Energy Demand ◽  
Simulation Analysis ◽  
Green Roof ◽  
Mediterranean Area ◽  
Substantial Improvement ◽  
Winter Period ◽  
Reduction Of Energy Consumption ◽  
Heating Energy Demand

Rooftop gardens ona building have proved to be a good way to improve its storm water management, but many other benefits can be obtained from the installation of these systems, such as reduction of energy consumption, decrease of the heat stress, abatement on CO2 emissions, etc. In this paper, the effect from the presence of these rooftop gardens on abuilding’s energy consumption has been investigated by experimental campaigns using a green roof ona public building in a Mediterranean location in Spain. The obtained results demonstrate a substantial improvement by the installation of the green roof onthe building’s cooling energy demand for a standard summer day, in the order of 30%, and a reduction, about 15%, in the heating energy demand for a winter day. Thus, given the longer duration of the summer conditions along the year, a noticeable reduction on energy demand could be obtained. Simulation analysis, using commercial software TRNSYS code, previously calibrated using experimental data for typical summer and winter days, allows for the extrapolation to the entire year of these results deducing noticeable improvement in energy efficiency, in the order of 19%, but with an increase of 6% in the peak power during the winter period.

A COMPARATIVE STUDY: DESIGN STRATEGIES FOR ENERGY-EFFICIENCY OF HIGH-RISE OFFICE BUILDINGS

2016 ◽  
Vol 11 (1) ◽  
pp. 134-158 ◽  
Author(s):  
Babak Raji ◽  
Martin J. Tenpierik ◽  
Andy van den Dobbelsteen
Keyword(s):  
Comparative Study ◽  
Tall Buildings ◽  
Energy Performance ◽  
Design Strategies ◽  
Design Elements ◽  
High Rise ◽  
Wide Range ◽  
Lighting Energy ◽  
Tropical Climates ◽  
Building Form

Tall buildings are being designed and built across a wide range of cities. A poorly designed tall building can tremendously increase the building's appetite for energy. Therefore, this paper aims to determine the design strategies that help a high-rise office building to be more energy efficient. For this purpose, a comparative study on twelve case buildings in three climate groups (temperate, sub-tropical & tropical) was performed. The exterior envelope, building form and orientation, service core placement, plan layout, and special design elements like atria and sky gardens were the subject of investigation. effectiveness of different design strategies for reducing the cooling, heating, ventilation and electric lighting energy usage. Finally, lessons from these buildings' were defined for the three climates. Furthermore, a comparison of building energy performance data with international benchmarks confirmed that in temperate and sub-tropical climates sustainable design strategies for high-rise buildings were performing well, as a result leading to lower energy consumption. However, for the tropics the design of high-rise buildings needs additional consideration.

Energy efficiency in the design of buildings

2007 ◽  
Author(s):  
Gerhard Dell ◽  
Christiane Egger
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Energy Demand ◽  
Building Design ◽  
Space Heating ◽  
Design Strategies ◽  
External Energy ◽  
Increase Energy Efficiency ◽  
Energy Technologies ◽  
Private Households

The buildings sector accounts for 40% of European energy requirements. Two thirds of the energy used in European buildings is consumed by private households, and their consumption is growing every year as rising living standards lead to an increased use of air conditioning and heating systems. Research shows that more than one-fifth of the present energy consumption and up to 30–45 million tonnes of CO2 per year could be saved by 2010 by applying more ambitious standards both to new and refurbished buildings–these savings would represent a considerable contribution to meeting the European Kyoto targets (European Council, 2002). Without comprehensive measures, energy consumption and CO2 emissions from the building sector will continue to grow. Sustainable energy strategies for buildings will therefore increase in importance. Even today, so-called ‘zero emission buildings’ can be realized with existing planning approaches and technologies. Such buildings do not need an external energy input (for example from oil, gas or supplied electricity) other than solar energy. This is achieved by a combination of a high-level of energy efficiency and renewable energy technologies. This chapter focuses on buildings in the housing and service sectors, presents new building design strategies, technologies, and building components as well as the new legal framework set by the European Buildings Directive. It also discusses the question of raising awareness, and presents some thoughts on how changing life patterns may impact the buildings of the future. Residential buildings mainly need energy for space heating; with present building standards, space heating represents about 70% of the overall energy demand of existing buildings. In many European countries there are substantial efforts to increase energy efficiency—nevertheless, not all the potential for energy savings has been realized by far, and oil is still a major energy source for heating. In recent years, heat demand for new buildings was reduced significantly by technical measures. However, the number of low energy or passive buildings in Europe is still very limited, despite the fact that they can be constructed at acceptable costs.

scholarly journals Energy Efficiency Evaluation of Different Glazing and Shading Systems in a School Building

2019 ◽  
Vol 111 ◽  
pp. 03052 ◽  
Author(s):  
Mohammed Khalaf ◽  
Touraj Ashrafian ◽  
Cem Demirci
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Energy Demand ◽  
Energy Performance ◽  
Building Envelope ◽  
School Building ◽  
Total Energy Consumption ◽  
Heating And Cooling ◽  
Lighting Energy ◽  
Energy Efficiency Evaluation

The energy conversations methods and techniques take a significant role in the energy performance of the buildings. Façade and shading systems are in continuous development, and recent studies are showing the importance of implementation of such systems to reduce energy consumption and enhance the effectiveness of the building performance. School buildings are mostly being used during daytime, hence, require active use of sunlight. A measure that is taken on a school building envelope can prevent overheating and overcooling and reduce the heating and cooling energy consumption but at the same time can increase the lighting energy consumption vice versa. Thus, it is necessary to optimise the energy required for climatisation of a building with lighting energy demand. The main aim of the paper is to provide analysis for façade and shading systems applied to a school building and study the effectiveness of it on energy consumption and conservation. The case study for this paper is a typical building project designed to be located in Istanbul, Turkey and has a traditional façade system which is clear double layer windows without any shading devices. The analyses of the energy efficiency of these systems will be presented. The different glazing types and shading systems alternatives will show the most efficient one to be used as some optimised alternatives for the systems. Findings indicate that proper glazing and shading systems can reduce the needed energy for heating and lightening and thus total energy consumption of a school building significantly.

Assessment of the Life Cycle Energy Efficiency of a Primary School Building in Turkey

2019 ◽  
Vol 887 ◽  
pp. 335-343
Author(s):  
Nazanin Moazzen ◽  
Mustafa Erkan Karaguler ◽  
Touraj Ashrafian
Keyword(s):  
Energy Efficiency ◽  
Life Cycle ◽  
Energy Consumption ◽  
Energy Demand ◽  
Energy Use ◽  
Human Life ◽  
Energy Performance ◽  
Building Envelope ◽  
Embodied Energy

Energy efficiency has become a crucial part of human life, which has an adverse impact on the social and economic development of any country. In Turkey, it is a critical issue especially in the construction sector due to increase in the dependency on the fuel demands. The energy consumption, which is used during the life cycle of a building, is a huge amount affected by the energy demand for material and building construction, HVAC and lighting systems, maintenance, equipment, and demolition. In general, the Life Cycle Energy (LCE) needs of the building can be summarised as the operational and embodied energy together with the energy use for demolition and recycling processes.Besides, schools alone are responsible for about 15% of the total energy consumption of the commercial building sector. To reduce the energy use and CO2 emission, the operational and embodied energy of the buildings must be minimised. Overall, it seems that choosing proper architectural measures for the envelope and using low emitting material can be a logical step for reducing operational and embodied energy consumptions.This paper is concentrated on the operating and embodied energy consumptions resulting from the application of different architectural measures through the building envelope. It proposes an educational building with low CO2 emission and proper energy performance in Turkey. To illustrate the method of the approach, this contribution illustrates a case study, which was performed on a representative schoold building in Istanbul, Turkey. Energy used for HVAC and lighting in the operating phase and the energy used for the manufacture of the materials are the most significant parts of embodied energy in the LCE analyses. This case study building’s primary energy consumption was calculated with the help of dynamic simulation tools, EnergyPlus and DesignBuilder. Then, different architectural energy efficiency measures were applied to the envelope of the case study building. Then, the influence of proposed actions on LCE consumption and Life Cycle CO2 (LCCO2) emissions were assessed according to the Life Cycle Assessment (LCA) method.

scholarly journals Feasibility Study on Energy Audit and Data Driven Analysis Procedure for Building Energy Efficiency: Bench-Marking in Korean Hospital Buildings

Energies ◽  
2019 ◽  
Vol 12 (15) ◽  
pp. 3006 ◽  
Author(s):  
Hwang ◽  
Cho ◽  
Moon
Keyword(s):  
Energy Efficiency ◽  
Energy Consumption ◽  
Energy Flow ◽  
Energy Demand ◽  
Building Energy ◽  
Energy Performance ◽  
Public Hospitals ◽  
Data Driven ◽  
Building Energy Efficiency ◽  
Energy Audit

Growths in population, increasing demand for health care services and comfort levels, together with patients on the rise in time spent inside hospitals, assure the upward trend that energy demand will continue in the future. Since the hospital buildings operate 24 hours, 365 days a year for the treatment and restoration of patients, they are approximately 2–3 times more energy-intensive than normal buildings. For this reason, energy efficiency in hospitals is one of the prime objectives for energy policy at regional, national and international levels. This study aims to find how meaningful energy performance, reflecting good energy management and energy conservation measures (ECMs), can be operated for hospital buildings, a category encompassing complex buildings with different systems and large gaps between them. Energy audit allows us to obtain knowledge from the healthcare facility, in order to define and tune data driven analysis rules. The use of benchmarking in the energy audit of healthcare facilities enables immediate comparison between hospitals. Data driven energy analysis also allows ascertaining their expected energy consumption and estimating the possible savings margin by using the building energy flow chart. In the 2015–2017 periods, bench-marking of four public hospitals in Seoul were audited for the energy consumption related to weather conditions, total area, bed numbers, employee numbers, and analyzed for building energy flow by zones, energy sources, systems and equipment. This is a practice-based learning in a hospital project. The results reveal that the average annual energy consumption of a hospital under normal conditions, and energy efficiency factors are divided into energy baselines, energy consumption goals for energy saving and energy usage trends for setting ECMs, respectively. The indicator dependent on the area of inpatients (number of beds) proved to be the most suitable as a reference to quantify the energy consumption of a hospital.

scholarly journals Experimental Data and Simulations of Performance and Thermal Comfort in a Typical Mediterranean House

Energies ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3311
Author(s):  
Víctor Pérez-Andreu ◽  
Carolina Aparicio-Fernández ◽  
José-Luis Vivancos ◽  
Javier Cárcel-Carrasco
Keyword(s):  
Energy Efficiency ◽  
Thermal Comfort ◽  
Energy Demand ◽  
Natural Ventilation ◽  
Thermal Characterization ◽  
Energy Performance ◽  
Building Stock ◽  
Energy Demands ◽  
Dwelling House ◽  
Account Standard

The number of buildings renovated following the introduction of European energy-efficiency policy represents a small number of buildings in Spain. So, the main Spanish building stock needs an urgent energy renovation. Using passive strategies is essential, and thermal characterization and predictive tests of the energy-efficiency improvements achieving acceptable levels of comfort for their users are urgently necessary. This study analyzes the energy performance and thermal comfort of the users in a typical Mediterranean dwelling house. A transient simulation has been used to acquire the scope of Spanish standards for its energy rehabilitation, taking into account standard comfort conditions. The work is based on thermal monitoring of the building and a numerical validated model developed in TRNSYS. Energy demands for different models have been calculated considering different passive constructive measures combined with real wind site conditions and the behavior of users related to natural ventilation. This methodology has given us the necessary information to decide the best solution in relation to energy demand and facility of implementation. The thermal comfort for different models is not directly related to energy demand and has allowed checking when and where the measures need to be done.

scholarly journals ASSESSMENT OF ENERGY PERFORMANCE GAP OF AN OFFICE BUILDING

2021 ◽  
Vol 13 (0) ◽  
pp. 1-6
Author(s):  
Rasa Džiugaitė-Tumėnienė ◽  
Domas Madeikis
Keyword(s):  
Energy Efficiency ◽  
Energy Demand ◽  
Internal Heat ◽  
Energy Performance ◽  
Energy Model ◽  
Indoor Climate ◽  
Performance Gap ◽  
Protection Measures ◽  
Climate Parameters

The high share of global energy costs to create an indoor climate has been of increasing interest to the global community for several decades and is increasingly the focus of policy. This paper analyses the energy performance gap between actual energy consumption and energy demand obtained during the dynamic energy simulation and building certification. To identify the energy performance gap, an existing office of energy efficiency class B was selected as a case study. The simulation program IDA Indoor Climate and Energy was used to create a dynamic energy model, based on the designed documentation and the actual indoor climate parameters recorded by the building management system. The results of the case study showed that the accuracy and reliability of the results presented by the dynamic energy model of the building directly depend on the assumptions. The correct values of the internal heat gains, indoor climate parameters, human behavior, air quality levels at different times of the day and season, HVAC system operation parameters and operation modes, specific fan powers of ventilation systems, the seasonal energy efficiency of cooling equipment and characteristics of sun protection measures have to be selected.

Sign in / Sign up

Export Citation Format

Share Document