scholarly journals Evaluation of the prototype of a new bracket-positioning gauge

2018 ◽  
Vol 23 (2) ◽  
pp. 68-74 ◽  
Author(s):  
Sergio Luiz Mota Júnior ◽  
Marcio José da Silva Campos ◽  
Carina Abrantes Schmitberger ◽  
Juliana de Andrade Vitral ◽  
Marcelo Reis Fraga ◽  
...  

ABSTRACT Objective: The purposes of this study were to present a prototype of a bracket-positioning gauge, which makes vertical inclination of the instrument difficult, allowing a reduction of vertical bracket positioning error, and to test its accuracy in bracket positioning by groups of individuals with different clinical experience and in specific groups of teeth. Methods: For the testing of the prototype, four groups of six participants each were used: Group 1 was composed of undergraduate students in the dental school, who had no previous experience in bonding orthodontic attachments; Group 2 was composed of orthodontic graduate students in the dental school; Group 3 consisted of orthodontists with a maximum of 5 years of clinical experience; Group 4 comprised orthodontists with more than 5 years of clinical experience. A typodont was simulated with a Class I crowded malocclusion, which reproduced the same occlusal characteristics for all groups to be bonded. All participants were instructed to bond 0.022×0.028-in Edgewise brackets on the labial surfaces of the upper and lower incisors, canines, and premolars at a height of 4 mm from the incisal edge or the labial cusp tip. Results: Only the mean value of Group 1 showed statistically significant difference in the comparison with the standard measurement. In the groups of teeth, the difference was significant for the premolar and incisor groups. Conclusion: Clinical experience interfered with the accuracy of vertical positioning of orthodontic attachments. As for the groups of teeth, premolars, followed by canines and incisors had the closest mean values to the standard measurement.

2004 ◽  
Vol 35 (2) ◽  
pp. 119-137 ◽  
Author(s):  
S.D. Gurney ◽  
D.S.L. Lawrence

Seasonal variations in the stable isotopic composition of snow and meltwater were investigated in a sub-arctic, mountainous, but non-glacial, catchment at Okstindan in northern Norway based on analyses of δ18O and δD. Samples were collected during four field periods (August 1998; April 1999; June 1999 and August 1999) at three sites lying on an altitudinal transect (740–970 m a.s.l.). Snowpack data display an increase in the mean values of δ18O (increasing from a mean value of −13.51 to −11.49‰ between April and August), as well as a decrease in variability through the melt period. Comparison with a regional meteoric water line indicates that the slope of the δ18O–δD line for the snowpacks decreases over the same period, dropping from 7.49 to approximately 6.2.This change points to the role of evaporation in snowpack ablation and is confirmed by the vertical profile of deuterium excess. Snowpack seepage data, although limited, also suggest reduced values of δD, as might be associated with local evaporation during meltwater generation. In general, meltwaters were depleted in δ18O relative to the source snowpack at the peak of the melt (June), but later in the year (August) the difference between the two was not statistically significant. The diurnal pattern of isotopic composition indicates that the most depleted meltwaters coincide with the peak in temperature and, hence, meltwater production.


Author(s):  
Yuko Komuro ◽  
Yuji Ohta

Conventionally, the strength of toe plantar flexion (STPF) is measured in a seated position, in which not only the target toe joints but also the knee and particularly ankle joints, are usually restrained. We have developed an approach for the measurement of STPF which does not involve restraint and considers the interactions of adjacent joints of the lower extremities. This study aimed to evaluate this new approach and comparing with the seated approach. A thin, light-weight, rigid plate was attached to the sole of the foot in order to immobilize the toe area. Participants were 13 healthy young women (mean age: 24 ± 4 years). For measurement of STPF with the new approach, participants were instructed to stand, raise the device-wearing leg slightly, plantar flex the ankle, and push the sensor sheet with the toes to exert STPF. The sensor sheet of the F-scan II system was inserted between the foot sole and the plate. For measurement with the seated approach, participants were instructed to sit and push the sensor with the toes. They were required to maintain the hip, knee, and ankle joints at 90°. The mean values of maximum STPF of the 13 participants obtained with each approach were compared. There was no significant difference in mean value of maximum STPF when the two approaches were compared (new: 59 ± 23 N, seated: 47 ± 33 N). The coefficient of variation of maximum STPF was smaller for data obtained with the new approach (new: 39%, seated: 70%). Our simple approach enables measurement of STPF without the need for the restraints that are required for the conventional seated approach. These results suggest that the new approach is a valid method for measurement of STPF.


2013 ◽  
Vol 24 (5) ◽  
pp. 482-486 ◽  
Author(s):  
Marili Doro Andrade Deonizio ◽  
Gilson Blitzkow Sydney ◽  
Antonio Batista ◽  
Roberto Pontarolo ◽  
Paulo Ricardo Bittencourt Guimarães ◽  
...  

This study evaluated the influence of apical patency, root filling removal technique and cleaning of the apical foramen, concerning the amount of debris extruded during root canal retreatment. Forty mandibular incisors were randomly assigned to 4 groups - GIM (n=10), GIIM (n=10), GIPT (n=10) and GIIPT (n=10), which were named according to leaving (I) or not (II) apical patency during canal preparation and filling removal technique (manual - M or ProTaper system - PT). After filling material removal, each specimen of each group had the apical foramen cleaned by sizes 15, 20 and 25 instruments, generating 12 subgroups: GIM15, GIM20, GIM25, GIIM15, GIIM20, GIIM25, GIPT15, GIPT20, GIPT25, GIIPT15, GIIPT20 and GIIPT25. Extruded filling debris was collected by a Milipore filtration system, an HV-durapore, 0.45 µm pore filter with a 25 mm diameter. The filters were weighed before and after the collection on an analytical scale (10–5 g), and the difference was calculated. The mean weight of extruded filling debris was analyzed statistically by Kruskal-Wallis and Friedman ANOVA tests (α=0.05). The mean values found in the groups (in mg) were: GIM (0.95±0.94), GIIM (0.47±0.62), GIPT (0.30±0.31) and GIIPT (0.32±0.44). There was no statistically significant difference among any of the groups or subgroups (p>0.05). ProTaper provided the smallest amount of extruded filling material, regardless of presence or absence of apical patency, followed by manual technique, without and with apical patency. Additional amounts of debris were collected during cleaning of the apical foramen, regardless of the instrument, presence/absence of patency or root filling removal technique.


Author(s):  
A H A Baazil ◽  
J G G Dobbe ◽  
E van Spronsen ◽  
F A Ebbens ◽  
F G Dikkers ◽  
...  

Abstract Objective This study aimed to compare the necessary scutum defect for transmeatal visualisation of middle-ear landmarks between an endoscopic and microscopic approach. Method Human cadaveric heads were used. In group 1, middle-ear landmarks were visualised by endoscope (group 1 endoscopic approach) and subsequently by microscope (group 1 microscopic approach following endoscopy). In group 2, landmarks were visualised solely microscopically (group 2 microscopic approach). The amount of resected bone was evaluated via computed tomography scans. Results In the group 1 endoscopic approach, a median of 6.84 mm3 bone was resected. No statistically significant difference (Mann–Whitney U test, p = 0.163, U = 49.000) was found between the group 1 microscopic approach following endoscopy (median 17.84 mm3) and the group 2 microscopic approach (median 20.08 mm3), so these were combined. The difference between the group 1 endoscopic approach and the group 1 microscopic approach following endoscopy plus group 2 microscopic approach (median 18.16 mm3) was statistically significant (Mann–Whitney U test, p < 0.001, U = 18.000). Conclusion This study showed that endoscopic transmeatal visualisation of middle-ear landmarks preserves more of the bony scutum than a microscopic transmeatal approach.


2021 ◽  
Vol 8 (3) ◽  
pp. 147-152
Author(s):  
Mosmi Lomi ◽  
Jonathan Daniel M

Determining gender is one of the most important procedure in forensics. Teeth are made of the most enduring mineralized tissues in the body, as such, they have an extraordinary resistance to putrefaction and the effects of external agents (physical, thermal, mechanical, chemical or biological) which makes them invaluable material for anthropological, genetic, odontologic and forensic examinations.i)To assess the degree of sexual dimorphism in maxillary canine using maxillary canine index, maxillary first molar and central incisor using mesiodistal (MD) and buccolingual/buccopalatal (BL) dimensions of the crown. ii) To determine the accuracy of maxillary canine index, first molar and central incisor dimensions (mesiodistal and buccolingual/buccopalatal) in determining sex.This study consisted of total 30 participants (males=15, females=15) of age group ranging from 20 to 35 yrs. Measurement of dimensions of selected teeth were performed on maxillary cast using digital Vernier caliper, resolution 0.01mm. Data thus obtained were analyzed statistically.The mean values of all the measurements in males were greater than females. There was statistical significant difference in mean value of bucco-lingual width of molar, mesiodistal width of canine (on left side, right side and average) and the inter-canine distance between males and females. The buccolingual width of molar showed the highest % of sexual dimorphism (5.33%) and the mesiodistal width of molar showed the least % of dimorphism (0.7%). Bucco-lingual width of molar posed the highest prediction accuracy for gender determination. We conclude that buccolingual width of maxillary first molar can be used to predict the gender when only teeth of maxillary arch are available for forensic examination.


2021 ◽  
Vol 9 (2) ◽  
pp. 3780-3784
Author(s):  
P.Vani ◽  
◽  
Sharan B Singh M ◽  

Introduction: Cigarette smoking is a prime risk factor for cardiovascular morbidity and mortality. Chronic smoking results in autonomic dysfunction leading to increased cardiovascular risk in smokers. The present study was planned to study the effect of smoking on the Cardiovascular Autonomic Functions among smokers. Materials and Methods: Fifty male subjects who were in the age group of 25 to 45 years. They were grouped into 25 smokers and 25 non-smokers. The participant subjects were selected among the staff members, residents and the patients from the routine OPD in SVIMS. Prior to study, they were informed about the procedure and the purpose of the study tests and written consents were obtained from them. The Cardiovascular Autonomic Function Tests were assessed by using a POLYGRAPH which was available in the department. Results and Conclusion: After applying the ‘t’-test for the difference between the two sample means, it was observed that there was a highly significant difference between the mean values of the BMI(i.e.p<0.01) and the para-sympathetic function tests among the smokers and the non – smokers(i.e.p<0.00). The Resting Heart Rate had significantly increased and the Deep breathing difference, the postural tachycardial index (Response to standing) and the Valsalva Ratio had significantly decreased in the smokers as compared to those in the non – smokers. After applying the ‘t’-test for the difference between the two sample means, it was observed that there was no significant difference between the mean values of the Postural hypotension test (i.e. p>0.05) and that there was a highly significant difference between the mean values of the Sustained handgrip test in the smokers and the non – smokers (i.e. p<0.00). KEY WORDS: Cardiovascular autonomic function tests, Smoking, Resting heart rate.


2018 ◽  
Vol 27 (3) ◽  
pp. 178-84 ◽  
Author(s):  
Githa Rahmayunita ◽  
Tjut N.A. Jacoeb ◽  
Endi Novianto ◽  
Wresti Indriatmi ◽  
Rahadi Rihatmadja ◽  
...  

Background: Curcuma xanthorrhiza Roxb. exerts its anti-inflammatory effects by reducing the concentration of IL-6, IL-8, and phosphorylase kinase, which has role in keratinocyte proliferation. Our study aimed to evaluate the efficacy of C. xanthorrhiza in psoriasis.Methods: From 18 to 59 year-old patients with mild psoriasis, 2 similar lesions were selected. The severity assessment was based on the psoriasis area severity index (PASI), Trozak score, and K6 expression. Using a double-blinded randomized method, lesion was treated with 1% C. xanthorrhiza ointment vs placebo for 4 weeks. The results were analyzed by the chi-square test using STATATM V.12 software (Stata Corp.).Results: The study was conducted in 2010 to 2012 with 17 subjects participated. The median of PASI score were reduced significantly in both lesions, either treated with 1% C. xanthorrhiza ointment vs placebo; however when compared between the group, it was not significant (p=0.520). The Trozak score were reduced in lesions treated with 1% C. xanthorrhiza ointment; but it was not significant (p = 0.306). In lesions treated with placebo, the Trozak score was increased significantly. The difference of Trozak score between lesions treated with C. xanthorrhiza and placebo was significant (p=0.024). There was no significant difference of K6 expression in lesions treated with 1% C. xanthorrhiza ointments or placebo as well as on the difference of mean values of K6 expression between the group (p=0.827).Conclusion: Based on the results, 1% C. xanthorrhiza ointment is effective treatment option for mild psoriasis, but longer follow-up period is suggested to confirm this results. C. xanthorrhiza ointment is safe for topical administration as there were no side effects reported in this study.


2017 ◽  
Vol 11 (1) ◽  
pp. 1041-1048 ◽  
Author(s):  
Mehmet Bekir Unal ◽  
Kemal Gokkus ◽  
Evrim Sirin ◽  
Eren Cansü

Objective: The main objective of this study is to evaluate the availability of lateral antebrachial cutaneous nerve (LACN) autograft for acute or delayed repair of segmented digital nerve injuries. Patients and Methods: 13 digital nerve defects of 11 patients; treated with interposition of LACN graft that harvested from ipsilateral extremity were included in the study. Mean follow up period was 35, 7 months. The mean time from injury to grafting is 53, 3 days. The results of the mean 2PDT and SWMT values of injured /uninjured finger at the end of follow up period were evaluated with Paired T test. The correlation between the defect length and the difference of 2PDT, SWMT values between the uninjured and injured finger at the end of follow up period; were evaluated with Pearson - correlation analysis. Results: The mean value of our 2PDT and SWMT results are ~5,923, ~3, 52, respectively in which can be interpreted between the normal and diminished light touch. The defect length and difference percentage of SWMT values is positively and significantly correlated statistically. Mean length of interposed nerve grafts was 18.5 mm. The age of the patient and the mean values of 2PDT and SWMT with the difference % of 2PDT and % of SWMT are not statistically correlated. Conclusion: Based on results regarding sensory regaining at recipient side and negligible sensory deficit at harvesting side, we suggest that lateral antebrachial cutaneous nerve might be a valuable graft option for digital nerve defects.


2016 ◽  
Vol 10 (02) ◽  
pp. 220-224 ◽  
Author(s):  
Emre Bayram ◽  
Huda Melike Bayram

ABSTRACT Objective: The purpose of this study was to evaluate fracture resistance of teeth with immature apices treated with coronal placement of mineral trioxide aggregate (MTA), bioaggregate (BA), and Biodentine. Materials and Methods: Forty-one freshly extracted, single-rooted human premolar teeth were used for the study. At first, the root length was standardized to 9 mm. The crown-down technique was used for the preparation of the root canals using the rotary ProTaper system (Dentsply Maillefer, Ballaigues, Switzerland) of F3 (30). Peeso reamer no. 6 was stepped out from the apex to simulate an incompletely formed root. The prepared roots were randomly assigned to one control (n = 5) and three experimental (n = 12) groups, as described below. Group 1: White MTA (Angelus, Londrina, Brazil) was prepared as per the manufacturer's instructions and compacted into the root canal using MAP system (Dentsply Maillefer, Ballaigues, Switzerland) and condensed by pluggers (Angelus, Londrina, Brazil). Group 2: The canals were filled with DiaRoot-BA (DiaDent Group International, Canada). Group 3: Biodentine (Septodont, Saint Maur des Fosses, France) solution was mixed with the capsule powder and condensed using pluggers. Instron was used to determine the maximum horizontal load to fracture the tooth, placing the tip 3 mm incisal to the cementoenamel junction. Mean values of the fracture strength were compared by ANOVA followed by a post hoc test. P < 0.05 was considered statistically significant. Results: No significant difference was observed among the MTA, BA, and biodentine experimental groups. Conclusion: All the three materials tested, may be used as effective strengthening agents for immature teeth.


2020 ◽  
Vol 10 (2) ◽  
pp. 82-86
Author(s):  
Mushtaq Hussain Lashari ◽  
Sumbel Sumera ◽  
Umer Farooq ◽  
Zia Ur Rehman ◽  
Nuzhat Sial ◽  
...  

Background: Health problem are culturally associated with smoking in developing countries. Many hazardous chemicals are taken up by direct or passive smoking causing lipid peroxidation resulting in oxidative stress. Objectives: To estimate the occurrence of smoking and its effects on the lipid profile in populations of Hasilpur, Pakistan. Methodology: The current study was conducted from April - August 2014. Out of 247 apparently healthy subjects of both genders (male=220; female=27), 134 were smokers and 113 were non-smokers. In order to analyze lipid profile, blood samples were collected in early morning hours from the selected members who were asked to fast all night. By using Chem-100 chemistry analyzer, cholesterol, triglyceride, HDL, LDL and VLDL were analyzed. Results: The overall prevalence of smokers was 54.25%. The results showed 60.9% prevalence in males and 0% in females. The mean value of serum triglyceride in control, light smokers and heavy smokers was 147.4±11.7mg/dl, 190.8±41.4 and 205.3±29.7mg/dl, respectively. The results of cholesterol in control, light smokers and heavy smokers were 147.38±7.99mg/dl, 136.8 ±12. 8mg/dl and 173.44±8.63mg/dl, respectively. There was a considerable distinction in the mean level of serum triglyceride and cholesterol between the control group, light smokers and heavy smoker groups (P<00.5). The mean value of HDL of control, light smokers and heavy smokers was 30.93±1.30mg/dl, 31.10±2.45 and 34.58±1.55mg/dl, respectively. The mean values of LDL and VLDL of control, light smokers and heavy smokers were 110.46±3.63mg/dl, 106.00±4.52mg/dl, 117.19±3.48mg/dl and 33.54±3.11mg/dl, 49±9.02mg/dl, 41.06±5.34mg/dl, respectively. There was significant difference in the mean level of HDL, LDL and VLDL between the control group, light smokers and heavy smoker groups (P<0.05). Conclusion: This study concluded that smoking is the reasons of variation in the lipid profile. Elevated period of smoking and the number of smoked cigarettes/day reason the alteration in serum lipid levels and is probably related with increased danger for coronary artery disease.


Sign in / Sign up

Export Citation Format

Share Document