scholarly journals Ozone: an emerging technology for the seafood industry

2009 ◽  
Vol 52 (6) ◽  
pp. 1527-1539 ◽  
Author(s):  
Alex Augusto Gonçalves

In recent years, increasing attention has been focused on the safety of foods, and in particular on the intervention methods to reduce and eliminate human pathogens from fresh product, especially fresh seafood. Traditional technology utilizes water with or without a sanitizing agent to wash fresh seafood. Chlorine is the most widely used sanitizing agent available for fresh product, but it has a limited effect in killing bacteria on seafood surfaces. An alternative treatment is being sought to improve food safety. Many research and industrial trials are underway to validate the use of ozone in the food industry. This article intends to show a clean technology to be applied in seafood industry and to show that many studies must be done to demonstrate the best concentrations and the best methods of ozone applications in diverse seafood species, so that the governments of all the countries can approve their application in the fishing industry.

Author(s):  
Kgomotso Lebelo ◽  
Ntsoaki Malebo ◽  
Mokgaotsa Jonas Mochane ◽  
Muthoni Masinde

Historically, chemicals exceeding maximum allowable exposure levels have been disastrous to underdeveloped countries. The global food industry is primarily affected by toxic chemical substances because of natural and anthropogenic factors. Food safety is therefore threatened due to contamination by chemicals throughout the various stages of food production. Persistent Organic Pollutants (POPs) in the form of pesticides and other chemical substances such as Polychlorinated Biphenyls (PCBs) have a widely documented negative impact due to their long-lasting effect on the environment. This present review focuses on the chemical contamination pathways along the various stages of food production until the food reaches the consumer. The contamination of food can stem from various sources such as the agricultural sector and pollution from industrialized regions through the air, water, and soil. Therefore, it is imperative to control the application of chemicals during food packaging, the application of pesticides, and antibiotics in the food industry to prevent undesired residues on foodstuffs. Ultimately, the protection of consumers from food-related chemical toxicity depends on stringent efforts from regulatory authorities both in developed and underdeveloped nations.


Author(s):  
Н.В. АГЕЕВА ◽  
В.К. КОЧЕТОВ ◽  
Е.Ю. ЛИТВИНЕНКО

Рассмотрен опыт внедрения системы менеджмента безопасности пищевой продукции на ОАО Кондитерский комбинат «Кубань». Установлены физические, химические и микробиологические факторы, снижающие безопасность продукции, производимой на ОАО Кондитерский комбинат «Кубань», – мучных кондитерских изделий и продукции цеха шоколадного производства. Перечислены разработанные и внедренные на комбинате пререквизитные программы для предупреждения опасности загрязнения продукции. Установлено, что внедрение превентивных мер позволило: поэтапно сократить количество критических контрольных точек на комбинате с 88 до 4, обеспечить отсутствие рекламации по качеству и безопасности выпускаемой продукции от контролирующих органов, снизить в 2019 г количество претензий от потребителей на 10%. по сравнению с 2018 г. The experience of implementing the food safety management system at OJSC Kuban Confectionery plant is shown. Physical, chemical and microbiological factors that reduce the safety of products produced at the Kuban Confectionery plant-flour confectionery products and products of the chocolate production workshop, have been established. Preliminary programs developed and implemented at the plant to prevent the risk of contamination of products are listed. It was found that the introduction of preventive measures allowed: to gradually reduce the number of critical control points at the plant from 88 to 4, to ensure that there are no complaints about the quality and safety of products from regulatory authorities, to reduce by 10% in 2019 the number of claims from consumers compared to 2018.


2012 ◽  
Vol 2012 ◽  
pp. 1-13 ◽  
Author(s):  
Sanna M. Sillankorva ◽  
Hugo Oliveira ◽  
Joana Azeredo

The interest for natural antimicrobial compounds has increased due to alterations in consumer positions towards the use of chemical preservatives in foodstuff and food processing surfaces. Bacteriophages fit in the class of natural antimicrobial and their effectiveness in controlling bacterial pathogens in agro-food industry has led to the development of different phage products already approved by USFDA and USDA. The majority of these products are to be used in farm animals or animal products such as carcasses, meats and also in agricultural and horticultural products. Treatment with specific phages in the food industry can prevent the decay of products and the spread of bacterial diseases and ultimately promote safe environments in animal and plant food production, processing, and handling. This is an overview of recent work carried out with phages as tools to promote food safety, starting with a general introduction describing the prevalence of foodborne pathogens and bacteriophages and a more detailed discussion on the use of phage therapy to prevent and treat experimentally induced infections of animals against the most common foodborne pathogens, the use of phages as biocontrol agents in foods, and also their use as biosanitizers of food contact surfaces.


Author(s):  
Aljosa Trmcic ◽  
Elizabeth Demmings ◽  
Kalmia Kniel ◽  
Martin Wiedmann ◽  
Samuel David Alcaine

The COVID-19 pandemic has greatly impacted the US food supply and consumer behavior. Food production and processing are being disrupted as illnesses, proactive quarantines, and government-mandated movement restrictions cause labor shortages. In this environment, the food industry has been required to adopt new, additional practices to minimize the risk of COVID-19 cases and outbreaks among its workforce. Successfully overcoming these challenges requires a comprehensive approach that addresses COVID-19 transmission both within and outside the facility; possible interventions include strategies to (i) vaccinate employees, (ii) assure that employees practice social distancing, (iii) assure that employees wear face coverings, (iv) screen employees for COVID-19 (v) assure that employees practice frequent handwashing and avoid touching their faces, (vi) clean frequently touched surfaces, and (vii) assure proper ventilation. Compliance with these control strategies needs to be verified and an overall “COVID-19 control culture” needs to be established to facilitate an effective program. Despite some public misperceptions about SARS-CoV-2 presence on foods or food packaging representing a public health risk, it is important to note that both the virus’ biology and epidemiological data clearly support a negligible risk of COVID-19 transmission through food and food packing. However, COVID-19 pandemic related supply chain and workforce disruptions, as well as the shift in resources to protect food industry employees from COVID-19 may increase the actual food safety risks. The goal of this paper is to review the COVID-19 mitigation practices adopted by the food industry, and the potential impact of these practices and COVID-19 related disruptions on the industry’s food safety mission. A review of these impacts is necessary to ensure that the food industry is prepared to maintain a safe and nutritious food supply in the face of future global disruptions.


2013 ◽  
Vol 103 (4) ◽  
pp. 306-315 ◽  
Author(s):  
Jacqueline Fletcher ◽  
Jan E. Leach ◽  
Kellye Eversole ◽  
Robert Tauxe

Recent efforts to address concerns about microbial contamination of food plants and resulting foodborne illness have prompted new collaboration and interactions between the scientific communities of plant pathology and food safety. This article provides perspectives from scientists of both disciplines and presents selected research results and concepts that highlight existing and possible future synergisms for audiences of both disciplines. Plant pathology is a complex discipline that encompasses studies of the dissemination, colonization, and infection of plants by microbes such as bacteria, viruses, fungi, and oomycetes. Plant pathologists study plant diseases as well as host plant defense responses and disease management strategies with the goal of minimizing disease occurrences and impacts. Repeated outbreaks of human illness attributed to the contamination of fresh produce, nuts and seeds, and other plant-derived foods by human enteric pathogens such as Shiga toxin-producing Escherichia coli and Salmonella spp. have led some plant pathologists to broaden the application of their science in the past two decades, to address problems of human pathogens on plants (HPOPs). Food microbiology, which began with the study of microbes that spoil foods and those that are critical to produce food, now also focuses study on how foods become contaminated with pathogens and how this can be controlled or prevented. Thus, at the same time, public health researchers and food microbiologists have become more concerned about plant–microbe interactions before and after harvest. New collaborations are forming between members of the plant pathology and food safety communities, leading to enhanced research capacity and greater understanding of the issues for which research is needed. The two communities use somewhat different vocabularies and conceptual models. For example, traditional plant pathology concepts such as the disease triangle and the disease cycle can help to define cross-over issues that pertain also to HPOP research, and can suggest logical strategies for minimizing the risk of microbial contamination. Continued interactions and communication among these two disciplinary communities is essential and can be achieved by the creation of an interdisciplinary research coordination network. We hope that this article, an introduction to the multidisciplinary HPOP arena, will be useful to researchers in many related fields.


Foods ◽  
2018 ◽  
Vol 7 (9) ◽  
pp. 141 ◽  
Author(s):  
Geetesh Mishra ◽  
Abbas Barfidokht ◽  
Farshad Tehrani ◽  
Rupesh Mishra

Rapid and precise analytical tools are essential for monitoring food safety and screening of any undesirable contaminants, allergens, or pathogens, which may cause significant health risks upon consumption. Substantial developments in analytical techniques have empowered the analyses and quantitation of these contaminants. However, conventional techniques are limited by delayed analysis times, expensive and laborious sample preparation, and the necessity for highly-trained workers. Therefore, prompt advances in electrochemical biosensors have supported significant gains in quantitative detection and screening of food contaminants and showed incredible potential as a means of defying such limitations. Apart from indicating high specificity towards the target analytes, these biosensors have also addressed the challenge of food industry by providing high analytical accuracy within complex food matrices. Here, we discuss some of the recent advances in this area and analyze the role and contributions made by electrochemical biosensors in the food industry. This article also reviews the key challenges we believe biosensors need to overcome to become the industry standard.


2017 ◽  
Vol 1 (1) ◽  
pp. 13-27 ◽  
Author(s):  
Maria Manuela Camino Feltes ◽  
Adriana Pavesi Arisseto-Bragotto ◽  
Jane Mara Block

Sign in / Sign up

Export Citation Format

Share Document