Integrating arthropod herbivory and reduced herbicide use for weed management

Weed Science ◽  
2004 ◽  
Vol 52 (6) ◽  
pp. 1018-1025 ◽  
Author(s):  
Martin M. Williams ◽  
Douglas B. Walsh ◽  
Rick A. Boydston

Few studies have examined the combined effect of herbicide-induced stress and arthropod herbivory to reduce weed fitness. The purpose of this study was to quantify the effect of arthropod herbivory on the herbicide dose–response of a perennial weed. Fluroxypyr dose–response bioassays using volunteer potato were conducted in the presence and absence of Colorado potato beetle (CPB) herbivory. Logistic model parameter estimates for leaf area, shoot biomass, tuber number, and tuber biomass were often lower with herbivory, compared with no herbivory. Greater variance of parameter estimates within herbivory plots was attributed largely to differential feeding because CPB density was not manipulated in the field. Results from short-season field studies (1,000 growing degree days [GDD] after postemergence [POST] herbicide application) indicated that herbivory had the most effect on potato during a period that coincided with high CPB density and optimal temperatures for CPB development. Season-long bioassays (> 3,100 GDD after POST) revealed that addition of herbivory reduced herbicide use 65 to > 85%, compared with the dose needed to achieve the same reduction in tuber production in the absence of herbivory. Integrated weed management systems targeting volunteer potato are more effective when fluroxypyr applications are made before periods of high herbivory. Moreover, this article describes an experimental approach contributing to optimization of combined effects of arthropod herbivory and reduced herbicide doses.

2005 ◽  
Vol 19 (2) ◽  
pp. 443-450 ◽  
Author(s):  
Rick A. Boydston ◽  
Martin M. Williams

Volunteer potato is becoming increasingly detrimental in potato production regions. We assessed methods to manage the weed in field corn with herbicides and arthropod herbivory. In greenhouse trials, new tuber production was reduced at least 95% in ‘Ranger Russet’, ‘Russet Burbank’, ‘Russet Norkotah’, and ‘Shepody’ potato varieties by mesotrione applied at 0.11 kg/ha. In field studies conducted near Paterson, WA, a single application of mesotrione at 0.07 or 0.11 kg/ha applied at the time of tuber initiation (mid-postemergence [MPOST]) controlled potato top growth 96 to 98% in 2002 and 2003. Mesotrione applied at earlier stages of potato growth, preemergence or early postemergence, controlled potatoes less than mesotrione applied MPOST. All herbicide treatments prevented yield loss in field corn compared with nontreated checks. Mesotrione reduced new potato tubers and tuber weight more than any other herbicide. Herbivory of volunteer potato by Colorado potato beetle reduced tuber number 21% and tuber density 23% in the absence of herbicides and appeared to further suppress the weed in combination with herbicides. Whereas treatments containing mesotrione were most effective against volunteer potato, arthropod herbivory supplemented weed suppression and may be an important component in reduced or low-input weed management systems.


2021 ◽  
pp. 1-22
Author(s):  
Marcelo L. Moretti

Abstract Italian ryegrass has become a problematic weed in hazelnut orchards of Oregon because of the presence of herbicide-resistant populations. Resistant and multiple-resistant Italian ryegrass populations are now the predominant biotypes in Oregon; there is no information on which herbicides effectively control Italian ryegrass in hazelnut orchards. Six field studies were conducted in commercial orchards to evaluate Italian ryegrass control with POST herbicides. Treatments included flazasulfuron, glufosinate, glyphosate, paraquat, rimsulfuron, and sethoxydim applied alone or in selected mixtures during early spring when plants were in the vegetative stage. Treatment efficacy was dependent on the experimental site. The observed range of weed control 28 d after treatment was 13 to 76 % for glyphosate, 1 to 72% for paraquat, 58 to 88% for glufosinate, 16 to 97 % for flazasulfuron, 8 to 94% for rimsulfuron, and 25 to 91% for sethoxydim. Herbicides in mixtures improved control of Italian ryegrass compared to single active ingredients based on contrast analysis. Herbicides in mixture increased control by 27% compared to glyphosate, 18% to rimsulfuron, 15% to flazasulfuron, 19% to sethoxydim, and 12% compared to glufosinate when averaged across all sites, but mixture not always improved ground coverage of biomass reduction. This complex site-specific response highlights the importance of record-keeping for efficient herbicide use. Glufosinate is an effective option to manage Italian ryegrass. However, the glufosinate-resistant biotypes documented in Oregon may jeopardize this practice. Non-chemical weed control options are needed for sustainable weed management in hazelnuts.


Weed Science ◽  
2019 ◽  
pp. 1-21 ◽  
Author(s):  
Sudheesh Manalil ◽  
Hafiz Haider Ali ◽  
Bhagirath Singh Chauhan

Abstract Annual sowthistle (Sonchus oleraceus L.) is a broadleaf weed that is increasing in prevalence in the northern cropping regions of Australia. Being a member of Asteraceae family, this weed possesses many biological attributes needed to thrive in varying environments and weed management pressure. Interference of this weed was examined in a wheat (Triticum aestivum L.) crop through field studies in 2016 and 2017. Different densities of S. oleraceus were evaluated for their potential to cause yield loss in wheat: 0.0 (weed free), low (9 to 15 plants m−2), medium (29 to 38 plants m−2), and high (62 to 63 plants m−2). Based on the exponential decay model, 43 and 52 plants m−2 caused a yield reduction of 50% in 2016 and 2017, respectively. Yield components such as panicles m−2 and grains per panicles were affected by weed density. At the high weed infestation level, S. oleraceus produced a maximum of 182,940 and 192,657 seeds m−2 in 2016 and 2017, respectively. Sonchus oleraceus exhibited poor seed retention at harvest as more than 95% of seeds were blown away by wind. Adverse effects on crop, high seed production and wind-blown dispersal may lead to an increased prevalence of this weed in the absence of an integrated weed management strategy utilizing both herbicides and non-chemical options.


Weed Science ◽  
2006 ◽  
Vol 54 (1) ◽  
pp. 94-99 ◽  
Author(s):  
Martin M. Williams ◽  
Rick A. Boydston

Weed management systems in carrot are limited in part by a lack of fundamental understanding of crop–weed interactions. Irrigated field studies were conducted to quantify the effect of volunteer potato density and duration of interference on carrot yield and to determine relationships among weed density, duration of weed growth, and volunteer potato tuber production. A season-long volunteer potato density of 0.06 plants m−2produced from 150 to 230 g tubers m−2and resulted in an estimated 5% crop yield loss. At two volunteer potato plants m−2, the same level of crop loss was estimated with a duration of interference of 430 growing degree days (GDD), a time at which the weed had already produced 130 g tubers m−2. Volunteer potato height at the time of weed removal predicted carrot yield loss (R2= 0.77) and may be useful for timing of management strategies such as hand weeding. Functional relationships describing carrot–volunteer potato interactions provide simple information that is useful for developing weed management recommendations for carrot, a crop that relies on multiple tactics for managing weeds, and rotational crops that are negatively affected by persistence of volunteer potato.


Weed Science ◽  
1995 ◽  
Vol 43 (2) ◽  
pp. 269-275 ◽  
Author(s):  
John L. Lindquist ◽  
Bruce D. Maxwell ◽  
Douglas D. Buhler ◽  
Jeffrey L. Gunsolus

A simulation model was developed to predict the population dynamics and economics of velvetleaf control in a corn-soybean rotation. Data compiled from the literature were used to parameterize the model for two situations, one in which velvetleaf was infected by aVerticilliumspp. wilt and one without infection.Verticilliumwas assumed to have no effect on corn or soybean yield. In the absence of control, simulated seedbank densities of aVerticillium-infected velvetleaf population were 5 to 50 times lower than for an uninfected velvetleaf population. The model was used to evaluate a threshold weed management strategy under the assumption that velvetleaf was the only weed and bentazon the only herbicide available for its control. In the absence ofVerticillium, an economic optimum threshold of 2.5 seedlings 100 m−2afforded the highest economic returns after 20 yr of simulation. Simulations in which velvetleaf was infected in 8 out of 20 randomly assigned years indicated a 6% increase in annualized net return and an 11 % reduction in the number of years that control was necessary. Sensitivity analysis indicated the parameter estimates having the greatest impact on economic optimum threshold were seedling emergence and survival, maximum seed production, and herbicide efficacy. Under an economic optimum threshold of 2.5 seedlings 100 m−2, management practices that manipulate the most sensitive demographic processes increased annualized net return by up to 13% and reduced long-term herbicide use by up to 26%. Results demonstrate that combining an economic optimum threshold with alternative weed management strategies may increase economic return and reduce herbicide use.


2011 ◽  
Vol 4 (3) ◽  
pp. 326-331 ◽  
Author(s):  
Timothy W. Miller ◽  
Danielle E. D'Auria

AbstractWild chervil is an invasive biennial or short-lived perennial weed introduced into North America that negatively impacts forage production and degrades habitat for native plant species. A 2-yr study using prebloom mowing followed by combinations of herbicide, tillage, and grass seeding was conducted in the Pacific Northwest to identify an effective integrated weed management strategy for this species. By 2 mo after herbicide treatment (MAHT), wild chervil control with glyphosate + ammonium sulfate (AMS) and clopyralid was 83 and 73%, respectively. Tillage with or without herbicide pretreatment resulted in 92 to 98% wild chervil control at 2 MAHT, whereas herbicide without tillage gave only 45% control across all treatments. Tillage with or without subsequent grass seeding reduced wild chervil density four-fold compared to herbicide alone at 9 MAHT. Herbicide + tillage + grass seeding resulted in similar wild chervil cover (1 to 5% cover) as herbicide + tillage (1 to 6% cover) without subsequent grass seeding. Wild chervil biomass at 1 yr after herbicide treatment (YAHT) was reduced to 487 kg ha−1 (439 lb ac−1) with herbicide + tillage compared to 4,256 kg ha−1 for herbicide treatment alone. Herbicide + tillage + grass seeding increased grass dry weight at 1 YAHT from 201 kg ha−1 for herbicide + tillage to 1,575 kg ha−1, compared to 351 kg ha−1 in herbicide-only plots.


2004 ◽  
Vol 18 (3) ◽  
pp. 648-657 ◽  
Author(s):  
Hilary A. Sandler ◽  
Joanne Mason ◽  
Wesley R. Autio ◽  
Thomas A. Bewick

To address grower concerns that repeated use of dichlobenil could negatively affect cranberry productivity, field studies were conducted at two commercial farms in either high weed density (HW) or low weed density (LW) areas. Data from 4 yr of repeat annual applications of 0, 1.8, and 4.5 kg ai/ha dichlobenil indicated minimal negative impact on cranberry vines. Herbicide application did not affect upright productivity, leaf biomass production, percent fruit set, or other yield parameters adversely; in addition, no improvement in these parameters was noted. Although the interaction of herbicide application with weed density on cranberry root length varied with sampling date, no consistent trend (adverse or positive) was seen. The presence of weeds, rather than herbicide application, was the important determinant of yield. Vines in LW areas produced more marketable fruit and had higher percentage of fruit set than vines growing in HW areas. Repeat annual applications of dichlobenil on commercial cranberry beds may be considered as part of a viable integrated weed management program with no adverse effect on crop growth or yield.


2013 ◽  
Vol 27 (2) ◽  
pp. 352-361
Author(s):  
Mohammad Ghorbani ◽  
Surendra Kulshreshtha

Inputs, including herbicides, used in crop production may create negative environmental impacts. One solution to minimize these adverse effects is the adoption of integrated weed management (IWM) with the intention of reducing herbicide use. This study, conducted in 2010, estimates the willingness of farmers to pay for the adoption of more effective weed management methods. Results suggest that the willingness to pay (WTP) for IWM is greater than the WTP for other weed management methods, including chemical weed management and chemical and mechanical weed management. This study also identified a number of factors that influence the adoption of IWM on wheat farms in Iran using a multinomial logit model. Total annual income, area under irrigated wheat, wheat yield loss due to weeds, perennial nature of the weeds, and having awareness of weed resistance to herbicides had a positive effect on the adoption of IWM practices. However, having rain-fed (dryland) wheat cultivation and a larger number of plots on the farm had a negative influence on the choice of IWM.


2018 ◽  
Vol 10 (4) ◽  
pp. 79 ◽  
Author(s):  
Abbes Tanji ◽  
Mohamed Boutfirass

Three on-farm weed control experiments were conducted in irrigated bread wheat in the Doukkala perimeter, Morocco, in 2015-16 and 2016-17 in order to study the efficacy of 4 pre-emergence herbicide treatments for controlling rigid ryegrass that is resistant to 13 post-emergence herbicides. Results showed that 3 pre-emergence herbicides [i) chlorotoluron, 2000 g/ha + isoxaben, 74.8 g/ha; ii) prosulfocarb, 4000 g/ha; iii) prosulfocarb, 2000 g/ha + s-metolachlor, 300 g/ha] reduced rigid ryegrass shoot biomass by > 90% 1 to 3 months after treatments (MAT). Pendimethalin (1320 g ha-1) achieved 83-99% rigid ryegrass control 1 to 3 MAT. The four herbicide treatments were safe on wheat in one experiment, but reduced wheat density in 2 other experiments due to heavy rain (about 100 mm) after herbicide treatments and before crop emergence. Grain yields in sprayed plots ranged from 6.6 to 9.8 t ha-1, 4.4 to 7.4 t ha-1, 7.3 to 8.9 t ha-1 in experiments 1 to 3, respectively. Straw yields were 11.4 to 15.4, 9.6 to 15.8, and 10.1 to 14.5 t ha-1 in the 3 experiments, respectively. These preemergence herbicides need to be used by wheat growers as part of an integrated weed management program. Further research is needed to explore ways to avoid wheat injury, that could be occasionally caused by heavy rain or irrigation, after preemergence herbicide application and before crop emergence.


Weed Science ◽  
2017 ◽  
Vol 65 (4) ◽  
pp. 525-533 ◽  
Author(s):  
Collen Redlick ◽  
Hema S. N. Duddu ◽  
Lena D. Syrovy ◽  
Christian J. Willenborg ◽  
Eric N. Johnson ◽  
...  

Concern over the development of herbicide-resistant weeds has led to interest in integrated weed management systems that reduce selection pressure by utilizing mechanical and cultural weed control practices in addition to herbicides. Increasing crop seeding rate increases crop competitive ability and thus can enhance herbicide efficacy. However, it is unknown how increasing the seeding rate affects an herbicide’s efficacy. The objective of this study was to examine the interaction between increasing seeding rate and herbicide dose to control weeds. To meet this objective, the herbicide fluthiacet-methyl was applied to field-grown lentil, with Indian mustard, a proxy for wild mustard, used as a model weed. The experiment was a factorial design with four lentil seeding rates and seven herbicide rates. Overall the herbicide dose response was altered by changing lentil seeding rate. Increasing lentil seeding rate decreased the weed biomass production when herbicides were not applied. In two of the four site-years, increasing lentil seeding rate lowered the herbicide ED50, the dose required to result in a 50% reduction in weed biomass. Increasing the crop seeding rate altered the dose response to provide greater weed control at lower herbicide rates compared with normal crop seeding rates. Increased seeding rates also resulted in higher and more stable crop seed yields across a wider range of herbicide dosages. These results suggest that dose–response models can be used to evaluate the efficacy of other weed management practices that can interact with herbicide performance.


Sign in / Sign up

Export Citation Format

Share Document