METHANE INJECTION THROUGH BORED GRAPHITE ELECTRODES INTO THERMAL ARCS OF EAFS FOR HIGHER POWER AND CLEANER STEELS

2011 ◽  
Vol 15 (3) ◽  
pp. 193-204
Author(s):  
Dieter Neuschutz ◽  
D. Spirin
Keyword(s):  
Graphite Electrodes ◽  
Higher Power

Effect of Electrode Shape on Power and Internal Resistance in Benthic Microbial Fuel Cell Material on Marine Sediment

2009 ◽  
Vol 79-82 ◽  
pp. 2195-2198 ◽  
Author(s):  
Jian Hai Li ◽  
Yu Bin Fu ◽  
Jia Liu ◽  
An Long Li ◽  
Dong Dong Ma
Keyword(s):  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Power Density ◽  
Internal Resistance ◽  
Internal Diameter ◽  
Test Results ◽  
Electrode Structure ◽  
Graphite Electrodes ◽  
Electrode Shape ◽  
Higher Power

As the electrode structure has a great effect on the performance of the benthic microbial fuel cell (BMFC), several graphite electrodes with different shapes (column, plane disk and tubular shape for example) are designed in this paper. The maximum power density (Pm) of BMFC-c and BMFC-d are 20.2 mW•m-2 and 14.9 mW•m-2 respectively, and the internal resistances are 333 Ω and 598 Ω respectively. Three cells are composed of three different sizes of graphite tubes, and their internal diameter of these electrodes are 2.5 cm (called it as BMFC-I for short); 1.0 cm (BMFC-II) and 0 cm (column shape for comparison, BMFC-III) respectively. Test results show that the Pm of BMFC-I, BMFC-II and BMFC-III are 13, 11 and 16 mW•m-2 respectively, and their internal resistances are 435 Ω, 488 Ω and 419 Ω respectively. Results show that the column structure electrode has a lower internal resistance and a higher power density than the disk and tubular structure electrode.

Physical Fitness and Resting EEG in Children With Attention Deficit Hyperactivity Disorder

2015 ◽  
Vol 29 (1) ◽  
pp. 26-32 ◽  
Author(s):  
Ching-Wen Huang ◽  
Chung-Ju Huang ◽  
Chiao-Ling Hung ◽  
Chia-Hao Shih ◽  
Tsung-Min Hung
Keyword(s):  
Attention Deficit Hyperactivity Disorder ◽  
Physical Fitness ◽  
Attention Deficit ◽  
Resting State ◽  
Self Control ◽  
Children With Adhd ◽  
Hyperactivity Disorder ◽  
Higher Power ◽  
Eyes Open ◽  
The Relationship

Children with attention deficit hyperactivity disorder (ADHD) are characterized by a deviant pattern of brain oscillations during resting state, particularly elevated theta power and increased theta/alpha and theta/beta ratios that are related to cognitive functioning. Physical fitness has been found beneficial to cognitive performance in a wide age population. The purpose of the present study was to investigate the relationship between physical fitness and resting-state electroencephalographic (EEG) oscillations in children with ADHD. EEG was recorded during eyes-open resting for 28 children (23 boys and 5 girls, 8.66 ± 1.10 years) with ADHD, and a battery of physical fitness assessments including flexibility, muscular endurance, power, and agility tests were administered. The results indicated that ADHD children with higher power fitness exhibited a smaller theta/alpha ratio than those with lower power fitness. These findings suggest that power fitness may be associated with improved attentional self-control in children with ADHD.

Electricity Production from Dual Chambers Microbial Fuel Cell Fed with Chicken Manure-Wastewater

2015 ◽  
Vol 3 (1) ◽  
pp. 9-18
Author(s):  
Ali J. Jaeel
Keyword(s):  
Fuel Cell ◽  
Microbial Fuel Cell ◽  
Chicken Manure ◽  
Electricity Production ◽  
Anaerobic Sludge ◽  
Livestock Wastewater ◽  
Graphite Electrodes ◽  
Reliable Source ◽  
Current Densities ◽  
Resistance Value

Chicken manure wastewaters are increasingly being considered a valuable resource of organic compounds. Screened chicken manure was evaluated as a representative solid organic waste. In this study, electricity generation from livestock wastewater (chicken manure) was investigated in a continuous mediator-less horizontal flow microbial fuel cell with graphite electrodes and a selective type of membrane separating the anodic and cathodic compartments of MFC from each other. The performance of MFC was evaluated to livestock wastewater using aged anaerobic sludge. Results revealed that COD and BOD removal efficiencies were up to 88% and 82%, respectively. At an external resistance value of 150 Ω, a maximum power and current densities of 278 m.W/m2 and 683 mA/m2, respectively were obtained, hence MFC utilizing livestock wastewater would be a sustainable and reliable source of bio-energy generation .

Some consequences of body size

1984 ◽  
Vol 247 (4) ◽  
pp. H495-H507 ◽  
Author(s):  
L. E. Ford
Keyword(s):  
Heart Rate ◽  
Body Weight ◽  
Metabolic Rate ◽  
Muscle Power ◽  
Weight Ratio ◽  
Single Species ◽  
Hill Climbing ◽  
Proper Size ◽  
Higher Power ◽  
Metabolic Indices

The question of the proper size denominator for metabolic indices is addressed. Metabolic rate among different species is proportional to the 3/4 power of body weight, not surface area. Muscle power also varies with the 3/4 power of weight, suggesting that metabolic rate is determined mainly by muscle power. Power-to-weight ratio, specific metabolic rate, and a number of metabolic periods, including heart rate, all vary inversely with the 1/4 power of body weight. Thus the relative times required for physiological and pathological processes in different species may be estimated from the average resting heart rate for the species. There are not many small humans among athletic record holders in events involving acceleration and hill climbing, as would be expected if they had higher power-to-weight ratios. Thus the relationship between size and metabolic rate in different species should not be applied within the single species of humans. Evidence is reviewed showing that basal metabolic rate in humans is determined mainly by lean body mass.

scholarly journals Numerical and Theoretical Study of Performance and Mechanical Behavior of PEM-FC Using Innovative Channel Geometrical Configurations

2021 ◽  
Vol 11 (12) ◽  
pp. 5597
Author(s):  
Hussein A. Z. AL-bonsrulah ◽  
Mohammed J. Alshukri ◽  
Ammar I. Alsabery ◽  
Ishak Hashim
Keyword(s):  
Fuel Cell ◽  
Cross Section ◽  
Rectangular Channel ◽  
Compressive Load ◽  
Proton Exchange ◽  
Channel Cross Section ◽  
Channel Height ◽  
Cross Sectional ◽  
Triangular Channel ◽  
Higher Power

Proton exchange membrane fuel cell (PEM-FC) aggregation pressure causes extensive strains in cell segments. The compression of each segment takes place through the cell modeling method. In addition, a very heterogeneous compressive load is produced because of the recurrent channel rib design of the dipole plates, so that while high strains are provided below the rib, the domain continues in its initial uncompressed case under the ducts approximate to it. This leads to significant spatial variations in thermal and electrical connections and contact resistances (both in rib–GDL and membrane–GDL interfaces). Variations in heat, charge, and mass transfer rates within the GDL can affect the performance of the fuel cell (FC) and its lifetime. In this paper, two scenarios are considered to verify the performance and lifetime of the PEM-FC using different innovative channel geometries. The first scenario is conducted by adopting a constant channel height (H = 1 mm) for all the differently shaped channels studied. In contrast, the second scenario is conducted by taking a constant channel cross-sectional area (A = 1 mm2) for all the studied channels. Therefore, a computational fluid dynamics model (CFD) for a PEM fuel cell is formed through the assembly of FC to simulate the pressure variations inside it. The simulation results showed that a triangular cross-section channel provided the uniformity of the pressure distribution, with lower deformations and lower mechanical stresses. The analysis helped gain insights into the physical mechanisms that lead to the FC’s durability and identify important parameters under different conditions. The model shows that it can assume the intracellular pressure configuration toward durability and appearance containing limited experimental data. The results also proved that the better cell voltage occurs in the case of the rectangular channel cross-section, and therefore, higher power from the FC, although its durability is much lower compared to the durability of the triangular channel. The results also showed that the rectangular channel cross-section gave higher cell voltages, and therefore, higher power (0.63 W) from the fuel cell, although its durability is much lower compared to the durability of the triangular channel. Therefore, the triangular channel gives better performance compared to other innovative channels.

scholarly journals scSorter: assigning cells to known cell types according to marker genes

2021 ◽  
Vol 22 (1) ◽  
Author(s):  
Hongyu Guo ◽  
Jun Li
Keyword(s):  
Real Data ◽  
Cell Types ◽  
Exact Expression ◽  
Marker Genes ◽  
Specific Marker ◽  
Sequencing Data ◽  
Reference Dataset ◽  
Over Expression ◽  
Higher Power ◽  
Cell Type Specific

AbstractOn single-cell RNA-sequencing data, we consider the problem of assigning cells to known cell types, assuming that the identities of cell-type-specific marker genes are given but their exact expression levels are unavailable, that is, without using a reference dataset. Based on an observation that the expected over-expression of marker genes is often absent in a nonnegligible proportion of cells, we develop a method called scSorter. scSorter allows marker genes to express at a low level and borrows information from the expression of non-marker genes. On both simulated and real data, scSorter shows much higher power compared to existing methods.

Sign in / Sign up

Export Citation Format

Share Document