scholarly journals Disease suppression in Ganoderma-infected oil palm seedlings treated with Trichoderma harzianum

2008 ◽  
Vol 44 (No. 3) ◽  
pp. 101-107 ◽  
Author(s):  
M.Z. Nur Ain Izzati ◽  
F. Abdullah
Keyword(s):  
Oil Palm ◽  
Large Scale ◽  
Biocontrol Agent ◽  
Severity Index ◽  
Disease Suppression ◽  
Scale Production ◽  
Conidial Suspension ◽  
Disease Severity Index ◽  
Artificial Infection ◽  
Large Scale Production

Disease suppression in <I>Ganoderma</I>-infected oil palm seedlings treated with a conidial suspension of <I>Trichoder-ma harzianum</I> FA 1132 was tested in plant house conditions to determine the effectiveness of the fungus as a biocontrol agent. The highest efficacy of control was achieved by treatment right after artificial infection; the total number of infected plants was reduced to give the lowest disease severity index (DSI) value of 5.0%, compared to the infected and non-treated control that had the highest DSI of 70.0%. After conidia suspension of FA 1132 was applied, the colony forming ability by <I>Trichoderma</I> in the soil was dramatically increased, but decreased after some time. Results of the present study are a useful reference basis for further tests in the field and large scale production trials.

scholarly journals The Effectiveness Colonized System of Ganoderma Vaccine Compared to Trichoderma on Oil Palm Plantations That Infected by Ganoderma boninense

2021 ◽  
Vol 13 (7) ◽  
pp. 89
Author(s):  
Roderick Bastian ◽  
Supeno Surija ◽  
Michelle Faustine
Keyword(s):  
Oil Palm ◽  
Large Scale ◽  
Severity Index ◽  
Scale Production ◽  
Ganoderma Boninense ◽  
Palm Trees ◽  
Large Scale Production ◽  
Area North ◽  
North Sumatra ◽  
Sample Experiment

Basal stem rot caused by Ganoderma boninense causes fall and death of oil palm crops, and will drastically reduce plantation productivity by up to 50% and become one of the most serious problems in oil palm cultivation. This study aims to determine the effectiveness of the Colonized System of Ganoderma Vaccine (CHIPS&reg;), as a biocontrol agent against the suppression of Ganoderma disease that infects oil palm trees in-field conditions. This research was conducted from early 2016 to the end of 2020 in a plantation located in Langkat area, North Sumatra by using 216 trees on 1 block as a sample experiment. Plants that infected with Ganoderma is treated with T1 treatment (MOAF&trade; &amp; CHIPS&reg;) shows the value of Disease Severity Index (DSI) decreasing to 37.50%, compare to T2 treatment (NPK Granular Fertilizer 13-6-27 &amp; Trichoderma bio fungicides) which has DSI value of 100% in week 232 (in 2020) and C1 treatment (control) with the highest DSI value of 100% in week 212 (in 2020). The conclusions of this study shows that the treatment of T1 (MOAF&trade; &amp; CHIPS&reg;) is more successful in eradicating Ganoderma and have the highest profit ratio than any other treatments. The results of this study are useful as references for in-field inspection and large-scale production.

scholarly journals Sustainability

2021 ◽  
Author(s):  
Dickson Osei Darkwah ◽  
Meilina Ong-Abdullah
Keyword(s):  
Oil Palm ◽  
Precision Agriculture ◽  
Large Scale ◽  
Biodiversity Loss ◽  
Scale Production ◽  
Oil Crops ◽  
Sustainability Strategies ◽  
Large Scale Production ◽  
Agriculture Sustainability ◽  
Negative Impacts

The oil palm (Elaies guineensis Jacq) is the largest produced and highly traded vegetable oil globally yet has the lowest cost of production and significantly higher productivity compared to other oil crops. The crop has the potential of alleviating poverty for smallholders and lifting the economies of countries with large scale production notably, Malaysia and Indonesia and currently on high demand for use as biofuel feedstock. Irrespective of these advantages of the oil palm, there is a global concern on the devastating impact of the crop on the environment and ecosystem during plantation developments and expansions. Deforestation, biodiversity loss, water and air pollution and toxic compounds from palm oil mill effluents (POME) are some of the negative impacts of the oil palm. For the industry to be more beneficial and impactful globally, sustainability strategies becomes urgent need. Sustainability strategies such as increasing the yield of oil palm, precision agriculture, sustainability certification, support for smallholders and circular economy have been put across to curtail the negative impacts of oil palm expansion.

Large scale production of succinic acid by fermentation of sequential inorganic salt pretreated oil palm empty fruit bunch

2021 ◽  
Vol 155 ◽  
pp. 106307
Author(s):  
Nur Amirah Khairina Khairil Anwar ◽  
Nursia Hassan ◽  
Ani Idris ◽  
Solleh Ramli ◽  
Roslinda Abd Malek
Keyword(s):  
Succinic Acid ◽  
Oil Palm ◽  
Large Scale ◽  
Inorganic Salt ◽  
Scale Production ◽  
Empty Fruit Bunch ◽  
Large Scale Production

scholarly journals Induction and characterization of oil palm (Elaeis guineensis Jacq.) pro-embryogenic masses

2013 ◽  
Vol 85 (4) ◽  
pp. 1545-1556 ◽  
Author(s):  
MARLUCIA S. PADUA ◽  
LUCIANO V. PAIVA ◽  
CLAUDIA R.G. LABORY ◽  
EDUARDO ALVES ◽  
VANESSA C. STEIN
Keyword(s):  
Oil Palm ◽  
Large Scale ◽  
Elaeis Guineensis ◽  
Leaf Explants ◽  
Scale Production ◽  
Large Scale Production ◽  
Type 3

ABSTRACT Oil palm is one of the most economically valuable oil seed plants, but the expansion of plantations has been limited by availability of seedlings, as the conventional propagation is through seeds, which have low germination rates. One possible solution for the large-scale production is the use of somatic embryogenesis. The aim of this study was evaluate the effects auxins 2,4-D and picloram on the induction of pro-embryogenic masses in E.guineenesis hybrid leaf explants and characterize, regarding embryogenic characteristics, with cytochemical and ultrastructural analisys. Specifically, in vitro plantlets leaves fragments were inoculated in Y3 culture medium supplemented by 2.4-D or picloram at different concentrations (0.0, 1.0, 3.0, 6.0 and 9.0 mg l–1). After 90 days the presence/ absence of cell masses were evaluated. Both growth regulators efficiently induced cellular masses regardless of the concentrations applied. As the cell masses were not homogeneously formed, they were classified according to color and shape into four types: TYPE 1 - elongated and translucent, TYPE 2 – uneven and translucent, TYPE 3 - globular and beige TYPE 4 – globular and white. Based on the anatomical and ultrastructural features, TYPE 2, 3 and 4 cell masses were considered to have the highest embryogenic potential and therefore may be most suited to large-scale vegetative propagation of oil palm.

I. S. A. Baud. Forms of Production and Women's Labour: Gender Aspects of Industrialisation in India and Mexico. New Delhi: Sage Publications. 1992. 321 pp.Hardbound. Price: Indian Rs 295.00.

1993 ◽  
Vol 32 (1) ◽  
pp. 129-131
Author(s):  
Naureen Talha
Keyword(s):  
Large Scale ◽  
Indian Society ◽  
New Delhi ◽  
Scale Production ◽  
Female Labour ◽  
Self Employment ◽  
Commodity Production ◽  
Large Scale Production ◽  
Mexican Society ◽  
Small Production

The literature on female labour in Third World countries has become quite extensive. India, being comparatively more advanced industrially, and in view of its size and population, presents a pictures of multiplicity of problems which face the female labour market. However, the author has also included Mexico in this analytical study. It is interesting to see the characteristics of developing industrialisation in two different societies: the Indian society, which is conservative, and the Mexican society, which is progressive. In the first chapter of the book, the author explains that he is not concerned with the process of industrialisation and female labour employed at different levels of work, but that he is interested in forms of production and women's employment in large-scale production, petty commodity production, marginal small production, and self-employment in the informal sector. It is only by analysis of these forms that the picture of females having a lower status is understood in its social and political setting.

Large-Scale Production of Pottery at Gordion : Comparison of the Late Bronze and Early Phrygian Industries.

Paléorient ◽  
1996 ◽  
Vol 22 (1) ◽  
pp. 67-87 ◽  
Author(s):  
Robert C. Henrickson ◽  
M. J. Blackman
Keyword(s):  
Large Scale ◽  
Scale Production ◽  
Large Scale Production

An Efficient and Improved Process for the Synthesis of Itopride Hydrochloride and Trimethobenzamide Hydrochloride

2018 ◽  
Vol 15 (4) ◽  
pp. 572-575 ◽  
Author(s):  
Ponnusamy Kannan ◽  
Samuel I.D. Presley ◽  
Pallikondaperumal Shanmugasundaram ◽  
Nagapillai Prakash ◽  
Deivanayagam Easwaramoorthy
Keyword(s):  
Large Scale ◽  
Hydroxylamine Hydrochloride ◽  
Scale Production ◽  
One Pot ◽  
Hydrochloride Salt ◽  
Environmental Friendly ◽  
Large Scale Production ◽  
Non Ulcer Dyspepsia ◽  
Itopride Hydrochloride ◽  
Yield And Purity

Aim and Objective: Itopride is a prokinetic agent used for treating conditions like non-ulcer dyspepsia. Itopride is administered as its hydrochloride salt. Trimethobenzamide is used for treating nausea and vomiting and administered as its hydrochloride salt. The aim is to develop a novel and environmental friendly method for large-scale production of itopride and trimethobenzamide. Materials and Methods: Itopride and trimethobenzamide can be prepared from a common intermediate 4- (dimethylaminoethoxy) benzyl amine. The intermediate is prepared from one pot synthesis using Phyrdroxybenzaldehye and zinc dust and further reaction of the intermediate with substituted methoxy benzoic acid along with boric acid and PEG gives itopride and trimethobenzamide. Results: The intermediate 4-(dimethylaminoethoxy) benzylamine is prepared by treating p-hydroxybenzaldehyde and 2-dimethylaminoethyl chloride. The aldehyde formed is treated with hydroxylamine hydrochloride. The intermediate is confirmed by NMR and the purity is analysed by HPLC. Conclusion: Both itopride and trimethobenzamide were successfully synthesized by this method. The developed method is environmental friendly, economical for large-scale production with good yield and purity.

scholarly journals Cyanobacteria—From the Oceans to the Potential Biotechnological and Biomedical Applications

Marine Drugs ◽  
2021 ◽  
Vol 19 (5) ◽  
pp. 241
Author(s):  
Shaden A. M. Khalifa ◽  
Eslam S. Shedid ◽  
Essa M. Saied ◽  
Amir Reza Jassbi ◽  
Fatemeh H. Jamebozorgi ◽  
...  
Keyword(s):  
Bioactive Compounds ◽  
Biomedical Applications ◽  
Large Scale ◽  
Biological Activities ◽  
Scale Production ◽  
Pharmacological Activities ◽  
Large Scale Production ◽  
Marine Products ◽  
Hiv 1 ◽  
Successful Phase

Cyanobacteria are photosynthetic prokaryotic organisms which represent a significant source of novel, bioactive, secondary metabolites, and they are also considered an abundant source of bioactive compounds/drugs, such as dolastatin, cryptophycin 1, curacin toyocamycin, phytoalexin, cyanovirin-N and phycocyanin. Some of these compounds have displayed promising results in successful Phase I, II, III and IV clinical trials. Additionally, the cyanobacterial compounds applied to medical research have demonstrated an exciting future with great potential to be developed into new medicines. Most of these compounds have exhibited strong pharmacological activities, including neurotoxicity, cytotoxicity and antiviral activity against HCMV, HSV-1, HHV-6 and HIV-1, so these metabolites could be promising candidates for COVID-19 treatment. Therefore, the effective large-scale production of natural marine products through synthesis is important for resolving the existing issues associated with chemical isolation, including small yields, and may be necessary to better investigate their biological activities. Herein, we highlight the total synthesized and stereochemical determinations of the cyanobacterial bioactive compounds. Furthermore, this review primarily focuses on the biotechnological applications of cyanobacteria, including applications as cosmetics, food supplements, and the nanobiotechnological applications of cyanobacterial bioactive compounds in potential medicinal applications for various human diseases are discussed.

scholarly journals A Review on Additive Manufacturing Possibilities for Electrical Machines

Energies ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1940
Author(s):  
Muhammad Usman Naseer ◽  
Ants Kallaste ◽  
Bilal Asad ◽  
Toomas Vaimann ◽  
Anton Rassõlkin
Keyword(s):  
Additive Manufacturing ◽  
Large Scale ◽  
Three Dimensional ◽  
Electrical Machines ◽  
Electromagnetic Properties ◽  
Scale Production ◽  
Performance Parameters ◽  
Large Scale Production ◽  
One Step ◽  
Manufacturing Techniques

This paper presents current research trends and prospects of utilizing additive manufacturing (AM) techniques to manufacture electrical machines. Modern-day machine applications require extraordinary performance parameters such as high power-density, integrated functionalities, improved thermal, mechanical & electromagnetic properties. AM offers a higher degree of design flexibility to achieve these performance parameters, which is impossible to realize through conventional manufacturing techniques. AM has a lot to offer in every aspect of machine fabrication, such that from size/weight reduction to the realization of complex geometric designs. However, some practical limitations of existing AM techniques restrict their utilization in large scale production industry. The introduction of three-dimensional asymmetry in machine design is an aspect that can be exploited most with the prevalent level of research in AM. In order to take one step further towards the enablement of large-scale production of AM-built electrical machines, this paper also discusses some machine types which can best utilize existing developments in the field of AM.

scholarly journals Stabilized Hydroxide-Mediated Nickel-Based Electrocatalysts for High-Current-Density Hydrogen Evolution in Alkaline Media

2021 ◽  
Author(s):  
Yuting Luo ◽  
Zhiyuan Zhang ◽  
Fengning Yang ◽  
Jiong Li ◽  
Zhibo Liu ◽  
...  
Keyword(s):  
Water Splitting ◽  
Large Scale ◽  
Fossil Fuels ◽  
High Current Density ◽  
Critical Energy ◽  
Alkaline Media ◽  
Scale Production ◽  
High Current ◽  
Large Scale Production ◽  
Electrochemical Water Splitting

Large-scale production of green hydrogen by electrochemical water splitting is considered as a promising technology to address critical energy challenges caused by the extensive use of fossil fuels. Although nonprecious...

Sign in / Sign up

Export Citation Format

Share Document