scholarly journals Range Automatic Adjusted Current Transformer Primary Winning

Author(s):  
Amirov Sultan Fayzullayevich Et.al

The article discusses the issue of introducing a correction factor for protection and control devices, as the value of the secondary current in a certain range of the auto-adjustable current transformer does not correspond to the value of the secondary current in another range determined by the difference of magnetic driving forces generated by the components of the primary current. Alternatively, an algorithm has been developed to account for the measurement error in this condition in an automatic system that controls the operating mode of the current transformer. It was also found that the output data should be transmitted taking into account the correction factor in order to ensure the proper operation of the protection and measuring devices when the current transformer is switched to another measuring range in the measuring range.

Author(s):  
Kirsty Duncanson ◽  
Catriona Elder ◽  
Murray Pratt

Film in Australia, as with many other nations, is often seen as an important cultural medium where national stories about belonging and identity can be (re)produced in pleasurable and, at times, complicated ways. One such film is Ray Lawrence’s Lantana. Although striking a chord in Australia as a good film about ‘ basically good people’, people that rang ‘brilliantly’ true (Lantana DVD 2002), this paper argues that, at the same time as it produces a fantasy of a ‘good’ Australia, the film also conducts a regulation of what constitutes Australianness. In many ways the imaginary of Australia offered in this film, to its contemporary, urban, professional and intellectual elite audience, still draws on and (re)produces a vision of an Australian community that uses the same narrative frameworks of protection and control as the cruder discourses of ‘white Australia’ offered to an earlier generation of cinema-goers. This film’s central motif of the lantana bush, the out of control weed, that is known as both foreign and local is here emblematic of tensions about belonging, place and otherness. Yet while, within the film’s knowingly reflexive purview any remaining potential for racism is understood and itself under control – we know how to be good mutliculturalists –it is the trope of sexuality in Lantana that provides the real sense of edginess and anxiety about belonging. It is in this arena that the film sets up an idea of danger and –less self-consciously, and in the end more aggressively – marks out who is and who is not part of the community. In this context the motif of lantana signals an ambivalence about difference and the exotic. Lantana is both desirable because of the difference in its attractive Latin looks and repulsive or feared because of other qualities inherent within its difference: a refusal to behave and a propensity to get out-of control, spread and potentially take over. The film here explores desire for a taste of the other (a gay man, a newly separated woman, a Latin dance teacher). However, these fantasies are in the end emphatically shut down as the film ends by producing a vision of subtly normalised hetero, mono, familial (though not necessarily happy) forms of desiring, loving and reproducing in contemporary Australia.


2021 ◽  
Vol 261 ◽  
pp. 01014
Author(s):  
Yi Su ◽  
Yufeng Lu ◽  
Lei Zhang ◽  
Xiajin Rao

High voltage circuit breakers are important protection and control equipment for the power grid. The defects and faults of the circuit breaker seriously affect the safety and stability of the power system. As the key component of the operating mechanism of the circuit breaker, the opening/closing coils contain a large amount of information about the operating status of the mechanism. In order to investigate the cause of the difference in the current waveforms, this paper analyzes the factors affecting the circuit breaker opening/closing coil current based on the actual high voltage circuit breaker, and distinguishes the characteristics of the current caused by the environmental difference and Structural difference. At the same time, the characteristics of coil current changes under four different types of mechanism defects are analyzed. These results lay the foundation for status evaluation of high voltage circuit breakers based on opening/closing coil current.


2020 ◽  
Vol 22 (1-2) ◽  
pp. 112-118
Author(s):  
Nenad Belčević ◽  
◽  
Zoran Stojanović

The main function of current transformers is to adapt the high values of the primary current to values suitable for the operation of relay protection devices, i.e. measuring devices. Under normal conditions, a current transformer transforms the current in a virtually permanent ratio, and practically without a phase shift, so the secondary current is actually a scaled value of the primary current. However, when a fault occurs in the power system, currents reach high values. As a result, the flux in the core of the current transformer can reach values above the knee of the magnetization characteristic, causing saturation of the current transformer. When saturation occurs, the secondary current is no longer a scaled value of the primary current, but is deformed. Deformation of the secondary current may cause malfunctioning of some relay protection devices. The development of digital relay protection has made it possible to perform software saturation compensation by applying certain algorithms, thus eliminating the negative consequences that saturation of the current transformer causes. In this paper, one of the possible approaches for compensation of saturation is analyzed, which is based on the application of an equivalent scheme and magnetization curve of the current transformer. Two typical approaches have been singled out, which have been analyzed and tested in more detail. Testing was performed in the MATLAB/Simulink.


Author(s):  
F. A. Romaniuk ◽  
V. Yu. Rumiantsev ◽  
Yu. V. Rumiantsev ◽  
V. S. Kachenya

The use of orthogonal components (OS) is the main direction of determining information parameters in microprocessor relay protection and automation of electric power systems. Most of the measuring devices used in modern protection and automation devices can be implemented using known operating systems. Digital non-recursive frequency filters based on discrete Fourier transform are used for OS selection. The main disadvantage of these filters is their low performance that exceeds the period of industrial frequency. For the construction of high-speed measuring devices, this time of establishing the true output signal is often unacceptable. The article proposes to form the equivalent signal OS in microprocessor defenses based on the values of the cosine and sine axes of the main harmonic formed using a discrete Fourier transform, by multiplying them by a correction factor, which is a function of the values of the input signal amplitude and its main harmonic. The proposed algorithm for generating OS input signals in microprocessor defenses is characterized by high performance in transient modes and has wide functionality. A block diagram of an OS equivalent signal generator has been developed, all blocks of which can be implemented according to known schemes on a microelectronic and microprocessor element base. The OS shaper model is implemented in the MatLab-Simulink dynamic modeling environment. The model functioning was checked using two types of test actions, viz. a sinusoidal signal with a frequency of 50 Hz (idealized action) and a signal close to the real secondary current of a short-circuit current transformer. As a result of the performed calculations, a significant (up to two times) in the speed of the proposed method of OS formation in comparison with the formers based on the discrete Fourier transform, frequency properties of both formers being identical.


2013 ◽  
Vol 62 (1) ◽  
pp. 23-31 ◽  
Author(s):  
Maria Mrówczyńska

Abstract The paper attempts to determine an optimum structure of a directional measurement and control network intended for investigating horizontal displacements. For this purpose it uses the notion of entropy as a logarithmical measure of probability of the state of a particular observation system. An optimum number of observations results from the difference of the entropy of the vector of parameters ΔHX̂ (x)corresponding to one extra observation. An increment of entropy interpreted as an increment of the amount of information about the state of the system determines the adoption or rejection of another extra observation to be carried out.


2019 ◽  
Vol 8 (2) ◽  
Author(s):  
Tanti Jumaisyaroh Siregar

The purposes of this research were to know: the difference of improvement in self-regulated learning of students that given problem-based learning with students that given  direct learning. The type of this research is a quasi-experimental research by taking samples from the existing population. The variable of this research consist of independent variable that is problem based learning model while the dependent variable isself regulated learning of student.The population of this research is all students of SMP Swasta Ar-rahman Percut and the sample of this research is grade eight with taken sample two classes (experiment and control)  with total 60 students. The instrument of this research were: scale of self-regulated learning. Data that have been collected then analyzed and performed hypothesis testing by using T-test. Based of the results analysis, it showed that: improvment  of the students’ self-regulated learning that given problem-based learning was higher than the students’ ability that given direct learning His then, suggested that problem-based learning be used as an alternative for mathematic teacher to improved students’ ability in mathematical critical thinking and self-regulated learning.


2018 ◽  
Vol 28 (1) ◽  
pp. 137-141
Author(s):  
Petya Yordanova – Dinova

This paper explores the comparative analysis of the financial controlling, who is a result from the common controlling concept and the financial management. In the specialized literature, financial controlling is seen as an innovative approach to financial management. It is often presented as the most promising instrument of financial diagnostics. Generally speaking, financial controlling is seen as a process of managing the company`s assets which are valued in monetary measures. The difference between the financial management and the financial controlling is that the second covers all functions of management, analysis and control of finances, aiming at maximizing their effective use and increasing the value of the enterprise. Financial controlling is often seen as a function of the common practice of financial management. Its objective is to preserve the financial stability and financial sustainability of enterprises operating in a highly aggressive business environment.


2021 ◽  
Vol 9 (6) ◽  
pp. 1184
Author(s):  
Nomfusi Ntsobi ◽  
Morris Fanadzo ◽  
Marilize Le Roes-Hill ◽  
Felix Nchu

Globally, fungal inocula are being explored as agents for the optimization of composting processes. This research primarily evaluates the effects of inoculating organic vegetable heaps with the entomopathogenic fungus Clonostachys rosea f. catenula (Hypocreales) on the biophysicochemical properties of the end-product of composting. Six heaps of fresh cabbage (Brassica oleracea var. capitata) waste were inoculated with C. rosea f. catenula conidia and another six were not exposed to the fungus. The composted materials from the fungus- and control-treated heaps were subsequently used as a medium to cultivate tomatoes (Solanum lycopersicum). The biophysicochemical characteristics of the composted materials were also assessed after composting. In addition, the protective effect of the fungal inoculum against red spider mite (Tetranychus urticae) infestations in the tomatoes was evaluated through the determination of conidial colonization of the plant tissue and the number of plants infested by the insect. Furthermore, phytotoxicity tests were carried out post experiment. There were few significant variations (p < 0.05) in heap temperature or moisture level between treatments based on the weekly data. We found no significant differences in the levels of compost macronutrient and micronutrient constituents. Remarkably, the composted materials, when incorporated into a growth medium from fungus-treated heaps, induced a 100% endophytic tissue colonization in cultivated tomato plants. While fewer red spider mite infestations were observed in tomato plants grown in composted materials from fungus-treated heaps, the difference was not significant (χ2 = 0.96 and p = 0.32). The fungal treatment yielded composted materials that significantly (p < 0.05) enhanced tomato seed germination, and based on the phytotoxicity test, the composted samples from the heaps exposed to the C. rosea f. catenula inoculum were not toxic to tomato seeds and seedlings. In conclusion, this study showed that C. rosea f. catenula improved the quality of composted materials in terms of fungal endophytism and seed germination.


Sign in / Sign up

Export Citation Format

Share Document