scholarly journals Numerical Simulation of Flow Characteristics and Channel Changes with Discharge in the Sharped Meandering Channel in the Naeseongcheon, Korea

2017 ◽  
Vol 4 (1) ◽  
pp. 24-33
Author(s):  
Chang-Lae Jang
Keyword(s):  
Numerical Simulation ◽  
Flow Characteristics ◽  
Channel Changes ◽  
Meandering Channel

Numerical Simulation Study on the Recovery Process of Autonomous Underwater Vehicle

2021 ◽  
Author(s):  
Weigang Huang ◽  
Donglei Zhang ◽  
Jiawei Yu ◽  
Tao He ◽  
Xianzhou Wang
Keyword(s):  
Numerical Simulation ◽  
Flow Field ◽  
Autonomous Underwater Vehicle ◽  
Flow Characteristics ◽  
Recovery Process ◽  
Underwater Vehicle ◽  
Hydrodynamic Performance ◽  
Time Step ◽  
Convergence Test ◽  
Motion Paths

Abstract AUV (Autonomous Underwater Vehicle) recovery is considerably influenced by the nearby flow field and simulations of AUV in different motion paths in the wake of a submarine with a propeller are presented in this paper. A commercial CFD solver STAR CCM+ has been used to research the motion and flow characteristics of AUV, which using the advanced computational continuum mechanics algorithms. The DARPA (Defense Advanced Research Projects Agency) SUBOFF Submarine (L1 = 4.356m) propelled with INSEAN (Italian Ship Model Basin) E1619 propeller is used in this study, and the self-propulsion characteristics of the propeller at an incoming flow velocity of 2.75m/s are obtained through numerical simulation and results are compared with the available experimental data to prove the accuracy of the chosen investigation methodology. A grid/time-step convergence test is performed for verification study. AUV (L2 = 0.4356m) is a smaller-scale SUBOFF without a sail, which approaches the submarine in different motion paths in the submarine wake at a relative speed combined with the dynamic overlapping grid technology. The hydrodynamic performance of the AUV when approaching the submarine and the velocity distribution of the surrounding flow field are analyzed, which provides a useful reference for underwater recovery of the AUV.

scholarly journals Numerical and Experimental Investigation of External Characteristics and Pressure Fluctuation of a Submersible Tubular Pumping System

Processes ◽  
2019 ◽  
Vol 7 (12) ◽  
pp. 949 ◽  
Author(s):  
Yan Jin ◽  
Xiaoke He ◽  
Ye Zhang ◽  
Shanshan Zhou ◽  
Hongcheng Chen ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Pressure Fluctuation ◽  
High Efficiency ◽  
Pressure Pulsation ◽  
Guide Vane ◽  
Measurement Data ◽  
Flow Characteristics ◽  
Measuring Point ◽  
Pumping System ◽  
Impeller Outlet

This paper presents an investigation of external flow characteristics and pressure fluctuation of a submersible tubular pumping system by using a combination of numerical simulation and experimental methods. The steady numerical simulation is used to predicted the hydraulic performance of the pumping system, and the unsteady calculation is adopted to simulate the pressure fluctuation in different components of a submersible tubular pumping system. A test bench for a model test and pressure pulsation measurement is built to validate the numerical simulation. The results show that the performance curves of the calculation and experiment are in agreement with each other, especially in the high efficiency area, and the deviation is minor under small discharge and large discharge conditions. The pressure pulsation distributions of different flow components, such as the impeller outlet, middle of the guide vane, and guide vane outlet and bulb unit, are basically the same as the measurement data. For the monitoring points on the impeller and the wall of the guide vane especially, the main frequency and its amplitude matching degree are higher, while the pressure pulsation values on the wall of the bulb unit are quite different. The blade passing frequency and its multiples are important parameters for analysis of pressure pulsation; the strongest pressure fluctuation intensity appears in the impeller outlet, which is mainly caused by the rotor–stator interaction. The farther the measuring point from the impeller, the less the pressure pulsation is affected by the blade frequency. The frequency amplitudes decrease from the impeller exit to the bulb unit.

Research on Flow Characteristics of Aerostatic Circular Thrust Bearing with a Cone Cavity

2011 ◽  
Vol 308-310 ◽  
pp. 189-192
Author(s):  
Long Xing Chen ◽  
Wen Qi Ma ◽  
He Chun Yu ◽  
Hai Yan Liu ◽  
Hong Wang Du
Keyword(s):  
Numerical Simulation ◽  
Flow Field ◽  
Thrust Bearing ◽  
Single Point ◽  
Flow Characteristics ◽  
Simulation Method ◽  
Flow Passage ◽  
Testing Method ◽  
Measurement Results ◽  
Simulation And Experiment

The aerostatic circular thrust bearing was taken as a study subject. The numerical simulation method was used to calculate the flow passage. Meanwhile, the single-point testing method was used to test the pressure distribution. The simulation and experiment measurement results were compared and analyzed. The results show that: The single-point testing method is effective to capture the change of flow characteristics. The overall results of simulation and testing coincide with each other well. In the range of cone cavity, the flow pattern for the gas is turbulent flow, and the flow field should be divided into different zones for simulation.

scholarly journals Numerical simulation and experimental analysis of labyrinth valve flow characteristics based on CFX

2020 ◽  
Vol 788 ◽  
pp. 012006
Author(s):  
Tao Wang ◽  
Maosheng Wang ◽  
Youliang Su ◽  
Song Mu ◽  
Kai Jing ◽  
...  
Keyword(s):  
Numerical Simulation ◽  
Experimental Analysis ◽  
Flow Characteristics

Study on Internal Flow and External Performance of a Semi-open Impeller Centrifugal Pump with Different Tip Clearances

2015 ◽  
Vol 32 (1) ◽  
pp. 1-12 ◽  
Author(s):  
Xiao-Qi Jia ◽  
Bao-Ling Cui ◽  
Yu-Liang Zhang ◽  
Zu-Chao Zhu
Keyword(s):  
Numerical Simulation ◽  
Centrifugal Pump ◽  
Flow Characteristics ◽  
Internal Flow ◽  
Tip Clearance ◽  
Evolution Process ◽  
And Performance ◽  
Unsteady Numerical Simulation

AbstractTo study the influence of tip clearance on internal flow characteristics and external performance of a prototype centrifugal pump with a semi-open impeller, the unsteady numerical simulation and performance experiments are carried out in this paper. The evolution process of leakage vortex with time

Numerical simulation of the stalled flow within a vaned centrifugal pump

2004 ◽  
Vol 218 (4) ◽  
pp. 425-435 ◽  
Author(s):  
K M Guleren ◽  
A Pinarbasi
Keyword(s):  
Numerical Simulation ◽  
Centrifugal Pump ◽  
High Speed ◽  
Stokes Equations ◽  
Reverse Flow ◽  
Flow Characteristics ◽  
Navier Stokes ◽  
Leakage Flow ◽  
Navier Stokes Equations ◽  
Low Pass

The main goal of the present work is to analyse the numerical simulation of a centrifugal pump by solving Navier-Stokes equations, coupled with the ‘standard k-∊’ turbulence model. The pump consists of an impeller having five curved blades with nine diffuser vanes. The shaft rotates at 890r/min. Flow characteristics are assumed to be stalled in the appropriate region of flowrate levels of 1.31-2.861/s. Numerical analysis techniques are performed on a commercial FLUENT package program assuming steady, incompressible flow conditions with decreasing flowrate. Under stall conditions the flow in the diffuser passage alternates between outward jetting when the low-pass-filtered pressure is high to a reverse flow when the filtered pressure is low. Being below design conditions, there is a consistent high-speed leakage flow in the gap between the impeller and the diffuser from the exit side of the diffuser to the beginning of the volute. Separation of this leakage flow from the diffuser vane causes the onset of stall. As the flowrate decreases both the magnitude of the leakage within the vaneless part of the pump and reverse flow within a stalled diffuser passage increase. As this occurs, the stall-cell size extends from one to two diffuser passages. Comparisons are made with experimental data and show good agreement.

Sign in / Sign up

Export Citation Format

Share Document