METHODOLOGY AND EVALUATION OF THE DIMENSIONAL PARAMETERS OF LOGS BY ANALYZING THE STM-FILES OF TRACKED HARVESTERS

We find the highest symmetry between the fields intrinsic to free particles (free particles having only mass, charge and spin), and show these fields symmetries and their close relationship to force and entropy. The Boltzmann Constant is equal to the natural entropy, in that it is The Planck Energy over The Planck Temperature. This completes a needed symmetry in The Bekenstein-Hawking Entropy. Upon substitution of Planck Units into The Schwarzschild Radius, we find that the mass and radius of any black hole define both the gravitational constant and the natural force. We find that the Gaussian Surface area about a particle is equal to the surface area of an equally massed black hole if we define the gravitational field of that particle to be the quotient of The Planck Force and the particles mass. By these simple substitutions we find that gravity is quantized in units of surface entropy. We also find Pythagorean Triples are resting within the dimensional parameters of Special Relativity, and show this to be the dimensional aspects of single particles observing one another, coupled with the intrinsic Hubble nature of the universe.

Download Full-text

Synthesis of symmetrical cables for infocommunication systems with improved noise immunity characteristics

Informacionno-technologicheskij vestnik ◽

10.21499/2409-1650-2018-4-99-108 ◽

2018 ◽

pp. 99-108

Author(s):

А. B. Semenov ◽

T. S. Abbasova

Keyword(s):

Noise Immunity ◽

Mass Dimension ◽

Dimensional Parameters ◽

Improved Characteristics

A synthesis of construction of cables of category 6a for infocommunication systems with improved characteristics of noise immunity is carried out. The parameters of transient pickups and total transient pickups for the proposed cable design are calculated, and the cable diameter of the initial and proposed designs is estimated. The estimation of improvement of mass-dimension parameters of a cable of a proposed design is carried out. It is shown that due to chamber (group) unearthed screening, it is possible to significantly reduce the influence characteristics and the mass-dimensional parameters of the cable.

Download Full-text

Flow through axial-flow-turbomachinery blading

10.1093/oso/9780198719878.003.0014 ◽

2018 ◽

Author(s):

Marcel Escudier

Keyword(s):

Flow Velocity ◽

Compressible Flow ◽

Dimensional Analysis ◽

Incompressible Flow ◽

Compressible Fluid ◽

Axial Flow ◽

Linear Cascade ◽

Dimensional Parameters ◽

Flow Through

This chapter is concerned primarily with the flow of a compressible fluid through stationary and moving blading, for the most part using the analysis introduced in Chapter 11. The principles of dimensional analysis are applied to determine the appropriate non-dimensional parameters to characterise the performance of a turbomachine. The analysis of incompressible flow through a linear cascade of aerofoil-like blades is followed by the analysis of compressible flow. Velocity triangles for flow relative to blades, and Euler’s turbomachinery equation, are introduced to analyse flow through a rotor. The concepts introduced are applied to the analysis of an axial-turbomachine stage comprising a stator and a rotor, which applies to either a compressor or a turbine.

Download Full-text

Magnetotelluric study in the Los Lagos Region (Chile) to investigate volcano-tectonic processes in the Southern Andes

Earth Planets and Space ◽

10.1186/s40623-020-01332-w ◽

2021 ◽

Vol 73 (1) ◽

Author(s):

Maria Jose Segovia ◽

Daniel Diaz ◽

Katarzyna Slezak ◽

Felipe Zuñiga

Keyword(s):

Electrical Resistivity ◽

Three Dimensional ◽

Phase Changes ◽

Fault System ◽

Electrical Anisotropy ◽

Mountain Range ◽

Southern Andes ◽

Nazca Plate ◽

First Results ◽

Dimensional Parameters

AbstractTo analyze the process of subduction of the Nazca and South American plates in the area of the Southern Andes, and its relationship with the tectonic and volcanic regime of the place, magnetotelluric measurements were made through a transversal profile of the Chilean continental margin. The data-processing stage included the analysis of dimensional parameters, which as first results showed a three-dimensional environment for periods less than 1 s and two-dimensional for periods greater than 10 s. In addition, through the geomagnetic transfer function (tipper), the presence of structural electrical anisotropy was identified in the data. After the dimensional analysis, a deep electrical resistivity image was obtained by inverting a 2D and a 3D model. Surface conductive anomalies were obtained beneath the central depression related to the early dehydration of the slab and the serpentinization process of the mantle that coincides in location with a discontinuity in the electrical resistivity of a regional body that we identified as the Nazca plate. A shallow conductive body was located around the Calbuco volcano and was correlated with a magmatic chamber or reservoir which in turn appears to be connected to the Liquiñe Ofqui fault system and the Andean Transverse Fault system. In addition to the serpentinization process, when the oceanic crust reaches a depth of 80–100 km, the ascending fluids produced by the dehydration and phase changes of the minerals present in the oceanic plate produce basaltic melts in the wedge of the subcontinental mantle that give rise to an eclogitization process and this explains a large conductivity anomaly present beneath the main mountain range.

Download Full-text

Electromagnetic-Thermal Integration Design of Permanent Magnet Motor for Vehicles

International Journal of Rotating Machinery ◽

10.1155/2019/9653231 ◽

2019 ◽

Vol 2019 ◽

pp. 1-8 ◽

Cited By ~ 1

Author(s):

Shijun Chen ◽

Qi Zhang ◽

Surong Huang

Keyword(s):

Permanent Magnet ◽

High Performance ◽

Design Method ◽

Electromagnetic Properties ◽

Permanent Magnet Motor ◽

Element Analysis ◽

Experiment Platform ◽

Motor Design ◽

Dimensional Parameters ◽

Thermal Integration

To more efficiently design high performance vehicular permanent magnet motor, an electromagnetic-thermal integration design method is presented, which considers both the electromagnetic properties and the temperature rise of motor winding when determining the main dimensional parameters of the motor. Then a 48-slot and 8-pole vehicular permanent magnet motor is designed with this method. The thermomagnetic coupling design is simulated and validated on the basis of multiphysical domain on finite element analysis. Then the prototype is analyzed and tested on a newly built motor experiment platform. It is shown that the simulation results and experimental results are consistent, which validate the accuracy and effectiveness of the new design method. Also this method is proved to well improve the efficiency of permanent magnet motor design.

Download Full-text

Hybrid Optimization Based Mathematical Procedure for Dimensional Synthesis of Slider-Crank Linkage

Mathematics ◽

10.3390/math9131581 ◽

2021 ◽

Vol 9 (13) ◽

pp. 1581

Author(s):

Alfonso Hernández ◽

Aitor Muñoyerro ◽

Mónica Urízar ◽

Enrique Amezua

Keyword(s):

Genetic Algorithm ◽

Fitness Function ◽

Linear Equations ◽

Optimization Procedure ◽

Optimization Techniques ◽

Dimensional Synthesis ◽

Hybrid Strategy ◽

Dimensional Parameters ◽

Optimization Methodology ◽

Crank Mechanism

In this paper, an optimization procedure for path generation synthesis of the slider-crank mechanism will be presented. The proposed approach is based on a hybrid strategy, mixing local and global optimization techniques. Regarding the local optimization scheme, based on the null gradient condition, a novel methodology to solve the resulting non-linear equations is developed. The solving procedure consists of decoupling two subsystems of equations which can be solved separately and following an iterative process. In relation to the global technique, a multi-start method based on a genetic algorithm is implemented. The fitness function incorporated in the genetic algorithm will take as arguments the set of dimensional parameters of the slider-crank mechanism. Several illustrative examples will prove the validity of the proposed optimization methodology, in some cases achieving an even better result compared to mechanisms with a higher number of dimensional parameters, such as the four-bar mechanism or the Watt’s mechanism.

Download Full-text

A Compact Model for Spherical Rough Contacts

ASME/STLE 2004 International Joint Tribology Conference, Parts A and B ◽

10.1115/trib2004-64015 ◽

2004 ◽

Cited By ~ 3

Author(s):

M. Bahrami ◽

M. M. Yovanovich ◽

J. R. Culham

Keyword(s):

Pressure Distribution ◽

Entire Range ◽

Present Model ◽

Numerical Solutions ◽

Contact Radius ◽

Bulk Deformation ◽

Dimensional Parameters ◽

Maximum Contact ◽

Good Agreement ◽

Key Parameter

The contact of rough spheres is of high interest in many tribological, thermal, and electrical fundamental analyses. Implementing the existing models is complex and requires iterative numerical solutions. In this paper a new model is presented and a general pressure distribution is proposed that encompasses the entire range of spherical rough contacts including the Hertzian limit. It is shown that the non-dimensional maximum contact pressure is the key parameter that controls the solution. Compact expressions are proposed for calculating the pressure distribution, radius of the contact area, elastic bulk deformation, and the compliance as functions of the governing non-dimensional parameters. The present model shows the same trends as those of the Greenwood and Tripp model. Correlations proposed for the contact radius and the compliance are compared with experimental data collected by others and good agreement is observed.

Download Full-text

Non-dimensional parameters in isothermal theories of elastohydrodynamic lubrication

Tribology ◽

10.1016/s0041-2678(68)80545-7 ◽

1968 ◽

Vol 1 (3) ◽

pp. 188

Keyword(s):

Elastohydrodynamic Lubrication ◽

Dimensional Parameters

Download Full-text

Dimensional Design on the Six-Cable Driven Parallel Manipulator of FAST

Journal of Mechanical Design ◽

10.1115/1.4004988 ◽

2011 ◽

Vol 133 (11) ◽

Cited By ~ 34

Author(s):

Xiaoqiang Tang ◽

Rui Yao

Keyword(s):

Radio Telescope ◽

Parallel Manipulator ◽

Optimization Design ◽

Design Method ◽

Guizhou Province ◽

Large Span ◽

Similarity Model ◽

Dimensional Parameters ◽

Set Up ◽

Design Result

China is now building the world’s largest single dish radio telescope in Guizhou province, which is called Five-hundred meter Aperture Spherical radio Telescope (FAST). The main purpose of this paper is to present an effective dimensional design method on the six-cable driven parallel manipulator of FAST. Sensitivity design method is adopted for the six-cable driven parallel manipulator of FAST. Cable has the capability to bear tension but not compression, so that cable driven parallel manipulator may not be controlled as expected if tension of one cable is small or zero. Therefore, for dimensional design of the six-cable driven parallel manipulator, three functions to evaluate tension performance were proposed. The tension performance functions can reflect the uniformity of cable tension and controllability of the six-cable driven parallel manipulator. According to the sensitivity design method and tension performance evaluating functions, a set of optimized dimensional parameters is calculated for constructing the six-cable driven parallel manipulator of FAST. In order to verify the optimization design result, a similarity model of the six-cable driven parallel manipulator was set up in Beijing. A serial of experiments shows that tension performance of the six-cable driven parallel manipulator satisfies the system’s requirement. More importantly, it provides a theoretical reference for further study on dimensional design of a cable driven parallel manipulator with large span.

Download Full-text