Dual purpose barley as affected by date of sowing, varieties and stage of harvesting-A review

2017 ◽  
Vol 38 (02) ◽  
Author(s):  
Magan Singh ◽  
Avinash Chauhan ◽  
Rakesh Kumar ◽  
Deepa Joshi ◽  
Pooja Gupta Soni ◽  
...  
Keyword(s):  
Early Stage ◽  
Critical Issue ◽  
Rabi Season ◽  
Sowing Time ◽  
Dual Purpose ◽  
Beer Industry ◽  
Cereal Grain ◽  
Need To Evaluate ◽  
Grain Crop

Barley is primarily a cereal grain crop grown in rabi season and widely used for food, fodder and in beer industry. Dual purpose barley provides quality fodder as well as grain. Cutting at early stage at about 50-55 days after sowing, provides good quality of fodder particularly in lean period (mid December to mid January) for feeding to the animals. After harvesting for fodder, the regenerated crop left for grain production without sacrificing the grain yield with similar management as grain crop. For dual purpose barley need to evaluate the cultivars, optimum sowing time and stage of harvesting is a critical issue for production of good quality fodder as well as grain. Hence in this review article it has been emphasized for production of quality fodder and grain as influenced by date of sowing, dual barley variety used as suitable cultivars, and appropriate stage of harvesting which had been revealed and cited by different scientists, workers and co-workers.

Effect of primary processing on the distribution of free and modified Fusarium mycotoxins in naturally contaminated oats

2017 ◽  
Vol 10 (1) ◽  
pp. 73-88 ◽  
Author(s):  
L. Ivanova ◽  
S. Sahlstrøm ◽  
I. Rud ◽  
S. Uhlig ◽  
C.K. Fæste ◽  
...  
Keyword(s):  
High Resolution Mass Spectrometry ◽  
Human Consumption ◽  
In Planta ◽  
Modified Mycotoxins ◽  
Quantitative Mapping ◽  
Cereal Grain ◽  
Derivative Free ◽  
Grain Crop ◽  
Potential Food

Oat (Avena sativa L.) ranks seventh in the world cereal production and is considered to be an important source for many valuable components of nutritional and biological importance, i.e. proteins, fats, carbohydrates, fibre, minerals and vitamins. Because of these properties the amount of oat used for human consumption has increased progressively during the last years. Unfortunately, the quality of this grain crop is often compromised by mycotoxin contamination, which is relatively ubiquitous despite efforts to control the problem. Therefore, it is important to investigate the distribution pattern of mycotoxins and their conjugated derivatives in contaminated oat grains. For this purpose we have developed a state-of-the-art multi-mycotoxin high-resolution mass spectrometry method and analysed oat samples for their content of the most important mycotoxins commonly occurring in Norwegian cereal grain. Quantitative mapping of selected Fusarium free and modified mycotoxins was performed in fractions collected during processing trials consisting of dehulling and sequential pearling. Both the derivative free mycotoxins and their metabolites were mainly present in the hulls compared to the oat kernel, thus dehulling resulted in a significant reduction of the total mycotoxin load, followed by some further reduction by pearling. Furthermore, free and modified mycotoxins were unevenly distributed in relation to each other throughout the grain fractions, showing a shift towards glucosidated forms, such as deoxynivalenol-3-glucoside and HT-2-3-glucoside in the oat kernel, which highlights potential food safety concerns associated with in planta modified mycotoxins.

Patient satisfaction and comfort after a full-arch immediate loaded prosthesis

2020 ◽  
Author(s):  
Elena Dellepiane ◽  
Francesco Pera ◽  
Paola Zunino ◽  
Maria Grazia Mugno ◽  
Paolo Pesce ◽  
...  
Keyword(s):  
Quality Of Life ◽  
Oral Health ◽  
Intermediate Phase ◽  
Critical Issue ◽  
Health Impact ◽  
Immediate Loading ◽  
Oral Rehabilitation ◽  
Masticatory Ability ◽  
Chewing Ability

The aim of this study was to assess oral health related quality of life (OHRQoL) of patients before, during and after completion of implant-supported full-arch immediate loading rehabilitation according to the Columbus Bridge Protocol (CBP). 25 patients with compromised dentition were rehabilitated according to the CBP and were assessed for OHRQoL using 4 questionnaires specifically realized for this study and inspired to the OHIP (Oral Health Impact Profile) questionnaire. Patients assessed themselves before surgery, during the healing period (1 week and 2 months after surgery) and after definitive prosthodontic treatment (4 months after surgery). The questionnaires specifically investigated patients’ pain, confort, home oral hygiene habits, satisfaction related to esthetics, masticatory ability, phonetics and general satisfaction toward the treatment.Patients reported an improvement of OHRQoL after full-arch immediate loading rehabilitation. A statistically significant improvement in aesthetic and chewing ability was found. After 4 months 92% of the patients did not feel tense with their smile, 96% did not show problems to relate with other people or smiling, 92% did not show difficulty to eat some foods. Phonetics was found to be a critical issue, especially in the intermediate phase of healing. One week after surgery the percentage of patients who was very satisfied with phonetics slightly decreased from 48% to 36%. The assessment of patients' OHRQoL related to full-arch immediate loading implant therapy exhibited a significant improvement of their quality of life. The questionnaires herein presented could be an effective tool to evaluate patients' reaction to oral rehabilitation.

scholarly journals From Exploratory Tunnel to Base Tunnel: Hard Rock TBM Performance Prediction by Means of a Stochastic Approach

2020 ◽  
Vol 53 (12) ◽  
pp. 5473-5487 ◽  
Author(s):  
Andrea Rispoli ◽  
Anna Maria Ferrero ◽  
Marilena Cardu
Keyword(s):  
Performance Prediction ◽  
Early Stage ◽  
Tunnel Boring Machine ◽  
Stochastic Approach ◽  
Critical Issue ◽  
Utilization Factor ◽  
Tbm Performance ◽  
Factors Affecting ◽  
Tunnel Section ◽  
Input Variables

AbstractTunnel boring machine (TBM) performance prediction is often a critical issue in the early stage of a tunnelling project, mainly due to the unpredictable nature of some important factors affecting the machine performance. In this regard, deterministic approaches are normally employed, providing results in terms of average values expected for the TBM performance. Stochastic approaches would offer improvement over deterministic methods, taking into account the parameter variability; however, their use is limited, since the level of information required is often not available. In this study, the data provided by the excavation of the Maddalena exploratory tunnel were used to predict the net and overall TBM performance for a 2.96 km section of the Mont Cenis base tunnel by using a stochastic approach. The preliminary design of the TBM cutterhead was carried out. A prediction model based on field penetration index, machine operating level and utilization factor was adopted. The variability of the parameters involved was analysed. A procedure to take into account the correlation between the input variables was described. The probability of occurrence of the outcomes was evaluated, and the total excavation time expected for the tunnel section analysed was calculated.

scholarly journals Quality of Life among Bangladeshi Youth during the Early Stage of the COVID-19 Pandemic: A Single-site Survey

2021 ◽  
pp. 100157
Author(s):  
Somaresh Kumar Mondal ◽  
Abdul Gaffar Khan ◽  
Md. Mamun Ali ◽  
Mir Kaosar Ahamed ◽  
Kawsar Ahmed
Keyword(s):  
Quality Of Life ◽  
Early Stage ◽  
Single Site ◽  
Site Survey

scholarly journals Fast Multi-Focus Fusion Based on Deep Learning for Early-Stage Embryo Image Enhancement

Sensors ◽  
2021 ◽  
Vol 21 (3) ◽  
pp. 863
Author(s):  
Vidas Raudonis ◽  
Agne Paulauskaite-Taraseviciene ◽  
Kristina Sutiene
Keyword(s):  
Deep Learning ◽  
Image Fusion ◽  
Early Stage ◽  
Image Data ◽  
Cell Detection ◽  
Processing Times ◽  
Fused Image ◽  
Stage Embryo ◽  
Early Stage Embryo

Background: Cell detection and counting is of essential importance in evaluating the quality of early-stage embryo. Full automation of this process remains a challenging task due to different cell size, shape, the presence of incomplete cell boundaries, partially or fully overlapping cells. Moreover, the algorithm to be developed should process a large number of image data of different quality in a reasonable amount of time. Methods: Multi-focus image fusion approach based on deep learning U-Net architecture is proposed in the paper, which allows reducing the amount of data up to 7 times without losing spectral information required for embryo enhancement in the microscopic image. Results: The experiment includes the visual and quantitative analysis by estimating the image similarity metrics and processing times, which is compared to the results achieved by two wellknown techniques—Inverse Laplacian Pyramid Transform and Enhanced Correlation Coefficient Maximization. Conclusion: Comparatively, the image fusion time is substantially improved for different image resolutions, whilst ensuring the high quality of the fused image.

scholarly journals Breeding of Buckwheat for Usage of Sprout and Pre-Harvest Sprouting Resistance

Plants ◽  
2021 ◽  
Vol 10 (5) ◽  
pp. 997
Author(s):  
Tatsuro Suzuki ◽  
Takahiro Hara ◽  
Kenjiro Katsu
Keyword(s):  
Subsequent Growth ◽  
Local Economies ◽  
Cereal Grain ◽  
The World ◽  
New Varieties ◽  
Sprouting Resistance ◽  
Sprout Growth ◽  
Noodle Quality ◽  
Buckwheat Flour

Buckwheat is recognized as an important traditional crop and supports local economies in several regions around the world. Buckwheat is used, for example, as a cereal grain, noodle and bread. In addition, buckwheat is also used as a sprout or a young seedling. For these foods, sprouting is an important characteristic that affects food quality. For foods made from buckwheat flour, pre-harvest sprouting may decrease yield, which also leads to the deterioration of noodle quality. Breeding buckwheat that is resistant to pre-harvest sprouting is therefore required. Germination and subsequent growth are also important characteristics of the quality of sprouts. Although buckwheat sprouts are the focus because they contain many functional compounds, such as rutin, several problems have been noted, such as thin hypocotyls and husks remaining on sprouts. To date, several new varieties have been developed to resolve these quality issues. In this review, we summarize and introduce research on the breeding of buckwheat related to quality, sprouting and subsequent sprout growth.

Current measures of distress may not account for what's most important in existential care interventions: Results of the outlook trial

2020 ◽  
Vol 18 (6) ◽  
pp. 648-657
Author(s):  
Karen E. Steinhauser ◽  
Karen M. Stechuchak ◽  
Katherine Ramos ◽  
Joseph Winger ◽  
James A. Tulsky ◽  
...  
Keyword(s):  
Quality Of Life ◽  
Early Stage ◽  
Well Being ◽  
Primary Analysis ◽  
Significant Difference ◽  
Spiritual Well Being ◽  
Screening For Distress ◽  
Secondary Outcomes ◽  
Stage Renal Disease

AbstractObjectiveCompare the efficacy of two interventions addressing emotional and existential well-being in early life-limiting illness.MethodPrimary trial analysis (n = 135) included patients with advanced cancer, congestive heart failure, or end-stage renal disease; Arm 1 received the Outlook intervention, addressing issues of life completion and preparation, and Arm 2 received relaxation meditation (RM). Primary outcomes at five weeks (primary endpoint) and seven weeks (secondary): completion and preparation (QUAL-E); secondary outcomes: anxiety (POMS) quality of life (FACT-G) and spiritual well-being (FACIT-Sp) subscales of faith, meaning, and peace.ResultsAverage age was 62; 56% were post-high school-educated, 54% were married, 52% white, 44% female, and 70% had a cancer diagnosis. At baseline, participants demonstrated low levels of anxiety (<5 on POMS subscale) and depression (<10 on CESD) relative to population norms. Results of the primary analysis revealed no significant differences in mean Preparation by treatment arm at five weeks (14.4 Outlook vs. 14.8 RM; between-group difference −0.4 [95% CI, −1.6, 0.8], p = 0.49) or seven weeks (15.2 vs.15.4; between-group difference −0.2 [95% CI, −1.5, 1.0], p = 0.73). There were also no significant differences in mean Life Completion by treatment arm between five weeks (26.6 Outlook vs. 26.3 RM; between-group difference 0.2 [95% CI, −1.2, 1.7], p = 0.76) or seven weeks (26.5 vs. 27.5; between-group difference −1.0 [95% CI, −2.7, 0.7], p = 0.23). Compared to RM, Outlook participants did not have significant differences over time in the secondary outcomes of overall quality of life, anxiety, depression, FACT-G subscales, and FACIT-Sp subscales.DiscussionIn early-stage life-limiting illness, Outlook did not demonstrate a significant difference in primary or secondary outcomes relative to RM. Results underscore the importance of pre-screening for distress. Qualitatively, Outlook participants were able to express suppressed emotions, place illness context, reflect on adaptations, and strengthen identity. Screening for distress and identifying specified measures of distress, beyond anxiety and depression, is essential in our ability to adequately assess the multi-dimensional mechanisms that decrease existential suffering.

Sign in / Sign up

Export Citation Format

Share Document