scholarly journals Modeling Plant Stems Using the Deterministic Lindenmayer System

CAUCHY ◽  
2021 ◽  
Vol 6 (4) ◽  
pp. 286-295
Author(s):  
Juhari Juhari ◽  
Muhammad Zia Alghar
Keyword(s):  
Dimensional Space ◽  
Plant Morphology ◽  
Two Dimensions ◽  
Three Dimensions ◽  
Pine Tree ◽  
L System ◽  
System Method ◽  
System L ◽  
Plant Stem ◽  
Lindenmayer System

Plant morphology modeling can be done mathematically which includes roots, stems, leaves, to flower. Modeling of plant stems using the Lindenmayer System (L-system) method is a writing returns that are repeated to form a visualization of an object. Deterministic L-system method is carried out by predicting the possible shape of a plant stem using its iterative writing rules based on the original object photo. The purpose of this study is to find a model of the plant stem with Deterministic Lindenmayer System method which will later be divided into two dimensional space three. The research was conducted by identifying objects in the form of pine tree trunks measured by the angle, thickness, and length of the stem. Then a deterministic and parametric model is built with L-system components . The stage is continued by visualizing the model in two dimensions and three dimensions. The result of this research is a visualization of a plant stem model that is close to the original. Addition color, thickness of the stem, as well as the parametric writing is done to get the results resembles the original. The iteration is limited to less than 20 iterations so that the simulation runs optimal.

Dependance of Lindenmayer System (L-System) Parameters on Flow Characteristics in Engineered Biomaterials

2009 ◽  
Author(s):  
Ozlem Yasar ◽  
Shih Feng Lan ◽  
Binil Starly
Keyword(s):  
Flow Characteristics ◽  
Branch Length ◽  
Model Systems ◽  
Design Parameters ◽  
System Parameters ◽  
L System ◽  
System L ◽  
Lindenmayer System ◽  
Tissue Construct

Large thick tissue constructs have reported limited success primarily due to the inability of cells to survive deep within the scaffold. Without access to adequate nutrients, cells placed deep within the tissue construct will die out, leading to non-uniform tissue regeneration. In this research, we present several Lindenmayer system generated conduit networks in two and three-dimensional architecture with several degrees of complexity. The conduit network maintains a parent-child relationship between each branch of the network. Several L-system parameters have been studied—branching angle, branch length, ratio of parent to child branch diameter etc. We have developed a multi-physics based numerical model to predict the dependence of these L-system design parameters on the flow characteristics within the tissue construct. The implication of the simulation results will be discussed in terms of the design of 3D in-vitro tissue model systems.

Extension of the Spatial PDI Model to Three Dimensions

1997 ◽  
Vol 84 (1) ◽  
pp. 176-178
Author(s):  
Frank O'Brien
Keyword(s):  
Population Density ◽  
Dimensional Space ◽  
Finite Lattice ◽  
Three Dimensional ◽  
Upper Bounds ◽  
Three Dimensions ◽  
Lower And Upper Bounds ◽  
Density Index ◽  
Three Dimensional Space

The author's population density index ( PDI) model is extended to three-dimensional distributions. A derived formula is presented that allows for the calculation of the lower and upper bounds of density in three-dimensional space for any finite lattice.

scholarly journals Data on Orientation to Happiness in Higher Education Institutions from Mexico and El Salvador

Data ◽  
2020 ◽  
Vol 5 (1) ◽  
pp. 27
Author(s):  
Domingo Villavicencio-Aguilar ◽  
Edgardo René Chacón-Andrade ◽  
Maria Fernanda Durón-Ramos
Keyword(s):  
Higher Education ◽  
El Salvador ◽  
Latin American ◽  
Higher Education Institutions ◽  
Two Dimensions ◽  
Three Dimensions ◽  
Stepwise Multiple Regression ◽  
Teacher Student ◽  
And Gender ◽  
Student’S T

Happiness-oriented people are vital in every society; this is a construct formed by three different types of happiness: pleasure, meaning, and engagement, and it is considered as an indicator of mental health. This study aims to provide data on the levels of orientation to happiness in higher-education teachers and students. The present paper contains data about the perception of this positive aspect in two Latin American countries, Mexico and El Salvador. Structure instruments to measure the orientation to happiness were administrated to 397 teachers and 260 students. This data descriptor presents descriptive statistics (mean, standard deviation), internal consistency (Cronbach’s alpha), and differences (Student’s t-test) presented by country, population (teacher/student), and gender of their orientation to happiness and its three dimensions: meaning, pleasure, and engagement. Stepwise-multiple-regression-analysis results are also presented. Results indicated that participants from both countries reported medium–high levels of meaning and engagement happiness; teachers reported higher levels than those of students in these two dimensions. Happiness resulting from pleasure activities was the least reported in general. Males and females presented very similar levels of orientation to happiness. Only the population (teacher/student) showed a predictive relationship with orientation to happiness; however, the model explained a small portion of variance in this variable, which indicated that other factors are more critical when promoting orientation to happiness in higher-education institutions.

scholarly journals Free partition functions and an averaged holographic duality

2021 ◽  
Vol 2021 (1) ◽  
Author(s):  
Nima Afkhami-Jeddi ◽  
Henry Cohn ◽  
Thomas Hartman ◽  
Amirhossein Tajdini
Keyword(s):  
Partition Function ◽  
Spectral Gap ◽  
Central Charge ◽  
Three Dimensional ◽  
Two Dimensions ◽  
Three Dimensions ◽  
Partition Functions ◽  
General Constraints ◽  
Dimensional Gravity ◽  
Holographic Duality

Abstract We study the torus partition functions of free bosonic CFTs in two dimensions. Integrating over Narain moduli defines an ensemble-averaged free CFT. We calculate the averaged partition function and show that it can be reinterpreted as a sum over topologies in three dimensions. This result leads us to conjecture that an averaged free CFT in two dimensions is holographically dual to an exotic theory of three-dimensional gravity with U(1)c×U(1)c symmetry and a composite boundary graviton. Additionally, for small central charge c, we obtain general constraints on the spectral gap of free CFTs using the spinning modular bootstrap, construct examples of Narain compactifications with a large gap, and find an analytic bootstrap functional corresponding to a single self-dual boson.

Turbulent three-dimensional dielectric electrohydrodynamic convection between two plates

2012 ◽  
Vol 696 ◽  
pp. 228-262 ◽  
Author(s):  
A. Kourmatzis ◽  
J. S. Shrimpton
Keyword(s):  
Spatial Data ◽  
Three Dimensional ◽  
Reynolds Numbers ◽  
Two Dimensions ◽  
Three Dimensions ◽  
Energy Budgets ◽  
Turbulent Regime ◽  
Scalar Flux ◽  
Wide Range ◽  
Scalar Variance

AbstractThe fundamental mechanisms responsible for the creation of electrohydrodynamically driven roll structures in free electroconvection between two plates are analysed with reference to traditional Rayleigh–Bénard convection (RBC). Previously available knowledge limited to two dimensions is extended to three-dimensions, and a wide range of electric Reynolds numbers is analysed, extending into a fully inherently three-dimensional turbulent regime. Results reveal that structures appearing in three-dimensional electrohydrodynamics (EHD) are similar to those observed for RBC, and while two-dimensional EHD results bear some similarities with the three-dimensional results there are distinct differences. Analysis of two-point correlations and integral length scales show that full three-dimensional electroconvection is more chaotic than in two dimensions and this is also noted by qualitatively observing the roll structures that arise for both low (${\mathit{Re}}_{E} = 1$) and high electric Reynolds numbers (up to ${\mathit{Re}}_{E} = 120$). Furthermore, calculations of mean profiles and second-order moments along with energy budgets and spectra have examined the validity of neglecting the fluctuating electric field ${ E}_{i}^{\ensuremath{\prime} } $ in the Reynolds-averaged EHD equations and provide insight into the generation and transport mechanisms of turbulent EHD. Spectral and spatial data clearly indicate how fluctuating energy is transferred from electrical to hydrodynamic forms, on moving through the domain away from the charging electrode. It is shown that ${ E}_{i}^{\ensuremath{\prime} } $ is not negligible close to the walls and terms acting as sources and sinks in the turbulent kinetic energy, turbulent scalar flux and turbulent scalar variance equations are examined. Profiles of hydrodynamic terms in the budgets resemble those in the literature for RBC; however there are terms specific to EHD that are significant, indicating that the transfer of energy in EHD is also attributed to further electrodynamic terms and a strong coupling exists between the charge flux and variance, due to the ionic drift term.

scholarly journals On the forces that cable webs under tension can support and how to design cable webs to channel stresses

2019 ◽  
Vol 475 (2223) ◽  
pp. 20180781 ◽  
Author(s):  
Guy Bouchitté ◽  
Ornella Mattei ◽  
Graeme W. Milton ◽  
Pierre Seppecher
Keyword(s):  
Linear Programming ◽  
Convex Hull ◽  
Structural Engineering ◽  
Three Dimensional ◽  
Two Dimensions ◽  
Three Dimensions ◽  
Sufficient Condition ◽  
Necessary And Sufficient Condition ◽  
Finite Dimensional ◽  
Necessary And Sufficient

In many applications of structural engineering, the following question arises: given a set of forces f 1 ,  f 2 , …,  f N applied at prescribed points x 1 ,  x 2 , …,  x N , under what constraints on the forces does there exist a truss structure (or wire web) with all elements under tension that supports these forces? Here we provide answer to such a question for any configuration of the terminal points x 1 ,  x 2 , …,  x N in the two- and three-dimensional cases. Specifically, the existence of a web is guaranteed by a necessary and sufficient condition on the loading which corresponds to a finite dimensional linear programming problem. In two dimensions, we show that any such web can be replaced by one in which there are at most P elementary loops, where elementary means that the loop cannot be subdivided into subloops, and where P is the number of forces f 1 ,  f 2 , …,  f N applied at points strictly within the convex hull of x 1 ,  x 2 , …,  x N . In three dimensions, we show that, by slightly perturbing f 1 ,  f 2 , …,  f N , there exists a uniloadable web supporting this loading. Uniloadable means it supports this loading and all positive multiples of it, but not any other loading. Uniloadable webs provide a mechanism for channelling stress in desired ways.

scholarly journals PARALLEL DELAUNAY REFINEMENT: ALGORITHMS AND ANALYSES

2007 ◽  
Vol 17 (01) ◽  
pp. 1-30 ◽  
Author(s):  
DANIEL A. SPIELMAN ◽  
SHANG-HUA TENG ◽  
ALPER ÜNGÖR
Keyword(s):  
Mesh Size ◽  
Constant Factor ◽  
Two Dimensions ◽  
Three Dimensions ◽  
Delaunay Refinement ◽  
Steiner Points ◽  
Input Domain ◽  
Set Of Points ◽  
Refinement Algorithm

We present a parallel Delaunay refinement algorithm for generating well-shaped meshes in both two and three dimensions. Like its sequential counterparts, the parallel algorithm iteratively improves the quality of a mesh by inserting new points, the Steiner points, into the input domain while maintaining the Delaunay triangulation. The Steiner points are carefully chosen from a set of candidates that includes the circumcenters of poorly-shaped triangular elements. We introduce a notion of independence among possible Steiner points that can be inserted simultaneously during Delaunay refinements and show that such a set of independent points can be constructed efficiently and that the number of parallel iterations is O( log 2Δ), where Δ is the spread of the input — the ratio of the longest to the shortest pairwise distances among input features. In addition, we show that the parallel insertion of these set of points can be realized by sequential Delaunay refinement algorithms such as by Ruppert's algorithm in two dimensions and Shewchuk's algorithm in three dimensions. Therefore, our parallel Delaunay refinement algorithm provides the same shape quality and mesh-size guarantees as these sequential algorithms. For generating quasi-uniform meshes, such as those produced by Chew's algorithms, the number of parallel iterations is in fact O( log Δ). To the best of our knowledge, our algorithm is the first provably polylog(Δ) time parallel Delaunay-refinement algorithm that generates well-shaped meshes of size within a constant factor of the best possible.

scholarly journals Interaction between mean flow and turbulence in two dimensions

2016 ◽  
Vol 472 (2191) ◽  
pp. 20160287 ◽  
Author(s):  
Gregory Falkovich
Keyword(s):  
Short Note ◽  
Two Dimensions ◽  
Three Dimensions ◽  
Mean Flow ◽  
Turbulence Statistics ◽  
Planar Domains ◽  
Developed Turbulence ◽  
Aspect Ratios ◽  
Simple Geometry ◽  
Turbulent Cascade

This short note is written to call attention to an analytic approach to the interaction of developed turbulence with mean flows of simple geometry (jets and vortices). It is instructive to compare cases in two and three dimensions and see why the former are solvable and the latter are not (yet). We present the analytical solutions for two-dimensional mean flows generated by an inverse turbulent cascade on a sphere and in planar domains of different aspect ratios. These solutions are obtained in the limit of small friction when the flow is strong while turbulence can be considered weak and treated perturbatively. I then discuss when these simple solutions can be realized and when more complicated flows may appear instead. The next step of describing turbulence statistics inside a flow and directions of possible future progress are briefly discussed at the end.

scholarly journals Theoretical Studies of Convectively Forced Mesoscale Flows in Three Dimensions. Part II: Shear Flow with a Critical Level

2010 ◽  
Vol 67 (3) ◽  
pp. 694-712 ◽  
Author(s):  
Ji-Young Han ◽  
Jong-Jin Baik
Keyword(s):  
Shear Flow ◽  
Gravity Waves ◽  
Wind Direction ◽  
Critical Level ◽  
Deep Convection ◽  
Vertical Wind Shear ◽  
Finite Depth ◽  
Vertical Displacement ◽  
Two Dimensions ◽  
Three Dimensions

Abstract Convectively forced mesoscale flows in a shear flow with a critical level are theoretically investigated by obtaining analytic solutions for a hydrostatic, nonrotating, inviscid, Boussinesq airflow system. The response to surface pulse heating shows that near the center of the moving mode, the magnitude of the vertical velocity becomes constant after some time, whereas the magnitudes of the vertical displacement and perturbation horizontal velocity increase linearly with time. It is confirmed from the solutions obtained in present and previous studies that this result is valid regardless of the basic-state wind profile and dimension. The response to 3D finite-depth steady heating representing latent heating due to cumulus convection shows that, unlike in two dimensions, a low-level updraft that is necessary to sustain deep convection always occurs at the heating center regardless of the intensity of vertical wind shear and the heating depth. For deep heating across a critical level, little change occurs in the perturbation field below the critical level, although the heating top height increases. This is because downward-propagating gravity waves induced by the heating above, but not near, the critical level can hardly affect the flow response field below the critical level. When the basic-state wind backs with height, the vertex of V-shaped perturbations above the heating top points to a direction rotated a little clockwise from the basic-state wind direction. This is because the V-shaped perturbations above the heating top is induced by upward-propagating gravity waves that have passed through the layer below where the basic-state wind direction is clockwise relative to that above.

Comparison of Ice-Phase Microphysical Parameterization Schemes Using Numerical Simulations of Tropical Convection

1991 ◽  
Vol 30 (7) ◽  
pp. 985-1004 ◽  
Author(s):  
Michale McCumber ◽  
Wei-Kuo Tao ◽  
Joanne Simpson ◽  
Richard Penc ◽  
Su-Tzai Soong
Keyword(s):  
Cloud Model ◽  
Type Systems ◽  
Two Dimensions ◽  
Tropical Convection ◽  
Three Dimensions ◽  
Microphysical Properties ◽  
Cloud Models ◽  
Optimal Mix ◽  
Cloud Ice ◽  
Microphysical Parameterization

Abstract A numerical cloud model is used to evaluate the performance of several ice parameterizations. Results from simulations using these schemes are contrasted with each other, with an ice-free control simulation, and with observations to determine to what extent ice physics affect the realism of these results. Two different types of tropical convection are simulated. Tropical squall-type systems are simulated in two dimensions so that a large domain can be used to incorporate a complete anvil. Nonsquall-type convective lines are simulated in three dimensions owing to their smaller horizontal scale. The inclusion of ice processes enhances the agreement of the simulated convection with some features of observed convection, including the proportion of surface rainfall in the anvil region, and the intensity and structure of the radar brightband near the melting level in the anvil. In the context of our experimental design, the use of three ice classes produces better results than two ice classes or ice-free conditions, and for the tropical cumuli, the optimal mix of the bulk ice hydrometeors is cloud ice-snow-graupel. We infer from our modeling results that application of bulk ice microphysics in cloud models might be case specific, which is a significant limitation. This can have serious ramifications for microwave interpretation of cloud microphysical properties. Generalization of ice processes may require a larger number of ice categories than we have evaluated and/or the prediction of hydrometeor concentrations or particle-size spectra.

Sign in / Sign up

Export Citation Format

Share Document