scholarly journals The injector location impact on the fuel combustion process in a direct gasoline injection system

2018 ◽  
Vol 173 (2) ◽  
pp. 19-29
Author(s):  
Maciej SIDOROWICZ ◽  
Ireneusz PIELECHA
Keyword(s):  
Combustion Chamber ◽  
Direct Injection ◽  
Angular Position ◽  
Combustion Process ◽  
Optimal Solution ◽  
Injection System ◽  
Axial Distance ◽  
Cylinder Axis ◽  
Secondary Importance ◽  
Process Indicators

The article contains an analysis of the fuel dose combustion phenomena and exhaust emissions in a direct injection system of an SI engine for variable injector location in the combustion chamber. The research performed is a continuation of the research presented in the article CE-2018-104. The tests were performed using the AVL Fire 2017 simulation environment. 27 injector placement combinations in three planes were analyzed: axial distance from the cylinder axis, injector depth relative to the head and angular position relative to the cylinder axis. An optimal solution was chosen, taking into account the significance of individual indicators. It was shown that the greatest impact in terms of the most advantageous combustion process indicators is the injector setting depth in the combustion chamber cavity, while the distance from the cylinder axis is of secondary importance. The smallest changes in the combustion and emission factors values are seen with the change of the injector placement angle (in the value range used in this study).

scholarly journals Combustion Thermodynamics of Ethanol, n-Heptane, and n-Butanol in a Rapid Compression Machine with a Dual Direct Injection (DDI) Supply System

Energies ◽  
2021 ◽  
Vol 14 (9) ◽  
pp. 2729
Author(s):  
Ireneusz Pielecha ◽  
Sławomir Wierzbicki ◽  
Maciej Sidorowicz ◽  
Dariusz Pietras
Keyword(s):  
Heat Release ◽  
Combustion Chamber ◽  
Internal Combustion Engines ◽  
Direct Injection ◽  
Combustion Process ◽  
Combustion Efficiency ◽  
Injection System ◽  
Rapid Compression Machine ◽  
Process Indicators ◽  
Rapid Compression

The development of internal combustion engines involves various new solutions, one of which is the use of dual-fuel systems. The diversity of technological solutions being developed determines the efficiency of such systems, as well as the possibility of reducing the emission of carbon dioxide and exhaust components into the atmosphere. An innovative double direct injection system was used as a method for forming a mixture in the combustion chamber. The tests were carried out with the use of gasoline, ethanol, n-heptane, and n-butanol during combustion in a model test engine—the rapid compression machine (RCM). The analyzed combustion process indicators included the cylinder pressure, pressure increase rate, heat release rate, and heat release value. Optical tests of the combustion process made it possible to analyze the flame development in the observed area of the combustion chamber. The conducted research and analyses resulted in the observation that it is possible to control the excess air ratio in the direct vicinity of the spark plug just before ignition. Such possibilities occur as a result of the properties of the injected fuels, which include different amounts of air required for their stoichiometric combustion. The studies of the combustion process have shown that the combustible mixtures consisting of gasoline with another fuel are characterized by greater combustion efficiency than the mixtures composed of only a single fuel type, and that the influence of the type of fuel used is significant for the combustion process and its indicator values.

scholarly journals The impact of injector placement on the dose preparation conditions in a gasoline direct injection system

2018 ◽  
Vol 172 (1) ◽  
pp. 35-43
Author(s):  
Maciej SIDOROWICZ ◽  
Ireneusz PIELECHA
Keyword(s):  
Fuel Injection ◽  
Direct Injection ◽  
Angular Position ◽  
Combustion Process ◽  
Gasoline Direct Injection ◽  
Injection System ◽  
Secondary Importance ◽  
Preparation Conditions ◽  
Direct Fuel Injection ◽  
The Impact

Direct fuel injection requires appropriate conditions for proper ignition of the formed mixture. The proper combustion process is shaped by the direct fuel injection, whose parameters vary. Preparation of the dose requires proper injector placement in the combustion chamber. This article focuses on the issue of the injector specific spatial and angular position in order to implement the injection and atomization of the fuel. The injectors pseudo-optimal location has been presented along with several changed positions. The research was conducted as a simulation experiment using AVL FIRE 2017 software. The best position of the injector was selected based on the fuel spraying and injection process indicators. It has been shown that the spatial position has the most impact and the injector placement angle is of secondary importance.

scholarly journals Analysis of creation and combustion process of hydrogen-air mixtures by optical method in isochoric chamber

2017 ◽  
Vol 170 (3) ◽  
pp. 121-125
Author(s):  
Marek BRZEŻAŃSKI ◽  
Tadeusz PAPUGA ◽  
Łukasz RODAK
Keyword(s):  
Combustion Chamber ◽  
Flame Front ◽  
Dose Distribution ◽  
Optical Method ◽  
Direct Injection ◽  
Combustion Process ◽  
Variable Composition ◽  
Mixture Formation ◽  
Before And After

The article considers the analysis of combustion process of hydrogen-air mixture of variable composition. Direct injection of hydrogen into the isochoric combustion chamber was applied and the mixture formation took place during the combustion process. The influence of the dose distribution of the fuel supplied before and after ignition on the formation of the flame front and the course of the pressure in the isochoric combustion chamber was discussed. The filming process and registration of pressure in the isochoric chamber during research of combustion process was applied.

Experimental and Theoretical Optimization of Combustion Chamber and Fuel Distribution for the Low Emission Direct-Injection Diesel Engine

2002 ◽  
Vol 125 (1) ◽  
pp. 351-357 ◽  
Author(s):  
Y. Kidoguchi ◽  
M. Sanda ◽  
K. Miwa
Keyword(s):  
Diesel Engine ◽  
Combustion Chamber ◽  
Direct Injection ◽  
Combustion Process ◽  
Mixture Distribution ◽  
Initial Mixture ◽  
Injection Timing ◽  
Particulate Emissions ◽  
Particulate Emission ◽  
Direct Injection Diesel Engine

Effects of combustion chamber geometry and initial mixture distribution on the combustion process were investigated in a direct-injection diesel engine. In the engine experiment, a high squish combustion chamber with a squish lip could reduce both NOx and particulate emissions with retarded injection timing. According to the results of CFD computation and phenomenological modeling, the high squish combustion chamber with a central pip is effective to keep the combusting mixture under the squish lip until the end of combustion and the combustion region forms rich and highly turbulent atmosphere. This kind of mixture distribution tends to reduce initial burning, resulting in restraint of NOx emission while keeping low particulate emission.

Shaping the Combustion Chamber of a Piston Engine with Direct Injection of Gasoline

2019 ◽  
pp. 67-76
Author(s):  
R.Z. Kavtaradze ◽  
A.A. Kasko ◽  
A.A. Zelentsov
Keyword(s):  
Combustion Chamber ◽  
Direct Injection ◽  
Combustion Process ◽  
Three Dimensional ◽  
Numerical Control ◽  
Engine Operation ◽  
Model Fuel ◽  
Nonstationary Equations ◽  
Current Lines ◽  
Control Volumes

The object of the study was a six-cylinder in-line engine for land transport system with direct gasoline supply and forced ignition. The problem of shaping the combustion chamber is solved using the numerical control volumes method in a three-dimensional formulation. Nonstationary equations of energy, motion, diffusion and continuity in the Reynolds form, supplemented by the k-ζ-f model of turbulence, are used as a basis for modelling the engine operation. To model fuel combustion, an extended coherent flame model (ECFM) was used. Calculations were performed using the AVL FIRE software. The processes of mixture formation were optimized by considering the current lines and velocity fields of a moving charge, taking into account the geometry of the combustion chamber and intake and exhaust ports. As a result, the efficiency of the engine increased and the combustion process became more stable in the part load modes employing different fuel supply laws.

A New Predictive ID Model for Advanced High Speed Direct Injection Diesel Engines

2004 ◽  
Author(s):  
Lurun Zhong ◽  
Naeim A. Henein ◽  
Walter Bryzik
Keyword(s):  
Diesel Engines ◽  
High Speed ◽  
Direct Injection ◽  
Combustion Process ◽  
Operating Conditions ◽  
Injection System ◽  
Injection Timing ◽  
Common Rail Injection System ◽  
Common Rail Injection ◽  
Starting Conditions

Advance high speed direct injection diesel engines apply high injection pressures, exhaust gas recirculation (EGR), injection timing and swirl ratios to control the combustion process in order to meet the strict emission standards. All these parameters affect, in different ways, the ignition delay (ID) which has an impact on premixed, mixing controlled and diffusion controlled combustion fractions and the resulting engine-out emissions. In this study, the authors derive a new correlation to predict the ID under the different operating conditions in advanced diesel engines. The model results are validated by experimental data in a single-cylinder, direct injection diesel engine equipped with a common rail injection system at different speeds, loads, EGR ratios and swirl ratios. Also, the model is used to predict the performance of two other diesel engines under cold starting conditions.

Performance Evaluation of Low Heat Rejection Engines

1994 ◽  
Vol 116 (4) ◽  
pp. 758-764 ◽  
Author(s):  
X. Sun ◽  
W. G. Wang ◽  
R. M. Bata ◽  
X. Gao
Keyword(s):  
Fuel Injection ◽  
Direct Injection ◽  
Combustion Process ◽  
Engine Performance ◽  
Injection System ◽  
Fuel Injection System ◽  
Heat Rejection ◽  
Single Cylinder ◽  
Single Cylinder Engine ◽  
Low Heat Rejection Engine

Improving the performance of the Chinese B135 six-cylinder direct injection turbocharged and turbocompounded Low Heat Rejection Engine (LHRE) was based on experimental and analytical studies. The studies were primarily applied on a B1135 single-cylinder LHR engine and a conventional water-cooled B1135 single cylinder engine. Performance of the B1135 LHRE was worse than that of the conventional B1135 due to a deterioration in the combustion process of the B1135 LHRE. The combustion process was improved and the fuel injection system was redesigned and applied to the B135 six-cylinder LHRE. The new design improved the performance of the LHRE and better fuel economy was realized by the thermal energy recovered from the exhaust gases by the turbocompounding system.

Penetration and Vaporization of Diesel Fuel Sprays

1969 ◽  
Vol 184 (10) ◽  
pp. 147-170 ◽  
Author(s):  
R. Burt ◽  
K. A. Troth
Keyword(s):  
Combustion Chamber ◽  
Diesel Engines ◽  
Direct Injection ◽  
Combustion Process ◽  
Major Effect ◽  
Engine Fuel ◽  
Liquid Droplets ◽  
Fuel Sprays ◽  
Air Movement ◽  
Air Mixing

In the diesel engine, fuel is injected into the hot, compressed air in the combustion chamber. Thus the process of diesel combustion is essentially inhomogeneous, and the mixing of the fuel and air in the combustion chamber dominates the whole combustion process. Since fuel–air mixing is so important the distribution of the injected fuel has a major effect on combustion performance. This is particularly true of direct-injection diesel engines which have relatively low rates of air movement. In all diesel engines, fuel is injected into the combustion chamber at high pressure through small nozzles. The high-velocity liquid jet atomizes, after emerging from the nozzle, into a spray of liquid droplets. The penetration, distribution, and vaporization of the sprays, together with the air movement, govern the mixing of fuel and air. The penetration of fuel sprays is dealt with in Part 1 of the paper; Part 2 describes a study of the vaporization of fuel sprays.

Simulation Research on Post-Injection of Electronically Controlled Heavy-Duty Diesel Engine

2011 ◽  
Vol 121-126 ◽  
pp. 2238-2242
Author(s):  
Ming Hai Li ◽  
Feng Jiang ◽  
Biao Liu ◽  
Ming Gao Ouyang
Keyword(s):  
Diesel Engine ◽  
Fuel Injection ◽  
Direct Injection ◽  
Combustion Process ◽  
Pressure Rise ◽  
Injection System ◽  
Post Injection ◽  
Simulation Research ◽  
Di Diesel Engine ◽  
Heavy Duty Diesel

GT-Suite software is used to establish the simulation model of electronic fuel injection system for 16V280ZJ diesel engine. Combustion process simulation calculation is conducted to the direct injection (DI) diesel engine based on a main-post double injection scheme. Simulation parameters are modified based on the comparison with given experimental results. The calculation results effectively reflect the influence of fuel ratio and the interval angle between main and post injection over emission and fuel economy. Finally, in order to improve the engine emissions and reduce the pressure rise rate, we get the optimal injection solution for the main-post injection mode.

Potential of alcohol fuels in active and passive pre-chamber applications in a passenger car spark-ignition engine

2021 ◽  
pp. 146808742110531
Author(s):  
Patrick Burkardt ◽  
Christian Wouters ◽  
Stefan Pischinger
Keyword(s):  
Combustion Chamber ◽  
Alternative Fuels ◽  
Direct Injection ◽  
Combustion Process ◽  
Spark Ignition ◽  
Spark Ignition Engine ◽  
Passenger Car ◽  
Excess Air ◽  
Lean Limit ◽  
Alcohol Fuels

Both the shift from fossil to alternative fuels and the implementation of a pre-chamber combustion system allow for an increase in the efficiency of an internal combustion engine through optimizing its combustion process, while simultaneously reducing the engine-out emissions. The combination of alcohol-based fuels and pre-chamber combustion concepts has not been investigated on spark-ignition engines with high compression ratios in a passenger car size. This study presents investigations to show the potential in maximum achievable lean limit and net indicated efficiency. In particular, we present investigations of two alternative alcohol fuels on a direct-injection spark-ignition single-cylinder research engine for passenger car applications with a compression ratio of 16.4. The engine was operated with both an active and a passive pre-chamber, and the experimental results were compared to those of conventional spark-ignition operation. Direct injection was used for both the main combustion chamber and the pre-chamber. Methanol and ethanol were used as fuels for the main combustion chamber, whereas exclusively ethanol was used for the pre-chamber fueling. The performance of the alcohol fuels in all combustion configurations was evaluated in both part-load and high-load conditions. In particular, investigations of the combustion behavior over a variation of the excess air ratio at indicated mean effective pressures of 6 and 15 bar were performed. It can be concluded that with the use of methanol as fuel for the main combustion chamber, both higher excess air ratios and higher indicated efficiencies were achieved compared to the use of ethanol as the main combustion chamber fuel. In particular, a maximum net indicated efficiency of 48% at an excess air ratio of 2.0 was achieved with methanol. Moreover, active pre-chamber operation extended the lean limit to an excess air ratio of 2.3 compared to the maximum lean limit of 1.7 in passive pre-chamber operation.

Sign in / Sign up

Export Citation Format

Share Document