scholarly journals Pemetaan Sebaran Karamba Jaring Apung Berdasarkan Zona Dan Tingkat Skala Usaha Menggunakan Drone Di Waduk Riam Kanan Provinsi Kalimantan Selatan

2020 ◽  
Vol 16 (2) ◽  
pp. 276
Author(s):  
Muhammad Nur ◽  
Muhammad Ahsin Rifa'i ◽  
Rizmi Yunita ◽  
Leila Ariyani Sofia

Aquaculture is growing rapidly in Banjar District of Kalimantan Selatan Province, including on Riam Kanan Reservoir which is a center for floating net cage aquaculture. The increasing aquaculture on Riam Kanan Reservoir is not supported by adequate and actual data regarding the distribution, number of plots and number of fishery household (FHs) of floating net cage aquaculture. Complete, accurate and actual data is needed as one of the considerations in implementing sustainable aquaculture management policies. This study aims to map the distribution of floating net cages based on zones and business scale level, analyze the number of plots and the number of FHs of floating net cage aquaculture on Riam Kanan Reservoir. The study was conducted in July-October 2019 using 2 survey methods: a drone survey to collect aerial photographs and a field survey to identify the number of FHs and floating net cage plots based on business scale level. The results of aerial photography were analyzed using the Agisoft Metashape Professional and Arcgis 10.7 applications. Field survey data were analyzed using the Archgis 10.7 application and Microsoft Excel. The floating net cage is spread over 6 zones totaling 4,263 plots, consisting of criteria for small business scale 1,774 plots, medium scale 1,234 plots and large scale 1,255 plots. FHs of floating net cage aquaculture spread in 7 villages as many as 425 units with the criteria of 331 small scale business, 87 medium scale and 28 large scale. The plots and FHs of floating net cage aquaculture on Riam Kanan Reservoir has increased significantly over the past 4 years.

1987 ◽  
Vol 9 ◽  
pp. 247-248
Author(s):  
Yu. F. Knizhnikov ◽  
V.I. Kravtsova ◽  
I.A. Labutina

Remote-sensing methods in monitoring the glacierization of Mount EI‛ brus are used to produce base and dynamic maps, and to obtain quantitative information (dynamic indices) about the rate, intensity, and variations of the process. The monitoring system is divided, according to scope and territory covered, into small-scale for total glacierization and the periglacial zone, medium-scale for separate glaciers, and large-scale (detailed) for part of the glaciers or sectors of the adjoining slopes. The approximate relationship of even scales is 1 : 4. Small-scale monitoring remote-sensing systems are important for making maps showing the complex characteristics of the glaciological system. A series of maps was produced including geographical, those of high-altitude zones, slope and exposure angles, geological, glaciomorphological, climatic (temperature, precipitation, and winds), distribution of direct solar radiation, hydrological (source of streams), seats of avalanches, and landslides. All these data serve as a cartographical basis in monitoring the glacierization of Mount EI‛ brus. They are compiled from remotely sensed and Earth-based data. Current monitoring on a small scale includes observations of the conditions which determine the existence of the glacial system - this includes data on winter snowfall and the period of snow cover. These observations were obtained from meteorological and resource satellites, and from scanner data of medium and high resolution. Also important are observations of changes in the outline of glaciers, times of snowfall and character of the distribution of snow, and its redistribution due to avalanches and snowstorms. High-resolution space photographs, small-scale aerial photographs, and aerovisual observations provide the data for these observations. It has been determined that the area of the glaciers of Mount El‛ brus has been reduced by 1 % in the last 25 years, i.e. the rate of its deglacierization dropped sharply as compared to preceding decades. The role of quantitative information gains importance in the medium-scale level of monitoring. Topographical maps of separate glaciers compiled from aerial photographs or data from ground stereo-photogrammetric surveys constitute the base maps at this level. The main method used in monitoring were large-scale surveys from aircraft, perspective surveys from helicopters, and phototheodolite surveys. Multi-date surveys of the glaciers provide data about the changes in their outlines and height, the character of their relief, their moraines, the amount of snow accumulation and ablation in separate years, the surface rates of ice flow and their fluctuations. The techniques by which quantitative information is obtained about changes in the glaciers are derived from processing the data of multi-date surveys. The organization and techniques of phototheodolite surveys have been improved. A theory evolved for determining the surface-ice movement by stereo-photogrammetric means and the technique for it has also improved; algorithms and programs for machine processing of the data of multi-date surveys (ground and from aircraft) have been produced At this level of monitoring, it has been found that the retreat rate of most glaciers has slowed down and several glaciers are now in equilibrium. Several glaciers became active at the beginning of the 1970s and 1980s; this was accompanied by an increase in their height and forward movement. For example, activation of Kyukyurtlyu Glacier has been recorded (higher surface and increasing flow rate) which has caused the glacier to move forward 100 m. Surveys at an interval of 2 years recorded the beginning of the process of retreat of this glacier. Detailed monitoring is used to detect the mechanism of the dynamic processes and to study it on local representative sectors. On a glacier it may take the form of annual surveys of its tongue, which makes it possible to observe the processes of formation of moraines and glacio-fluvial relief. Studies may also be made of the mechanism of the movement of avalanches and landslides, deducing their quantitative characteristics and appraising the results of avalanches and landslides. Multi-date surveys of sectors of the slopes provide information about processes in the periglacial zone. At this level, regularly repeated ground stereo-photogrammetric surveys are the main means of observation. Glaciological remote-sensing monitoring provides a wealth of data for theoretical development in the field of glaciology. It makes it possible to forecast and produce warnings about hazardous processes and phenomena.


1987 ◽  
Vol 9 ◽  
pp. 247-248
Author(s):  
Yu. F. Knizhnikov ◽  
V.I. Kravtsova ◽  
I.A. Labutina

Remote-sensing methods in monitoring the glacierization of Mount EI‛ brus are used to produce base and dynamic maps, and to obtain quantitative information (dynamic indices) about the rate, intensity, and variations of the process. The monitoring system is divided, according to scope and territory covered, into small-scale for total glacierization and the periglacial zone, medium-scale for separate glaciers, and large-scale (detailed) for part of the glaciers or sectors of the adjoining slopes. The approximate relationship of even scales is 1 : 4.Small-scale monitoring remote-sensing systems are important for making maps showing the complex characteristics of the glaciological system. A series of maps was produced including geographical, those of high-altitude zones, slope and exposure angles, geological, glaciomorphological, climatic (temperature, precipitation, and winds), distribution of direct solar radiation, hydrological (source of streams), seats of avalanches, and landslides. All these data serve as a cartographical basis in monitoring the glacierization of Mount EI‛ brus. They are compiled from remotely sensed and Earth-based data.Current monitoring on a small scale includes observations of the conditions which determine the existence of the glacial system - this includes data on winter snowfall and the period of snow cover. These observations were obtained from meteorological and resource satellites, and from scanner data of medium and high resolution. Also important are observations of changes in the outline of glaciers, times of snowfall and character of the distribution of snow, and its redistribution due to avalanches and snowstorms. High-resolution space photographs, small-scale aerial photographs, and aerovisual observations provide the data for these observations. It has been determined that the area of the glaciers of Mount El‛ brus has been reduced by 1 % in the last 25 years, i.e. the rate of its deglacierization dropped sharply as compared to preceding decades.The role of quantitative information gains importance in the medium-scale level of monitoring. Topographical maps of separate glaciers compiled from aerial photographs or data from ground stereo-photogrammetric surveys constitute the base maps at this level. The main method used in monitoring were large-scale surveys from aircraft, perspective surveys from helicopters, and phototheodolite surveys. Multi-date surveys of the glaciers provide data about the changes in their outlines and height, the character of their relief, their moraines, the amount of snow accumulation and ablation in separate years, the surface rates of ice flow and their fluctuations. The techniques by which quantitative information is obtained about changes in the glaciers are derived from processing the data of multi-date surveys. The organization and techniques of phototheodolite surveys have been improved. A theory evolved for determining the surface-ice movement by stereo-photogrammetric means and the technique for it has also improved; algorithms and programs for machine processing of the data of multi-date surveys (ground and from aircraft) have been producedAt this level of monitoring, it has been found that the retreat rate of most glaciers has slowed down and several glaciers are now in equilibrium. Several glaciers became active at the beginning of the 1970s and 1980s; this was accompanied by an increase in their height and forward movement. For example, activation of Kyukyurtlyu Glacier has been recorded (higher surface and increasing flow rate) which has caused the glacier to move forward 100 m. Surveys at an interval of 2 years recorded the beginning of the process of retreat of this glacier.Detailed monitoring is used to detect the mechanism of the dynamic processes and to study it on local representative sectors. On a glacier it may take the form of annual surveys of its tongue, which makes it possible to observe the processes of formation of moraines and glacio-fluvial relief. Studies may also be made of the mechanism of the movement of avalanches and landslides, deducing their quantitative characteristics and appraising the results of avalanches and landslides. Multi-date surveys of sectors of the slopes provide information about processes in the periglacial zone. At this level, regularly repeated ground stereo-photogrammetric surveys are the main means of observation.Glaciological remote-sensing monitoring provides a wealth of data for theoretical development in the field of glaciology. It makes it possible to forecast and produce warnings about hazardous processes and phenomena.


1987 ◽  
Vol 35 (2) ◽  
pp. 135 ◽  
Author(s):  
RB Hacker

Species responses to grazing and environmental factors were studied in an arid halophytic shrubland community in Western Australia. The grazing responses of major shrub species were defined by using reciprocal averaging ordination of botanical data, interpreted in conjunction with a similar ordination of soil chemical properties and measures of soil erosion derived from large-scale aerial photographs. An apparent small-scale interaction between grazing and soil salinity was also defined. Long-term grazing pressure is apparently reduced on localised areas of high salinity. Environmental factors affecting species distribution are complex and appear to include soil salinity, soil cationic balance, geomorphological variation and the influence of cryptogamic crusts on seedling establishment.


Jurnal AKTUAL ◽  
2019 ◽  
Vol 16 (1) ◽  
pp. 47
Author(s):  
Aisah Aisah

Rice Milling Company is rice industry’s oldest and largest classified in Indonesia, which is able to absorb more than 10 million workers, handles more than 40 million tons of grain.  Rice Milling Company agro-industy is the central point, because this is where the main product is obtained in the form of rice and raw materials for advanced processing of food and industrial products.  Rice Miling Unit in the district of OKU Timur there is some skala, ranging form small-scale, medium-scale to large-scale.  Fuctional benefits of each different scale milling is also different.  The average rice farmers often sell gabahnya to the rice milling unit closest to the place residence, whether it is large-scale, medium and small.  Rice produced by the milling-grinding different quality.  Usually when a large-scale millimg yield of rice is cleaner than the other scale.  But it does not become a reference for milling grain milling usually depends on consumer demand.  The purpose of the study are : 1.  To determine levels of volume (tonnage) and the retention time of each service fuctional rice storage (barns) wich carried a different scale rice milling unit.  2.  To determine differences in the bebefits of economic transactions received by farmers and rice millers of different scale of business, especially when seen from the level of the milling costs, the purchase price of rice by rice milling unit, and the quality of milling services and service scale.  The result show that : the fuctional role of each is different milling.  Large-scale milling has three fuctional roles are : Processing, storage and distribution.  Medium-scale miling functional has two roles, namely : processing and distribution.  While small-scale rice milling unit has only two functional roles are : processing and storage.


2018 ◽  
Vol 39 (3) ◽  
pp. 1211
Author(s):  
Flávio De Moraes ◽  
Marcos Aurélio Lopes ◽  
Francisval De Melo Carvalho ◽  
Afonso Aurélio de Carvalho Peres ◽  
Fábio Raphael Pascoti Bruhn ◽  
...  

This study investigates the cost-effectiveness of 20 demonstration units (DUs) belonging to the "Balde Cheio" program. The units in question are from the state of Rio de Janeiro, Brazil, dating from January to December 2011, and are sorted according to the scale of production (small, medium and large). The data were analyzed using Predictive Analytical software (PASW) 18.0. The scale of production influenced the total cost of milk production, and therefore profitability and cost-effectiveness. The large-scale stratum showed the lowest total unit cost. The positive results in medium and large scales in milk production lead to optimal conditions for long-term production, with the capitalization of cowmen. The items regarding the effective operating cost (EOC) with the biggest influence on the costs of dairy activity in the small scale stratum were food, energy and miscellaneous expenses. In the medium scale, these were food, labor force, and miscellaneous expenses. Finally, in the large scale, they were food, labor force and energy. In the small and large scale, the items regarding the total cost with the biggest influence on the costs of dairy activity were food, labor force, and return on capital, while in the medium scale, they were food, return on capital, and labor force. The average break-even point of 14 of the DUs was higher than the average daily production.


2019 ◽  
Vol 10 (1) ◽  
pp. 45-56 ◽  
Author(s):  
Jiake Li ◽  
Cong Mu ◽  
Chenning Deng ◽  
Menghua Ma

Abstract The storm water management models were established at three spatial scales (large, medium, and small) based on a sponge city pilot area in China to explore the hydrological and environmental effects of rainfall conditions and development modes. Results showed the following. (1) Total runoff reduction rates increased from 26.7% to 53.9% for the rainfall event of a 2-year recurrence period as the scale increased. For 5-year and above recurrence periods, total runoff reduction rates were 19.5–49.4%. These rates increased from the small to medium scale and slightly decreased from the medium to large scale. (2) The runoff coefficients were 0.87–0.29, which decreased from the small to medium scale and were basically constant from the medium to large scale. (3) The peak flow reduction rates decreased with increased recurrence periods. The rates increased initially and then decreased at the small scale, whereas the opposite trend occurred at the medium scale. (4) The reduction rates of pollutants were negatively correlated with recurrence periods under the three spatial scales. The pollution load reduction rates were 19.5–54.7%, which increased from the small to medium scale and were basically constant from the medium to large scale.


2014 ◽  
Vol 556-562 ◽  
pp. 916-920
Author(s):  
Yu Huan Li ◽  
Deng Qiu Li ◽  
Jie Wu

The spatial variability of single ecological factors of the farmland and the synergies among the ecological factors were studied by using geostatistical analysis and factorial kriging analysis (FKA).The results show that all of the spherical models of the co-variogram can be grouped into four parts: the nugget part, the small-scale part, the medium-scale part, and the large-scale part. The mean value of the small-scale range (1.12-1.85 km) is approximately 1.50 km, that of the medium-scale range (3.40-4.10 km) is approximately 3.8 km, and that of the large-scale range (9.35-10.10 km) is approximately 9.8 km. The correlations between each factor on the four scales vary, and the correlation between each factor on the medium scale is the strongest. In this paper, the ecological factors of the farmland on the medium scale have relatively consistent variability and sources, indicating that all of the factors on that scale have a high coordination.


Author(s):  
Neeru Yadav

Abstract: Six Sigma is a tool which helps industries to control the defects and all other issues which can be possible factors to reduce the growth of the company. It was seen that in large scale industries, the Six Sigma is used form previous decades but when goes to small and medium scale industries, there is lack of implementation of Six Sigma and its tools, so in present review paper, various research papers selected in which small and medium scale industries are selected. In this paper all possible aspects of the Six Sigma is presented in detail. Keywords: Six Sigma, Tools, Small Scale Industries, DMAIC approach, Manufacturing Industries


2020 ◽  
Vol 5 (1) ◽  
pp. 37
Author(s):  
Taufan Daniarta Sukarno

Poultry sectors contributed 2,51% of GDRP in the Central Java Province, where Semarangcontributed 1.135.487 kg of Broilers chicken in 2016. Plasma-core partnership is one of the most used business cooperation types amongst the poultry farmers. Classification in poultry business scale divides into 3 classes, which were: Small Scale (≤5.000 heads), Medium Scale (5.001-10.000 heads) and Large Scale (>10.000 head). The purpose of this study is to estimate the operating cashflows and revenue. The benefit of this study is to detect the profits and anticipate losses in poultry farming. This study used Survey methods, location arrangement used purposive sampling and data collected by interviews with the owners. Data analysis used revenue and operating cash flow computation. The results of this study show the net revenue of this poultry farm is IDR.171.488.834, while the operating cash flows are IDR.170.286.117,65. The cost of chicken seedlings purchase and its feed is the most expensive amongst all subjects. Clustering results shows that this poultry was categorized as Small scale poultry, where it’s population is only 4.000 chickens, but are profitable and worthy to expand, and makes it one of the most longest-living poultry farms in the region


1976 ◽  
Vol 13 (10) ◽  
pp. 1422-1432 ◽  
Author(s):  
Andrew D. Miall

The Eureka Sound Formation of northern Banks Basin is a deltaic unit of Paleocene to Eocene age. A basal member of shale, approximately 100 m thick, passes vertically and, in part, laterally into a succession of sand, silt, shale, and lignitic coal approximately 1000 m thick, which is referred to as the cyclic member because of the abundance of coarsening-upward cycles, averaging 7.4 m in thickness.Sand beds in the cyclic member can be divided into four lithofacies: (1) A facires dominated by medium- to large-scale planar crossbedding, formed by channel processes, including lateral point bar accretion, in the delta plain environment. (2) A predominance of medium-scale trough and (minor) planar crossbeds, formed by migrating dunes in distributary mouth bar sands. (3) A predominance of small-scale ripple-marks, formed by low energy, unimodal currents in distal distributary mouth sands. (4) A lack of current structures, indicating quiet-water, interdeltaic and prodeltaic deposition. The distribution of these four facies outlines a series of small lobate deltas.Paleocurrent data suggest a pattern of radiating distributaries within each delta lobe. Directional variance, when analyzed at various levels of the sedimentary structure hierarchy, provides information regarding channel sinuosity and enables comparisons to be made with other deltaic deposits. High variance for the directions of the distributaries is consistent with a fluvially dominated delta.


Sign in / Sign up

Export Citation Format

Share Document