scholarly journals ANALISIS STABILITAS DAN PERKUATAN LERENG MENGGUNAKAN PLAXIS2D DI DESA SUKARESMI, SUKABUMI, JAWA BARAT

2019 ◽  
Vol 5 (2) ◽  
Author(s):  
A'isyah Salimah ◽  
Muhammad Fathur Rouf Hasan ◽  
Suripto Suripto ◽  
Yelvi Yelvi ◽  
Imam H Sasongko
Keyword(s):  
Slope Stability ◽  
Safety Factor ◽  
Retaining Wall ◽  
Soil Surface ◽  
Retaining Walls ◽  
Environmental Damage ◽  
Field Investigations ◽  
Base Transceiver Station ◽  
The Stability ◽  
The Impact

Permukaan tanah tidak semua berbentuk bidang datar, namun memiliki perbedaan ketinggian dan kemiringan pada setiap daerah. Perbedaan ketinggian tanah mampu mengakitbatkan terjadinya pergerakan tanah yaitu longsor. Keberadaan bangunan base transceiver station (BTS) tower di Desa Sukaresmi, Cisaat, Sukabumi yang berada pada daerah lereng curam dengan kondisi retaining wall dan pagar dalam keadaan retak dan mengalami penurunan tanah menjadi salah satu faktor yang mengancam keselamatan. Untuk mengantisipasi dampak kerusakan lingkungan bertambah parah dibutuhkan penanganan khusus. Penelitian ini bertujuan untuk melakukan analisis stabilitas dan perkuatan lereng menggunakan software Plaxis2D. Adapun metode penelitian dilakukan dengan melakukan investigasi lapangan secara langsung, pengujian laboratorium, analisis stabilitas perkuatan lereng dengan software Plaxis2D serta rekomendasi perbaikan drainase. Upaya perkuatan lereng dengan mengganti dan memperdalam retaining wall existing. Hasil perkuatan lereng dapat meningkatkan nilai safety factor menjadi 1,369, nilai ini lebih besar dari safety factor existing sebesar 1,302. Kata kunci: cisaat, longsor, Plaxis2D, stabilitas lereng. The soil surface is believed to have differences in height and slope in each region. The different elevation could cause land movements namely landslides. The existence of tower base transceiver station (BTS) buildings in Sukaresmi Village, Cisaat,  Sukabumi on a deep slope area with cracked retaining walls and fences condition which experienced settlement is one of the factors that threaten safety. To anticipate the impact of environmental damage getting worse requires special handling. The aim  of this study is to analyze the stability and slope reinforcement using Plaxis2D software. The research method is carried out by conducting direct field investigations, laboratory tests, reinforced slope stability analysis with Plaxis2D software and drainage refinement recommendations. Countermeasures to strengthen the slope are done by replacing and deepening the existing retaining wall. The result of this measure is the increase of the safety factor value to 1,369, this value is greater than the value of the existing safety factor of 1,302. Keywords : cisaat, landslide, Plaxis2D, slope stability.

scholarly journals ANALISIS STABILITAS LERENG MENGGUNAKAN SOFTWARE PLAXIS 8.6 DENGAN DINDING PENAHAN TANAH (RETAINING WALL) (STUDI KASUS RUAS JALAN NASIONAL BANDA ACEH-MEDAN STA 83+135 GUNUNG SEULAWAH)

2018 ◽  
Vol 1 (3) ◽  
pp. 76-82
Author(s):  
Wihardi Wihardi ◽  
Munirwansyah Munirwansyah ◽  
Sofyan M. Saleh
Keyword(s):  
Slope Stability ◽  
Safety Factor ◽  
Retaining Wall ◽  
Road Construction ◽  
Local Area ◽  
Traffic Load ◽  
Road Infrastructure ◽  
The Road ◽  
The Stability ◽  
Banda Aceh

Road infrastructure is very important and is a key enabler for the economy. If the road infrastructure was damaged or had various problems such as sliding, the movement of goods and passengers will be hampered and delayed to the acceleration of development in the local area. The landslide and movement of groundwater is a problem that often occurs repeatedly on some streets. Therefore, it is necessary to study the strengthening of the slopes at the bottom of the road construction with retaining wall. This study aims to analyze slope stability by getting numbers Safety Factor (FK). The analysis is used to analyze the stability of slopesusing the finite element method with the help of software Plaids, The scope of this review includes the calculation of slope stability at the national road from Banda Aceh - Medan Sta. 83 + 185 Mount Selawah. The results of slope stability analysis on the existing condition by using Plaxis software at the point of a review is not safe (FK 1.25). Thus, it is done handling the retaining wall, installation of anchors. Based on the analysis of slope stability after being given the strengthening of the slopes with a retaining wall and the installation of anchors using Plaxis software under the influence of traffic load in an unsafe condition (FK 1.25). Then additional handling is done by changing the angle of the slope so that the value of the safety factor (FK) 1.25.

scholarly journals Influence of parameters of retaining walls and loose soils on the stability of slopes in the new construction of residential complexes

2020 ◽  
pp. 65-75
Author(s):  
Liudmyla Skochko ◽  
Viktor Nosenko ◽  
Vasyl Pidlutskyi ◽  
Oleksandr Gavryliuk
Keyword(s):  
Finite Element ◽  
Slope Stability ◽  
Cross Sections ◽  
Retaining Wall ◽  
Retaining Walls ◽  
Natural State ◽  
Soil Parameters ◽  
Stability Of Slopes ◽  
The Stability ◽  
Stage 1

The stability of the slope in the existing and design provisions is investigated, the constructive decisions of retaining walls on protection of the territory of construction of a residential complex in a zone of a slope are substantiated. The stability of the slope when using rational landslide structures is estimated. The results of the calculation of the slope stability for five characteristic sections on the basis of engineering-geological survey are analyzed. For each of the given sections the finite-element scheme according to the last data on change of a relief is created. The slope was formed artificially by filling the existing ravine with construction debris from the demolition of old houses and from the excavation of ditches for the first houses of the complex. Five sections along the slope are considered and its stability in the natural state and design positions is determined. Also the constructive decisions of retaining walls on protection of the territory of construction of a residential complex as along the slope there are bulk soils with various difference of heights are substantiated. This requires a separate approach to the choice of parameters of retaining walls, namely the dimensions of the piles and their mutual placement, as well as the choice of the angle of the bulk soil along the slope. The calculations were performed using numerical simulation of the stress-strain state of the system "slope soils-retaining wall" using the finite element method. An elastic-plastic model of soil deformation with a change in soil parameters (deformation module) depending on the level of stresses in the soil is adopted. Hardening soil model (HSM) used. Calculations of slope stability involve taking into account the technological sequence of erection of retaining walls and modeling of the phased development of the pit. The simulation was performed in several stages: Stage 1 - determination of stresses from the own shaft, Stage 2 - assessment of slope stability before construction, Stage 3 - installation of retaining wall piles, Stage 4 - assessment of slope stability after landslides. Based on these studies, practical recommendations were developed for the design of each section of the retaining wall in accordance with the characteristic cross-sections.

scholarly journals DESIGN OF RETAINING WALL USING ALTERNATIVE GABION AND RETAINING WALLS OF CANTILEVER TYPE ON SLOPE OPEN SPACE GREEN JL. KINIBALU BANJARBARU

CERUCUK ◽  
2021 ◽  
Vol 5 (1) ◽  
pp. 69
Author(s):  
Adelina Melati Sukma
Keyword(s):  
Stability Analysis ◽  
Safety Factor ◽  
Carrying Capacity ◽  
Rainy Season ◽  
Open Space ◽  
Retaining Wall ◽  
Retaining Walls ◽  
Stability Calculation ◽  
Overall Stability ◽  
The Stability

On the construction of green open space Jl. Kinibalu Banjarbaru There is a 6 meters tall slope beneath which the river is lined up during the rainy season and makes the slope exposed by water plus the absence of load or traffic on it make the pore figures on the land is large. Therefore, for protection reason, there is a soil alignment in the construction of soil retaining walls. The planned ground retaining wall type is cantilever and gabion. The stability analysis of the ground retaining walls is done manually and with the help of the Geoslope/W 2018 software. The value of the stability of the style against the bolsters, sliding, and carrying capacity of the soil using manual calculations for cantilever type and Netlon qualifies SNI 8460:2017. And for the overall stability calculation using Geoslope/W 2018 software obtained safety factor (SF) > 1.5. From the analysis, the design of planning can be used because it is safe against the dangers of avalanche.

scholarly journals Faktor Keamanan Stabilitas Lereng pada Kondisi Eksisting dan Setelah Diperkuat Dinding Penahan Tanah Tipe Counterfort dengan Program Plaxis

2019 ◽  
Vol 5 (1) ◽  
pp. 1
Author(s):  
Rizki Ramadhan ◽  
Munirwansyah Munirwansyah ◽  
Munira Sungkar
Keyword(s):  
Stability Analysis ◽  
Slope Stability ◽  
Safety Factor ◽  
Slope Failure ◽  
Retaining Wall ◽  
Retaining Walls ◽  
Slope Stability Analysis ◽  
Safety Factors ◽  
Failure Patterns ◽  
Volume Weight

The Aceh Tengah / Gayo Lues-Blangkejeren road segment (N.022) Km 438 + 775 is one of the Central Cross National Roads in the Province of Aceh, which often experiences landslides due to being in hilly areas. Landslides that occur in these locations are caused by scouring of road runoff, lack of optimal drainage and the absence of outlets for drainage and soil layers under asphalt pavement consisting of loose material. Therefore, a slope reinforcement study with Counterfort type retaining wall is needed. This study aims to analyze slope stability by obtaining safety factor numbers and identifying slope failure patterns. Analysis was carried out to obtain safety factors and slope failure patterns by using 2D Plaxis and slice methods. The calculation of safety factors for Counterfort type retaining walls is done manually. The input soil parameters used are dry volume weight (gd), wet volume weight (gw), permeability (k), modulus young (Eref), paisson's ratio (υ), shear angle (f), cohesion (c) . The results of slope stability analysis on the existing conditions using the Plaxis program and the slice method with radius (r) 65.06 meters found that safety factors were 1.038 and 1.079 with unsafe slope conditions (FK <1.25). The results of the analysis after reinforced counterfort and minipile type retaining wall with a length of 12 meters found 1,268 safety factor numbers with unsafe slope conditions (FK <1,5). Thus, additional reinforcement is needed by using anchor on the counterfort. The results of slope stability analysis after reinforced counterfort, minipile and anchor type retaining walls with a length of 20 meters and a slope of 30 ° were obtained with a safety factor number of 1.513 with safe slope conditions (SF> 1.5).ABSTRAKRuas jalan batas Aceh Tengah/Gayo Lues-Blangkejeren (N.022) Km 438+775 merupakan salah satu ruas jalan Nasional Lintas Tengah Provinsi Aceh, yang sering mengalami terjadi tanah longsor karena berada di daerah perbukitan. Longsoran yang terjadi pada lokasi tersebut disebabkan oleh gerusan air limpasan permukaan jalan, kurang optimalnya drainase dan tidak adanya outlet untuk pembuangan air serta lapisan tanah di bawah perkerasan aspal terdiri dari material lepas. Oleh karena itu, diperlukan kajian perkuatan lereng dengan dinding penahan tanah tipe Counterfort. Kajian ini bertujuan untuk menganalisis stabilitas lereng dengan mendapatkan angka faktor keamanan dan mengidentifikasi pola keruntuhan lereng. Analisis dilakukan untuk mendapatkan faktor keamanan dan pola keruntuhan lereng yaitu dengan menggunakan program Plaxis 2D dan metode irisan. Perhitungan faktor keamanan untuk dinding penahan tanah tipe Counterfort dilakukan secara manual. Adapun parameter  tanah input yang digunakan adalah berat volume kering (gd), berat volume basah (gw), permeabilitas (k), modulus young (Eref), paisson’s rasio (υ), sudut geser (f), kohesi (c). Hasil analisis stabilitas lereng pada kondisi eksisting menggunakan program Plaxis dan metode irisan dengan jari-jari (r) 65,06 meter didapatkan akan faktor keamanan sebesar 1,038 dan 1,079 dengan kondisi lereng tidak aman (FK < 1,25). Hasil analisis setelah diperkuat dinding penahan tanah tipe counterfort dan minipile dengan panjang 12 meter didapatkan angka faktor keamanan 1,268 dengan kondisi lereng tidak aman (FK < 1,5). Dengan demikian, maka diperlukan perkuatan tambahan dengan menggunakan angkur pada counterfort. Hasil analisis stabilitas lereng setelah diperkuat dinding penahan tanah tipe counterfort, minipile dan angkur dengan panjang 20 meter serta sudut kemiringan 30° didapatkan angka faktor keamanan 1,513 dengan kondisi lereng aman (SF > 1,5).Kata kunci : longsoran; counterfort; plaxis 2D; faktor keamanan.

Seismic Strengthening Methods and Analysis of Instability of Gravity Retaining Walls

2014 ◽  
Vol 971-973 ◽  
pp. 2141-2146
Author(s):  
Tian Zhong Ma ◽  
Yan Peng Zhu
Keyword(s):  
Safety Factor ◽  
Limit Equilibrium ◽  
Retaining Wall ◽  
Earth Pressure ◽  
Retaining Walls ◽  
Theoretical Formula ◽  
Seismic Strengthening ◽  
Gravity Retaining Wall ◽  
Overturning Stability ◽  
The Stability

Using the frame supporting structure of pre-stressed anchor bolt seismic strengthening technology reinforced the instability of gravity retaining wall. Earth pressure of retaining wall in seismic reinforcement after shall take between active and static earth pressure for the form of the distribution . In this paper, based on the limit equilibrium theory, and the whole stability for retaining walls is analysis, the theoretical formula of the stability safety factor between stability against slope and overturning safety factor is derived. By calculation and comparative analysis with an example, the stability safety factor of gravity retaining wall with introducing this strengthening technology is improved obviously. Keywords: frame anchor structure; seismic strengthening; anti-slip and anti-overturning; stability coefficient;

Study on the Role of Geogrid-Reinforced for Fly Ash Retaining Wall Basing on the Analysis of FLAC3D

2011 ◽  
Vol 368-373 ◽  
pp. 599-603
Author(s):  
Wei Shi ◽  
Jin Han ◽  
Yong Bin Li
Keyword(s):  
Fly Ash ◽  
Safety Factor ◽  
Lateral Displacement ◽  
Retaining Wall ◽  
Vertical Displacement ◽  
Design Parameters ◽  
Finite Element Software ◽  
The Stability ◽  
The Impact

Geogrid-reinforced retaining wall is widely used in civil engineering, the role of geogrid reinforcement and the calculations of reinforcement material in the retaining wall design need further refinement.This paper analyzes the fly ash retaining wall with and without reinforcement by using finite element software of FLAC3D,studys the impact of geogrid-reinforced function on the stability of fly ash retaining wall ,gets the design parameters of geogrid-reinforced fly ash retaining wall.The numerical results show that: the fly ash retaining walls' safety factor is lower when its height is greater than 6m,reinforcement is needed for fly ash retaining wall to improve its safety factor to ensure the stability of retaining wall.Simulate and analyze the 8m high geogrid reinforced fly ash retaining wall,the results show that: increasing the reinforcement spacing can increase the lateral and vertical displacement of geogrid reinforced fly ash retaining wall, the maximum vertical displacement of retaining wall is in the upper wall,maximum lateral displacement occurs in the lower parts of the retaining wall;the reasonable distance of 8m high fly ash retaining wall is 0.8m.

scholarly journals Analisis Stabilitas Dinding Penahan Tipe Kantilever Pada Landfill Tepi TPA Kota Masohi Kabupaten Maluku Tengah Provinsi Maluku

2020 ◽  
Vol 14 (1) ◽  
pp. 70-74
Author(s):  
Erwin Syaiful Wagola ◽  
◽  
Mentari Rasyid ◽  
Keyword(s):  
Safety Factor ◽  
Carrying Capacity ◽  
Retaining Wall ◽  
Retaining Walls ◽  
Safety Factors ◽  
Shear Forces ◽  
Stability Calculation ◽  
Bearing Strength ◽  
Wall Construction ◽  
The Stability

The construction of a retaining wall must be based on a stability calculation and safety factors because errors that occur can be no good. A retaining wall construction can be said to be safe if it is fulfilled. The purpose of this study was to analyze the stability of cantilever type soil retaining walls against shifting, overturning, and soil bearing strength. overturning, and strongly supporting the soil. The method of collecting and collecting data in the field used the field observation method.Wall stability analysis using analytical Finite Element Method based software assistance. The results of data analysis show that the stability of the wall is safe against shear forces, rolling forces and the carrying capacity of the soil with a Safety Factor value of 4.05, 1.50, and 4.67.While the Out Put results from the application also show that the retaining wall at the Masohi City Landfill is still quite safe with a Safety Factor value of 1.80.

scholarly journals Stability Analysis of a High Stone Retaining Wall: A Case of Eskipazar/Turkey

2017 ◽  
Vol 3 (2) ◽  
pp. 26
Author(s):  
İnan Keskin
Keyword(s):  
Stability Analysis ◽  
Slope Stability ◽  
Retaining Wall ◽  
Retaining Walls ◽  
Stone Masonry ◽  
The North ◽  
Index Terms ◽  
Natural Stones ◽  
The Stability ◽  
Very High

Abstract— The use of natural stones in retaining wall has been a tradition and common practice throughout human history. Stone retaining walls are load bearing retaining walls, which have long been analyzed by considering the equilibrium of forces and moments applied to the wall treated as a rigid solid. Stone retaining walls can be designed for the provision of some slope stability. This paper provides a review of stability analysis of high stone retaining walls. This paper provides a review of stability analysis of high stone retaining walls using Geo5 software. The stone retaining wall examined in this study is located in Karabük (Turkey). The study area was located near of the North Anatolian Fault Line (NAF) which are the most important fault lines in Turkey. For that reason, the stability analyzes were carried out considering the earthquake situation. The stone retaining wall is made of traverten type rock. This rock is a commonly observed rock type. The height of the analyzed wall is 10 m. A 5 kPa uniformly distributed load was adopted in the stability analysis to accommodate for the heaviest loading condition during construction. The analysis with Geo5 found a wall factor of safety 1.78. At this value, it shows that the wall will stable although it is very high.   Index Terms— Stone masonry walls, slope stability, Geo5, Turkey

scholarly journals ANALISIS STABILITAS LERENG DENGAN KONTRUKSI DINDING PENAHAN TANAH TIPE COUNTERFORT

2018 ◽  
Vol 1 (2) ◽  
pp. 58-68
Author(s):  
Karsa Ciptaning ◽  
Yuhanis Yunus ◽  
Sofyan M. Saleh
Keyword(s):  
Stability Analysis ◽  
Slope Stability ◽  
Safety Factor ◽  
Retaining Wall ◽  
Slope Angle ◽  
Slope Stability Analysis ◽  
Seismic Load ◽  
Seismic Zone ◽  
The Road ◽  
The Impact

The Babahrot - Blangkejeren road of a segment is one of the most frequently affected by a landslide due to its location in the range of hills in Aceh Province. The road is the only one facilities to connect between both cities, and it is the only one to access for crop trading as well other plantation. The impact of landslide causes disconnection from Gayo Lues to South West Aceh or vice versa. Therefore, it is necessary to study the slope reinforcement at the bottom of the road construction with retaining wall counterfort type.  This study aims to analyze slope stability by obtaining reasonable Safety Factor (SF). The method used is Fellenius Method and combining modeling using the Geoslope software. The Fellenius calculation employed static seismic load. Meanwhile, the Geoslope Program utilized either with or without static seismic load.  The static analysis was carried out based on Indonesian Seismic Zone map (2004) for 50 years (coefficient 0.229). The scope of the analysis was a calculation of slope stability includes calculating slope stability on STA 13 + 885. The result of slope stability analysis on the existing using gdry and gwet with the Geo Slope software both without and by using static seismic load on STA 13+885 is unsafe. Thus, handling the existing is needed. The counterfort of retaining wall is considered to use for alternative slope stability construction. The result of slope stability analysis using Counterfort has safety factor 1,5, if additional handling is done by changing slope angle 20°.

scholarly journals EVALUASI STABILITAS DINDING PENAHAN TANAH TIPE KANTILEVER DI DESA NGROTO, KECAMATAN PUJON, KABUPATEN MALANG

2021 ◽  
Vol 15 (1) ◽  
pp. 22
Author(s):  
Suhudi Suhudi ◽  
Simplisius Ehok
Keyword(s):  
Bearing Capacity ◽  
Water Level ◽  
Safety Factor ◽  
Shear Force ◽  
Rainfall Intensity ◽  
Retaining Wall ◽  
Retaining Walls ◽  
Total Cost ◽  
Normal Water ◽  
The Stability

AbstractWavy topographical conditions with high rainfall intensity cause cantilever type retaining wall on Jalan Brigjen Abdul Manan Wijaya in Ngroto village, Pujon District, Malang Regency, which borders the Konto River avalanche. The stability of the retaining wall can be expressed as Fs (Savety Factor). Factor value the security that is reviewed is the Fs bolster, namely the safety factor against the overthrowing force, the Fs shear is the safety factor against the shear force at the base of the retaining wall, Fs, the bearing capacity of the soil is a factor safety of soil bearing capacity. The purpose of this evaluation is to determine the wall planning cantilever type retaining wall and evaluate the stability of cantilever type retaining wall against the dangers of rolling, shearing, soil bearing capacity and knowing the budget plan for wall planning Cantilever type retaining wall. The result of this evaluation shows the cantilever retaining wall with dimensions H = 7, B = 3.5 Ta = 0.5 Tb = 0.7 D = 1 declared safe with the safety value for normal water level fs slide 1.8> 1.5 (safe), fs roll 2> 1.5 (safe), fs ground bearing capacity 186.8> 4752.86 (safe). Water face flood fs shear 2,6> 1,5 (safe) fs rolling 2,3> 1,5 (safe) fs soil bearing capacity 186.8> 4752.86 (safe). The total cost required for the construction of a cantilever type retaining wall of length 20 m T = 7 width 3.5 m for Rp. 290,570,000.Keywords: Retaining walls, Dimensions, Stability of retaining walls

Sign in / Sign up

Export Citation Format

Share Document