scholarly journals DEEP EUTECTIC SOLVENTS AS AN ADDITIVE IN MODIFICATION OF MEMBRANEFOR NANO- AND ULTRA- FILTRATION: PHYSIC-CHEMISTRY CHARACTERISTICS, FTIR STUDY AND ELECTROCHEMICAL BEHAVIOR

Author(s):  
Viktoria Vorobyova ◽  
Margarita Skiba

Deep eutectic solvents (DESs) are a new class of solvents that can offset some of the primary drawbacks of typical solvents and ionic liquids. They are synthesized by simply mixing the components that interact with each other through hydrogen bonds, and form a eutectic mixture with a melting point much lower than each component individually. Deep eutectic solvents is usually liquid at temperatures below 100 °C. Thanks to these great advantages, deep eutectic solvents is attracting more and more attention in many areas of research. Very recently, great attention has been paid to new pioneering attempts aiming at deep eutectic solvents into the field of chemical engineering, including membrane science and technology. Even if just a same works have been currently reported in applying deep eutectic solvents in membranes, the consideration on this new type of solvents is continuously growing. New deep eutectic solvents based on choline chloride (ChCl)–lactic acid (1:2 M ratio) was obtained and its electrochemical characteristics was studied. The synthesis of deep eutectic solvents was confirmed by FA nuclear magnetic resonance (NMR) spectrometry method. FTIR study provided further details into hydrogen bonding upon mixing. FTIR results confirmed that H-bonds, occurring between two components in deep eutectic solvents, were the main force leading to the eutectic formation. The frequency at 3221 cm−1 can be attributed to the oscillations of the O-H bond in the formation of OH-Cl-ChCl. The main physicochemical characteristics of deep eutectic solutions (density, pH) are determined. The electrochemical behavior was investigated of choline chloride (ChCl)–lactic acid deep eutectic solvent (DES) by cyclic voltammetry. The method of cyclic voltammetry found that the oxidation of deep eutectic solvents is fixed at a potential of Ea1 = 0.54 V.

BioResources ◽  
2017 ◽  
Vol 12 (4) ◽  
pp. 7301-7310
Author(s):  
Veronika Majová ◽  
Silvia Horanová ◽  
Andrea Škulcová ◽  
Jozef Šima ◽  
Michal Jablonský

This study aimed to resolve the issue of the lack of detailed understanding of the effect of initial lignin content in hardwood kraft pulps on pulp delignification by deep eutectic solvents. The authors used Kappa number of the concerned pulp, intrinsic viscosity, and selectivity and efficiency of delignification as the parameters of the effect. The pulp (50 g oven dry pulp) was treated with four different DESs systems based on choline chloride with lactic acid (1:9), oxalic acid (1:1), malic acid (1:1), and system alanine:lactic acid (1:9); the results were compared to those reached by oxygen delignification. The results showed that the pulp with a higher initial lignin content had a greater fraction of easily removed lignin fragments.


Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2149
Author(s):  
Chan-Woo Park ◽  
Song-Yi Han ◽  
Rajkumar Bandi ◽  
Ramakrishna Dadigala ◽  
Eun-Ah Lee ◽  
...  

In this study, the effect of lignin esterification with fatty acid chloride on the properties of lignin and lignin/poly(lactic acid) (PLA) composites was investigated. Lignocellulose (Pinus densiflora S. et Z.) was treated using a deep eutectic solvent (DES) with choline chloride (ChCl)/lactic acid (LA). From the DES-soluble fraction, DES-lignin (DL) was isolated by a regeneration process. Lignin esterification was conducted with palmitoyl chloride (PC). As the PC loading increased for DL esterification, the Mw of esterified DL (EDL) was increased, and the glass transition temperature (Tg) was decreased. In DL or EDL/PLA composite films, it was observed that EDL/PLA had cleaner and smoother morphological characteristics than DL/PLA. The addition of DL or EDL in a PLA matrix resulted in a deterioration of tensile properties as compared with neat PLA. The EDL/PLA composite film had a higher tensile strength and elastic modulus than the DL/PLA composite film. DL esterification decreased water absorption with lower water diffusion coefficients. The effect of lignin esterification on improving the compatibility of lignin and PLA was demonstrated. These results are expected to contribute to the development of high-strength lignin composites.


2021 ◽  
Vol 23 (3) ◽  
pp. 1300-1311 ◽  
Author(s):  
Dasom Jung ◽  
Jae Back Jung ◽  
Seulgi Kang ◽  
Ke Li ◽  
Inseon Hwang ◽  
...  

The in vitro and in vivo studies suggest that choline chloride-based deep eutectic solvents may not be considered as pure, safe mixtures even if they consist of safe compounds.


2020 ◽  
Vol 32 (4) ◽  
pp. 733-738 ◽  
Author(s):  
R. Manurung ◽  
Taslim ◽  
A.G.A. Siregar

Deep eutectic solvents (DESs) have numerous potential applications as cosolvents. In this study, use of DES as organic solvents for enzymatic biodiesel production from degumming palm oil (DPO) was investigated. Deep eutectic solvent was synthesized using choline chloride salt (ChCl) compounds with glycerol and 1,2-propanediol. Deep eutectic solvent was characterized by viscosity, density, pH and freezing values, which were tested for effectiveness by enzymatic reactions for the production of palm biodiesel with raw materials DPO. Deep eutectic solvent of ChCl and glycerol produced the highest biodiesel yield (98.98%); weight of DES was only 0.5 % of that of the oil. In addition, the use of DES maintained the activity and stability of novozym enzymes, which was assessed as the yield until the 6th usage, which was 95.07 % biodiesel yield compared with the yield without using DES. Hence, using DES, glycerol in enzymatic biodiesel production had high potentiality as an organic solvent for palm oil biodiesel production


2019 ◽  
Vol 295 ◽  
pp. 550-557 ◽  
Author(s):  
Xiaozhou Cao ◽  
Lulu Xu ◽  
Yuanyuan Shi ◽  
Yaowu Wang ◽  
Xiangxin Xue

2020 ◽  
Vol 75 (3) ◽  
pp. 269-279
Author(s):  
Mohammad Hosein Sayahi ◽  
Maryam Gorjizadeh ◽  
Melan Meheiseni ◽  
Soheil Sayyahi

AbstractAn effective method based on choline chloride (ChCl)-oxalic acid (Ox) deep eutectic solvent was proposed for the synthesis of 4-azaphenanthrene-3,10-dione, 1,8-dioxo-octahydroxanthene and tetrahydrobenzo[b]pyran derivatives. The eutectic mixture worked as both the solvent and acidic catalyst for conversion. The impacts of different variables, including the composition and volume of ChCl-Ox, and temperature, on reaction yield were studied for optimization. The crucial advantages of this process are simplicity of the experimental procedure, high yields, short reaction times, high recyclability, and the use of safe and inexpensive components.


Environments ◽  
2020 ◽  
Vol 7 (11) ◽  
pp. 97
Author(s):  
Chiau Yuan Lim ◽  
Mohd Faridzuan Majid ◽  
Sarrthesvaarni Rajasuriyan ◽  
Hayyiratul Fatimah Mohd Zaid ◽  
Khairulazhar Jumbri ◽  
...  

Extractive catalytic oxidative desulfurization (ECODS) is the one of the recent methods used in fuel desulfurization which involved the use of catalyst in the oxidative desulfurization of diesel fuel. This study is aimed to test the effectiveness of synthesized choline chloride (ChCl) based deep eutectic solvent (DES) in fuel desulfurization via ECODS method, with the presence of graphene oxide (GO) as catalyst and hydrogen peroxide (H2O2) as oxidant. In this study, 16 DESs based on choline chloride were synthesized using glycerol (GLY), ethylene glycol (EG), tetraethylene glycol (TEG) and polyethylene glycol (PEG). The characterization of the synthesized DES was carried out via Fourier transform infrared spectroscopy (FTIR) analysis, density, and viscosity determination. According to the screening result, ChCl-PEG (1:4) was found to be the most effective DES for desulfurization using ECODS method, with a removal of up to 47.4% of sulfur containing compounds in model oil in just 10 min per cycle after the optimization of the reaction parameters, and up to 95% desulfurization efficiency could be achieved by six cycles of desulfurization. It is found that the addition of GO as catalyst does not increase the desulfurization performance drastically; hence, future studies for the desulfurization performance of DESs made up from ChCl and PEG and its derivatives can be done simply by using extraction desulfurization (EDS) method instead of ECODS method, for cost reduction purpose and easier regulation of DES waste into environment.


2016 ◽  
Vol 18 (3) ◽  
pp. 826-833 ◽  
Author(s):  
Xavier Marset ◽  
Juana M. Pérez ◽  
Diego J. Ramón

The synthesis of different tetrahydroisoquinolines using choline chloride : ethylene glycol as a deep eutectic solvent (DES) and copper(ii) oxide impregnated on magnetite as a catalyst has been accomplished successfully.


2019 ◽  
Vol 21 (31) ◽  
pp. 17200-17208 ◽  
Author(s):  
Dhawal Shah ◽  
Ulan Mansurov ◽  
Farouq S. Mjalli

Intermolecular interactions within the mixtures of DMSO and reline, a typical type III Deep Eutectic Solvent (DES), composed of urea and choline chloride, is examined along with the mixtures' physical properties.


Sign in / Sign up

Export Citation Format

Share Document