scholarly journals Interfacial and Bending Properties by Adding HNTs on the Aramid/Basalt Reinforced Epoxy-Based Hybrid Composites

2017 ◽  
Author(s):  
Jin-Woo LEE ◽  
Tianyu Yu ◽  
Chang-Wook Park ◽  
Yun-Hae Kim
Keyword(s):  
Mechanical Properties ◽  
Bending Strength ◽  
Hybrid Composites ◽  
Basalt Fiber ◽  
Fiber Reinforced ◽  
Hybrid Fiber ◽  
Reinforced Composite ◽  
External Impact ◽  
Laminar Fracture ◽  
Hybrid Properties

Hybrid fiber reinforced composites can be controlled by price, weight and various mechanical properties depending on fiber ratio and lamination method. Despite these excellent hybrid properties, there is a disadvantage that inter-laminar fracture due to external impact, which is the biggest weakness of fiber reinforced composite materials, is weak. The test specimens were prepared by using a vacuum bag method, which is manufactured by using an autoclave device. The pre-preg is manufactured in the form of a B-stage. In the process of fabricating the nanoparticle pre-preg, the homogeneizer using an ultrasonic wave was used to disperse the epoxy subject without the curing agent into nanoparticles. The dispersion of the nanoparticles was dispersed by the weight of the epoxy resin. This is to take into account the cohesion of HNT and to understand the range of cohesion of HNT in a matrix with viscosity and its phenomenon. According to the Comparison of the interlayer interfacial properties and mechanical properties of Aramid / Basalt fiber hybrid composites by HNT addition, the fracture toughness, ILSS and bending strength of specimens with HNT content of more than a certain level were decreased because of the aggregation of HNT.

Hybridization effect on mechanical properties of short basalt/jute fiber-reinforced polyester composites

2013 ◽  
Vol 20 (4) ◽  
pp. 343-350 ◽  
Author(s):  
Pandian Amuthakkannan ◽  
Vairavan Manikandan ◽  
Jebbas Thangaiah Winowlin Jappes ◽  
Marimuthu Uthayakumar
Keyword(s):  
Mechanical Properties ◽  
Impact Strength ◽  
Hybrid Composites ◽  
Fiber Composite ◽  
Testing Machine ◽  
Basalt Fiber ◽  
Jute Fiber ◽  
Computer Assisted ◽  
Fiber Reinforced ◽  
Polyester Composites

AbstractMechanical properties of fiber reinforcement that can be obtained by the introduction of basalt fibers in jute fiber-reinforced polyester composites have been analyzed experimentally. Basalt/jute fiber-reinforced hybrid polymer composites were fabricated with a varying fiber percentage by using compression molding techniques. The fabricated composite plates were subjected to mechanical testing to estimate tensile strength, flexural strength and impact strength of the composites. The effect of fiber content on basalt/jute fiber in the composites has been studied. Addition of jute fiber into basalt fiber composite makes it a cost-effective one. Incorporation of basalt fiber into the composites was at approximately 10%, 20%, up to 90%, and the jute fiber percentage was reduced from 90%, 80%, to 10% correspondingly. Mechanical properties were investigated as per ASTM standards. Tensile and flexural strengths were tested by using a computer-assisted universal testing machine, and impact strength by using an Izod impact tester. It has been observed that the addition of jute fiber to the basalt fiber polyester composites enhanced the mechanical properties. Water absorption of hybrid composites was also analyzed and was found to be proportional to fiber percentage.

Experimental Investigation on Mechanical Properties of Hemp-Banana-Glass Fiber Reinforced Composites

2015 ◽  
Vol 766-767 ◽  
pp. 167-172 ◽  
Author(s):  
R. Bhoopathi ◽  
C. Deepa ◽  
G. Sasikala ◽  
M. Ramesh
Keyword(s):  
Mechanical Properties ◽  
Composite Materials ◽  
Hybrid Composites ◽  
Glass Fibers ◽  
Sem Analysis ◽  
Synthetic Fiber ◽  
Fiber Reinforced ◽  
Fiber Failure ◽  
Morphological Studies ◽  
Reinforced Composite

Due to desirable properties and its role of natural and manmade fibers reinforced composite materials are growing in a faster rate in the field of engineering and technology. Now-a-days the treated natural composites are serves better in terms of corrosive resistance, and other desirable properties when compared to the traditional materials. The main aim of this experimental study is to fabricate and investigate the mechanical properties such as tensile strengths, flexural strengths and impact strengths of NaOH treated and hemp-banana-glass fibers reinforced hybrid composites. From the experimental results, it has been noted that the treated hemp-banana-glass fibers reinforced hybrid epoxy composites exhibited superior properties and used as an alternate material for synthetic fiber reinforced composite materials. Morphological studies are carried out to analyze the interfacial characteristics, internal structures, fiber failure mode and fractured surfaces by using scanning electron microscopy (SEM) analysis.

scholarly journals Hybrid fiber-reinforced composite with carbon, glass, basalt, and para-aramid fibers for light use applications

2021 ◽  
Author(s):  
Jinwon Cho ◽  
Jaehyeung Park
Keyword(s):  
Carbon Fibers ◽  
Hybrid Composite ◽  
Mechanical Performance ◽  
Hybrid Composites ◽  
Glass Fibers ◽  
Fiber Reinforced ◽  
Hybrid Fiber ◽  
Thermoplastic Matrix ◽  
Reinforced Composite ◽  
Carbon Fiber Reinforced Composites

Abstract This study explores the possibility of incorporating carbon fibers (CFs), basalt fibers, glass fibers, and p-aramid reinforcement fibers into carbon fiber–reinforced composites for light use applications. Hybrid composites can overcome the weakness of CFs and provide flexibility to design materials with the desired properties. The mechanical properties (tensile, flexural, and puncture impact properties) of the prepared hybrid composite were evaluated according to the standards ASTM D3039, ASTM D790, and ISO 6603-2, respectively. The inherent properties of reinforcement fibers, weaving density, and impregnation of a thermoplastic matrix into the composite considerably impact the mechanical performance of the hybrid composite materials.

scholarly journals Mechanical Properties and Design of Concrete with Hybrid Steel and Basalt Fiber

2021 ◽  
Vol 264 ◽  
pp. 02030
Author(s):  
Leonid Dvorkin ◽  
Oleh Bordiuzhenko ◽  
Vadim Zhitkovsky ◽  
Svyatoslav Gomon ◽  
Sviatoslav Homon
Keyword(s):  
Mechanical Properties ◽  
Reinforced Concrete ◽  
Concrete Strength ◽  
Basalt Fiber ◽  
Fiber Reinforcement ◽  
Fiber Reinforced Concrete ◽  
Fiber Types ◽  
Fiber Reinforced ◽  
Hybrid Fiber ◽  
Fine Grained

Adding different fiber types may yield improvement of steel fiber reinforced concrete (SFRC) features. Therefore, the investigation of hybrid fiber reinforced concrete (HFRC) mechanical properties is relevant. The effect of adding hybrid steel and basalt fiber on the mechanical properties of fine-grained concrete is studied. It is shown that hybrid fiber reinforcement using optimal steel and basalt fiber ratio allows preventing concrete mixtures' segregation and improving their structure homogeneity. This, in turn, allows achieving higher concrete strength values. In most cases, the design of such concrete compositions is based on engineering experience that limits the designers' capabilities. Therefore, an effective methodology for proper HFRC composition design should be developed. The present study is focused on developing such a methodology. The developed methodology includes using the mathematical experiments planning method to design optimal composition of high-strength fine-grained fiber reinforced concrete with hybrid steel and basalt fiber reinforcement. It is demonstrated that the proposed method can be effectively used for the design of optimal compositions of HFRC.

scholarly journals Optimization and Static Stress Analysis of Hybrid Fiber Reinforced Composite Leaf Spring

2015 ◽  
Vol 2015 ◽  
pp. 1-13 ◽  
Author(s):  
Luay Muhammed Ali Ismaeel
Keyword(s):  
Hybrid Composites ◽  
Weight Ratio ◽  
High Strength ◽  
Leaf Spring ◽  
Fiber Reinforced ◽  
Hybrid Fiber ◽  
Element Analysis ◽  
Shear Moduli ◽  
Good Convergence ◽  
Reinforced Composite

A monofiber reinforced composite leaf spring is proposed as an alternative to the typical steel one as it is characterized by high strength-to-weight ratio. Different reinforcing schemes are suggested to fabricate the leaf spring. The composite and the typical steel leaf springs are subjected to the same working conditions. A weight saving of about more than 60% can be achieved while maintaining the strength for the structures under consideration. The objective of the present study was to replace material for leaf spring. This study suggests various materials of hybrid fiber reinforced plastics (HFRP). Also the effects of shear moduli of the fibers, matrices, and the composites on the composites performance and responses are discussed. The results and behaviors of each are compared with each other and verified by comparison with analytical solution; a good convergence is found between them. The elastic properties of the hybrid composites are calculated using rules of mixtures and Halpin-Tsi equation through the software of MATLAB v-7. The problem is also analyzed by the technique of finite element analysis (FEA) through the software of ANSYS v-14. An element modeling was done for every leaf with eight-node 3D brick element (SOLID185 3D 8-Node Structural Solid).

scholarly journals Mechanical and Dynamic Properties of Hybrid Fiber Reinforced Fly-Ash Concrete

2021 ◽  
Vol 2021 ◽  
pp. 1-15
Author(s):  
Dan-Yang Su ◽  
Jian-Yong Pang ◽  
Xiao-Wen Huang
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Fly Ash ◽  
Dynamic Compression ◽  
Basalt Fiber ◽  
Splitting Tensile Strength ◽  
Fiber Reinforced ◽  
Hybrid Fiber ◽  
Fly Ash Concrete

In order to explore the influence of basalt-polypropylene hybrid fiber on the static mechanical properties and dynamic compression properties of fly-ash concrete, 16 groups of basalt-polypropylene hybrid fiber fly-ash concrete (HBPC) and 1 group of benchmark concrete were designed and prepared. The slump, static compressive strength, static splitting tensile strength, and dynamic compressive performance tests were tested. At the same time, the mechanism of the mechanical properties of hybrid fiber reinforced fly-ash concrete was analyzed by means of scanning electron microscopy (SEM). The results show that the failure of the benchmark concrete is mainly brittle failure. Compared with the benchmark concrete, the static compressive strength and splitting tensile strength of HBPC are significantly enhanced. Basalt-polypropylene hybrid fiber, polypropylene fiber, and basalt fiber, are extremely significant factors affecting the slump, static compressive strength, and static splitting tensile strength of HBPC, respectively. The peak stress of the benchmark concrete and HBPC increases with the increase of the loading air pressure, showing a certain strain rate effect. SEM shows that the fibers have good dispersibility in the concrete and good adhesion with the concrete matrix interface, but excessive fibers will cause fiber agglomeration, which increases the internal defects of HBPC.

Effect of Halloysite Nanotubes on Physico-Mechanical Properties of Silk/Basalt Fabric Reinforced Epoxy Composites

2022 ◽  
Vol 1048 ◽  
pp. 21-32
Author(s):  
S.M. Darshan ◽  
Bheemappa Suresha
Keyword(s):  
Mechanical Properties ◽  
Impact Strength ◽  
Natural Fiber ◽  
Environmental Concern ◽  
Hybrid Composites ◽  
Basalt Fiber ◽  
Halloysite Nanotubes ◽  
Fiber Reinforced ◽  
Structural Applications ◽  
The Impact

Natural fiber reinforced polymer composites have become more attractive due to their high specific strength, light weight and environmental concern. However, some limitations such as low modulus and poor moisture resistance were reported. This paper presents the role of halloysite nanotubes (HNTs) on physico-mechanical properties of bidirectional silk and basalt fiber reinforced epoxy (SF-BF/Ep) hybrid composites. Vacuum bagging and ultra-sonication method were used for the fabrication of hybrid composite slabs. The effect of HNT loadings (1.5, 3 and 4.5 wt. %) on physico-mechanical characteristics like density, hardness, flexural and impact properties of SF-BF/Ep composites were determined according to ASTM standards. Experimental results revealed that the incorporation of HNTs improves the mechanical properties. The impact strength of SF-BF/Ep is predominant at 3 wt. % HNT loading where the impact strength surges to 568.67 J/m, which may render HNT filled SF-BF/Ep desirable for various toughness-critical structural applications. The test results demonstrated that SF-BF/Ep-3HNT coded composites exhibited improved mechanical properties among the all composites.

Sign in / Sign up

Export Citation Format

Share Document