scholarly journals Strain Rate Sensitivity of the Additive Manufacturing Material Scalmalloy®

2021 ◽  
Author(s):  
Puneeth Jakkula ◽  
Georg Ganzenmüller ◽  
Florian Gutmann ◽  
Aron Pfaff ◽  
Jörg Mermagen ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Strain Rate ◽  
Yield Stress ◽  
Strain Rate Sensitivity ◽  
Mass Density ◽  
Rate Sensitivity ◽  
Heat Treating ◽  
Tensile Tests ◽  
Strain Rates ◽  
Interesting Candidate

This work investigates the influence of strain rate on the stress/strain behaviour of Scalmalloy. This material is an aluminium-scandium-magnesium alloy, specifically developed for additive manufacturing. The bulk yield stress of the material processed by Selective Laser Melting is approximately 340 MPa which can be increased by heat-treating to approximately 530 MPa. These numbers, combined with the low mass density of 2.7 g/cm3, make Scalmalloy an interesting candidate for lightweight crash-absorbing structures. As this application is inherently dynamic, it is of interest to study the loading rate sensitivity, which is difficult to predict: Al-Sc alloys exhibit classic strain rate sensitivity with an increased yield stress at elevated strain rates. However, Al-Mg alloys are known to show the contrary effect, they exhibit less strength as strain rate is increased. To answer the question how these effects combine, we study the dynamic behaviour at four different strain rates ranging from 10−3 /s to 1000 /s using servo-hydraulic and Split-Hopkinson testing methods. The resulting data is analysed in terms of strain rate sensitivity of tensile strength and failure strain. A constitutive model based on a simplified Johnson-Cook approach is employed to simulate the tensile tests and provides good agreement with the experimental observations.

scholarly journals Strain Rate Sensitivity of the Additive Manufacturing Material Scalmalloy®

2021 ◽  
Author(s):  
P. Jakkula ◽  
G. Ganzenmüller ◽  
F. Gutmann ◽  
A. Pfaff ◽  
J. Mermagen ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Strain Rate ◽  
Yield Stress ◽  
Strain Rate Sensitivity ◽  
Mass Density ◽  
Rate Sensitivity ◽  
Heat Treating ◽  
Tensile Tests ◽  
Strain Rates ◽  
Interesting Candidate

AbstractThis work investigates the influence of strain rate on the stress/strain behaviour of Scalmalloy. This material is an aluminium–scandium–magnesium alloy, specifically developed for additive manufacturing. The bulk yield stress of the material processed by Selective Laser Melting is approximately 340 MPa which can be increased by heat-treating to approximately 530 MPa. These numbers, combined with the low mass density of 2.7 g/cm3, make Scalmalloy an interesting candidate for lightweight crash-absorbing structures. As this application is inherently dynamic, it is of interest to study the loading rate sensitivity, which is difficult to predict: Al–Sc alloys exhibit classic strain rate sensitivity with an increased yield stress at elevated strain rates. However, Al–Mg alloys are known to show the contrary effect, they exhibit less strength as strain rate is increased. To answer the question how these effects combine, we study the dynamic behaviour at four different strain rates ranging from 10−3 to 1000 /s using servo-hydraulic and split-Hopkinson testing methods. The resulting data is analysed in terms of strain rate sensitivity of tensile strength and failure strain. A constitutive model based on a simplified Johnson–Cook approach is employed to simulate the tensile tests and provides good agreement with the experimental observations.

Hot Deformation Behaviour of Low Alloyed Steel

2012 ◽  
Vol 706-709 ◽  
pp. 2794-2799 ◽  
Author(s):  
Cecilia Poletti ◽  
S. Großeiber ◽  
Sergiu Ilie ◽  
Hans Peter Degischer
Keyword(s):  
Strain Rate ◽  
Strain Rate Sensitivity ◽  
Hot Deformation ◽  
Power Efficiency ◽  
Deformation Behaviour ◽  
Rate Sensitivity ◽  
Tensile Tests ◽  
Alloyed Steel ◽  
Strain Rates ◽  
Low Alloyed Steel

Hot deformation of a continuously cast low alloyed steel is studied by means of hot compression and tensile tests carried out after austenitization between 700–790 °C at 3x10-4– 0.3 s-1of strain rate. The ferrite transformation at the applied cooling rate was determined at 710°C by means of dilatometry. The compressive flow data obtained by using a Gleeble®1500 machine are evaluated to obtain the strain rate sensitivity and the processing maps using different models. The tensile data are used to determine the ductility of the material with different deformation parameters. A new calculation method is used for the instability parameter derived from the dynamic materials model. The strain rate sensitivity does not predict any instability but all the others instability parameters do, including the new one. Pores are formed at the prior austenitic grain boundaries at low strain rates, causing a decay of ductility in the tensile samples. A minimum in the ductility was observed for low strain rates at 750°C. Low strain rates and low temperatures increase the formation of more ferrite than without deformation at the corresponding heat treatments without deformation. In these conditions, the deformation is concentrated in the softer ferrite phase. Low power efficiency was calculated at high strain rates, where no dynamic recrystallization takes place. The domains with similar efficiency of power dissipation are correlated to deformation induced ferrite formation and ferrite recovery. These domains vary with the increasing strain.

scholarly journals Print Velocity Effects on Strain-Rate Sensitivity of Acrylonitrile-Butadiene-Styrene Using Material Extrusion Additive Manufacturing

Polymers ◽  
2021 ◽  
Vol 13 (1) ◽  
pp. 149
Author(s):  
Wilco M. H. Verbeeten ◽  
Rob J. Arnold-Bik ◽  
Miriam Lorenzo-Bañuelos
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Strain Rate ◽  
Yield Stress ◽  
Strain Rate Sensitivity ◽  
Molecular Orientation ◽  
Activation Volume ◽  
Rate Sensitivity ◽  
Acrylonitrile Butadiene Styrene ◽  
Butadiene Styrene

The strain-rate sensitivity of the yield stress for Acrylonitrile-Butadiene-Styrene (ABS) tensile samples processed via material extrusion additive manufacturing (ME-AM) was investigated. Such specimens show molecular orientation and interstitial voids that affect the mechanical properties. Apparent densities were measured to compensate for the interstitial voids. Three different printing speeds were used to generate ME-AM tensile test samples with different molecular orientation. Printing velocities influenced molecular orientation and stretch, as determined from thermal shrinkage measurements. Likewise, infill velocity affected the strain-rate dependence of the yield stress. The ABS material manifests thermorheollogically simple behavior that can correctly be described by an Eyring flow rule. The changing activation volume, as a result of a varying print velocity, scales linearly with the molecular orientation, as captured in an estimated processing-induced pre-strain. Therefore, it is suggested that ME-AM processed ABS shows a deformation-dependent activation volume. This paper can be seen as initial work that can help to improve quantitative predictive numerical tools for ME-AM, taking into account the effects that the processing step has on the mechanical properties.

scholarly journals Strain rate sensitivity of the aluminium-magnesium-scandium alloy - Scalmalloy®

2021 ◽  
Vol 250 ◽  
pp. 05014
Author(s):  
Puneeth Jakkula ◽  
Georg Ganzenmüller ◽  
Florian Gutmann ◽  
Stefan Hiermaier
Keyword(s):  
Strain Rate ◽  
Strain Rate Sensitivity ◽  
Testing Machine ◽  
Rate Sensitivity ◽  
Tensile Tests ◽  
Image Correlation ◽  
Strain Rates ◽  
Rate Dependency ◽  
Strain Rate Dependency ◽  
Scandium Alloy

This work investigates the strain rate sensitivity of the aluminiummagnesium-scandium alloy Scalmalloy, which is used extensively for additive manufacturing of lightweight structures. This high strength aluminium alloy combines very good weldability, machinability and mechanical strength: it can be heat-treated to reach nominal ultimate tensile strengths in excess of 500 MPa. We report tensile tests at strain rates ranging from 10−3 /s to 103 /s at room temperature. It is well known that Al-Mg alloys exhibit a negative strain rate dependency in combination with serrated flow caused by the Portevin-Le Chatelier effect, which describes the interaction of Mg solutes with dislocation propagations. In contrast, in Al-Sc alloys, the flow stress increases with increasing strain rate and displays positive strain rate dependency. Additionally, the presence of Sc in the form of Al3-Sc provides a fine-grained microstructure which allows higher tensile and fatigue strength. This research shows how these combined effects interact in the case of Scalmalloy, which contains both Mg and Sc. Tests are performed at quasi-static, intermediate and high strain rates with a servohydraulic testing machine and a Split-Hopkinson tension bar. Local specimen strain was performed using 2D Digital Image Correlation.

scholarly journals Experimental study of the stress state and strain rate dependent mechanical behaviour of TRIP-assisted steels

2021 ◽  
Vol 250 ◽  
pp. 05003
Author(s):  
A. Pontillo ◽  
C. Lonardi ◽  
S. Chandran ◽  
F. Vercruysse ◽  
L. Corallo ◽  
...  
Keyword(s):  
Strain Rate ◽  
Plane Strain ◽  
Strain Rate Sensitivity ◽  
Rate Sensitivity ◽  
Tensile Tests ◽  
Image Correlation ◽  
Strain Rates ◽  
Plane Shear ◽  
Rate Dependent ◽  
Stress States

This paper presents an investigation into the effect of different stress states and strain rates on the austenite-to-martensite transformation during plastic straining of a Q&P steel. Different stress states are imposed to the steel using purposed-designed samples. The sample geometries, including in-plane shear, dogbone and plane strain samples, are optimised by finite element modelling. Tensile tests are performed at different strain rates of 0.001 s-1, 10 s-1 and 500 s-1. Digital image correlation is used to capture the strain fields during the entire deformation process. The mechanical results indicate a positive strain rate sensitivity for both the shear and plane strain specimens and a negative strain rate sensitivity for the dogbone sample. In addition, the influence of the strain rate on the strain level is more pronounced for the shear than for the plane strain specimens and for the dogbone samples.

scholarly journals A New Explanation for the Effect of Dynamic Strain Aging on Negative Strain Rate Sensitivity in Fe–30Mn–9Al–1C Steel

Materials ◽  
2019 ◽  
Vol 12 (20) ◽  
pp. 3426 ◽  
Author(s):  
Jia Xing ◽  
Lifeng Hou ◽  
Huayun Du ◽  
Baosheng Liu ◽  
Yinghui Wei
Keyword(s):  
Strain Rate ◽  
Strain Rate Sensitivity ◽  
Dynamic Strain Aging ◽  
Strain Aging ◽  
Rate Sensitivity ◽  
Tensile Tests ◽  
Dynamic Strain ◽  
Strain Rates ◽  
Dislocation Arrangement ◽  
Hall Plot

In this study, the evolution of the mechanical properties of Fe–30Mn–9Al–1C steel has been determined in tensile tests at strain rates of 10−4 to 102 s−1. The results show that the strain rate sensitivity becomes a negative value when the strain rate exceeds 100 s−1 and this abnormal evolution is attributed to the occurrence of dynamic strain aging. Due to the presence of intergranular κ-carbides, the fracture modes of steel include ductile fracture and intergranular fracture. The values of dislocation arrangement parameter M were obtained using a modified Williamson–Hall plot. It has been found that once the strain rate sensitivity becomes negative, the interaction of dislocations in the steel is weakened and the free movement of dislocation is enhanced. Adiabatic heating promotes the dynamic recovery of steel at a high strain rate.

Local Investigations of the Mechanical Properties of Ultrafine Grained Metals by Nanoindentations

2006 ◽  
Vol 503-504 ◽  
pp. 31-36 ◽  
Author(s):  
Johannes Mueller ◽  
Karsten Durst ◽  
Dorothea Amberger ◽  
Matthias Göken
Keyword(s):  
Mechanical Properties ◽  
Strain Rate ◽  
Strain Rate Sensitivity ◽  
Room Temperature ◽  
Rate Sensitivity ◽  
Strain Rates ◽  
Fcc Metals ◽  
Angular Pressing ◽  
Ultrafine Grained ◽  
Indentation Strain

The mechanical properties of ultrafine-grained metals processed by equal channel angular pressing is investigated by nanoindentations in comparison with measurements on nanocrystalline nickel with a grain size between 20 and 400 nm produced by pulsed electrodeposition. Besides hardness and Young’s modulus measurements, the nanoindentation method allows also controlled experiments on the strain rate sensitivity, which are discussed in detail in this paper. Nanoindentation measurements can be performed at indentation strain rates between 10-3 s-1 and 0.1 s-1. Nanocrystalline and ultrafine-grained fcc metals as Al and Ni show a significant strain rate sensitivity at room temperature in comparison with conventional grain sized materials. In ultrafine-grained bcc Fe the strain rate sensitivity does not change significantly after severe plastic deformation. Inelastic effects are found during repeated unloading-loading experiments in nanoindentations.

Strain Rate Sensitivity of Mixed SAC-SnBi Solder Joints

2019 ◽  
Vol 2019 (1) ◽  
pp. 000480-000487
Author(s):  
Luke A. Wentlent ◽  
James Wilcox ◽  
Xuanyi Ding
Keyword(s):  
Melting Point ◽  
Strain Rate ◽  
Strain Rate Sensitivity ◽  
Solder Joints ◽  
Volume Ratio ◽  
Rate Sensitivity ◽  
Thermal Exposure ◽  
Fracture Mechanisms ◽  
Eutectic System ◽  
Strain Rates

Abstract As the electronics industry continues to evolve a concerted effort has developed to implement lower melting point solders. The ability to minimize the thermal exposure that an assembly is subjected to affords significant benefits with respect to both the reliability and the materials that can be used. One of the most popular low melt solder alloys currently being investigated by the industry is the Bi-Sn eutectic system, which has a melting point of 139°C. The BiSn system itself is not particularly novel as it was posited as a SAC alternative during the initial shift from Pb based solders. While a body of knowledge currently exists regarding this system, and the near eutectic variant BiSnAg, there are still concerns regarding its ductility, especially as a function of thermal exposure and strain rate. Bismuth is widely acknowledged as a brittle element and its presence in such quantities raises concerns of not just Cu6Sn5 embrittlement but also solder fragility in high strain rate types of environments. A challenge with regards to near term implementation is that most packages are not available with BiSn solder bumps. Therefore, it will be necessary to use components already balled with SAC 305 solder. This means that the resulting solder interconnect, reflowed below conventional SAC reflow temperatures, will form a type of mixed hybrid microstructure. This non-equilibrium microstructure will be composed of two regions, one Bi-rich region which is well past saturation and a second region which is Bi-deficient. It is of specific industrial interest then to not just investigate the BiSn solder system but also within the context of a realistic mixed interconnect. Recent work by several researchers has shown that this hybrid microstructure is unstable and quite active with respect to the movement and localized concentration of the Bismuth. The degree of mixing of these two regions has been shown to be highly dependent upon reflow temperature and the paste to ball volume ratio. Mixed SAC-BiSn solder joints were formed by placing SAC 305 spheres on BiSn paste deposits for a paste to ball volume ratio of .18. These samples were then reflowed at either 175°C or 200°C. SAC 305 control samples were also made using a conventional Pb-free reflow profile with a peak temperature of 247°C. A 22 mil Cu-OSP pad on a 1.0 mm thick FR4 substrate was used for all samples. A selection of the solder joints were then isothermally aged at 90°C for 200 hours. Using a joint level micromechanical tester, ball shear tests were conducted at a range of strain rates for samples in the as-reflowed and aged state. Using this information, the strain rate sensitivity of the interconnects was mapped and correlated with the observed failure modes. Investigations into the fracture mechanisms were conducted by examining the shear fracture surface with optical and scanning electron microscopy. Additionally, the evolution of the microstructure was characterized. Results showed a clear transition from ductile solder failure to a brittle separation failure at the higher strain rates.

scholarly journals Strain-Rate-Dependent Deformation Behavior and Mechanical Properties of a Multi-Phase Medium-Manganese Steel

Metals ◽  
2019 ◽  
Vol 9 (3) ◽  
pp. 344 ◽  
Author(s):  
Simon Sevsek ◽  
Christian Haase ◽  
Wolfgang Bleck
Keyword(s):  
Mechanical Properties ◽  
Strain Rate ◽  
Strain Rate Sensitivity ◽  
Deformation Behavior ◽  
Rate Sensitivity ◽  
Manganese Steel ◽  
Strain Rates ◽  
Rate Dependent ◽  
Medium Manganese Steel ◽  
Multi Phase

The strain-rate-dependent deformation behavior of an intercritically annealed X6MnAl12-3 medium-manganese steel was analyzed with respect to the mechanical properties, activation of deformation-induced martensitic phase transformation, and strain localization behavior. Intercritical annealing at 675 °C for 2 h led to an ultrafine-grained multi-phase microstructure with 45% of mostly equiaxed, recrystallized austenite and 55% ferrite or recovered, lamellar martensite. In-situ digital image correlation methods during tensile tests revealed strain localization behavior during the discontinuous elastic-plastic transition, which was due to the localization of strain in the softer austenite in the early stages of plastic deformation. The dependence of the macroscopic mechanical properties on the strain rate is due to the strain-rate sensitivity of the microscopic deformation behavior. On the one hand, the deformation-induced phase transformation of austenite to martensite showed a clear strain-rate dependency and was partially suppressed at very low and very high strain rates. On the other hand, the strain-rate-dependent relative strength of ferrite and martensite compared to austenite influenced the strain partitioning during plastic deformation, and subsequently, the work-hardening rate. As a result, the tested X6MnAl12-3 medium-manganese steel showed a negative strain-rate sensitivity at very low to medium strain rates and a positive strain-rate sensitivity at medium to high strain rates.

Effect of Hot Extrusion on the Flow Behaviour of a Nickel-Based P/M Superalloy

2019 ◽  
Vol 298 ◽  
pp. 43-51
Author(s):  
Jia Yong Si ◽  
Song Hao Liu ◽  
Long Chen
Keyword(s):  
Activation Energy ◽  
Strain Rate ◽  
Strain Rate Sensitivity ◽  
Work Hardening ◽  
Rate Sensitivity ◽  
Hot Extrusion ◽  
Turbine Disk ◽  
Flow Behaviour ◽  
Strain Rates ◽  
Work Hardening Rate

This research investigated the effect of hot extrusion on the flow behaviour of nickel-based superalloy FGH4096 by hot compression experiments in the temperature range from 1020 to 1110 °C and strain rates ranging from 0.1 to 0.001 s-1. The influence of the hot extrusion on the initial microstructures, work hardening rate, strain rate sensitivity, and activation energy of deformation were discussed. The results show that the extruded microstructure is constituted by the fine dynamic recrystallisation of grains. The true strain-true stress curves show that the as-HIPed and as-HEXed FGH4096 superalloy present double flow stress peaks and discontinuous flow softening. The as-HEXed FGH4096 is easily dynamically softened at high temperatures and high strain rates compared with as-HIPed microstructures. As for the work hardening rate, the as-HEXed FGH4096 exhibits higher θ values than that of as-HIPed. It is beneficial to the homogenous deformation and grain refinement during subsequent turbine disk forging. Comparing to as-HIPed FGH4096, the highest strain rate sensitivity value of as-HEXed is 0.306 at 1110 °C. The isothermal superplastic forging of a P/M turbine disk may be carried out at this temperature. The deformation activation energy value of the as-HIPed FGH4096 is lower which means that dislocation sliding and climbing can be easily initiated in the as-HIPed alloy.

Sign in / Sign up

Export Citation Format

Share Document