scholarly journals THE METHOD OF DESIGNING HYDRAULIC DRIVES ON THE EXAMPLE OF A HYDRAULIC DRIVE OF A LIFTING-MAST DEVICE

2018 ◽  
pp. 21-26
Author(s):  
S. A. Smirnov ◽  
N. A. Gorshkova
Keyword(s):  
Mathematical Model ◽  
Hydraulic Drive ◽  
Visual Display ◽  
Theory And Practice ◽  
Production Cycle ◽  
Preliminary Evaluation ◽  
Hydraulic Systems ◽  
Modern Approach ◽  
Cad Cam ◽  
The Cost

The classical approach to the design of hydraulic drives includes complex calculations and real tests, which is a resource-consuming process. Reduce the cost of design allows the introduction of the development of simulation modeling and CAD / CAM / CAE / PDM automation complexes of the production cycle of enterprises. Modeling allows us to use systematic basis methodological achievements of the theory and practice of hydroautomatics for the design of hydraulic devices to accumulate in the orderly form design experience and provide model support for the life cycle of these products. The article deals with the modern approach to the design of hydraulic drives. A type of a preliminary evaluation of hydraulic drive characteris-tics is given in the example of a hydrodrive of a lifting and mast device. The principle and design schemes of the hydraulic drive are chosen, and a mathematical model is compiled on the basis of the requirements for hoisting and mast devices. A simulation model of the drive is developed on the basis of the mathematical model, consisting of several separate parts connected together. Parts represent a mixed structure of blocks that describe processes in mechanical and hydraulic systems. For visual display an animated 3D model has been created that allows you to observe the progress and results of the simulation. During the calculations, the position dependence graphs of the each link of the lifting and mast device on time, as well as pressure and flow on the safety valve were obtained. Conclusion, based on the results of modeling, was made about the adequacy of the application of models for estimating the characteristics of the projected hydraulic drive in the first approximation. It is recommended to develop such models at the stages of outline and technical design.

Modernization of Water Treatment System at Agricultural Enterprises Due to Introduction of Solar Energy

2020 ◽  
Vol 67 (1) ◽  
pp. 142-147
Author(s):  
Alina A. Aleksandrova ◽  
Maksim S. Zhuzhin ◽  
Yuliya M. Dulepova
Keyword(s):  
Mathematical Model ◽  
Water Treatment ◽  
Solar Energy ◽  
Energy Saving ◽  
Electric Energy ◽  
Solar Water Heater ◽  
Water Heater ◽  
Agricultural Enterprises ◽  
Solar Water ◽  
The Cost

Energy saving today is an integral part of the development strategy of agricultural organizations. Considerable attention is paid to the modernization and automation of technological processes in agricultural enterprises, which can improve the quality of work and reduce the cost of production. The direction of modernization is to reduce the consumption of electric energy by improving the water treatment system in livestock complexes. (Research purpose) The research purpose is to determine the potential of solar energy used in the Nizhny Novgorod region and to determine the possibility of its use for water heating in livestock complexes and to consider the cost-effectiveness of using a device to heat water through solar energy. (Materials and methods) Authors used an improved algorithm of Pixer and Laszlo, applied in the NASA project «Surface meteorology and Energy», which allows to calculate the optimal angle of inclination of the device for heating water. (Results and discussion) Designed a mock-up of a livestock complex with a solar water heater installed on the roof, protected by patent for invention No. 2672656. A mathematical model was designed experimentally to predict the results of the plant operation in non-described modes. (Conclusions) The article reveales the optimal capacity of the circulation pump. Authors have created a mathematical model of the device that allows to predict the water heating in a certain period of time. The article presents the calculations on the energy and economic efficiency of using a solar water heater. An electric energy saving of about 30 percent, in the economic equivalent of 35 percent.

scholarly journals Psychoacoustic Evaluation of Hydraulic Pumps

2021 ◽  
Vol 13 (13) ◽  
pp. 7320
Author(s):  
Tobias Pietrzyk ◽  
Markus Georgi ◽  
Sabine Schlittmeier ◽  
Katharina Schmitz
Keyword(s):  
Sound Pressure ◽  
Paired Comparison ◽  
Hydraulic Drive ◽  
Operating Parameter ◽  
Gear Pump ◽  
Hydraulic Systems ◽  
Hydraulic Pump ◽  
Listening Tests ◽  
Internal Gear ◽  
Axial Piston

In this study, sound measurements of an axial piston pump and an internal gear pump were performed and subjective pleasantness judgements were collected in listening tests (to analyze the subjective pleasantness), which could be seen as the inverse of the subjective annoyance of hydraulic drives. Pumps are the dominant sound source in hydraulic systems. The noise generation of displacement machines is subject of current research. However, in this research only the sound pressure level (SPL) was considered. Psychoacoustic metrics give new possibilities to analyze the sound of hydraulic drive technology and to improve the sound quality. For this purpose, instrumental measurements of the acoustic and psychoacoustic parameters are evaluated for both pump types. The recorded sounds are played back to the participants in listening tests. Participants evaluate them regarding the subjective pleasantness by means of paired comparison, which is an indirect scaling method. The dependence of the subjective pleasantness on speed and pressure was analyzed for both pump types. Different regression analyses were carried out to predict the subjectively perceived pleasantness or annoyance of the pumps. Results show that a lower speed is the decisive operating parameter for reducing both the SPL and the annoyance of a hydraulic pump.

scholarly journals An Optimized Mathematical Model for Items Supplies Planning of a Logistic System

2016 ◽  
Vol 10 (10) ◽  
pp. 133
Author(s):  
Mohammad Ali Nasiri Khalili ◽  
Mostafa Kafaei Razavi ◽  
Morteza Kafaee Razavi
Keyword(s):  
Mathematical Model ◽  
Mixed Integer ◽  
Logistics System ◽  
Proposed Model ◽  
Multiple Objective Decision Making ◽  
System Requirements ◽  
Purchasing Logistics ◽  
The Cost ◽  
The Mathematical Model ◽  
First Time

Items supplies planning of a logistic system is one of the major issue in operations research. In this article the aim is to determine how much of each item per month from each supplier logistics system requirements must be provided. To do this, a novel multi objective mixed integer programming mathematical model is offered for the first time. Since in logistics system, delivery on time is very important, the first objective is minimization of time in delivery on time costs (including lack and maintenance costs) and the cost of purchasing logistics system. The second objective function is minimization of the transportation supplier costs. Solving the mathematical model shows how to use the Multiple Objective Decision Making (MODM) can provide the ensuring policy and transportation logistics needed items. This model is solved with CPLEX and computational results show the effectiveness of the proposed model.

Autonomous Energy Efficient Co-Generation Units

2014 ◽  
Vol 672-674 ◽  
pp. 580-584 ◽  
Author(s):  
Mikhail Petrichenko ◽  
Dmitriy Tseytin ◽  
Darya Nemova ◽  
Nikita Kharkov
Keyword(s):  
Mathematical Model ◽  
Energy Efficient ◽  
Energy Resources ◽  
The Cost ◽  
Liquefied Gas

The technology of application of the liquefied gas for the centralized providing with energy resources of a complex of building remote from network energy resources is considered in this work, the economic-mathematical model of the first approach of the concept of the device of the settlement, allowing to determine the cost of received energy and equipment payback periods is offered.

Study on Mathematical Model of High Speed Milling Force for Plastic Mold Steel 3Cr2Mo

2011 ◽  
Vol 291-294 ◽  
pp. 710-714
Author(s):  
Jun Min Xiao ◽  
Ying Xu
Keyword(s):  
Experimental Data ◽  
Mathematical Model ◽  
High Speed ◽  
High Hardness ◽  
Milling Force ◽  
High Speed Milling ◽  
Engineering Requirement ◽  
Practical Engineering ◽  
Cad Cam ◽  
Plastic Mold

Mold steel 3Cr2Mo has been used widely in manufacturing of plastic mold formed parts, owing to fine mechanical properties. However, it is also very difficult to cut mold formed parts of steel 3Cr2Mo due to high hardness. Ordinary NC cutting method of steel 3Cr2Mo is unable to relate to modern mold manufacturing due to bad cutting property, so it is extremely significant for improving cutting property of steel 3Cr2Mo to study the high speed milling technology. On the basis of improving the traditional cutting force formula, the mathematical model of high speed milling force for steel 3Cr2Mo was derived and solved by using the experimental data and constructing matrix equation based on MATLAB software. Comparing with experimental data, the error of mathematical model of high speed milling force could be controlled within 6 percent. Due to high precision the model of high speed milling force can meet practical engineering requirement and has great value in the fields of CAD/CAM/CAE.

scholarly journals A simulation to identify the optimal area to survey in the early stage of invasion by Solenopsis invicta

2021 ◽  
Author(s):  
Shumpei Hisamoto ◽  
Koichi Goka ◽  
Yoshiko Sakamoto
Keyword(s):  
Mathematical Model ◽  
Cost Effectiveness ◽  
Solenopsis Invicta ◽  
Early Stage ◽  
Geographical Information ◽  
Survey Area ◽  
Single Colony ◽  
The Status ◽  
Optimal Area ◽  
The Cost

Abstract Efforts to eradicate invasive alien species commonly use simulations to calculate the cost-effectiveness of surveys. Although eradication of Solenopsis invicta in the early stages of an invasion is important, few simulations are available to calculate the cost-effectiveness of surveys when a single colony has been detected. In the case of S. invicta, it is difficult to determine from the status of the detected colony whether new queens have dispersed, so it is necessary to consider dispersal as a probabilistic event and calculate its probability. We therefore first constructed a mathematical model in which we used Bayesian statistics to estimate the probability of dispersal as a function of the results of the survey. This mathematical model revealed that the efficacy of the survey and the associated cost differed greatly between cases depending on whether dispersal was or was not confirmed. Next, we developed a simulation that incorporated this mathematical model to inform the determination of the survey area when a single colony had been detected. The simulation showed how ecological parameters and geographical information could be used to identify an efficacious survey area, even in heterogeneous landscapes such as international ports where invasions occur sporadically. Finally, we used this simulation to assess the efficacy of a survey in the case of an S. invicta outbreak at the Port of Tokyo, Japan. The results suggested that the survey covered a sufficiently wide area but that it could have been designed in a more efficacious manner.

scholarly journals Fractional-Order Modelling and Optimal Control of Cholera Transmission

2021 ◽  
Vol 5 (4) ◽  
pp. 261
Author(s):  
Silvério Rosa ◽  
Delfim F. M. Torres
Keyword(s):  
Mathematical Model ◽  
Optimal Control ◽  
Sensitivity Analysis ◽  
Fractional Order ◽  
Control Measures ◽  
Time Interval ◽  
Variable Order ◽  
Effectiveness Analysis ◽  
The Cost ◽  
Derivative Order

A Caputo-type fractional-order mathematical model for “metapopulation cholera transmission” was recently proposed in [Chaos Solitons Fractals 117 (2018), 37–49]. A sensitivity analysis of that model is done here to show the accuracy relevance of parameter estimation. Then, a fractional optimal control (FOC) problem is formulated and numerically solved. A cost-effectiveness analysis is performed to assess the relevance of studied control measures. Moreover, such analysis allows us to assess the cost and effectiveness of the control measures during intervention. We conclude that the FOC system is more effective only in part of the time interval. For this reason, we propose a system where the derivative order varies along the time interval, being fractional or classical when more advantageous. Such variable-order fractional model, that we call a FractInt system, shows to be the most effective in the control of the disease.

scholarly journals A novel economic-filter for evaluating sub-Saharan diamondiferous kimberlites

2020 ◽  
Vol 120 (9) ◽  
Author(s):  
P. Leach ◽  
B.P. von der Heyden ◽  
P. Ravenscroft
Keyword(s):  
Net Present Value ◽  
Early Stage ◽  
Economic Status ◽  
Economic Viability ◽  
Preliminary Evaluation ◽  
Cost Models ◽  
Sub Saharan ◽  
Filter Approach ◽  
Geological Complexity ◽  
The Cost

SYNOPSIS Because of their high degree of geological complexity, kimberlite-hosted diamond deposits are exceedingly difficult to evaluate for economic viability. Accordingly, standard mineral asset evaluation protocols (e.g., the Cost-, Market-, and Income Approaches defined in the SAMREC Code) may not hold sufficient predictive abilities for these deposit types, especially at the early stages of exploration. Here we present a novel tool, a cost filter approach towards preliminary evaluation of economic viability of southern African kimberlite-hosted diamond deposits, using the AK6 and BK11 diamond deposits from the Orapa diamond field as case studies. The development of this cost filter is underpinned by elements of both the Market Approach (i.e., comparisons to similar deposits) and the Income Approach (i.e., use of net present value (NPV) calculations) for mineral asset evaluation. Importantly, the cost filter is constrained through modification of only two primary variables (the average diamond value and the diamond grade) and thus differs significantly from other cost filters that rely on estimation and assumptions for every parameter input into an NPV calculation. The cost filter correctly predicts the sub-economic status of the BK11 diamond pipe, and is thus presented as a useful geo-economic tool for early stage kimberlite evaluation within the local southern African context. The approach and its theoretical underpinning foreseeably hold vast potential for use in the economic evaluation of other ore commodities, particularly where socio-economic and political risk factors can be negated by employing a geographic constraint. Keywords: diamond, economic viability, kimberlites, southern Africa, cost models filter.

Sign in / Sign up

Export Citation Format

Share Document