scholarly journals Removal of Amoxicillin from Water by Adsorption on Water Treatment Residues

2020 ◽  
Vol 17 (3(Suppl.)) ◽  
pp. 1071
Author(s):  
Mahmood mahdi Barbooti ◽  
Sarah H. Zahraw
Keyword(s):  
Wastewater Treatment ◽  
Water Treatment ◽  
Contact Time ◽  
Operating Conditions ◽  
Optimum Conditions ◽  
Inorganic Pollutants ◽  
Initial Concentration ◽  
Low Concentrations ◽  
Wide Range ◽  
Mathematical Relationships

The presence of residual antibiotics in water results in the development of antibiotics resistant genes. The available wastewater treatment systems are not capable of removing such antibiotics from sewage. Thus, antibiotics need to be removed before the discharge of wastewater. Adsorption is among the promising techniques for the wastewater treatment to aid the removal of a wide range of organic and inorganic pollutants. The present work is a contribution to the search for an economical method for the removal of low concentrations of amoxicillin (AMX) from water by adsorption on water treatment residue, WTR, taken from a local drinking water facility. The chemical composition and the adsorptive characteristics of the material were first evaluated using energy dispersive spectroscopy, EDS, and sorption of methylene blue, respectively. The porous character of the sorbent was modified by ignition. The application of the WTR for the adsorption of AMX was studied under various operating conditions including sorbent dosage, 2-20 g/L at room temperature; contact time 30-240 min.; and initial concentration range of the antibiotic, 0.00004-0.00012 M. facility. To aid the experimental work, statistical software was employed to design the experiments and evaluation of the results. Graphical and mathematical relationships have been established for the adsorption efficiency with the operating conditions. The adsorption capacity was calculated from the plot of the adsorbed drug against the sorbent content and found to be 19.966 µmol/g WTR. The sorption efficiency depends on the initial concentration and being better at low concentration (0.00004 M) and equilibrium time (within 100 mins.). The optimum conditions of the adsorption are: AMX Concentration, 0.00004 M; Contact time. The optimum conditions of the adsorption are: AMX Concentration, 0.00004 M; Contact time, 90 min., and WTR content of 15.5 g/L to give removal efficiency of 89.2%.

scholarly journals Applications of Biocatalysts for Sustainable Oxidation of Phenolic Pollutants: A Review

2021 ◽  
Vol 13 (15) ◽  
pp. 8620
Author(s):  
Sanaz Salehi ◽  
Kourosh Abdollahi ◽  
Reza Panahi ◽  
Nejat Rahmanian ◽  
Mozaffar Shakeri ◽  
...  
Keyword(s):  
Phenolic Compounds ◽  
Operating Conditions ◽  
Phenolic Pollutants ◽  
Petroleum Refinery Wastewater ◽  
Start Up ◽  
Low Concentrations ◽  
Effective Removal ◽  
Wide Range ◽  
Loading Effects ◽  
Spent Caustic

Phenol and its derivatives are hazardous, teratogenic and mutagenic, and have gained significant attention in recent years due to their high toxicity even at low concentrations. Phenolic compounds appear in petroleum refinery wastewater from several sources, such as the neutralized spent caustic waste streams, the tank water drain, the desalter effluent and the production unit. Therefore, effective treatments of such wastewaters are crucial. Conventional techniques used to treat these wastewaters pose several drawbacks, such as incomplete or low efficient removal of phenols. Recently, biocatalysts have attracted much attention for the sustainable and effective removal of toxic chemicals like phenols from wastewaters. The advantages of biocatalytic processes over the conventional treatment methods are their ability to operate over a wide range of operating conditions, low consumption of oxidants, simpler process control, and no delays or shock loading effects associated with the start-up/shutdown of the plant. Among different biocatalysts, oxidoreductases (i.e., tyrosinase, laccase and horseradish peroxidase) are known as green catalysts with massive potentialities to sustainably tackle phenolic contaminants of high concerns. Such enzymes mainly catalyze the o-hydroxylation of a broad spectrum of environmentally related contaminants into their corresponding o-diphenols. This review covers the latest advancement regarding the exploitation of these enzymes for sustainable oxidation of phenolic compounds in wastewater, and suggests a way forward.

Biosorption of As(V) from aqueous solutions by living cells of Bacillus cereus

2012 ◽  
Vol 66 (8) ◽  
pp. 1699-1707 ◽  
Author(s):  
A. K. Giri ◽  
R. K. Patel ◽  
P. C. Mishra
Keyword(s):  
Aqueous Solutions ◽  
Bacillus Cereus ◽  
Contact Time ◽  
Living Cells ◽  
Optimum Conditions ◽  
Order Model ◽  
Initial Concentration ◽  
Pseudo Second Order ◽  
Biomass Dosage ◽  
Batch Biosorption

In this work, the biosorption of As(V) from aqueous solutions by living cells of Bacillus cereus has been reported. The batch biosorption experiments were conducted with respect to biosorbent dosage 0.5 to 15 g/L, pH 2 to 9, contact time 5 to 90 min, initial concentration 1 to 10 mg/L and temperature 10 to 40 °C. The maximum biosorption capacity of B. cereus for As(V) was found to be 30.04 at pH 7.0, at optimum conditions of contact time of 30 min, biomass dosage of 6 g/L, and temperature of 30 ± 2 °C. Biosorption data were fitted to linearly transformed Langmuir isotherms with R2 (correlation coefficient) >0.99. Bacillus cereus cell surface was characterized using AFM and FTIR. The metal ions were desorbed from B. cereus using both 1 M HCl and 1 M HNO3. The pseudo-second-order model was successfully applied to predict the rate constant of biosorption.

scholarly journals Photocatalytic Degradation of Naphthalene By UV/Zno: Kinetics, Influencing Factors and Mechanisms

2021 ◽  
Vol 37 (1) ◽  
pp. 65-70
Author(s):  
Aram Dokht Khatibi ◽  
Kethineni Chandrika ◽  
Ferdos Kord Mostafapour ◽  
Ali Akbar Sajadi ◽  
Davoud Balarak
Keyword(s):  
Wastewater Treatment ◽  
Reaction Time ◽  
Aqueous Solutions ◽  
Aromatic Hydrocarbons ◽  
Contact Time ◽  
Initial Concentration ◽  
Applied Study ◽  
Batch System ◽  
Initial Ph ◽  
Conventional Wastewater Treatment

Conventional wastewater treatment is not able to effectively remove Aromatic hydrocarbons such as Naphthalene, so it is important to remove the remaining antibiotics from the environment. The aim of this study was to evaluate the efficiency of UV/ZnOphotocatalytic process in removing naphthalene antibiotics from aqueous solutions.This was an experimental-applied study that was performed in a batch system on a laboratory scale. The variables studied in this study include the initial pH of the solution, the dose of ZnO, reaction time and initial concentration of Naphthalene were examined. The amount of naphthalene in the samples was measured using GC.The results showed that by decreasing the pH and decreasing the initial concentration of naphthalene and increasing the contact time, the efficiency of the process was developed. However, an increase in the dose of nanoparticles to 0.8 g/L had enhance the efficiency of the process was enhanced, while increasing its amount to values higher than 0.8 g/L has been associated with a decrease in removal efficiency.The results of this study showed that the use of UV/ZnOphotocatalytic process can be addressed as a well-organized method to remove naphthalene from aqueous solutions.

scholarly journals Phenol removal from aqueous solution using silica and activated carbon derived from rice husk

2019 ◽  
Vol 14 (4) ◽  
pp. 897-907 ◽  
Author(s):  
Hosseinali Asgharnia ◽  
Hamidreza Nasehinia ◽  
Roohollah Rostami ◽  
Marziah Rahmani ◽  
Seyed Mahmoud Mehdinia
Keyword(s):  
Aqueous Solution ◽  
Activated Carbon ◽  
Water Treatment ◽  
Organic Pollutants ◽  
Rice Husk ◽  
Contact Time ◽  
Adsorption Process ◽  
Phenol Removal ◽  
Initial Concentration ◽  
Maximum Removal

Abstract Phenol and its derivatives are organic pollutants with dangerous effects, such as poisoning, carcinogenicity, mutagenicity, and teratogenicity in humans and other organisms. In this study, the removal of phenol from aqueous solution by adsorption on silica and activated carbon of rice husk was investigated. In this regard, the effects of initial concentration of phenol, pH, dosage of the adsorbents, and contact time on the adsorption of phenol were investigated. The results showed that the maximum removal of phenol by rice husk silica (RHS) and rice husk activated carbon (RHAC) in the initial concentration of 1 mgL−1 phenol, 2 gL−1 adsorbent mass, 120 min contact time, and pH 5 (RHS) or pH 6 (RHAC) were obtained up to 91% and 97.88%, respectively. A significant correlation was also detected between increasing contact times and phenol removal for both adsorbents (p < 0.01). The adsorption process for both of the adsorbents was also more compatible with the Langmuir isotherm. The results of this study showed that RHS and RHAC can be considered as natural and inexpensive adsorbents for water treatment.

A review of the detection, fate and effects of engineered nanomaterials in wastewater treatment plants

2013 ◽  
Vol 68 (7) ◽  
pp. 1440-1453 ◽  
Author(s):  
Peta A. Neale ◽  
Åsa K. Jämting ◽  
Beate I. Escher ◽  
Jan Herrmann
Keyword(s):  
Wastewater Treatment ◽  
Surface Coating ◽  
Wastewater Treatment Plants ◽  
Engineered Nanomaterials ◽  
Detection Methods ◽  
Laboratory Studies ◽  
Test Conditions ◽  
Treated Effluent ◽  
Low Concentrations ◽  
Wide Range

Engineered nanomaterials (ENMs) are increasingly found in a wide range of products and processes, and consequently increasing loads are expected to reach wastewater treatment plants (WWTPs). To better assess the potential risk of ENMs to the environment via input through WWTP effluents, this review considers ENM detection methods, fate in WWTPs and potential effects on biota exposed to wastewater associated ENMs. Characterising ENMs in complex matrices presents many challenges, especially at low concentrations. Combining separation methods with techniques to assess particle size and chemical composition appears to be the most suitable approach for wastewater. In a range of studies, the majority of ENMs are removed from the aqueous phase by flocculation and sedimentation and remain in the sludge. However, ENM surface coating and the presence of organic matter and surfactants can alter removal. ENMs may affect biota via discharge of treated effluent to the aquatic environment or by application of sewage sludge to soil, although observed effects in laboratory studies only occurred at concentrations several orders of magnitude higher than the expected environmental levels. More realistic experimental designs with improved quantification of ENM properties under the selected test conditions are required to better understand the fate and effect of ENMs associated with WWTPs.

Ten years of industrial and municipal membrane bioreactor (MBR) systems – lessons from the field

2014 ◽  
Vol 70 (2) ◽  
pp. 279-288 ◽  
Author(s):  
Asun Larrea ◽  
Andre Rambor ◽  
Malcolm Fabiyi
Keyword(s):  
Wastewater Treatment ◽  
Industrial Wastewater ◽  
Municipal Wastewater ◽  
Membrane Bioreactors ◽  
Operating Conditions ◽  
Industrial Plant ◽  
Municipal Wastewater Treatment ◽  
Design Data ◽  
Wide Range ◽  
Process Controls

The use of membrane bioreactors (MBRs) in activated sludge wastewater treatment has grown significantly in the last decade. While there is growing awareness and knowledge about the application of MBR technology in municipal wastewater treatment, not much information is available on the application of MBRs in industrial wastewater treatment. A comparative study of design data, operating conditions and the major challenges associated with MBR operations in 24 MBR plants treating both municipal and industrial wastewater, built by and/or operated by Praxair, Inc., is presented. Of the 24 MBR systems described, 12 of the plants used high purity oxygen (HPO). By enabling a wide range of food/microorganism ratios and loading conditions in the same system, HPO MBR systems can extend the options available to industrial plant operators to meet the challenges of wide fluctuations in organic loading and footprint limitations. While fouling in industrial MBR systems can be an issue, adequate flux and permeability values can be reliably maintained by the use of good maintenance strategies and effective process controls (pretreatment, cleaning and membrane autopsies).

scholarly journals Study Into Dynamic Behaviour of the Methylene Blue Adsorption on Activated Carbon

2021 ◽  
Vol 29 (48) ◽  
pp. 105-113
Author(s):  
Alica Pastierová ◽  
Maroš Sirotiak
Keyword(s):  
Methylene Blue ◽  
Activated Carbon ◽  
Contact Time ◽  
Dynamic Behaviour ◽  
Time Effect ◽  
Adsorption Kinetic ◽  
Optimum Conditions ◽  
Methylene Blue Adsorption ◽  
Initial Concentration ◽  
Pseudo Second Order

Abstract This paper presents a study into dynamic behaviour of the methylene blue adsorption (MB) on activated carbon. Effect of four parameters were studied: effect of the adsorbent dosage, effect of contact time, effect of pH, and effect of the initial concentration of methylene blue. The adsorption kinetic data were modelled using the pseudo-first and pseudo-second orders. Results show that, based on the experimental data, the pseudo-second order could be considered satisfactory. Thermodynamic parameters proved that adsorption of dye was spontaneous owing to increase in temperature and endothermic nature. Taguchi method was applied to determine the optimum conditions for removal of methylene blue by activated carbon. The optimum conditions were found to be pH = 7, contact time 60 min, initial concentration of MB 4 mg/L.

Hydrophobic Deep Eutectic as a New Solvent for Liquid-Liquid Extraction and Its Potential Application in Ligandless Extraction of Cu (II)

2020 ◽  
Vol 7 (1) ◽  
pp. 32-39
Author(s):  
Nur Hidayah Sazali ◽  
Tham Wei Jie ◽  
Nurul Yani Rahim
Keyword(s):  
Contact Time ◽  
Capric Acid ◽  
Cost Effective ◽  
Liquid Extraction ◽  
Environmentally Benign ◽  
Optimum Conditions ◽  
Initial Concentration ◽  
Liquid Liquid Extraction ◽  
Ft Ir ◽  
The Cost

Background: The cost-effective and environmentally benign solvent of hydrophobic deep eutectic (DES) was prepared for the removal of Cu (II) from aqueous solution. Hydrophobic DES has been gaining increasing attention from researchers for the replacement of hazardous solvent consumption in liquid-liquid extraction (LLE). Objectives: To synthesize the hydrophobic DES and optimize the parameters for ligandless LLE using DES, and LLE with DES-LIG, respectively. Materials and Methods: The fatty acid-based DES was prepared using a mixture of capric acid (C10) and lauric acid (C12) as a potential solvent for the extraction of Cu (II). The DES was characterized via FT-IR, NMR, and TGA. The removal percentage of Cu (II) was compared between ligandless LLE and other conventional LLE techniques. DES was used as the solvent in the ligandless LLE, while 1,10-phenanathroline ligand with DES (DES-LIG) was used in the conventional LLE techniques. The optimized parameters such as pH, initial concentration, and contact time for Cu (II) removal were studied and analyzed using atomic absorption spectroscopy (AAS). Results and Discussion: The ligandless LLE with DES demonstrated the highest removal percentage of Cu (II) at optimum conditions of pH 8, initial concentration of 80 μg mL-1, and contact time of 45 minutes. Conclusion: The removal of Cu (II) was more effective in ligandless LLE using DES.

scholarly journals Defluoridation of synthetic and natural waters by polyaluminum chloride-chitosan (PACl-Ch) composite coagulant

2017 ◽  
Vol 18 (1) ◽  
pp. 259-269 ◽  
Author(s):  
Mehrnoosh Abtahi ◽  
Ali Koolivand ◽  
Sina Dobaradaran ◽  
Kamyar Yaghmaeian ◽  
Anoushiravan Mohseni-Bandpei ◽  
...  
Keyword(s):  
Natural Waters ◽  
High Efficiency ◽  
Operating Conditions ◽  
Fluoride Removal ◽  
Optimum Conditions ◽  
Polyaluminum Chloride ◽  
Residual Level ◽  
Wide Range ◽  
High Concentrations ◽  
Composite Coagulant

Abstract Removal of fluoride from drinking water by polyaluminum chloride-chitosan (PACl-Ch) composite coagulant was studied in a batch system. Two types of PACl-Ch coagulant were synthetized as PACl-Ch I and PACl-Ch II with chitosan to aluminum (Ch:Al) weight ratios of 0.5 and 1.0, respectively, and were used for defluoridation under different operating conditions. The composite coagulants were found to be more efficient than both PACl and chitosan. By an increase in the Ch:Al ratio from 0.5 to 1.0, the composite coagulant provided a little more efficiency of fluoride removal and lower residual level of Al. The optimum conditions of pH for fluoride removal by PACl-Ch I and PACl-Ch II were 8.0 and 7.5, respectively. Fluoride removal by the coagulants was not significantly affected by natural organic matter and turbidity, but was declined by high concentrations of common ions. To achieve desirable fluoride levels (lower than 1.0 mg/L) for natural water samples with fluoride levels of 2.0–2.9 mg/L, the required dosage of the composite coagulants were determined to be as low as 3–5 mgAl/L. The PACl-Ch coagulants demonstrated high efficiency for fluoride removal as well as low Al residual level (mainly lower than 0.2 mg/L) in a wide range of operating conditions.

scholarly journals Adsorption Combined Phytoremediation System for Treatment of Laundry Wastewater

2019 ◽  
Vol 280 ◽  
pp. 05002 ◽  
Author(s):  
Eko Siswoyo ◽  
Andiny Widya Utari ◽  
Lisa Gustia Norma Mungkari
Keyword(s):  
Drinking Water ◽  
Wastewater Treatment ◽  
Water Treatment ◽  
Contact Time ◽  
Treatment Plant ◽  
Oxygen Demand ◽  
Drinking Water Treatment ◽  
Water Treatment Plant ◽  
Environmental Technology ◽  
Near Future

Laundry activities grow rapidly in Indonesia in the recent year, remaining the problem of environmental pollution because of the use of detergent. The purpose of the current study was to investigate the ability of sludge of drinking water treatment plant (DWTP) as adsorbent combined with phytoremediation system to remove chemical oxygen demand (COD), phosphate and surfactant in laundry wastewater. Batch and continuous blow studies were conducted on different variables such as adsorbent mass, contact time, and type of plant for phytoremediation system. The results of the current study show that adsorption combined phytoremediation system could remove COD, phosphate, and surfactant up to 77.5%, 54.3%, and 99.9%, respectively. Based on the results, it means that the adsorption combined phytoremediation system could be considered as an appropriate environmental technology for laundry wastewater treatment in the near future.

Sign in / Sign up

Export Citation Format

Share Document