Deconvolution of Wellbore Pressure and Flow Rate

In drilling operations, accurate estimation of pressure profile in the wellbore is essential to achieve better bottom hole pressure control. Adjusting the drilling fluid properties and optimizing flow rate require precise knowledge of the pressure profile in the circulation system. Annular pressure profile calculations must consider solids present in the drilling fluid because the solids drilled from formations may have a significant effect on pressure in the wellbore. In cases of high solids fraction or solid pack off, the pressure loss caused by solids is much higher than the friction pressure loss. This paper looks into the effect of solids on the wellbore pressure profile under different conditions. An extensive number of experiments were conducted on a 90-ft-long, 4.5″x8″ full-scale flow loop to simulate field conditions. The effects of solids on pressure profile in the annulus are investigated. In the experimental results, a significant difference is found between the pressure profile with solids and without solids in the wellbore. A practical approach to calculate the pressure profile by considering the effects of solids in the wellbore is developed. This approach is based on the results of solids behavior in the wellbore. Both solids fraction in the well and solids pack off are considered in the proposed approach. The prediction results are in good agreement with the experimental data. The results of this study show how the pressure profile in the wellbore varies when solids present in the annulus. The pressure gradient with solids can be several times larger than the pure friction loss without solids. A decrease in flow rate may lead to a higher pressure profile and the risk of solids pack off in the wellbore because it increases the solids fraction. Results of this paper may have important applications in drilling operations.

Download Full-text

Equivalent Circulation Density Analysis of Geothermal Well by Coupling Temperature

10.20944/preprints201701.0125.v1 ◽

2017 ◽

Author(s):

Xiuhua Zheng ◽

Chenyang Duan ◽

Zheng Yan ◽

Hongyu Ye ◽

Zhiqing Wang ◽

...

Keyword(s):

Flow Rate ◽

Drilling Fluid ◽

Model Fitting ◽

Geothermal Gradient ◽

Pressure Control ◽

Geothermal Field ◽

Drilling Fluids ◽

Geothermal Well ◽

Time Flow ◽

Wellbore Pressure

The accurate wellbore pressure control not only prevents from lost circulation/blowout and fracturing formation by managing density of drilling fluid, but also improves productivity by mitigating reservoir damage. The geothermal pressure calculated by constant parameters for geothermal well would bring big error easily, as the changes of physical, rheological and thermal properties of drilling fluids with temperature were neglected. This paper researches the wellbore pressure coupling by calculating the temperature distribution with existed model, fitting the rule of density of drilling fluid with temperature and establishing mathematical models to stimulate the wellbore pressures, which is expressed as the variation of Equivalent Circulating Density (ECD) under different conditions. With this method, temperature and ECDs in the wellbore of the first medium-deep geothermal well ZK212 Yangyi Geothermal Field in Tibet were determined, and the sensitivity analysis was simulated by assumed parameters, i.e. circulating time, flow rate, geothermal gradient, diameters of wellbore, rheological models and regimes, the results indicated the geothermal gradient and flow rate were the most influence parameters on the temperature and ECD distribution, and additives added in drilling fluid should be careful which would change the properties of drilling fluid and induce the temperature redistribution. To make sure the safe drilling, velocity of pipes tripping into the hole, depth and diameter of wellbore are considered to control the surge pressure.

Download Full-text

Rate and pressure behavior considering the fractal characteristics of structurally disordered fractured reservoirs

Journal of Petroleum Exploration and Production Technology ◽

10.1007/s13202-020-00999-x ◽

2020 ◽

Author(s):

Salam Al-Rbeawi

Keyword(s):

Flow Rate ◽

Fractured Reservoirs ◽

Flow Coefficient ◽

Analytical Models ◽

Productivity Index ◽

Dual Porosity ◽

Pressure Behavior ◽

Wellbore Pressure ◽

Fractal Characteristics ◽

The Impact

Abstract The main objective of this paper is to understand the impact of the fractal characteristics of fractured reservoirs on their pressure behavior, flow rate decline, and productivity index. The paper proposes a new methodology for developing several analytical models for describing the wellbore pressure distribution and the flow rate decline trend. The proposed models consider including the fractal characteristics such as the mass fractal dimension, conductivity index of anomalous diffusion flow mechanism, fractal-network parameters, fractional-derivative order, and matrix/fracture-interaction index as well as dual-porosity media characteristics such as the storativity and interporosity flow coefficient in the analytical models of the pressure, rate, and productivity index. The study has found that: (1) Some of the fractal characteristics have a significant impact on reservoir performance, while others may not have a significant impact. (2) Fractal reservoirs exhibit better performance than the standard geometry reservoirs of single and dual-porosity media.

Download Full-text

A Novel Reconstitution Method for Inducing the Formation of Regular 2-Dimensional Arrays of Membrane Proteins and Lipids

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100102845 ◽

1988 ◽

Vol 46 ◽

pp. 152-153 ◽

Cited By ~ 1

Author(s):

A. Engel ◽

A. Holzenburg ◽

K. Stauffer ◽

J. Rosenbusch ◽

U. Aebi

Keyword(s):

Membrane Proteins ◽

Flow Rate ◽

Lipid Membranes ◽

Functional Characterization ◽

Dimensional Structure ◽

Electron Crystallography ◽

Peltier Element ◽

Protein Ratio ◽

Precise Control ◽

3 Dimensional

Reconstitution of solubilized and purified membrane proteins in the presence of phospholipids into vesicles allows their functions to be studied by simple bulk measurements (e.g. diffusion of differently sized solutes) or by conductance measurements after transformation into planar membranes. On the other hand, reconstitution into regular protein-lipid arrays, usually forming at a specific lipid-to-protein ratio, provides the basis for determining the 3-dimensional structure of membrane proteins employing the tools of electron crystallography.To refine reconstitution conditions for reproducibly inducing formation of large and highly ordered protein-lipid membranes that are suitable for both electron crystallography and patch clamping experiments aimed at their functional characterization, we built a flow-dialysis device that allows precise control of temperature and flow-rate (Fig. 1). The flow rate is generated by a peristaltic pump and can be adjusted from 1 to 500 ml/h. The dialysis buffer is brought to a preselected temperature during its travel through a meandering path before it enters the dialysis reservoir. A Z-80 based computer controls a Peltier element allowing the temperature profile to be programmed as function of time.

Download Full-text

Novel epoxy/anhydride alternatives for biological electron microscopy: Physical and performance characteristis of embed 812 and LX 112 in combination with NSA/NMA/DMAE

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100156985 ◽

1989 ◽

Vol 47 ◽

pp. 1000-1001

Author(s):

Joe A. Mascorro ◽

Gerald S. Kirby

Keyword(s):

Electron Microscopy ◽

Flow Rate ◽

Succinic Anhydride ◽

Volume Flow Rate ◽

Mass Density ◽

Uranyl Acetate ◽

Volume Flow ◽

Base Resin ◽

And Performance ◽

Acid Anhydrides

Embedding media based upon an epoxy resin of choice and the acid anhydrides dodecenyl succinic anhydride (DDSA), nadic methyl anhydride (NMA), and catalyzed by the tertiary amine 2,4,6-Tri(dimethylaminomethyl) phenol (DMP-30) are widely used in biological electron microscopy. These media possess a viscosity character that can impair tissue infiltration, particularly if original Epon 812 is utilized as the base resin. Other resins that are considerably less viscous than Epon 812 now are available as replacements. Likewise, nonenyl succinic anhydride (NSA) and dimethylaminoethanol (DMAE) are more fluid than their counterparts DDSA and DMP- 30 commonly used in earlier formulations. This work utilizes novel epoxy and anhydride combinations in order to produce embedding media with desirable flow rate and viscosity parameters that, in turn, would allow the medium to optimally infiltrate tissues. Specifically, embeding media based on EmBed 812 or LX 112 with NSA (in place of DDSA) and DMAE (replacing DMP-30), with NMA remaining constant, are formulated and offered as alternatives for routine biological work.Individual epoxy resins (Table I) or complete embedding media (Tables II-III) were tested for flow rate and viscosity. The novel media were further examined for their ability to infilftrate tissues, polymerize, sectioning and staining character, as well as strength and stability to the electron beam and column vacuum. For physical comparisons, a volume (9 ml) of either resin or media was aspirated into a capillary viscocimeter oriented vertically. The material was then allowed to flow out freely under the influence of gravity and the flow time necessary for the volume to exit was recored (Col B,C; Tables). In addition, the volume flow rate (ml flowing/second; Col D, Tables) was measured. Viscosity (n) could then be determined by using the Hagen-Poiseville relation for laminar flow, n = c.p/Q, where c = a geometric constant from an instrument calibration with water, p = mass density, and Q = volume flow rate. Mass weight and density of the materials were determined as well (Col F,G; Tables). Infiltration schedules utilized were short (1/2 hr 1:1, 3 hrs full resin), intermediate (1/2 hr 1:1, 6 hrs full resin) , or long (1/2 hr 1:1, 6 hrs full resin) in total time. Polymerization schedules ranging from 15 hrs (overnight) through 24, 36, or 48 hrs were tested. Sections demonstrating gold interference colors were collected on unsupported 200- 300 mesh grids and stained sequentially with uranyl acetate and lead citrate.

Download Full-text

Severe Drooling and Treatment With Botulinum Toxin

Perspectives on Swallowing and Swallowing Disorders (Dysphagia) ◽

10.1044/sasd21.1.15 ◽

2012 ◽

Vol 21 (1) ◽

pp. 15-21

Author(s):

Merete Bakke ◽

Allan Bardow ◽

Eigild Møller

Keyword(s):

Botulinum Toxin ◽

Side Effects ◽

Health Risk ◽

Flow Rate ◽

Clinical Evidence ◽

Acetylcholine Release ◽

Psychosocial Problems ◽

Rate Reduction ◽

Local Inhibition ◽

Surgical Treatments

Severe drooling is associated with discomfort and psychosocial problems and may constitute a health risk. A variety of different surgical and non-surgical treatments have been used to diminish drooling, some of them with little or uncertain effect and others more effective but irreversible or with side effects. Based on clinical evidence, injection with botulinum toxin (BTX) into the parotid and submandibular glands is a useful treatment option, because it is local, reversible, and with few side effects, although it has to be repeated. The mechanism of BTX is a local inhibition of acetylcholine release, which diminishes receptor-coupled secretion and results in a flow rate reduction of 25–50% for 2–7 months.

Download Full-text

EFFECT OF BODY MASS INDEX ON PEAK EXPIRATORY FLOW RATE

International Journal of Medical and Biomedical Studies ◽

10.32553/ijmbs.v3i9.570 ◽

2019 ◽

Vol 3 (9) ◽

Author(s):

K. Subramanyam ◽

Dr. P. Subhash Babu

Keyword(s):

Body Mass Index ◽

Body Mass ◽

Peak Expiratory Flow ◽

Flow Rate ◽

Peak Expiratory Flow Rate ◽

Normal Weight ◽

The Body ◽

Health Care Centre ◽

Expiratory Flow ◽

Group B

Obesity has become one of the major health issues in India. WHO defines obesity as “A condition with excessive fat accumulation in the body to the extent that the health and wellbeing are adversely affected”. Obesity results from a complex interaction of genetic, behavioral, environmental and socioeconomic factors causing an imbalance in energy production and expenditure. Peak expiratory flow rate is the maximum rate of airflow that can be generated during forced expiratory manoeuvre starting from total lung capacity. The simplicity of the method is its main advantage. It is measured by using a standard Wright Peak Flow Meter or mini Wright Meter. The aim of the study is to see the effect of body mass index on Peak Expiratory Flow Rate values in young adults. The place of a study was done tertiary health care centre, in India for the period of 6 months. Study was performed on 80 subjects age group 20 -30 years, categorised as normal weight BMI =18.5 -24.99 kg/m2 and overweight BMI =25-29.99 kg/m2. There were 40 normal weight BMI (Group A) and 40 over weight BMI (Group B). BMI affects PEFR. Increase in BMI decreases PEFR. Early identification of risk individuals prior to the onset of disease is imperative in our developing country. Keywords: BMI, PEFR.

Download Full-text

SCIENTIFIC AND ENGINEERING PRINCIPLES OF EFFICIENT FUEL USE AND ENVIRONMENTALLY FRIENDLY GAS COMBUSTION IN STOVE PLATES. PART 1. MODERN STATE-OF-THE-ART AND DIRECTIONS FOR IMPROVEMENT THE GAS BURNING IN DOMESTIC GAS COOKERS

Energy Technologies & Resource Saving ◽

10.33070/etars.3.2017.01 ◽

2017 ◽

pp. 3-18 ◽

Cited By ~ 1

Author(s):

B.S. Soroka ◽

V.V. Horupa

Keyword(s):

Natural Gas ◽

Flow Rate ◽

Gas Flow ◽

Renewable Energy Sources ◽

Combustion Process ◽

Orifice Diameter ◽

Firing Process ◽

Gas Flow Rate ◽

Gas Combustion ◽

Gas Stoves

Natural gas NG consumption in industry and energy of Ukraine, in recent years falls down as a result of the crisis in the country’s economy, to a certain extent due to the introduction of renewable energy sources along with alternative technologies, while in the utility sector the consumption of fuel gas flow rate enhancing because of an increase the number of consumers. The natural gas is mostly using by domestic purpose for heating of premises and for cooking. These items of the gas utilization in Ukraine are already exceeding the NG consumption in industry. Cooking is proceeding directly in the living quarters, those usually do not meet the requirements of the Ukrainian norms DBN for the ventilation procedures. NG use in household gas stoves is of great importance from the standpoint of controlling the emissions of harmful components of combustion products along with maintenance the satisfactory energy efficiency characteristics of NG using. The main environment pollutants when burning the natural gas in gas stoves are including the nitrogen oxides NOx (to a greater extent — highly toxic NO2 component), carbon oxide CO, formaldehyde CH2O as well as hydrocarbons (unburned UHC and polyaromatic PAH). An overview of environmental documents to control CO and NOx emissions in comparison with the proper norms by USA, EU, Russian Federation, Australia and China, has been completed. The modern designs of the burners for gas stoves are considered along with defining the main characteristics: heat power, the natural gas flow rate, diameter of gas orifice, diameter and spacing the firing openings and other parameters. The modern physical and chemical principles of gas combustion by means of atmospheric ejection burners of gas cookers have been analyzed from the standpoints of combustion process stabilization and of ensuring the stability of flares. Among the factors of the firing process destabilization within the framework of analysis above mentioned, the following forms of unstable combustion/flame unstabilities have been considered: flashback, blow out or flame lifting, and the appearance of flame yellow tips. Bibl. 37, Fig. 11, Tab. 7.

Download Full-text