Macro-Rheology and Micro-Rheological Study of Composite Polymer Gel at High Salinity and Acidic Conditions for CO2 Shut Off Treatment in Harsh Reservoirs for Improving Oil Recovery

2019 ◽  
Author(s):  
Zeeshan Ali Lashari ◽  
Wanli Kang ◽  
Hongbin Yang ◽  
Hongwen Zhang ◽  
Bauyrzhan Sarsenbekuly
Keyword(s):  
Oil Recovery ◽  
High Salinity ◽  
Polymer Gel ◽  
Composite Polymer ◽  
Rheological Study ◽  
Acidic Conditions

scholarly journals NEW AQUEOUS POLYMER FOR HIGH-TEMPERATURE RESERVOIRS

2018 ◽  
Vol 15 (30) ◽  
pp. 380-386
Author(s):  
Y. V. SAVINYKH ◽  
L. D. LANG
Keyword(s):  
High Temperature ◽  
Oil Recovery ◽  
High Salinity ◽  
Sea Water ◽  
Polymer Flooding ◽  
Water Soluble ◽  
Water Flooding ◽  
Polymer Gel ◽  
Sweep Efficiency ◽  
Water Soluble Polymer

Polymer flooding is technologically simple and highly effective method of enhanced oil recovery. The method is based on adding a small amount of polymer in conventional water flooding of oil reservoirs. The increase in viscosity and the reduction of the mobility of injected water are to equalize the displacement front by slowing the moving of water in the highly permeable zones and restricting the formation of water finger. These factors help to increase the sweep efficiency and oil-water displacement efficiency during flooding. Polymer flooding has been used successfully in clastic and carbonate reservoirs, as well as in low-permeability reservoirs such as a fractured basement. However, most of the current polymer gel used for control water flows are decayed by a high content of ions Ca2+ and Mg2+ in formation water or in injected water. Similarly, polymer gels lose their stability at high reservoir temperature (above 70°C). Developing water-soluble polymer, which does not change their rheological properties under high salinity and high temperature (over 100°C), is very important when producing offshore, where sea water is commonly used for flooding (high salinity of 30-40 g/L).

The Combined Flooding of Dispersed Particle Gel and Surfactant for Conformance Control and EOR: From Experiment to Pilot Test

2021 ◽  
Author(s):  
Xia Yin ◽  
Tianyi Zhao ◽  
Jie Yi
Keyword(s):  
Oil Recovery ◽  
Formation Energy ◽  
High Salinity ◽  
Surfactant Solution ◽  
Pilot Test ◽  
Control Performance ◽  
Core Flooding ◽  
Displacement Efficiency ◽  
Conformance Control ◽  
And Performance

Abstract The water channeling and excess water production led to the decreasing formation energy in the oilfield. Therefore, the combined flooding with dispersed particle gel (DPG) and surfactant was conducted for conformance control and enhanced oil recovery in a high temperature (100-110°C) high salinity (>2.1×105mg/L) channel reservoir of block X in Tahe oilfield. This paper reports the experimental results and pilot test for the combined flooding in a well group of Block X. In the experiment part, the interfacial tension, emulsifying capacity of the surfactant and the particle size during aging of DPG were measured, then, the conformance control and enhanced oil recovery performance of the combined flooding was evaluated by core flooding experiment. In the pilot test, the geological backgrounds and developing history of the block was introduced. Then, an integrated study of EOR and conformance control performance in the block X are analyzed by real-time monitoring and performance after treatment. In addition, the well selection criteria and flooding optimization were clarified. In this combined flooding, DPG is applied as in-depth conformance control agent to increase the sweep efficiency, and surfactant solution slug following is used for improve the displacement efficiency. The long term stability of DPG for 15 days ensures the efficiency of in-depth conformance control and its size can increase from its original 0.543μm to 35.5μm after aging for 7 days in the 2.17×105mg/L reservoir water and at 110°C. In the optimization, it is found that 0.35% NAC-1+ 0.25% NAC-2 surfactant solution with interfacial tension 3.2×10-2mN/m can form a relatively stable emulsion easily with the dehydrated crude oil. In the double core flooding, the conformance control performance is confirmed by the diversion of fluid after combined flooding and EOR increases by 21.3%. After exploitation of Block X for 14 years, the fast decreasing formation energy due to lack of large bottom water and water fingering resulted in a decreasing production rate and increasing watercut. After combined flooding in Y well group with 1 injector and 3 producers, the average dynamic liquid level, daily production, and tracing agent breakthrough time increased, while the watercut and infectivity index decreased. The distribution rate of injected fluid and real-time monitoring also assured the conformance control performance. The oil production of this well group was increased by over 3000 tons. Upon this throughout study of combined flooding from experiment to case study, adjusting the heterogeneity by DPG combined with increasing displacement efficiency of surfactant enhanced the oil recovery synergistically in this high salinity high temperature reservoir. The criteria for the selection and performance of combined flooding also provides practical experiences and principles for combined flooding.

Application of Miscible Ethane Foam for Gas EOR Conformance in Low-Permeability Heterogeneous Harsh Environments

SPE Journal ◽  
2020 ◽  
Vol 25 (04) ◽  
pp. 1871-1883
Author(s):  
Mohamad Salman ◽  
Konstantinos Kostarelos ◽  
Pushpesh Sharma ◽  
Jae Ho Lee
Keyword(s):  
Oil Recovery ◽  
High Salinity ◽  
Total Dissolved Solids ◽  
Harsh Environments ◽  
Low Permeability ◽  
Type I ◽  
Fracture Networks ◽  
Operational Conditions ◽  
Minimum Miscibility Pressure ◽  
Carbon Dioxide Co2

Summary Unconventional plays pose a challenging set of operational conditions, including high temperature, high salinity, low permeability, and fracture networks. Aggressive development of these plays and the low primary recovery factors present an opportunity for using enhanced oil recovery (EOR) methods. This work presents a laboratory investigation of miscible ethane (C2H6) foam for gas EOR conformance in low-permeability, heterogeneous, harsh environments [<15 md, 136,000 ppm total dissolved solids (TDS) with divalent ions, 165°F]. The use of C2H6 as an alternative to carbon dioxide (CO2) offers several operational and availability strengths, which might expand gas EOR applications to depleted or shallower wells. Coupling gas conformance also helps improve displacement efficiencies and maximize overall recovery. Minimum miscibility pressure (MMP) displacement tests were performed for dead crude oil from the Wolfcamp Spraberry Trend area using C2H6 and CO2. Aqueous stability, salinity scan, and static foam tests were performed to identify a formulation. Subsequent foam quality and coreflood displacement tests in heterogeneous carbonate outcrop cores were conducted to compare the recovery efficiencies of three processes: gravity-unstable, miscible C2H6 foam; gravity-stable, miscible C2H6; and gravity-unstable, miscible C2H6 processes. Slimtube tests comparing C2H6 to CO2 resulted in a lower MMP value for C2H6. We identified a stable surfactant blend capable of Type I microemulsion and persistent foams in the presence of oil. Corefloods conducted with gravity-unstable miscible C2H6 foam, gravity-stable miscible C2H6, and gravity-unstable miscible C2H6 recovered 98.4, 61.9, and 42.6% oil originally in place, respectively. Our work shows that miscible C2H6 injection processes achieved significant recoveries even under gravity-unstable conditions. The addition of foam provides better conformance control, enhancing overall recovery at the laboratory scale, showing promise for field applications.

scholarly journals Modification of Xanthan Gum for a High-Temperature and High-Salinity Reservoir

Polymers ◽  
2021 ◽  
Vol 13 (23) ◽  
pp. 4212
Author(s):  
Mohamed Said ◽  
Bashirul Haq ◽  
Dhafer Al Shehri ◽  
Mohammad Mizanur Rahman ◽  
Nasiru Salahu Muhammed ◽  
...  
Keyword(s):  
High Temperature ◽  
Oil Recovery ◽  
Xanthan Gum ◽  
Elevated Temperatures ◽  
High Salinity ◽  
Residual Oil ◽  
Core Flooding ◽  
Nacl Solution ◽  
The Core ◽  
Tertiary Oil Recovery

Tertiary oil recovery, commonly known as enhanced oil recovery (EOR), is performed when secondary recovery is no longer economically viable. Polymer flooding is one of the EOR methods that improves the viscosity of injected water and boosts oil recovery. Xanthan gum is a relatively cheap biopolymer and is suitable for oil recovery at limited temperatures and salinities. This work aims to modify xanthan gum to improve its viscosity for high-temperature and high-salinity reservoirs. The xanthan gum was reacted with acrylic acid in the presence of a catalyst in order to form xanthan acrylate. The chemical structure of the xanthan acrylate was verified by FT-IR and NMR analysis. The discovery hybrid rheometer (DHR) confirmed that the viscosity of the modified xanthan gum was improved at elevated temperatures, which was reflected in the core flood experiment. Two core flooding experiments were conducted using six-inch sandstone core plugs and Arabian light crude oil. The first formulation—the xanthan gum with 3% NaCl solution—recovered 14% of the residual oil from the core. In contrast, the modified xanthan gum with 3% NaCl solution recovered about 19% of the residual oil, which was 5% higher than the original xanthan gum. The xanthan gum acrylate is therefore more effective at boosting tertiary oil recovery in the sandstone core.

Water-Flooding Fluid Diversion Copolymeric Microsphere Prepared by Inverse Suspension Polymerization

e-Polymers ◽  
2007 ◽  
Vol 7 (1) ◽  
Author(s):  
Huang Zhiyu ◽  
Lu Hongsheng ◽  
Zhang Tailiang
Keyword(s):  
Thermal Stability ◽  
High Temperature ◽  
Oil Recovery ◽  
High Salinity ◽  
Suspension Polymerization ◽  
Oil Reservoirs ◽  
Water Flooding ◽  
Toughness Index ◽  
Inverse Suspension Polymerization ◽  
Enhance Oil Recovery

Abstract In order to enhance oil recovery in high-temperature and high-salinity oil reservoirs, the copolymeric microspheres containing acrylamide (AM), acrylonitrile (AN) and AMPS was synthesized by inverse suspension polymerization. The copolymeric microsphere was very uniform and the size could be changed according to the condition of polymerization. The lab-scale studies showed that the copolymeric microsphere exhibit good salt-tolerance and thermal-stability when immersed in 20×105 mg/L NaCl(or KCl) solution, 7500 mg/L CaCl2 (or MgCl2) solution or 2000 mg/L FeCl3 solution, respectively. The copolymeric microsphere showed satisfactory absorbency rates. The sand-pipes experiments confirmed that the average toughness index was 1.059. It could enhance the oil recovery by about 3% compared with the corresponding irregular copolymeric particle.

scholarly journals Experimental Investigation of Chemical Flooding Using Nanoparticles and Polymer on Displacement of Crude Oil for Enhanced Oil Recovery

2020 ◽  
Vol 2020 ◽  
pp. 1-10
Author(s):  
Imran Akbar ◽  
Hongtao Zhou ◽  
Wei Liu ◽  
Muhammad Usman Tahir ◽  
Asadullah Memon ◽  
...  
Keyword(s):  
Fluid Flow ◽  
Enhanced Oil Recovery ◽  
Oil Recovery ◽  
Petroleum Industry ◽  
Chemical Flooding ◽  
Polymer Gel ◽  
Core Flooding ◽  
High Concentration ◽  
Remaining Oil ◽  
Water Cut

In the petroleum industry, the researchers have developed a new technique called enhanced oil recovery to recover the remaining oil in reservoirs. Some reservoirs are very complex and require advanced enhanced oil recovery (EOR) techniques containing new materials and additives in order to produce maximum oil in economic and environmental friendly manners. In this work, the effects of nanosuspensions (KY-200) and polymer gel HPAM (854) on oil recovery and water cut were studied in the view of EOR techniques and their results were compared. The mechanism of nanosuspensions transportation through the sand pack was also discussed. The adopted methodology involved the preparation of gel, viscosity test, and core flooding experiments. The optimum concentration of nanosuspensions after viscosity tests was used for displacement experiments and 3 wt % concentration of nanosuspensions amplified the oil recovery. In addition, high concentration leads to more agglomeration; thus, high core plugging takes place and diverts the fluid flow towards unswept zones to push more oil to produce and decrease the water cut. Experimental results indicate that nanosuspensions have the ability to plug the thief zones of water channeling and can divert the fluid flow towards unswept zones to recover the remaining oil from the reservoir excessively rather than the normal polymer gel flooding. The injection pressure was observed higher during nanosuspension injection than polymer gel injection. The oil recovery was achieved by about 41.04% from nanosuspensions, that is, 14.09% higher than polymer gel. Further investigations are required in the field of nanoparticles applications in enhanced oil recovery to meet the world's energy demands.

Sign in / Sign up

Export Citation Format

Share Document